SEARCH · Search NASA

Results for “Comparison study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2019

An International Laboratory Comparison Study of Volumetric and Gravimetric Hydrogen Adsorption Measurements

In order to determine a material's hydrogen storage potential, capacity measurements must be robust, reproducible, and accurate. Commonly, research reports focus on the gravimetric capacity, and often times the volumetric capacity is not reported. Determining volumetric capacities is not as straight-forward, especially for amorphous materials. This is the first study to compare measurement reproducibility across laboratories for excess and total volumetric hydrogen sorption capacities based on the packing volume. The use of consistent measurement protocols, common analysis, and figure of merits for reporting data in this study, enable the comparison of the results for two different materials. Importantly, the results show good agreement for excess gravimetric capacities amongst the laboratories. Irreproducibility for excess and total volumetric capacities is attributed to real differences in the measured packing volume of the material.

H2 storage↗

NASA NTRS1975

Lymphoid cell kinetics under continuous low dose-rate gamma irradiation: A comparison study

A comparison study was conducted of the effects of continuous low dose-rate gamma irradiation on cell population kinetics of lymphoid tissue (white pulp) of the mouse spleen with findings as they relate to the mouse thymus. Experimental techniques employed included autoradiography and specific labeling with tritiated thymidine (TdR-(h-3)). The problem studied involved the mechanism of cell proliferation of lymphoid tissue of the mouse spleen and thymus under the stress of continuous irradiation at a dose rate of 10 roentgens (R) per day for 105 days (15 weeks). The aim was to determine whether or not a steady state or near-steady state of cell population could be established for this period of time, and what compensatory mechanisms of cell population were involved.

Foster, B. R.↗

DOE OSTI2018

A comparison study on peridynamic models using irregular non-uniform spatial discretization

The applicability of peridynamic models to problems with irregular non-uniformly discretized solution domain is critical. In this study, a systematic comparison study on results predicted by eight peridynamic models, including bond-based, ordinary state-based and non-ordinary state-based mechanics and heat conduction models, for three different types of problems, including thermal, mechanical and coupled thermo-mechanical, with irregular spatial discretization are performed. It’s found that for the case of irregular but semi-uniform spatial discretization, all these models yield good predictions compared to analytical local solutions. For the case of irregular and non-uniform spatial discretization, models formulated specifically for this configuration give much better results than the conventional formulations which don’t consider the neighborhood difference among material points in the spatial discretization. As a result for either cases of spatial discretization, the bond-associated correspondence material model predicts the most accurate results.

42 ENGINEERING↗

DOE OSTI2018

Outcomes from a Collaborative Approach to a Code Comparison Study for Enhanced Geothermal Systems

A code comparison study, supported by the U.S. Department of Energy, Geothermal Technologies Office, has recently been completed whose stated purpose was to test, diagnose differences, and demonstrate the state of modeling capabilities developed at national laboratories and academic institutes within the United States for modeling enhanced geothermal systems. This three-year study comprised two sets of problems; those classified as benchmark problems and those classified as challenge problems. The benchmark problems were structured to test the ability of the collection of numerical simulators to solve various combinations of coupled thermal, hydrologic, geomechanical, and geochemical processes. This class of problems was strictly defined in terms of properties, driving forces, initial conditions, and boundary conditions. Study participants submitted solutions to problems for which their simulation tools were deemed capable or nearly capable. Some participating codes were originally developed for EGS applications whereas some others were designed for different applications but can simulate processes similar to those in EGS. Solution submissions from both were encouraged. In some cases participants made small incremental changes to their numerical simulation codes to address specific elements of the problem, and in other cases participants submitted solutions with existing simulation tools, acknowledging the limitations of the code. The challenge problems were based on the enhanced geothermal systems research conducted in hot dry rock at Fenton Hill, near Los Alamos, New Mexico, between 1974 and 1995, covering two research stimulation, development and circulation phases in two separate reservoirs. Both challenge problems have specific questions to be answered via numerical simulation in three topical areas: 1) reservoir creation/stimulation, 2) reactive and passive transport, and 3) thermal recovery. Whereas the benchmark class of problems were designed to test capabilities for modeling coupled processes under strictly specified conditions, the stated objective for the challenge class of problems was to demonstrate what new understanding of the Fenton Hill experiments could be realized via the application of modern numerical simulation tools by recognized expert practitioners. Critical observations and data from the Fenton Hill experiments were varied and scattered among a number of individual experiments, and numerical simulation solutions were sought that satisfied as many observations at possible. Achieving agreement in multiple experimental observations from Fenton Hill often required participants to critically think about stimulation mechanisms involving natural and hydraulic fractures and re-evaluate their conceptual models and numerical solution approaches. This process has yielded new insights to Fenton Hill reservoirs and direction for future EGS research. The keys to the success of this study were the high quality numerical simulation tools available, the expertise of the developers and practitioners, and the collaborative approach to reporting preliminary results among the study participants. This paper describes results submitted to the challenge problems and the outcomes of a collaborative approach to conducting a code comparison study.

Enhanced Geothermal Systems, numerical simulation,↗

DOE OSTI2020

LANL Critical Benchmark Comparison Study and Subsequent Revision

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2021

LANL Critical Benchmark Comparison Study and Subsequent Revision for Cases Involving LEU and MIX

As part of an international collaboration within the DOE Nuclear Criticality Safety Program (NCSP), LANL is involved in a comparison study to quantify differences in k-effective results from neutron transport simulations of critical benchmark experiments. The DOE NCSP Mission and Vision details the activity in which the French Institut de Radioprotection et de Sûreté Nucléaire (IRSN) leads the study with LANL, ORNL, and LLNL to compare results of various neutron transport codes and nuclear data libraries for ICSBEP benchmarks held in common by the entities. The task statement from the DOE NCSP Five-Year Execution Plan is given as: "The proposal is for IRSN to lead a new intercomparison based on the MORET code with the latest JEFF-3.3 data and ENDF/B-VIII.0 data, when available, using their existing comprehensive selection of 2,714 benchmarks and collate their results together with those from LLNL (COG), LANL (MCNP) and ORNL (SCALE). Due to the large number of benchmarks involved, this effort is envisioned to take three years with an additional year for IRSN to complete a summary report. The benchmark development will be performed independently to minimize modeling errors through discovery and resolution of discrepant results. A summary report will be generated (led by IRSN) to document the results of this study." This report documents results obtained for revisions made to cases involving Intermediate Enriched Uranium (IEU) and a mixture of Pu and Uranium (MIX), with a focus on the changes made to LANL benchmarks modeled with MCNP6 using ENDF/B-VII.1 nuclear data that appeared to have discrepant results when compared with results of other codes. Feedback was used to pinpoint review of particular benchmark input files and to revise them when necessary. This report documents the results of review and revision of specific benchmarks highlighted as possibly discrepant in the comparison study. In addition, there is an effort tied to this work involving collaboration between LANL XCP and NCS Divisions in the development of a shared review/revision procedure and use of a new benchmark repository.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NASA NTRS1992

Process comparison study. MSFC Center Director's Discretionary Fund (CDDF)

A process comparison study was conducted using four different advanced manufacturing techniques to fabricate a composite solid rocket booster systems tunnel cover. Costs and labor hours were tracked to provide the comparison between the processes. A relative structural comparison of the components is also included. The processes utilized included filament winding, pultrusion, automated tape laying, and thermoplastic thermoforming. The hand layup technique is also compared. Of the four advanced processes evaluated, the thermoformed thermoplastic component resulted in the least total cost. The automated tape laying and filament winding techniques closely followed the thermoplastic component in terms of total cost; and, these techniques show the most promise for high quality components and lower production costs. The pultruded component, with its expensive tooling and material requirements, was by far the most expensive process evaluated, although the results obtained would not be representative of large production runs.

Golden, T.↗

NASA NTRS1989

Comparison study of gear dynamic computer programs at NASA Lewis Research Center

A comparison study was performed on four gear dynamic analysis computer programs developed under NASA/Army sponsorship. These programs are GRDYNMULT (a multimesh program applicable to a number of epicyclic systems), TELSGE (a single mesh program), PGT (a multimesh program applicable to a planetary system with three planets), and DANST (a single mesh program). The capabilities and features, input and output options, and technical aspects of the programs were reviewed and compared. Results are presented in a concise tabular form. Parametric studies of the program models were performed to investigate the predicted results of the programs as input parameters such as speed, torque, and mesh damping were varied. In general, the program models predicted similar dynamic load and stress levels as operating conditions were varied. Flash temperature predictions from programs GRDYNMULT and TELSGE indicated similar trends; however, actual values were not in close agreement. The program GRDYNMULT was found to be the most versatile in system size, type, and analysis capabilities. The programs DANST, TELSGE, and PGT are more specialized for specific systems; however, in specific areas they provide a more detailed treatment than GRDYNMULT.

Zakrajsek, James J.↗

DOE OSTI2018

Excluding Benchmark Statistical Outliers in Nuclear Criticality Safety Validation: A Comparison Study of Upper Subcritical Limits for Plutonium Systems using Whisper-1.1

Neutron transport methods used to establish subcriticality require validation by comparison to critical experiments considered to be benchmarks. Whisper is a sensitivity/uncertainty analysis tool developed to assist with the task of validation in nuclear criticality safety. Details on the Whisper methodology can be found in References 1-3 on the MCNP® reference collection website at https://mcnp.lanl.gov. During the process of validation there can be cases where a benchmark experiment may be found to be a statistical outlier, in which the calculated k-effective value and the experiment k-effective value differ by an amount atypical for similar experiments. A methodology optionally employed by Whisper is the exclusion of statistical outliers based upon the iterative diagonal chi-squared statistical rejection technique. Alternatively, there is an option to include all benchmarks in the Whisper library collection, even those benchmarks found to be statistical outliers, when computing the bias, bias uncertainty and margin of subcriticality (MOS) leading to establishment of the baseline upper subcritical limit (USL). A comparison study has been done to compute USLs with and without statistical outliers in the Whisper benchmark collection to determine what effect rejection of statistical outliers has on the recommended USL. The results show little overall difference in the recommended baseline USLs developed by Whisper when excluding statistical outliers. Additionally, there does not appear to be a clear trend in predicting whether the baseline USL will be higher or lower when rejecting statistical outliers from the benchmark critical experiment collection used for validation.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

DOE OSTI2022

Micropillar Compression of Additively Manufactured 316L Stainless Steels after 2 MeV Proton Irradiation: A Comparison Study between Planar and Cross-Sectional Micropillars

A micropillar compression study with two different techniques was performed on proton-irradiated additively manufactured (AM) 316L stainless steels. The sample was irradiated at 360 °C using 2 MeV protons to 1.8 average displacement per atom (dpa) in the near-surface region. A comparison study with mechanical test and microstructure characterization was made between planar and cross-sectional pillars prepared from the irradiated surface. While a 2 MeV proton irradiation creates a relatively flat damage zone up to 12 µm, the dpa gradient by a factor of 2 leads to significant dpa uncertainty along the pillar height direction for the conventional planar technique. Cross-sectional pillars can significantly reduce such dpa uncertainty. From one single sample, three cross-sectional pillars were able to show dpa-dependent hardening. Furthermore, post-compression transmission electron microscopy allows the determination of the deformation mechanism of individual micropillars. Cross-sectional micropillar compression can be used to study radiation-induced mechanical property changes with better resolution and less data fluctuation.

transmission electron microscopy↗

NASA NTRSDate not supplied

Comparison Study of Machine Learning Techniques to Predict Flight Energy Consumption for Advanced Air Mobility

This paper addresses the need to predict the flight energy consumption of aerial vehicles in the presence of wind using machine learning techniques. The presented work is critical to achieving sustainable and efficient operations for Advanced Air Mobility (AAM) and to evaluating the readiness of the ground-supporting energy infrastructure, e.g., electric grid and AAM portals. The flight energy consumption is described using the "energy per meter" (EPM) metric. We present a comparison study of influential machine learning techniques in predicting EPM using real-world flight test data. We presented new results of using the Decision Tree, Random Forest, and linear regression techniques, along with our previous results using the Recurrent Neural Network and Feed Forward Neural Network techniques. The comparison results show that the Linear Regression method outperforms other methods on the basis of the Mean Squared Error and error variance.

Machine Learning↗

NASA NTRS1989

A day-to-day comparison study of Seasat scatterometer winds with winds observed from islands in the tropical Pacific

The winds derived from the Seasat-A Satellite Scatterometer (SASS) measurements have been the subject of great interest since the 1978 mission, because of the promise of radically improved wind observations over the world ocean. Due to the early end of the mission, only a few of the planned ground truth validation experiments could be made, and the subsequent lack of sufficient high quality independent wind data for comparison has limited the ability to resolve critical issues regarding the scatterometer's performance and the correct interpretation of its signal. Operational weather observations were made of ocean winds independent of Seasat mission plans during the Seasat mission period; the results are reported of a comparison study using such observations. Previous verification with in situ winds has been primarily in middle latitudes (GOASEX, JASIN, and NDBO buoys); winds observed from nine tropical Pacific islands are compared with nearly contemporaneous measurements taken by SASS during overpasses of the islands.

Davison, Jerry↗

DOE OSTI2022

Summary of LANL Critical Benchmark Comparison Study and Revisions for Cases Involving HEU, LEU, MIX, and Pu

This report documents results obtained for revisions made to cases involving Highly Enriched Uranium (HEU), Intermediate Enriched Uranium (IEU), a mixture of Pu and Uranium (MIX), as well as Pu cases. A previous summary of revisions for HEU an Pu cases was reported and additional investigations into four cases originally presented therein uncovered further revisions which led to better agreement with other transport codes, those cases are updated in this report. The summary of all cases reported in Reference 2 is updated in this report. In addition, a previous summary of revisions for LEU and MIX was reported, a summary of those revisions in reproduced in this report for a comprehensive summary of changes to benchmarks beginning in fiscal year 2020 to current date. The report focuses on the changes made to LANL benchmarks modeled with MCNP6 using ENDF/B-VII.1 nuclear data that appeared to have discrepant results when compared with results of other codes. Feedback was used to pinpoint review of benchmark input files and to revise them when necessary. This report documents the results of review and revision of specific benchmarks highlighted as possibly discrepant in the comparison study. In addition, there is an effort tied to this work involving collaboration between LANL XCP and NCS Divisions in the development of a shared review/revision procedure and use of a new benchmark repository. LANL has a benchmark library of critical experiments from the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook modeled for use with MCNP. This collection is now over 1100 benchmarks, referred to as the Whisper-1.1 library because it is used with the sensitivity/uncertainty package, Whisper, which supports nuclear criticality safety validation and is released with MCNP6.2. The collection, originally created several decades ago, is a combination of smaller collections, which has been revised and expanded, by various groups at LANL over the years. The original authors are no longer at the laboratory and little formal documentation of review and revision of these benchmarks exists today. A branch of the benchmark collection was already the subject of a formal review undertaken by the LANL NCS Division and expanded to include XCP Division.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Overcharge-to-thermal-runaway behavior and safety assessment of commercial lithium-ion cells with different cathode materials: A comparison study

In this paper, overcharge behaviors and thermal runaway (TR) features of large format lithium-ion (Li-ion) cells with different cathode materials (LiFePO 4 (LFP), Li[Ni 1/3 Co 1/3 Mn 1/3 ]O 2 (NCM111), Li[Ni 0.6 Co 0.2 Mn 0.2 ]O 2 (NCM622) and Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 (NCM811)) were investigated. The results showed that, under the same overcharge condition, the TR of LFP Li-ion cell occurred earlier compared with the NCM Li-ion cells, indicating its poor overcharge tolerance and high TR risk. However, when TR occurred, LFP Li-ion cell exhibited lower maximum temperature and mild TR response. All NCM Li-ion cells caught fire or exploded during TR, while the LFP Li-ion cell only released a large amount of smoke without fire. According to the overcharge behaviors and TR features, a safety assessment score system was proposed to evaluate the safety of the cells. In short, NCM Li-ion cells have better performance in energy density and overcharge tolerance (or low TR risk), while LFP Li-ion cell showed less severe response to overcharging (or less TR hazards). For NCM Li-ion cells, as the ratio of nickel in cathode material increases, the thermal stability of the cathode materials becomes poorer, and the TR hazards increase. Such a comparison study on large format Li-ion cells with different cathode materials can provide deeper insights into the overcharge behaviors and TR features, and provide guidance for engineers to reasonably choose battery materials in automotive applications.

25 ENERGY STORAGE↗

DOE OSTI2021

Molecular level study of uni/multi-axial deformation response of tobermorite 11 Å: A force field comparison study

Molecular deformation response of tobermorite 11 Å (a mineral analogue to C-S-H, the primary constituent of hydrated cement paste) under uni/tri-axial loading (both tension and compression) has been investigated in this manuscript using empirical and reactive force fields. A comparison has been chalked out amongst the responses using different force fields. Evolution of atomic environment during the deformation have studied using reactive force field. This study demonstrate the key observations on the application of different force fields to study the large deformation behaviour of the material.

36 MATERIALS SCIENCE↗

NASA NTRS1972

Development of termination and utilization concepts for flat conductor cables. Volume 3: Cost study comparison, flat versus round conductor cable

A cost study comparing flat conductor cable (FCC) with small-gage wire (SGW) and conventional round conductor cable (RCC) is presented. This study was based on a vehicle wiring system consisting of 110,000 ft of conventional RCC equally divided between AWG sizes 20,22, and 24 using MIL-W-81044-type wire and MIL-C-26500 circular connectors. Basic cost data were developed on a similar-sized commercial jet airplane wiring system on a previous company R&D program in which advanced wiring techniques were carried through equivalent installations on an airplane mockup; and on data developed on typical average bundles during this program. Various cost elements included were engineering labor, operations (manufacturing) labor, material costs, and cost impact on payload. Engineering labor includes design, wiring system integration, wiring diagrams and cable assembly drawings, wire installations, and other related supporting functions such as the electronic data processing for the wiring. Operations labor includes mockup, tooling and production planning, fabrication, assembly, installation, and quality control cost impact on payload is the conversion of wiring system weight variations through use of different wiring concepts to program payload benefits in terms of dollars.

Source record↗

DOE OSTI2020

An international code comparison study on coupled thermal, hydrologic and geomechanical processes of natural gas hydrate-bearing sediments

Not Available

58 GEOSCIENCES↗

NASA NTRS1977

Geology orbiter comparison study

Instrument requirements of planetary geology orbiters were examined with the objective of determining the feasibility of applying standard instrument designs to a host of terrestrial targets. Within the basic discipline area of geochemistry, gamma-ray, X-ray fluorescence, and atomic spectroscopy remote sensing techniques were considered. Within the discipline area of geophysics, the complementary techniques of gravimetry and radar were studied. Experiments using these techniques were analyzed for comparison at the Moon, Mercury, Mars and the Galilean satellites. On the basis of these comparative assessments, the adaptability of each sensing technique was judged as a basic technique for many targets, as a single instrument applied to many targets, as a single instrument used in different mission modes, and as an instrument capability for nongeoscience objectives.

Cutts, J. A. J.↗