Search NASA⌕ Search

SEARCH · Search NASA

Results for “Confined Spaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Tool for Bending a Metal Tube Precisely in a Confined Space

A relatively simple, manually operated tool enables precise bending (typically, within 1/2 of the specified bend angle) of a metal tube located in a confined space, with a minimum of flattening of the tube and without significant gouging of the tube surface. The tool is designed for use in a situation in which the tube cannot be removed from the confined space for placement in a conventional benchmounted tube bender. The tool is also designed for use in a situation in which previously available hand-held tube benders do not afford the required precision, do not support the tube wall sufficiently to prevent flattening or gouging, and/or do not fit within the confined space. The tool is designed and fabricated for the specific outer diameter and bend radius of the tube to be bent. The tool (see figure) includes a clamping/radius block and a top clamping block that contain mating straight channels of semicircular cross section that fit snugly around the tube. The mating portions of the clamping/radius block and the top clamping block are clamped around a length of the tube that is adjacent to the bend and that is intended to remain straight. The clamping/radius block is so named because beyond the straight clamping section, its semicircular channel extends to a non-clamping section that is curved at the specified bend radius. A pivot hole is located in the clamping/radius block at the center of the bend circle. The tool includes a bending block that, like the other blocks, contains a straight semicircular channel that fits around the outside of the tube. The bending block contains a pivot hole to be aligned with the pivot hole in the clamping/radius block. Once the tube has been clamped between the clamping/ radius and top clamping blocks, the bending block is placed around the tube, the pivot holes are aligned, and a pivot pin is inserted through the pivot holes.

Davis, Gary T.↗
NASA NTRS1986

Flex Circuitry for Confined Spaces

To facilitate installation of electronic equipment in confined spaces, circuitry preassembled on flexible wiring. Mother boards, large bypass capacitors, and interface connectors mounted on flexible wiring and tested before installation. Flexible circuits eliminate need for in-place hardwiring and allow smaller enclosures to be used.

Fitzpatrick, J. B.↗
NASA NTRS1993

Torque-Wrench Adapter For Confined Spaces

Adapter for torque wrench tightens nuts in confined spaces. Allows full rotation of nuts with minimum clearance of wrench. Adapter, spanner-type attachment that fits on end of standard torque wrench. Pair of dowel pins centers and locks wrench onto nut. Used to apply torque of 40 lb-in, also withstands torques up to 100 lb-ft.

Littlefield, Alan↗
NASA NTRS2011

Two New Pieces of Emergency Response Equipment for use in Confined Space Environments

NASA is developing two new pieces of emergency response equipment that recognize and address the constraints of a confined space environment. One piece of equipment is a respirator designed for use in a post fire environment. Traditional first responders generally use supplied air respirators - they provide cool, dry, safe breathing air to the first responder, and because they are supplied at above ambient pressure, the system is tolerant to a loose-fitting mask. Supplied air respirators have a limited supply of air, but because the traditional first responder intends to address the emergency from outside and then retreat, this limited air supply does not pose a serious problem. NASA uses a supplied oxygen respirator for first response to an emergency affecting air quality on the International Space Station. The air supply is rated for 15 minutes - ISS program managers sponsored a hardware development activity to provide the astronauts up to 8 hours of breathing protection after the supplied air system is exhausted. Size and weight limitations prevent the use of a supplied air system for 8 hours for six crew members. A trade study resulted in the selection of a filtering respirator system over a re-breather system; due to design simplicity, operational simplicity, and likely threats to air quality on ISS. The respirator cartridge that filters smoke particles, adsorbs organics and acid gases, and catalytically converts carbon monoxide to carbon dioxide has been qualified for use on ISS, and was delivered on STS-135, the final mission of the Space Shuttle Program.

Graf, John↗
NASA NTRS2011

Super Dwarf Wheat for Growth in Confined Spaces

USU-Perigee is a dwarf red spring wheat that is a hybrid of a high-yield early tall wheat (USU-Apogee) and a low-yield, extremely short wheat that has poor agronomic characteristics. USU-Perigee was selected for its extremely short height (.0.3 m) and high yield . characteristics that make it suitable for growth in confined spaces in controlled environments. Other desirable characteristics include rapid development and resistance to a leaf-tip necrosis, associated with calcium deficiency, that occurs in other wheat cultivars under rapid-growth conditions (particularly, continuous light). Heads emerge after only 21 days of growth in continuous light at a constant temperature of 25 C. In tests, USU-Perigee was found to outyield other full dwarf (defined as <0.4 m tall) wheat cultivars: The yield advantage at a constant temperature of 23 C was found to be about 30 percent. Originally intended as a candidate food crop to be grown aboard spacecraft on long missions, this cultivar could also be grown in terrestrial growth chambers and could be useful for plant-physiology and -pathology studies.

Bugbee, Bruce↗
NASA NTRS1969

Two-axis winch installer for heavy ducts in confined space

Two-axis winching and traversing device is used for installing liquid-propellant rocket-engine fuel and liquid oxygen suction ducts between the valves and the rocket engine on a test stand. The device raises and maneuvers the duct into the required position where it can be safely installed by mechanics.

Cox, E. F.↗
NASA NTRS1990

Removing Burrs In Confined Spaces

Special tool proposed to remove burrs on ring edges left by operations of hollow mill near bases of round posts. Conceived because posts placed so closely together that ordinary and makeshift tools damage adjacent posts and difficult or impossible to use in narrow, deep spaces surrounding edges to be deburred. Designed specifically for use on hollow liquid-oxygen-injector posts of spacecraft engine, general tool concept adaptable to similar deburring problems on otherwise inaccessible parts.

Windbiel, Friedrich↗