Search NASA⌕ Search

SEARCH · Search NASA

Results for “Constant Rate Production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Solar neutrino: Flux, cosmic rays and the 11 year solar cycle

It is shown that the results of maximum likelihood treatment of Monte Carlo simulation with constant production rate of 7.6 SNU and 1.Epsilon SNU are consistent with the constant production rate when the tests of hypotheses (e.g., t-test, sigma squared-test, Wilcoxon-Mann-Whitney test, run test, etc.) are applied to the two groups of data formed from sunspot minimum range and sunspot maximum range, whereas the real data pulsates with the solar activity cycle. It is shown that SN flux-change is in opposition phase to the solar activity cycle and lags behind the latter by about one year. A correlation between SN flux and the cosmic rays is suggested.

Raychaudhuri, P.↗
NASA NTRS1980

Laser flash photolysis of ozone - O/1D/ quantum yields in the fall-off region 297-325 nm

The wavelength dependence of the quantum yield for O(1D) production from ozone photolysis has been determined between 297.5 nm and 325 nm in order to resolve serious discrepancies among previous studies. The results of this investigation are compared to earlier work by calculating atmospheric production rate constants for O(1D). It is found that for the purpose of calculating this rate constant, there is now good agreement among three studies at 298 K. Furthermore, it appears that previous data on the temperature dependence of the O(1D) quantum yield fall-off is adequate for determining the vertical profile of the O(1D) production rate constant. Several experimental difficulties associated with using NO2(asterisk) chemiluminescence to monitor O(1D) have been identified.

Brock, J. C.↗
DOE OSTI2025

Pu-238 Production Progress at Idaho National Laboratory From December 2023 to November 2024

Idaho National Laboratory (INL) has continued in the effort to produce Pu-238 to support NASA deep space missions. In support of the production goal of contributing 700 g to the 1.5 kg per year constant rate production of Pu-238 heat source material in the United States by 2026. All available inner core positions of the Advanced Test Reactor (ATR) have been qualified for production for a 20% Np target, with efforts nearing completion for a 30% Np target further increasing production amounts. This includes the North East Flux Trap (NEFT), South Flux Trap (SFT), Inner A, H positions. With the completion of qualifying the inner core of ATR, work has started on the qualifying the outer core. The portion of the outer core that will produce Pu-238 includes the Large and Medium I positions. With the continued qualification work, INL is on track to contribute to the production goal by 2026.

07 - ISOTOPES AND RADIATION SOURCES↗
NASA NTRS2000

Rate Constant and RRKM Product Study for the Reaction Between CH3 and C2H3 at T = 298K

The total rate constant k1 has been determined at P = 1 Torr nominal pressure (He) and at T = 298 K for the vinyl-methyl cross-radical reaction CH3 + C2H3 yields products. The measurements were performed in a discharge flow system coupled with collision-free sampling to a mass spectrometer operated at low electron energies. Vinyl and methyl radicals were generated by the reactions of F with C2H4 and CH4, respectively. The kinetic studies were performed by monitoring the decay of C2H3 with methyl in excess, 6 < |CH3|(sub 0)/|C2H3|(sub 0) < 21. The overall rate coefficient was determined to be k1(298 K) = (1.02 +/- 0.53)x10(exp -10) cubic cm/molecule/s with the quoted uncertainty representing total errors. Numerical modeling was required to correct for secondary vinyl consumption by reactions such as C2H3 + H and C2H3 + C2H3. The present result for k1 at T = 298 K is compared to two previous studies at high pressure (100-300 Torr He) and to a very recent study at low pressure (0.9-3.7 Torr He). Comparison is also made with the rate constant for the similar reaction CH3 + C2H5 and with a value for k1 estimated by the geometric mean rule employing values for k(CH3 + CH3) and k(C2H3 + C2H3). Qualitative product studies at T = 298 K and 200 K indicated formation of C3H6, C2H2, and C2H5 as products of the combination-stabilization, disproportionation, and combination-decomposition channels, respectively, of the CH3 + C2H3 reaction. We also observed the secondary C4H8 product of the subsequent reaction of C3H5 with excess CH3; this observation provides convincing evidence for the combination-decomposition channel yielding C3H5 + H. RRKM calculations with helium as the deactivator support the present and very recent experimental observations that allylic C-H bond rupture is an important path in the combination reaction. The pressure and temperature dependencies of the branching fractions are also predicted.

Thorn, R. Peyton, Jr.↗
NASA NTRS1996

Cosmic-Ray-Exposure Ages of Diogenites and the Collisional History of the HED Parent Body or Bodies

Cosmic-ray-exposure ages of meteorites provide information on the collisional history of their parent bodies and the delivery mechanism of meteorites to Earth. The exposure-age distributions of ordinary chondrites show distinct patterns for H, L, and LL types, consistent with their origin on different parent bodies. The exposure-age distributions of howardites, eucrites. and diogenites (HEDS) show a common pattern with major peaks at 22 Ma and 38 Ma This provides additional evidence for a common origin of the HED meteorites, possibly 4 Vesta, although orbital dynamics calculations showed that the delivery of meteorites from Vesta to Earth is difficult. However, the discovery of several kilometer-sized Vesta-like asteroids in the region between Vesta and the 3:1 resonance suggested that these seem more likely parent bodies of the HEDs than Vesta itself. This implies that the exposure-age clusters may represent samples of several parent bodies. Therefore, the near-absence of diogenites with ages <20 Ma might be of interest for the composition of these kilometer-sized fragments of Vesta. Here we present cosmic-ray-exposure ages of 20 diogenites, including 9 new meteorites. In addition, we calculate the probability for each peak to occur by chance, assuming a constant production rate of HED fragments.

Welten, K. C.↗
NASA NTRS1973

Product distributions and rate constants for ion-molecule reactions in water, hydrogen sulfide, ammonia, and methane

The thermal energy, bimolecular ion-molecule reactions occurring in gaseous water, hydrogen sulfide, ammonia, and methane have been identified and their rate constants determined using ion cyclotron resonance methods. Absolute rate constants were determined for the disappearance of the primary ions by using the trapped ion method, and product distributions were determined for these reactions by using the cyclotron ejection method. Previous measurements are reviewed and compared with the results using the present methods. The relative rate constants for hydrogen-atom abstraction, proton transfer, and charge transfer are also determined for reactions of the parent ions.

Huntress, W. T., Jr.↗
DOE OSTI2021

Mechanism and kinetics of the oxidation of 1,3-butadien-1-yl (n-C 4 H 5 ): a theoretical study

Here, ab initio CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G(d,p) calculations of the C 4 H 5 O 2 potential energy surface have been combined with Rice–Ramsperger–Kassel–Marcus Master Equation (RRKM-ME) calculations of temperature- and pressure-dependent rate constants and product branching ratios to unravel the mechanism and kinetics of the n-C 4 H 5 + O 2 reaction. The results indicate that the reaction is fast, with the total rate constant being in the range of 3.4–5.6 × 10 –11 cm 3 molecule –1 s –1 . The main products include 1-oxo-n-butadienyl + O and acrolein + HCO, with their cumulative yield exceeding 90% at temperatures above 1500 K. Two conformers of 1-oxo-n-butadienyl + O are formed via a simple mechanism of O 2 addition to the radical site of n-C 4 H 5 followed by the cleavage of the O–O bond proceeding via a van der Waals C 4 H 5 O∙∙∙O complex. Alternatively, the pathways leading to acrolein + HCO involve significant reorganization of the heavy-atom skeleton either via formal migration of one O atom to the opposite end of the molecule or its insertion into the C1–C2 bond. Not counting thermal stabilization of the initial peroxy adducts, which prevails at low temperatures and high pressures, all other products share a minor yield of under 5%. Rate constants for the significant reaction channels have been fitted to modified Arrhenius expressions and are proposed for kinetic modeling of the oxidation of aromatic molecules and 1,3-butadiene. As a secondary reaction, n-C 4 H 5 + O 2 can be a source for the formation of acrolein observed experimentally in oxidation of the phenyl radical at low combustion temperatures, whereas another significant (secondary) product of the C 6 H 5 + O 2 reaction, furan, could be formed through unimolecular decomposition of 1-oxo-n-butadienyl. Both the n-C 4 H 5 + O 2 reaction and unimolecular decomposition of its 1-oxo-n-butadienyl primary product are shown not to be a substantial source of ketene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Formation of Phenanthrene via Recombination of Indenyl and Cyclopentadienyl Radicals: A Theoretical Study

This work presents quantum chemical G3(MP2,CC)//B2PLYPD3/6-311G(d,p) calculations of the potential energy surface for the indenyl (C 9 H 7 ) + cyclopentadienyl (C 5 H 5 ) reaction followed by unimolecular decomposition of the C 14 H 11 radicals formed as the primary products, as well as the Rice–Ramsperger–Kassel–Marcus master equation (RRKM-ME) calculations to predict temperature- and pressure-dependent reaction rate constants and product branching ratios. The reaction begins with the barrierless recombination of indenyl and cyclopentadienyl forming a C 14 H 12 molecule with a new C–C bond connecting two five-membered rings, which subsequently dissociates to C 14 H 11 radicals by H losses. The primary products of the C 9 H 7 + C 5 H 5 → C 14 H 11 + H reaction can directly decompose by another H loss to benzofulvalene, and this pathway is most favorable in terms of the entropy factor and hence is preferable at higher temperatures. Otherwise, the initial C 14 H 11 isomers can undergo significant structural rearrangements before eliminating an H atom and producing phenanthrene, anthracene, or benzoazulenes, among which the formation of phenanthrene via the “spiran” pathway is clearly preferred. The calculated barriers along the computed favorable dissociation pathways are relatively low, in the ~30–40 kcal/mol range, making the C 14 H 11 radicals unstable at temperatures above 1000–1250 K at 1 atm. The results of RRKM-ME calculations show that, under typical combustion conditions, the decomposition of the C 14 H 11 radicals predominantly leads to benzofulvalene. However, the latter can be rapidly converted to phenanthrene via H-assisted isomerization with the rate constant for the benzofulvalene + H → phenanthrene + H reaction being close to 10 –11 cm 3 molecule –1 s –1 at 1000–1500 K and 1 atm. Here, the results provide further support for the hypothesis that recombination of two π radicals containing five-membered rings can lead to a growth of PAH with the formation of two fused six-membered rings, but the reaction mechanism may not be direct and is likely to involve two consecutive H atom losses leading to a fulvalene-like product, with subsequent H-assisted isomerization of the latter to a benzenoid PAH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

A molten Salt Am242M Production Reactor for Space Applications

The use of Am242m holds great promise for increasing the efficiency nuclear thermal rocket engines. Because Am242m has the highest fission cross section of any known isotope (1000's of barns), its extremely high reactivity may be used to directly heat a propellant gas with fission fragments. Since this isotope does not occur naturally, it must be bred in special production reactors designed for that purpose. The primary advantage to using molten salt reactors for breeding Am242m is that the reactors can be reprocessed continually yielding a constant rate of production of the isotope. Once built and initially fueled, the reactor will continually breed the additional fuel it needs to remain critical. The only feedstock required is a salt of U238. No enriched fuel is required during normal operation and all fissile material, except the Am242m, is maintained in a closed loop. For a reactor operating at 200 MW several kilograms of Am242m may be bred each year.

Emrich, William↗
NASA NTRS1978

Reactions of OH/+/ and H2O/+/ ions with some diatomic and simple polyatomic molecules

The rate constants and product distributions of the reactions of OH(+) and H2O(+) with some diatomic and simple polyatomic molecules were studied by ion cyclotron resonance (ICR) mass spectrometric techniques. Reaction rates with CO, NO, O2, N2, CO2, H2S, N2O, H2CO, CH4 and CD4 were measured. Charge transfer and proton transfer were generally observed in cases for which the reaction channel is exothermic, but processes involving rearrangement were not found.

Karpas, Z.↗
DOE OSTI2024

History of Pu-238 Production Restart Efforts at Idaho National Laboratory and Oak Ridge National Laboratory

In the early 2010s, efforts to restart production in the U.S. of plutonium-238 heat source (HSPu) material for NASA deep space missions were initiated. Processes, procedures, hardware, and chemical separations were developed and implemented to enable the production of heat source material at Oak Ridge National Laboratory (ORNL) and Idaho National Laboratory (INL). Here, this review provides an overview of the timeline and efforts associated with the restart of production, as well as upcoming efforts to increase production.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Theoretical study of the reaction mechanism and kinetics of the phenyl + propargyl association

Potential energy surface for the phenyl + propargyl radical recombination reaction has been studied at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G** level of theory for the closed-shell singlet species and at the triplet–singlet gap CASPT2/cc-pVTZ-CCSD(T)-F12/cc-pVTZ-f12//CASSCF/cc-pVTZ level of theory for the diradical species. High-pressure limit rate constants for the barrierless channels were evaluated with variable reaction coordinate transition state theory (VRC-TST). Rice–Ramsperger–Kassel–Marcus Master Equation (RRKM-ME) calculations have been performed to assess temperature- and pressure-dependent phenomenological rate constants and product branching ratios. Here, the entrance channels of the radical association reaction produce 3-phenyl-1-propyne and phenylallene which can further dissociate/isomerize into a variety of unimolecular and bimolecular products. Theoretical evidence is presented that, at combustion relevant conditions, the phenyl + propargyl recombination provides a feasible mechanism for the addition of a second five-member ring to the first six-member aromatic ring producing the prototype two-ring species indene and indenyl. Rate expressions for all important reaction channels in a broad range of temperatures and pressures have been generated for kinetic modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Formation of phenanthrenyl radicals via the reaction of acenaphthyl with acetylene

Ab initio G3(MP2,CC)/B3LYP/6–31G** calculations of the potential energy surface for the reaction of 3-acenaphthyl radical with acetylene were combined with Rice-Ramsperger-Kassel-Marcus Master Equation calculations of the temperature- and pressure-dependent reaction rate constants and product branching ratios with the goal to examine the transformation of an edge five-membered ring into a six-membered one. The reaction mechanism has been shown to contain two stages: (1) the formation of 3-ethynylacenaphthylene + H in the 3-acenaphthyl + C 2 H 2 reaction via acetylene addition to the radical site and an H loss, (2) the formation of the 1-phenanthrenyl radical in the 3-ethynylacenaphthylene + H reaction via H addition to the five-membered ring followed by the ring flip. The results of kinetic modeling show this pathway being faster than the pathway proposed earlier featuring the CCH chemisorption on the six-membered ring without involvement of the five-membered ring. A kinetic test demonstrated the dominance of the former pathway for the formation of pyrene from naphthalene. Here, it is expected that the new mechanism plays a major role in the transformation of five-membered rings on edges of PAH structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Theoretical Study of the Phenoxy Radical Recombination with the O( 3 P) Atom, Phenyl plus Molecular Oxygen Revisited

Quantum chemical calculations of the C 6 H 5 O 2 potential energy surface (PES) were carried out to study the mechanism of the phenoxy + O( 3 P) and phenyl + O 2 reactions. CASPT2(15e,13o)/CBS//CASSCF(15e,13o)/DZP multi-reference calculations were utilized to map out the minimum energy path for the entrance channels of the phenoxy + O( 3 P) reaction. Stationary points on the C 6 H 5 O 2 PES were explored at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311++G** level for the species with a single-reference character of the wave function and at the CASPT2(15e,13o)/CBS//B3LYP/6-311++G** level of theory for the species with a multi-reference character of the wave function. Conventional, variational, and variable reaction coordinate transition state theories were employed in Rice-Ramsperger-Kassel-Marcus Master Equation calculations to assess temperature- and pressure-dependent phenomenological rate constants and product branching ratios. Here, the main bimolecular product channels of the phenoxy + O( 3 P) reaction are concluded to be para/ortho-benzoquinone + H, 2,4-cyclopentadienone + HCO, and, at high temperatures, also phenyl + O 2 . The main bimolecular product channels of the phenyl + O 2 reaction include 2,4-cyclopentadienone + HCO at lower temperatures, and phenoxy + O( 3 P) at higher temperatures. Both for the phenoxy + O( 3 P) and phenyl + O 2 reactions, the collisional stabilization of peroxybenzene at low temperatures and high pressures competes with the bimolecular product channels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optimization of Solid Oxide Electrolysis Cell Systems Accounting for Long-Term Performance and Health Degradation

This study focuses on optimizing solid oxide electrolysis cell (SOEC) systems for efficient and durable long-term hydrogen (H2) production. While the elevated operating temperatures of SOECs offer advantages in terms of efficiency, they also lead to chemical degradation, which shortens cell lifespan. To address this challenge, dynamic degradation models are coupled with a steady-state, two-dimensional, non-isothermal SOEC model and steady-state auxiliary balance of plant equipment models, within the IDAES modeling and optimization framework. A quasi-steady state approach is presented to reduce model size and computational complexity. Long-term dynamic simulations at constant H2 production rate illustrate the thermal effects of chemical degradation. Dynamic optimization is used to minimize the lifetime cost of H2 production, accounting for SOEC replacement, operating, and energy expenses. Several optimized operating profiles are compared by calculating the Levelized Cost of Hydrogen (LCOH).

Giridhar, Nishant↗
DOE OSTI2024

Optimization of Solid Oxide Electrolysis Cell Systems Accounting for Long-Term Performance and Health Degradation

This study focuses on optimizing solid oxide electrolysis cell (SOEC) systems for efficient and durable long-term hydrogen (H2) production. While the elevated operating temperatures of SOECs offer advantages in terms of efficiency, they also lead to chemical degradation, which shortens cell lifespan. To address this challenge, dynamic degradation models are coupled with a steady-state, two-dimensional, non-isothermal SOEC model and steady-state auxiliary balance of plant equipment models, within the IDAES modeling and optimization framework. A quasi-steady state approach is presented to reduce model size and computational complexity. Long-term dynamic simulations at constant H2 production rate illustrate the thermal effects of chemical degradation. Dynamic optimization is used to minimize the lifetime cost of H2 production, accounting for SOEC replacement, operating, and energy expenses. Several optimized operating profiles are compared by calculating the Levelized Cost of Hydrogen (LCOH).

Giridhar, Nishant↗
NASA NTRS1978

An ion cyclotron resonance study of reactions of some atomic and simple polyatomic ions with water

Reactions of various positive ions with water vapor were studied by ion cyclotron resonance mass spectrometric techniques. Rate constants and product distributions were determined for reactions of the ions: Ar(+), Co(+), N2(+), and CO2(+), CH2(+), and CH4(+), CH2Cl(+), HCO(+), H2CO(+), H2COH(+), H2S(+) and HS(+). The results obtained in this work are compared with earlier reported data where available.

Karpas, Z.↗
NASA NTRS1987

Kinetics of the BrO + ClO reaction and implications for stratospheric ozone

The first direct measurements of the rate constant and product distribution of the BrO + ClO reaction as a function of temperature is reported. It is shown that this reaction could account for a large fraction of the springtime ozone depletion over Antarctica and provide a source of chlorine dioxide of sufficient magnitude to explain the recent measurements of this species in the Antarctic atmosphere, provided that the stratosphere contains a sufficient quantity of bromine.

Hills, Alan J.↗