A technique for correcting coefficient quantization errors in hybrid control systems.
Taylor series expansion used in correcting quantized digital coefficient errors in hybrid feedback control system
Chenoweth, D. L.↗
SEARCH · Search NASA
Results for “Corrected coefficients”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
On the correction of coefficient quantization errors in hybrid control systems.
Correction coefficients for time response of hybrid control systems with digital feedback elements containing quantized coefficients
Chenoweth, D. L.↗
Nonlinear sensitivity coefficients and corrections in system identification
The evaluation of sensitivity coefficients which are the changes in the eigencharacteristics with respect to changes in the structural parameters is important in the identification of structural systems. In such studies the commonly used linearized sensitivity coefficients for system identification have occasionally resulted in poor convergence or even divergence during the iteration process to update analytical models for better correlation with the test data. Nonlinear sensitivity coefficients and nonlinear correction terms, usually eliminated during the linearization process, have been developed to evaluate sensitivity coefficients of linear systems. Application to computer simulated example problems indicates a more rapid and stable convergence of the iteration processes to update the analytical model for the improvement of the correlation with test data. The successful application of combining the nonlinear sensitivity coefficients and nonlinear correction terms with the Multiple Boundary Condition Tests enhances the ability to validate large space structures by ground tests.
Kuo, C. P.↗
Limb Correction of Polar-Orbiting Imagery for the Improved Interpretation of RGB Composites
Red-Green-Blue (RGB) composite imagery combines information from several spectral channels into one image to aid in the operational analysis of atmospheric processes. However, infrared channels are adversely affected by the limb effect, the result of an increase in optical path length of the absorbing atmosphere between the satellite and the earth as viewing zenith angle increases. This paper reviews a newly developed technique to quickly correct for limb effects in both clear and cloudy regions using latitudinally and seasonally varying limb correction coefficients for real-time applications. These limb correction coefficients account for the increase in optical path length in order to produce limb-corrected RGB composites. The improved utility of a limb-corrected Air Mass RGB composite from the application of this approach is demonstrated using Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) imagery. However, the limb correction can be applied to any polar-orbiting sensor infrared channels, provided the proper limb correction coefficients are calculated. Corrected RGB composites provide multiple advantages over uncorrected RGB composites, including increased confidence in the interpretation of RGB features, improved situational awareness for operational forecasters, and the ability to use RGB composites from multiple sensors jointly to increase the temporal frequency of observations.
satellite imagery↗
On the correction of coefficient quantization errors in hybrid control systems
Time response deviation correction in hybrid computer control systems with digital feedback elements containing quantized coefficients
Chenoweth, D. L.↗
An outgassing release factor for nonradiogenic volatiles on Mars
The outgassing release factor for nonradiogenic volatiles (such as water) on Mars since the end of accretion is calculated using the current value of the Ar-40 release factor and a correction coefficient derived from the history of volcanism on Mars. The Ar-40 release factor is calculated from the bulk K content of the planet and its current atmospheric inventory of Ar-40. The correction coefficient compensates for the variable abundance of Ar-40 in the Martian mantle through time versus the relatively constant nonradiogenic volatile abundance, and for the variable rate at which outgassing has occurred on Mars. The results yield a nonradiogenic release coefficient between 1.4 and 2.8. The outgassing release factor for nonradiogenic volatiles is calculated to be between 0.017 and 0.112.
Scambos, Ted A.↗
Blockage correction in three-dimensional wind tunnel testing based on the wall signature method
An improved wall interference assessment and correction method for three-dimensional wind tunnel testing is presented. Blockage corrections on the surface of a test article are calculated based on a limited number of wall pressure measurements. These measurements are combined with a signature analysis procedure and influence functions to determine an equivalent test article and wake representation. Pressure coefficient corrections are calculated based on this equivalent body. The signature analysis procedure is modified to improve the on-line operation of the wall signature method. A new geometry of the equivalent body is introduced which can be combined with existing panel codes more effectively. The calculation of influence functions and the determination of pressure coefficient corrections are based on a panel code. Therefore it is possible to apply the present method to any closed tunnel cross section. A numerical simulation of the idealized flow field of a wing and its wake in a rectangular wind tunnel is used to verify the improved wall signature method. The present method is considered to calculate blockage corrections in the NASA/ARC 12ft Pressure Wind Tunnel.
Ulbrich, N.↗
Correction factors for on-line microprobe analysis of multielement alloy systems
An on-line correction technique was developed for the conversion of electron probe X-ray intensities into concentrations of emitting elements. This technique consisted of off-line calculation and representation of binary interaction data which were read into an on-line minicomputer to calculate variable correction coefficients. These coefficients were used to correct the X-ray data without significantly increasing computer core requirements. The binary interaction data were obtained by running Colby's MAGIC 4 program in the reverse mode. The data for each binary interaction were represented by polynomial coefficients obtained by least-squares fitting a third-order polynomial. Polynomial coefficients were generated for most of the common binary interactions at different accelerating potentials and are included. Results are presented for the analyses of several alloy standards to demonstrate the applicability of this correction procedure.
Unnam, J.↗
Nonlinear sensitivity coefficients and corrections in system identification
Explore the source record for details and available documents.
Kuo, C. P.↗
Inverse Solution to the Electronic Crosstalk Correction of Bands 27-30 in Terra MODIS
In the Terra MODIS Collection 6.1 (C6.1) Level-1B (L1B) product, an electronic crosstalk correction is implemented for bands 27 30 using a linear algorithm. In this algorithm, the measured (contaminated) signal from the detectors in the bands was used as a reference signal for deriving the correction coefficients from lunar images and for applying the correction to the calibration and L1B data. As the mission progressed, the level of contamination steadily increased in each detector, with an additional large increase associated with the Terra MODIS safe-mode anomaly in February of 2016. In this work, we developed a modified algorithm for deriving the crosstalk coefficients and applying the correction which uses the inverse crosstalk coefficient matrix in order to remove the contamination from the reference signal. We apply the coefficients using this modified algorithm to calibration and Earth-view data in order to assess the difference with the data in C6.1. We also perform calculations using simulated contamination to show the difference in the recovery of the corrected signal between the C6.1 algorithm and the modified algorithm. We will show, that although the current levels of contamination are much higher than early in the mission, the overall impact of having contamination on the reference signal for the correction is small. However, this impact is non-linear as a function of the magnitude of the contamination level, so it should be monitored as the mission continues.
Truman Wilson↗
Limb Correction of RGB Composite Imagery for Improved Interpretation
RGB (Red‐Green‐Blue) imagery, created by integrating several spectral channels into one composite image, is currently used by the operational weather community to aid in quick, real‐time analysis of atmospheric processes. However, the limb effect - a result of an increasing optical path length of the absorbing atmosphere between the satellite and the earth as scan angle increases - interferes with the qualitative interpretation of RGB composites at large scan angles. It also makes the comparison of similar products from multiple satellite sensors difficult. Recent work has indicated that correcting for the limb effect in the basic channel imagery using simple statistical relationships greatly improves the utility of the derived RGB imagery. However, it is hypothesized that the limb correction coefficients vary with respect to latitude, season, cloud cover, and surface albedo. This poster will highlight an improved approach to the limb correction of RGB imagery using varying coefficients. The Joint Center for Satellite and Data Assimilation (JCSDA) Community Radiative Transfer Model (CRTM) was used to simulate top of atmosphere brightness temperatures at varying scan angles for infrared channels corresponding to the Aqua and Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Suomi NPP Visible Infrared Imaging Radiometer Suite (VIIRS), and Meteosat‐10 Spinning Enhanced Visible and Infrared Imager (SEVIRI) sensors. A subset of European Center for Medium‐Range Weather Forecasts (ECMWF) temperature, specific humidity, and ozone mixing ratio profiles from March 2013 through February 2014 were used as input to the CRTM. The simulated brightness temperatures were used to determine the best fit slope of the linear relationship between the natural log of the cosine of the scan angle and the difference of the simulated brightness temperature at nadir and on the limb. The correction coefficients were then analyzed for variability with respect to latitude, season, cloud cover, and surface type and used to produce improved limb corrected imagery. Applications of the results will be presented.
Elmer, Nicholas↗
Visible spectral reflectance measurements /0.33-1.1 microns/ of the Galilean satellites at many orbital phase angles
One hundred eighty-seven reflectance spectra (0.33-1.10 microns) of the Galilean satellites have been obtained. Solar phase angle color correction coefficients were derived and the spectra corrected to a solar phase of 6 deg. Solar phase angle coefficients beyond 0.55 micron are presented for the first time. The spectra as a function of orbital phase angle are presented in the form of images to display hemispheric spectral variations. Io and Europa are redder on their trailing hemispheres while Callisto is redder on its leading hemisphere. Ganymede shows small longitudinal color variations despite the complex albedo structure visible in Voyager images. Comparisons of these data with previous measurements reveal that most differences can be attributed to the solar calibration. Reflectance measurements of Io at 0.73 micron observed 8.5 years apart show a 6% global reflectance decrease. However, it is difficult to unambiguously attribute this particular decrease in reflectance to a change in Io's surface composition.
Mcfadden, L. A.↗
The correction of Landsat data for the effects of haze, sun angle, and background reflectance
A technique has been developed for simulating the effects of haze, sun angle, and background reflectance in Landsat data and correcting for them. The atmospheric model assumes a two-layer atmosphere: a Rayleigh scattering molecular layer and a Mie scattering haze layer next to the earth's surface. Reflection and transmission matrices describe the reflection and transmission properties of the plane parallel scattering layers. The multispectral scanner response is computed for various values of the parameters under evaluation. This yields expressions for Landsat gray-scale levels used for determining the effect of changes in any parameter. The Atmospheric Correction computer program is used to determine the haze level from the data, to compute the reflectance, and to interpolate in order to find the correction coefficients necessary to make the desired correction.
Potter, J. F.↗
LACIE registration processing
The basic requirements for the LACIE processing system are to extract specified test sites (sample segments) from LANDSAT MSS data, and to apply geometric corrections and perform correlations to ensure registration between successive data acquisitions to within 1 pixel (root mean square). The general flow within the LACIE processing system is described with emphasis on (1) determination of line and pixel location of a search area within an MSS frame; (2) determination of the geometric correction coefficient and the application of geometric corrections; (3) edge detection; and (4) correlation by coincidence of edges.
Grebowsky, G. J.↗
The Real-Time Wall Interference Correction System of the NASA Ames 12-Foot Pressure Wind Tunnel
An improved version of the Wall Signature Method was developed to compute wall interference effects in three-dimensional subsonic wind tunnel testing of aircraft models in real-time. The method may be applied to a full-span or a semispan model. A simplified singularity representation of the aircraft model is used. Fuselage, support system, propulsion simulator, and separation wake volume blockage effects are represented by point sources and sinks. Lifting effects are represented by semi-infinite line doublets. The singularity representation of the test article is combined with the measurement of wind tunnel test reference conditions, wall pressure, lift force, thrust force, pitching moment, rolling moment, and pre-computed solutions of the subsonic potential equation to determine first order wall interference corrections. Second order wall interference corrections for pitching and rolling moment coefficient are also determined. A new procedure is presented that estimates a rolling moment coefficient correction for wings with non-symmetric lift distribution. Experimental data obtained during the calibration of the Ames Bipod model support system and during tests of two semispan models mounted on an image plane in the NASA Ames 12 ft. Pressure Wind Tunnel are used to demonstrate the application of the wall interference correction method.
Ulbrich, Norbert↗
Electronic Crosstalk Impact Assessment in the Terra MODIS Mid-Wave Infrared Bands
The Moderate Resolution Imaging Spectroradiometer (MODIS) on board the Terra spacecraft is one of thekey instruments in NASA's Earth Observing System. Since 2000, MODIS has collected continuous data in 36spectral bands ranging in wavelength between 0.4 µm and 14.2 µm. Since before launch, signal contamination inthe form of electronic crosstalk has been observed in many of the MODIS thermal emissive bands, particularlyfor bands 27 30, a correction for which has been applied to the current Collection 6 algorithm. The mid-waveinfrared bands in Terra MODIS, 20 25, also show signs of electronic crosstalk contamination, which can beseen clearly during observations of the Moon. In this paper, we'll present an impact assessment of electroniccrosstalk on the mid-wave infrared bands in Terra MODIS. We will also derive correction coefficients from thelunar observations, which can be applied to correct the calibrated radiance in the MODIS Level-1B product. Wewill provide an analysis of these results and potential improvements to the MODIS Level-1B product.
calibration↗
Electronically scanned multichannel pressure transducer system for cryogenic environments
Research into the application of custom doped piezoresistive silicon pressure sensors has led to a multichannel pressure sensor design that will operate accurately and reliably at cryogenic temperatures. The thermal effects upon multichannel pressure sensors are mapped by thermal calibrations and are represented by sets of nth order coefficients specific to each sensor. The thermal offset and sensitivity variations are corrected by computer algorithms which scan the sensors, recall correction coefficients from thermally induced sensor variations, and apply these to correct the sensor's output measurement uncertainty to within 0.5 percent of full scale output for combined offset and sensitivity. A prototype sensor system has been fabricated, and performance test data are presented.
Chapman, John J.↗
Analysis of the Electronic Crosstalk Effect in Terra MODIS Long-Wave Infrared Photovoltaic Bands Using Lunar Images
The Moderate Resolution Imaging Spectroradiometer (MODIS) is one of the key sensors among the suite of remote sensing instruments on board the Earth Observing System Terra and Aqua spacecrafts. For each MODIS spectral band, the sensor degradation has been measured using a set of on-board calibrators. MODIS also uses lunar observations from nearly monthly spacecraft maneuvers, which bring the Moon into view through the space-view port, helping to characterize the scan mirror degradation at a different angles of incidence. Throughout the Terra mission, contamination of the long-wave infrared photovoltaic band (LWIR PV, bands 27-30) signals has been observed in the form of electronic crosstalk, where signal from each of the detectors among the LWIR PV bands can leak to the other detectors, producing a false signal contribution. This contamination has had a noticeable effect on the MODIS science products since 2010 for band 27, and since 2012 for bands 28 and 29. Images of the Moon have been used effectively for determining the contaminating bands, and have also been used to derive correction coefficients for the crosstalk contamination. In this paper, we introduce an updated technique for characterizing the crosstalk contamination among the LWIR PV bands using data from lunar calibration events. This approach takes into account both the in-band and out-of-band contribution to the signal contamination for each detector in bands 27-30, which is not considered in previous works. The crosstalk coefficients can be derived for each lunar calibration event, providing the time dependence of the crosstalk contamination. Application of these coefficients to Earth-view image data results in a significant reduction in image contamination and a correction of the scene radiance for bands 27- 30. Also, this correction shows a significant improvement to certain threshold tests in the MODIS Level-2 Cloud Mask. In this paper, we will detail the methodology used to identify and correct the crosstalk contamination for the LWIR PV bands in Terra MODIS. The derived time-dependent crosstalk coefficients will also be discussed. Finally, the impact of the correction on the downstream data products will be analyzed.
Wilson, Truman↗