Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coupled Model Intercomparison Project Phase 6 (CMIP6)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coupled model intercomparison project phase 6 (CMIP6) high resolution model intercomparison project (HighResMIP) bias in extreme rainfall drives underestimation of amazonian precipitation

Abstract Extreme rainfall events drive the amount and spatial distribution of rainfall in the Amazon and are a key driver of forest dynamics across the basin. This study investigates how the 3-hourly predictions in the High Resolution Model Intercomparison Project (HighResMIP, a component of the recent Coupled Model Intercomparison Project, CMIP6) represent extreme rainfall events at annual, seasonal, and sub-daily time scales. TRMM 3B42 (Tropical Rainfall Measuring Mission) 3 h data were used as observations. Our results showed that eleven out of seventeen HighResMIP models showed the observed association between rainfall and number of extreme events at the annual and seasonal scales. Two models captured the spatial pattern of number of extreme events at the seasonal and annual scales better (higher correlation) than the other models. None of the models captured the sub-daily timing of extreme rainfall, though some reproduced daily totals. Our results suggest that higher model resolution is a crucial factor for capturing extreme rainfall events in the Amazon, but it might not be the sole factor. Improving the representation of Amazon extreme rainfall events in HighResMIP models can help reduce model rainfall biases and uncertainties and enable more reliable assessments of the water cycle and forest dynamics in the Amazon.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

CONUS-wide Projected Flood Frequency and Uncertainty Estimates, Version 1.0

This dataset presents a large-ensemble of CONUS-wide projected flood frequency and uncertainty estimates across ~2.7 million NHDPlusV2 river reaches over the CONUS. The framework producing this dataset leverages a multi-model, uncertainty-aware modeling framework that allows evaluating shifts in flood frequences at the stream reach level across the CONUS. CONUS-wide ensemble streamflow projections generated from hydrologic simulations driven by downscaled and bias-corrected Coupled Model Intercomparison Project Phase 6 (CMIP6) outputs are used to derive these flood frequency and uncertainty estimates over the period 1980 - 2099. A spatially consistent regional L-moment algorithm is applied across clusters defined by the US Hydrologic Unit Code Subregions (HUC4s and HUC8s) and NHDPlusV2 stream orders to estimate flood frequencies. The dataset also includes at-site based flood estimates that allow for the comparison between local and regional approach-based estimates, assess projected changes, and characterize their uncertainties. For more reliable estimation of rare flood frequencies such as 500 and 1000-year return periods, super-ensemble based estimates are also included in the dataset. This dataset is derived to support the "Impact-Informed Dam Safety Risk Assessment for Securing Hydropower Assests" project for the US Department of Energy (DOE) Hydropower and Hydrokinetic Office (H2O). For further details, refer to Kao et al. (2022), Ghimire et al. (2023), Ghimire et al. (2025), and Hosking and Wallis (1997).

Ghimire, Ganesh [ORNL] (ORCID:0000000242843941)↗
DOE OSTI2025

CMIP6-based Multi-model Hydropower Projection over the Conterminous US, Version 1.1

This dataset presents a suite of hydropower projections for the conterminous United States (CONUS), derived from multiple downscaled and bias-corrected Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6). The CMIP6 GCMs are downscaled using either statistical (DBCCA) or dynamical (RegCM) approaches, based on two meteorological reference datasets (Daymet and Livneh). The resulting downscaled precipitation, temperature, and wind speed data are then used to drive two calibrated hydrologic models (VIC and PRMS), enabling simulations of projected future hydrologic responses across the CONUS. Simulated total runoff is subsequently employed to drive two hydropower models (WMP, now implemented as mosartwmpy-power, and WRES) to evaluate how climate change may affect future hydropower production for both federal and non-federal hydropower fleets. This dataset was developed to support the SECURE Water Act Section 9505 Assessment for the U.S. Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details, see Broman et al. (2024), Thurber et al. (2024), Kao et al. (2022), and Zhou et al. (2023).

Voisin, Nathalie [Pacific Northwest National Labor↗
DOE OSTI2025

Data and code for Daily and Multi-Day Extreme Rainfall Analysis Under Future Climates Using Stochastic Storm Transposition and NEX-GDDP-CMIP6 Over CONUS

This data package provides inputs, codes, and outputs for a comprehensive analysis of projected changes in extreme precipitation across 10 regions of the continental United States, using 34 downscaled Earth System Models (ESMs) from the NASA Earth Exchange Global Daily Downscaled Projections, Coupled Model Intercomparison Project Phase 6 (NEX-GDDP-CMIP6) dataset. These models are part of the Coupled Model Intercomparison Project Phase 6 (CMIP6), a coordinated climate modeling framework widely used to assess climate change impacts. The analysis applies a stochastic storm transposition method to quantify changes in extreme rainfall under two Shared Socioeconomic Pathway (SSP) climate scenarios—SSP2-4.5 (moderate emissions) and SSP5-8.5 (high emissions)—compared to historical conditions (1995–2014 vs. 2081–2100). The dataset includes rainfall depth estimates for extreme events with return periods from 2 to 500 years across multiple storm durations (1, 3, and 5 days) for each of the 10 U.S. regions. Weighted ensemble statistics are derived from individual ESM performance against historical precipitation patterns, enabling robust uncertainty quantification through both sign-based and permutation-test-based model agreement assessments. Key analyses address: (1) relative changes in extreme precipitation for each climate scenario, (2) differences between SSP scenarios (SSP5-8.5 vs. SSP2-4.5), (3) contrasts between rare and frequent events, and (4) variations between multi-day and daily storm durations. The workflow produces ensemble statistics—median, 5th, 25th, 75th, and 95th percentiles—along with model agreement metrics that identify regions and event types with robust climate change signals. The dataset includes: processed rainfall depth outputs (netCDF format) from the RainyDay Python package, ESM weights from historical performance evaluation using DayMet observations, ensemble statistics across all storm dimensions, and figures summarizing key findings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Global Corn Heat Stress: Mean and SD of Degree Days Above 29°C based on NEX-GDDP-CMIP6 Climate Projections

Description This global dataset provides the estimated mean and standard deviation (SD) of corn heat stress (degree days above 29°C) for a set of climate models in NEX-GDDP-CMIP6 at 0.25-degree resolution. The NEX-GDDP-CMIP6 dataset is comprised of global downscaled climate scenarios derived from the General Circulation Model (GCM) runs conducted under the Coupled Model Intercomparison Project Phase 6 (CMIP6). The current dataset includes: Long-Term Average Degree Days Above 29°C- Historical Long-Term Average Degree Days Above 29°C- SSP245 Long-Term Standard Deviation of Degree Days Above 29°C- Historical Long-Term Standard Deviation of Degree Days Above 29°C- SSP245 The mean and SD are calculated over 1985-2014 for the historical period and over 2035-2064 for future projections. A full description of methods, including growing season, daily temperature distribution, and statistical coefficients, can be found in Haqiqi (2024). The source climate data are obtained from https://ds.nccs.nasa.gov/thredds2/catalog/catalog.html and are described in Thrasher et al (2022). The codes used to create this dataset are available at https://github.com/ihaqiqi/dd29c_nex_cmip6. Acknowledgments This work was supported by the US Department of Energy, Office of Science, Biological and Environmental Research Program, Earth and Environmental Systems Modeling, MultiSector Dynamics under Cooperative Agreement DE-SC0022141. The data processing, computation, and storage were completed on Purdue Anvil supercomputer and cyberinfrastructure supported by the National Science Foundation HDR award # 2118329: "NSF Institute for Geospatial Understanding through an Integrative Discovery Environment (I-GUIDE)". References Haqiqi. I. (2024). Trade can buffer climate-induced risks and volatilities in crop supply. Environmental Research: Food Systems. https://doi.org/10.1088/2976-601X/ad7d12 Thrasher, B., Wang, W., Michaelis, A., Melton, F., Lee, T., & Nemani, R. (2022). NASA global daily downscaled projections, CMIP6. Scientific Data, 9(1), 262. https://doi.org/10.1038/s41597-022-01393-4

Climate Change↗
DOE OSTI2024

Concurrent Inter-Model Spread of Boreal Winter Westerly Jet Meridional Positions Between the Northern and Southern Hemispheres in CMIP6 Models

Here, this study investigates the inter-model spread of climatological extratropical westerly jets in boreal winter, using the historical simulation of 52 Coupled Model Intercomparison Project phase 6 (CMIP6) models from 1851 to 2014. The results show that there is a substantial spread in the latitude of the upper-tropospheric westerly jet across models, characterised by large inter-model standard deviations to both the poleward and equatorward sides of the jet axis, although the multi-model ensemble mean (MME) performs well in simulating meridional position of westerly jets. Furthermore, we detect the consistency of inter-model jet position spread between the Northern and Southern Hemispheres, based on the inter-model empirical orthogonal function (EOF) decomposition and correlation of regional-averaged zonal winds. Specifically, the models that simulate the westerly jets poleward/equatorward relative to the MME position in one hemisphere also tend to simulate the jets poleward/equatorward in the other hemisphere. Accordingly, we define a global jet spread index to depict the concurrence of jet shift in the two hemispheres. The results of inter-model regression analyses based on this index indicate that the models positioning the jets poleward than the MME tend to simulate a wider Hadley Cell, a poleward-shifted Ferrel Cell in the Southern Hemisphere, enhanced precipitation in the subtropics and suppressed precipitation in the tropics, and warmer sea surface temperatures in the subtropics and mid-latitudes. The present results suggest that improving the simulation of jet positions in climate models requires a comprehensive consideration of thermal states in the tropics and subtropics/mid latitudes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

CMIP6-based Dynamically Downscaled Hydroclimate Projection over the Conterminous US

This dataset presents a suite of downscaled hydro-climate projections over the conterminous United States (CONUS) based on multiple selected Global Climate Models (GCMs) from the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled dynamically using Regional Climate Model version 4 (RegCM4). Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. This dataset is formulated to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details on this dataset, please refer to Kao et al. (2022) and Rastogi et al. (2022).

13 HYDRO ENERGY↗
DOE OSTI2025

Artificial Intelligence-Enhanced CMIP6 Climate Projections Across the Conterminous United States

This dataset comprises high-resolution climate projections at 1/24 degree grid (~4km) over the conterminous United States (CONUS) based on ten Global Climate Models (GCMs) that are part of the Coupled Models Intercomparison Project phase 6 (CMIP6). The CMIP6 GCMs are downscaled using two artificial intelligence (AI) techniques, primarily based on the computer vision approach called super-resolution. We train two separate networks: super-resolution convolutional neural network (SRCNN) and super-resolution generative adversarial network (SRGAN). The networks are trained using Daymet observations, originally available at a 1 km resolution. For training purposes, the Daymet data is interpolated to 1/24 degree (~4km), 0.25 degree and 1 degree, which serve as high, intermediate and low-resolution inputs respectively. For each of the SRCNN and SRGAN network, we use a two-step resolution enhancement, the first step generates 4x refinement from 1 degree to 0.25 degree and the second step generates 6x refinement from 0.25 degree to 1/24 degree (~4km). We downscale daily scale precipitation, maximum temperature and minimum temperature for the six CMIP6 GCMs for 1980 to 2019 in the historical period and 2020 to 2059 in the near-term future under the shared socioeconomic pathway 585 and 245 (SSP585 and SSP245) emission scenarios. We also perform double bias-correction with Daymet observations using a quantile mapping approach, first for GCMs prior to making predictions at 1 degree grid and second after making final predictions at ~4km.

13 HYDRO ENERGY↗
DOE OSTI2024

Evaluation of Global Fire Simulations in CMIP6 Earth System Models

Fire is the primary form of terrestrial ecosystem disturbance on a global scale and an important Earth system process. Most Earth system models (ESMs) have incorporated fire modeling, with 19 of them submitting model outputs of fire-related variables to the Coupled Model Intercomparison Project Phase 6 (CMIP6). This study provides the first comprehensive evaluation of CMIP6 historical fire simulations by comparing them with multiple satellite-based products and charcoal-based historical reconstructions. Our results show that most CMIP6 models simulate the present-day global burned area and fire carbon emissions within the range of satellite-based products. They also capture the major features of observed spatial patterns and seasonal cycles, the relationship of fires with precipitation and population density, and the influence of the El Niño–Southern Oscillation (ENSO) on the interannual variability of tropical fires. Regional fire carbon emissions simulated by the CMIP6 models from 1850 to 2010 generally align with the charcoal-based reconstructions, although there are regional mismatches, such as in southern South America and eastern temperate North America prior to the 1910s and in temperate North America, eastern boreal North America, Europe, and boreal Asia since the 1980s. The CMIP6 simulations have addressed three critical issues identified in CMIP5: (1) the simulated global burned area being less than half of that of the observations, (2) the failure to reproduce the high burned area fraction observed in Africa, and (3) the weak fire seasonal variability. Furthermore, the CMIP6 models exhibit improved accuracy in capturing the observed relationship between fires and both climatic and socioeconomic drivers and better align with the historical long-term trends indicated by charcoal-based reconstructions in most regions worldwide. However, the CMIP6 models still fail to reproduce the decline in global burned area and fire carbon emissions observed over the past 2 decades, mainly attributed to an underestimation of anthropogenic fire suppression, and the spring peak in fires in the Northern Hemisphere midlatitudes, mainly due to an underestimation of crop fires. In addition, the model underestimates the fire sensitivity to wet–dry conditions, indicating the need to improve fuel wet-ness estimation. Based on these findings, we present specific guidance for fire scheme development and suggest a postprocessing methodology for using CMIP6 multi-model outputs to generate reliable fire projection products.

Wildfire, Earth system models↗
DOE OSTI2024

CMIP6-based Multi-model Streamflow Projections over the Conterminous US, Version 1.1

This dataset presents an ensemble of streamflow projections covering the conterminous United States (CONUS), developed to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). Multiple Coupled Models Intercomparison Project phase 6 (CMIP6) Global Climate Models (GCMs) were downscaled using either statistical (DBCCA) or dynamical (RegCM) downscaling methods, based on two meteorological reference datasets (Daymet and Livneh). Subsequently, the downscaled precipitation, temperature, and wind speed data were used to drive two calibrated hydrologic models (VIC and PRMS), with total runoff routed through the Routing Application for Parallel computatIon of Discharge (RAPID) routing model, producing an ensemble of streamflow projections across 2.7 million NHDPlusV2 stream reaches across the CONUS. Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. Additionally, using only DBCCA and Daymet, the projections extend to the 2060-2099 far-future period and encompass three additional emission scenarios (SSP370, SSP245, and SSP126). This dataset is designed to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details, refer to Kao et al. (2022), Rastogi et al. (2022), and Ghimire et al. (2023).

13 HYDRO ENERGY↗
DOE OSTI2026

Benchmarking soil moisture and its relationship to ecohydrologic variables in Earth System Models

Soil moisture (SM) is a key regulator of ecosystem biogeophysics, influencing plant water relations and land-atmosphere energy exchanges. We evaluate the representation of SM in 16 Earth System Models from the Coupled Model Intercomparison Project Phase 6 (CMIP6) using the International Land Model Benchmarking (ILAMB) framework, focusing on surface (0–5, 0–10 cm) and rootzone (0–100 cm) depths, as well as key ecohydrological variables like gross primary productivity (GPP), leaf area index (LAI), and evapotranspiration (ET), and their coupling. Models are benchmarked against multiple observational and assimilated datasets to assess both state variables and cross-variable relationships. Surface SM is generally well represented (r > 0.87), while rootzone SM variability is systematically overestimated (normalized standard deviation > 1). ET shows strong agreement with observations (r > 0.9), whereas GPP and LAI exhibit larger inter-model spread. Skill in individual variables does not guarantee realistic SM–ecohydrology coupling, which varies strongly across models and depends on the reference dataset. Köppen-based regional analyses reveal strong regime dependence, with several models performing well in Tropical and Temperate regions but degrading in Continental (high-latitude) zones. Across both global and regional benchmarks, models cluster by land surface framework, indicating that structural choices in soil hydrology and soil–plant coupling exert a first-order control on performance. These results provide process-relevant benchmarks and suggest that improving the representation of vertical soil structure, rooting depth distributions, and soil–plant hydraulic coupling will be central to advancing soil moisture realism in next-generation Earth system models.

CMIP6↗
DOE OSTI2025

ILAMBv2.7 benchmarking results comparing E3SMv2.1 land-atmosphere coupled (BGCv2LNDATM) and stand alone land (ELM) simulations with CMIP6 emission driven historical simulations

This dataset contains land model benchmarking results for the Energy Exascale Earth System Model version 2.1 (E3SMv2.1), including outputs from both coupled biogeochemistry simulations and stand-alone land model simulations. These results are compared against several emission-driven historical simulations from the Coupled Model Intercomparison Project Phase 6 (CMIP6). Benchmarking was conducted using the International Land Model Benchmarking (ILAMB) package, version 2.7 (ILAMBv2.7). CMIP6 model outputs were sourced from the Earth System Grid Federation (ESGF), while the E3SMv2.1 results were derived from raw model outputs. These outputs underwent processing steps such as time serialization, conservative regridding, and data standardization to ensure comparability. For spatial interpolation, the Earth System Modeling Framework (ESMF) tool, ESMF_RegridWeightGen, was employed to generate regridding weights, enabling the transformation of E3SM’s native cubed-sphere grid to a regular latitude-longitude grid.

Feng, Sha [PNNL]↗
DOE OSTI2025

Evaluation of historical precipitation interannual variability in CMIP6 over the United States

Interannual precipitation variability profoundly influences society via its effects on agriculture, water resources, infrastructure, and disaster risks. In this study, we use daily in situ precipitation observations from the global historical climatology network-daily (GHCN-D) to assess the ability of 21 Coupled Model Intercomparison Project Phase 6 (CMIP6) models, including the 50-member fifth-generation Canadian Earth System Model single model initial-condition large ensemble (CanESM5_SMILE), to realistically simulate historical interannual precipitation variability trends within 17 regions of the contiguous United States (CONUS). We assess how accurately the CMIP6 simulations align with observational data across annual, summer, and winter periods, focusing on four key hydrometeorological metrics, including interannual precipitation variability, relative interannual precipitation variability (coefficient of variation), annual mean precipitation, and annual wet day frequency. Our findings reveal that CMIP6 ensemble members generally reproduce the spatial patterns of observed trends in annual mean precipitation. In most regions, models agree well with the signs of observed changes in annual mean precipitation, though discrepancies in trend magnitude are evident. Further, observed trends in winter mean precipitation broadly exhibit a spatial pattern similar to that of the observed annual mean. However, analysis of the CanESM5_SMILE shows that trends in precipitation variability may primarily be the result of model-simulated internal variability, suggesting caution in interpreting multi-model single-realization ensemble results. Challenges in accurately simulating interannual precipitation variability underscore the need for ongoing model refinement and validation to enhance climate projections, especially in regions vulnerable to extreme precipitation events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Evaluation of CMIP6 Streamflow in the Arctic

Earth system models (ESMs) serve as the primary basis for projecting future streamflow changes, but they are biased in terms of the their ability to reproduce historical observations of streamflow. Rigorous downscaling and bias-correction procedures, which are time-consuming and introduce uncertainties, are commonly used to address these biases in streamflow or runoff. However, the applicable limits of streamflow projections remain largely untested through direct comparisons with observations. In this work, we compare historical streamflow time series observations with a suite of Coupled Model Intercomparison Project phase 6 (CMIP6) ESMs to assess the space and time scales at which each ESM represents historic streamflow observations. We focus our analysis on streamflow across the Arctic given the higher degree of warming experienced over this region, underscoring its importance for understanding the future changes. A series of metrics—volume, seasonality, extreme capturing streamflow variability, drought, and flooding is tested to assess ESM simulation skill for total events and overall distributions. Our results indicate that although improvements are necessary in ESM runoff and streamflow projections, the use of temporal averaging and targeting the best-fit model for comparison to observations when a suite of ESMs is considered can provide robust streamflow projections. Moreover, this work provides a basis for contextualizing the limits of ESM applicability for studies aiming to assess streamflow in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Modeling the impact of measured and projected climate and management systems on agricultural fields: Surface runoff, soil moisture, and soil erosion

Abstract As global climate change poses a challenge to crop production, it is imperative to prioritize effective adaptation of agricultural systems based on a scientific understanding of likely impacts. In this study, we applied an integrated watershed modeling framework to examine the impacts of projected climate on runoff, soil moisture, and soil erosion under different management systems in Central Oklahoma. The proposed model uses measured climate data and three downscaled ensembles from the Coupled Model Intercomparison Project Phase 6 (CMIP6) at the water resources and erosion watershed to understand the impact of climate change and various climate conditions under three management systems: (1) continuous winter wheat (Triticum aestivum) under conventional tillage (WW‐CT; baseline system), (2) continuous winter wheat under no‐till (WW‐NT), and (3) cool and warm season forage cover crop mixes under no‐till (CC‐NT). The study indicates that the occurrence of agricultural drought is projected to increase while erosion rates will remain unchanged under the WW‐CT. In contrast, climate simulations imposed on the WW‐NT and CC‐NT systems significantly reduce runoff and sediment while preserving soil moisture levels. Especially, implementing the CC‐NT system can bolster food security and foster sustainable farming practices in Central Oklahoma in the face of a changing climate.

Environmental Sciences & Ecology↗
DOE OSTI2024

Recalibration of missing low-frequency variability and trends in the North Atlantic Oscillation

Abstract Multi-decadal trends in the wintertime North Atlantic Oscillation (NAO) are under-represented by coupled general circulation models (CGCMs), consistent with a lack of autocorrelation in their NAO index series. This study proposes and tests two simple “reddening” approaches for correcting this problem in simulated indices based on simple one parameter short-term (AR; Auto-Regressive order 1) and long-term (FD; Fractional-Difference) time series filters. Using CGCMs from the Coupled Model Intercomparison Project Phase 6 (CMIP6), the FD filter successfully improves the autocorrelation structure of the NAO, and in turn the simulation of extreme trends, while the AR filter is less successful. The 1963–1993 NAO trend is the maximum 31-year trend in the historical period. Raw CGCMs underestimate the likelihood of this trend by a factor of ten but this discrepancy is corrected after reddening. CMIP6 future projections show that long-term (2024–2094) NAO ensemble mean trends systematically increase with the magnitude of radiative forcing: -2.4 to 3.5 hPa/century for low-to-high forcing after reddening (more than double the range using raw output). The related likelihood of future maximum 31year trends comparable to 1963–1993 ranges from 3 to 7% whereas none of these CMIP6 projections simulate this without reddening. Near-term projections of the next 31 years (2024–2054) are less sensitive than long term trends to the future scenario, showing weak-to-no forced trend. However, reddening increases the ensemble range by 74% (to +/-1 standard deviation/decade), which could increase/decrease regional climate change signals in the Northern Hemisphere by magnitudes that are underestimated when using raw CGCM output.

Meteorology & Atmospheric Sciences↗
DOE OSTI2025

Climate models project increasing precipitation in the US Southwest in 2024–2100

We analyzed the measured precipitation in the southwestern US and found that, from 1900 to 2024, precipitation decreased at an average rate of − 1.2 cm per year per 100 years. The most significant precipitation decreases occurred in the three-month period from February to April. At the same time, precipitation during the southwestern monsoon season (July, August, and September) remained relatively stable. The ensemble mean of all CMIP6 (Coupled Model Intercomparison Project phase 6) climate models, along with the regression model incorporating anthropogenic aerosol (AER) and Pacific Decadal Oscillation (PDO) as predictors, projects precipitation to increase from 2024 to 2100. This projected precipitation increase relies on the anticipated decrease in emissions of anthropogenic aerosols, which is associated with the transition from fossil fuel burning to renewable and nuclear energy sources.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Second-generation downscaled earth system model data using generative machine learning

The second-generation Sup3rCC dataset provides high-resolution meteorological data generated through the downscaling of multiple earth system models (ESMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6). This downscaling is performed through application of a generative machine learning approach called Super-Resolution for Renewable Resource Data (sup3r). This dataset builds on the first-generation Sup3rCC data by applying improved bias correction methods and adding downscaled precipitation to the output variables. As with the first Sup3rCC version, the data still include temperature, wind speed and direction at multiple heights, pressure, three components of downwelling solar radiation, and relative humidity—all at 4-kilometer (km) hourly resolution over the contiguous United States. This is a 25x spatial enhancement and 24x temporal enhancement of the source 100-km daily-average ESM data. This extension of the Sup3rCC dataset includes data from six ESMs from two shared socioeconomic pathways (SSPs) totaling 400 years of data with multiple future projections of changing meteorological conditions. The scenario selection was based on a structured evaluation of historical ESM skill and comprehensive representation of possible trajectories of future climate change in temperature, humidity, precipitation, solar irradiance, and near-surface wind speeds. The inclusion of multiple future projections is intended to enable users to assess key drivers of un 36 certainty and variability. All data are double-bias corrected, resulting in a product that can be used out-of-the-box for energy system analysis with minimal historical bias. The potential applications of Sup3rCC data extend to various topics in renewable energy resource assessment, energy systems modeling, and grid resilience studies. High-resolution future meteorological projections are critical for evaluating the effects of changing meteorological conditions on renewable energy generation, energy demand, and for optimizing energy storage and grid infrastructure. The 4-km hourly resolution of the downscaled data enables understanding of spatial and temporal variability at the scales necessary for energy system operational planning. In addition, the dataset can support risk assessments by providing detailed information on possible future extreme weather events and long-term meteorological variability at scales relevant to energy infrastructure. By offering an enhanced representation of possible future meteorological conditions, the second-generation Sup3rCC dataset enables more precise modeling of energy resilience and adaptation strategies in response to changing meteorological conditions.

24 POWER TRANSMISSION AND DISTRIBUTION↗