Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cr2O3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effect of Cr2O3 on the O-18 Tracer Incorporation in SOFC Materials

To gain insight into the Cr poisoning mechanism at the cathode side of solid oxide fuel cells (SOFCs) with stainless steel interconnects, we conducted an investigation of the impact of Cr2O3 overlayers on oxygen diffusion in various SOFC electrolyte and cathode materials. High density Gd0.10Ce0.90O2 (GDC), Y0.15Zr0.85O2 (YSZ) and La0.6Sr0.4Co0.2Fe0.8O2 (LSCF) sintered pellets were covered with 3 to 30 nm Cr - overlayers that were subsequently oxidized, forming Cr2O3. Standard 18O tracer diffusion experiments at 800°C were performed and TOFSIMS profiling revealed a Cr2O3 thickness-dependent oxygen uptake process. The oxygen ion diffusion coefficients were found to be unaffected by the Cr2O3 overlayers, which is predictable since they are a bulk property. The extracted surface exchange coefficients however varied with Cr2O3 overlayer thickness. Solid state reaction measurements of Cr2O3 with the three materials of interest, and electronic structure considerations concerning the surface exchange, led to the conclusion that the observed oxygen uptake hindrance for LSCF and the slight increase of the surface exchange coefficient for YSZ can be attributed to the electronic properties of Cr2O3. The rate limitation of the oxygen incorporation into the materials is therefore strongly dependent on the surface electronic properties. A critical thickness of Cr2O3 was determined where the transition from decreased cathode-performance to a Cr2O3-property-governed regime occurs.

30 DIRECT ENERGY CONVERSION↗

Reactions of Ethylidene on a Model Chromia Surface: 1 1-Dichloroethane on Stoichiometric alpha-Cr2O3 (1012)

The reaction of CH{sub 3}CHCl{sub 2} over the nearly-stoichiometric {alpha}-Cr{sub 2}O{sub 3} (10{sub {bar 1}} > 2) surface produces an ethylidene intermediate that yields primarily gas phase CH{sub 2}{double_bond}CH{sub 2} and surface chlorine adatoms; however, trace amounts of HC{triple_bond}CH, CH{sub 3}CH{sub 3}, H{sub 2} and CH{sub 3}CH{double_bond}CHCH{sub 3} are also observed. A rate-limiting intramolecular isomerization (2,1-hydrogen shift) in the surface ethylidene species produces gas phase CH{sub 2}{double_bond}CH{sub 2}. The chlorine freed from the dissociation of CH{sub 3}CHCl{sub 2} binds at the five-coordinate surface Cr{sup 3+} sites on the stoichiometric surface, completing the octahedral coordination sphere, and inhibits the surface chemistry by simple site blocking. No surface carbon deposition is observed from the thermal reaction of 1,1-dichloroethane under the conditions of this study, demonstrating that the ethylidene intermediate is not a primary coke forming intermediate over (10{sub {bar 1}} > 2) facets of {alpha}-Cr{sub 2}O{sub 3} under the conditions of this study.

01 COAL, LIGNITE, AND PEAT↗

Mesoporous carbon -Cr2O3 composite as an anode material for lithium ion batteries

Mesoporous carbon-Cr2O3 (M-C-Cr2O3) composite was prepared by co-assembly of in-situ formed phenolic resin, chromium precursor, and Pluronic block copolymer under acidic conditions, followed by carbonization at 750oC under Argon. The TEM results confirmed that the Cr2O3 nanoparticles, ranging from 10 to 20 nm, were well dispersed in the matrix of mesoporous carbon. The composite exhibited an initial reversible capacity of 710 mAh g-1 and good cycling stability, which is mainly due to the synergic effects of carbons within the composites, i.e. confining the crystal growth of Cr2O3 during the high temperature treatment step and buffering the volume change of Cr2O3 during the cycling step. This composite material is a promising anode material for lithium ion batteries.

36 MATERIALS SCIENCE↗

Photochemistry of Methyl Bromide on the α-Cr2O3(0001) Surface

The photochemical properties of the Cr-terminated α-Cr2O3(0001) surface were explored using methyl bromide (CH3Br) as a probe molecule. CH3Br adsorbed and desorbed molecularly from the Cr-terminated α-Cr2O3(0001) surface without detectable thermal decomposition. Temperature programmed desorption (TPD) revealed a CH3Br desorption state at 240 K for coverages up to 0.5 ML, followed by more weakly bound molecules desorbing at 175 K for coverages up to 1 ML. Multilayer exposures led to desorption at ~130 K. The CH3Br sticking coefficient was unity at 105 K for coverages up to monolayer saturation, but decreased as the multilayer formed. In contrast, pre-oxidation of the surface (using an oxygen plasma source) led to capping of surface Cr3+ sites and near complete removal of CH3Br TPD states above 150 K. The photochemistry of chemisorbed CH3Br was explored on the Cr-terminated surface using post-irradiation TPD and photon stimulated desorption (PSD). Irradiation of adsorbed CH3Br with broad band light from a Hg arc lamp resulted in both photodesorption and photodecomposition of the parent molecule at a combined cross section of ~10-22 cm2. Parent PSD was indicative of molecular photodesorption, but CH3 was also detected in PSD and Br atoms were left on the surface, both reflective of photo-induced CH3-Br bond dissociation. Use of a 385 nm cut-off filter effectively shut down the photodissociation pathway but not the parent molecule photodesorption process. From these observations it is inferred that d-to-d transitions in α-Cr2O3, occurring at photon energies <3 eV, are not responsible for photodecomposition of 2 adsorbed CH3Br. It is unclear to what extent band-to-band versus direct CH3Br photolysis play in CH3-Br bond dissociation initiated by more energetic photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Visible Light Induced Photodesorption of NO from the α-Cr2O3(0001) Surface

Nitric oxide chemistry and photochemistry on the Cr-terminated surface of α-Cr2O3(0001) was examined using temperature programmed desorption (TPD), sticking coefficient measurements and photodesorption. NO adsorbed at 100 K binds at surface Cr cation sites forming a strongly bound surface species that thermally desorbs at 320-340 K, depending on coverage. No thermal decomposition was detected in TPD in agreement with previous results in the literature. Sticking probability measurements of NO at 100 K indicated near unity sticking for NO coverages up to ~1.3 ML, with additional adsorption with higher exposures at decreased sticking probability. These results suggest that each surface Cr cation site on the α-Cr2O3(0001) surface was capable of binding more than one NO molecule, although it is unclear whether this was as separate NO molecules or as dimers. Photodesorption of adsorbed NO was examined for surface coverages below the 1 ML point. Both visible and UV light were shown to photodesorb NO without detectable NO photodecomposition. Visible light photodesorption of NO occurred with a cross section of ~2x10-19 cm2, which was estimated to greater than that obtained with UV light. The visible light photodesorption event was not associated with bandgap excitation in α-Cr2O3(0001), but instead was linked to excitation of a surface Cr3+-NO- charge transfer complex. These results illustrate that localized photoabsorption events at surface sites with unique optical properties (relative to the bulk) can result in unexpected surface photochemistry. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface structure of α-Cr2O3(0001) after activated oxygen exposure

The surface structure of a-Cr2O3(0001) before and after exposure to activated oxygen from an ECR plasma source was investigated by x-ray photoelectron spectroscopy (XPS) and x-ray photoelectron diffraction (XPD). Epitaxial Cr2O3(0001) thin films were deposited on Al2O3(0001) substrates by oxygen-plasma-assisted molecular beam epitaxy (OPA-MBE). When cooled or annealed in vacuum, strong evidence for a Cr-Cr-O3- termination was obtained by comparing the Cr3+ XPD azimuthal scan to single scattering simulations. However, after plasma exposure, a high binding energy feature was observed in the Cr 2p XPS spectrum that possesses an ordered structure distinct from the underlying Cr3+ of Cr2O3, which remains Cr-Cr-O3-like. Investigation of this new surface structure with simulations of various candidate structures tentatively rules out CrO2-like configurations. The high binding energy feature likely arises from a higher oxidation state of Cr. One possibility is the oxidation of the surface layer of Cr to Cr6- with a double chromyl structure (O=Cr=O).

Environmental Molecular Sciences Laboratory↗

Enhanced oxidative vaporization of Cr2O3 and chromium by oxygen atoms

Rates of oxidative vaporization of Cr2O3 have been found to be markedly enhanced in the presence of oxygen atoms. Investigations were conducted over the temperature range 200-1250 C. For Cr2O3 the enhancement was about 10 to the 9th power at 550 C in oxygen containing 2.5% atoms. Rapid oxidative vaporization of bare chromium was observed below 800 C, the rate being about one-half that of Cr2O3. Results are interpreted in terms of thermochemical analysis.

Fryburg, G. C.↗

Reactions of Ethyl Groups on a Model Chromia Surface: Ethyl Chloride on Stoichiometric Alpha-Cr2O3(1012)

The reaction of CH3CH2Cl over the nearly-stoichiometric ?-Cr2O3 (1 0 View the MathML source 2) surface yields gas phase CH2double bond; length as m-dashCH2, CH3CH3, H2 and surface chlorine adatoms. The decomposition reaction is initiated via C-Cl bond cleavage to give a surface ethyl (CH3CH2-) intermediate. A rate-limiting ?-hydride elimination from the surface ethyl species produces gas phase CH2double bond; length as m-dashCH2 and surface hydrogen atoms. Two parallel competing reactions form CH3CH3, via ?-hydride addition to remaining surface ethyl species (reductive elimination), and H2, via the combination of two surface hydrogen atoms. The chlorine freed from the dissociation of CH3CH2Cl binds at the five-coordinate surface Cr3+ sites on the stoichiometric surface and inhibits the surface chemistry via simple site blocking. No surface carbon deposition is observed from the thermal reaction of ethyl chloride, suggesting that ethyl intermediates are not primary coke forming intermediates in the dehydrogenation of ethane over (1 0 View the MathML source 2) facets of ?-Cr2O3.

01 COAL, LIGNITE, AND PEAT↗

Temperature Dependence of Self-diffusion in Cr2O3 from First Principles

Understanding and predicting the dominant diffusion processes in Cr2O3 is essen- tial to its optimization for anti-corrosion coatings, spintronics, and other applications. Despite significant theoretical effort in modeling defect mediated diffusion in Cr2O3 the correlation with experimentally measured diffusivities remains poor partly due to the insufficient accuracy of the theoretical approaches. Here an attempt to resolve these discrepancies is made through high accuracy density functional theory simulations cou- pled with grand canonical formalism of defect thermochemistry. In this approach, point defect formation energies were computed using hybrid exchange correlation functional. This level of theory proved to be essential for achieving the agreement with experi- mental self-diffusion coefficients. The analysis of the resulting self-diffusion coefficients indicate that chromium has higher mobility at low temperatures and high oxygen partial pressures, in particular at standard temperature and pressure conditions. At high vacuum, high temperature conditions, oxygen diffusion becomes dominant. At Cr/Cr2O3 interfaces O vacancies were found to be more mobile than Cr vacancies at all temperatures. Cr diffuses preferentially along the c-axis at low temperatures but switches to basal plane at higher temperatures. O diffusion is primarily bound to basal plane at all temperatures.

Medasani, Bharat K.↗

The effect of Al2O3, CaO, Cr2O3 and MgO on devitrification of silica

The effect of doping on devitrification of vitreous silica was studied at 1100, 1200, and 1300 C. Dispersion of dopants on a molecular scale was accomplished via a sol-gel technique. All dopants accelerated the devitrification of silica but to different degrees. The most active was CaO followed by MgO, Al2O3, and Cr2O3. Pure silica and silica containing Cr2O3 and Al2O3 devitrified to alpha-cristobalite only, whereas silica doped with CaO and MgO produced alpha-quartz and alpha-cristobalite. It appears that prolonged heat treatment would cause alpha-quartz to transform to alpha-cristobalite.

Zaplatynsky, Isidor↗

BISON capability and validation for U3Si2, Cr2O3-doped UO2, FeCrAl, and Cr-coated Zircaloy ATF concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the BISON fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on, the focus was on U3Si2 fuel and FeCrAl cladding as part of a high-impact problem through the Nuclear Energy and Advanced Model- ing Simulation program [1]. Then, developments for Cr2O3- doped UO2 fuel, as well as SiC-SiC and Cr-coated Zircaloy cladding began based upon industry interests. Near the end of fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors took over further Accident Tolerant Fuel (ATF) work in BISON in support of Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC clarified their list of priority fuel and cladding concepts, which included Cr2O3-doped UO2 and U3Si2 fuels, as well as Cr-coated Zircaloy and FeCrAl claddings. Further, reports similar in form to NUREG/CR-7024 [2] that was developed for traditional light water reactor (LWR) materials, UO2 fuel with Zircaloy claddings were created for the priority fuel and cladding concepts. In this paper select details from the reports entitled "ATF material model development and validation for priority fuel concepts" [3] and "ATF material model development and validation for priority cladding concepts" [4] are presented. First, a brief overview of the available models and their associated uncertainty are provided for the priority fuel and cladding concepts. Then, for the concepts with experimental data, comparisons between simulation and experiment are shown taking into account forward uncertainty quantification (UQ) techniques. For the concepts without publicly available experimental data, parametric studies incorporating forward UQ are completed to verify claims made about the materials’ behavior.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Materials Data on Cr2O3 by Materials Project

Cr2O3 is Corundum structured and crystallizes in the trigonal R-3c space group. The structure is three-dimensional. Cr3+ is bonded to six equivalent O2- atoms to form a mixture of edge, corner, and face-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 47–61°. There are three shorter (2.01 Å) and three longer (2.06 Å) Cr–O bond lengths. O2- is bonded to four equivalent Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids.

36 MATERIALS SCIENCE↗

Materials Data on Cr2O3 by Materials Project

Cr2O3 is Corundum-like structured and crystallizes in the triclinic P1 space group. The structure is three-dimensional. there are sixteen inequivalent Cr3+ sites. In the first Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 52–53°. There are five shorter (2.03 Å) and one longer (2.04 Å) Cr–O bond lengths. In the second Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 52–54°. There are three shorter (2.03 Å) and three longer (2.04 Å) Cr–O bond lengths. In the third Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing CrO6 octahedra. The corner-sharing octahedral tilt angles are 53°. There are four shorter (2.03 Å) and two longer (2.04 Å) Cr–O bond lengths. In the fourth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of edge and corner-sharing CrO6 octahedra. The corner-sharing octahedral tilt angles are 53°. All Cr–O bond lengths are 2.03 Å. In the fifth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.07 Å. In the sixth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 52–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the seventh Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the eighth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the ninth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the tenth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the eleventh Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the twelfth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the thirteenth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 52–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.07 Å. In the fourteenth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.06 Å. In the fifteenth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.99–2.07 Å. In the sixteenth Cr3+ site, Cr3+ is bonded to six O2- atoms to form a mixture of distorted edge and corner-sharing CrO6 octahedra. The corner-sharing octahedra tilt angles range from 53–54°. There are a spread of Cr–O bond distances ranging from 1.98–2.06 Å. There are twenty-four inequivalent O2- sites. In the first O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the second O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the third O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the fourth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the fifth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the sixth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the seventh O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the eighth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the ninth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the tenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the eleventh O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of edge and corner-sharing OCr4 trigonal pyramids. In the twelfth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the thirteenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the fourteenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the fifteenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the sixteenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the seventeenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the eighteenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the nineteenth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the twentieth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the twenty-first O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the twenty-second O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the twenty-third O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids. In the twenty-fourth O2- site, O2- is bonded to four Cr3+ atoms to form a mixture of distorted edge and corner-sharing OCr4 trigonal pyramids.

36 MATERIALS SCIENCE↗

An Evaluation of the Use of X-ray Residual Stress Determination as a Means of Characterizing Oxidation Damage of Nickel-Based, Cr2O3-Forming Superalloys Subjected to Various Oxidizing Condition

The use of X-ray residual stress determination as a technique for evaluating the damage incurred by nickel-based, Cr2O3-forming superalloy materials under various service conditions (isothermal heating, thermal cycling, applied stress, stressed and cycled) was investigated. Large and small compressive residual stresses were observed for the oxides and the near surface substrates, respectively. It was expected that the applied stresses and thermal cycling would cause an enhanced degree of oxidation damage that would translate into appreciable differences in residual stress values. Differences in the magnitude of residual stress values were not appreciable condition-to-condition, however. An increase in the severity of the oxidizing conditions in the form of longer oxidation times, higher oxidizing temperatures, and a much greater frequency of thermal cycling is suggested for future studies.

36 MATERIALS SCIENCE↗

Reactions of Vinyl Groups on a Model Chromia Surface: Vinyl Chloride on Stoichiometric Alpha-Cr2O3 (1012)

The thermal reaction of vinyl chloride on nearly-stoichiometric ?-Cr2O3 View the MathML source produces gas phase acetylene, ethylene, 1,3-butadiene, and dihydrogen, and results in the deposition of chlorine adatoms. No surface carbon or combustion products (CO, CO2, H2O) are observed. Thermal desorption and spectroscopic studies indicate that the surface reaction of vinyl chloride proceeds through C-Cl bond cleavage to form Cl adatoms and surface vinyl groups which dehydrogenate to acetylene, hydrogenate to ethylene, and couple to form butadiene. Cl adatoms affect surface reactivity in two ways: (1) by increasing the barrier to vinyl dehydrogenation from 145 to 160 kJ/mol, and (2) by blocking Cr3+ sites which shuts down the surface chemistry. Selectivity to butadiene is dependent on Cl adatom coverage, where the increased stability of vinyl intermediates at lower Cl coverages gives rise to more butadiene coupling product. At higher Cl coverages, Cl appears to inhibit the mobility of surface vinyl and decreases the reaction probability for coupling. Photoemission and near edge X-ray absorption fine structure (NEXAFS) spectra show that a mixed monolayer of molecular and dissociated vinyl chloride is formed at 130 K. The polarization dependence of the NEXAFS indicates that vinyl chloride ?-bonds with the molecular plane nominally parallel to the surface, while vinyl intermediates ?-bond at Cr centers with the molecular plane nominally perpendicular to the surface, in agreement with DFT predictions of the adsorption geometries.

36 MATERIALS SCIENCE↗

First-principles investigation of native interstitial diffusion in Cr2O3

First principles density functional theory (DFT) investigation of native interstitials and the associated self-diffusion mechanisms in a-Cr2O3 reveals that interstitials are more mobile than vacancies of corresponding species. Cr interstitials occupy the unoccupied Cr sublattice sites that are octahedrally coordinated by 6 O atoms, and O interstitials form a dumbbell configuration orientated along the [221] direction (diagonal) of the corundum lattice. Calculations predict that neutral O interstitials are predominant in O-rich conditions and Cr interstitials in +2 and +1 charge states are the dominant interstitial defects in Cr-rich conditions. Similar to that of the vacancies, the charge transition levels of both O and Cr interstitials are located deep within the bandgap. Transport calculations reveal a rich variety of interstitial diffusion mechanisms that are species, charge, and orientation dependent. Cr interstitials diffuse preferably along the diagonal of corundum lattice in a two step process via an intermediate defect complex comprising a Cr interstitial and an adjacent Cr Frenkel defect in the neighboring Cr bilayer. This mechanism is similar to that of the vacancy mediated Cr diffusion along the c-axis with intermediate Cr vacancy and Cr Frenkel defect combination. In contrast, O interstitials diffuse via bond switching mechanism. O interstitials in -1 and -2 charge states have very high mobility compared to neutral O interstitials.

Medasani, Bharat K.↗

Oxidative vaporization kinetics of Cr2O3 in oxygen from 1000 to 1300 C

Rates of oxidative vaporization of Cr2O3 on preoxidized resistively heated chromium were determined in flowing oxygen at a pressure of 0.115 Torr for temperatures from 1000 to 1300 C. Reaction controlled rates were obtained from experimental rates by a gold calibration technique, and these rates were shown to agree with those predicted by thermochemical analysis. The activation energy obtained for the oxidative vaporization reaction corresponded numerically with the thermochemical enthalpy of the reaction. A theoretical equation is given for calculating the rate from thermodynamic data using boundary-layer theory.

Stearns, C. A.↗

Volatile products from the interaction of KCl/g/ with Cr2O3 and LaCrO3 in oxidizing environments

Based on cooled target collection methods and high pressure mass spectrometer sampling, oxidative vaporization rates and emanating volatile products were evaluated for interactions of KCl(g) with Cr2O3 and LaCrO3 in oxidizing environments. It was found that: (1) increased rates of oxidative vaporization upon exposure to the reactants are exhibited by chromia and fresh lanthanum chromite samples, and (2) these increased rates result from the heterogeneous formation of complex molecules such as KCl sub 1,2,3CrO3 and KOH sub 1,2CrO3. No increased rates were observed for lanthanum chromite subjected to prolonged oxidative vaporization.

Kohl, F. J.↗