Investigation of dark current in ascop 541f multiplier phototubes after exposure to high light level final report, 23 oct. - 23 dec. 1964
Dark current in multiplier phototubes after high light level exposure
PHOTOMULTIPLIER↗
SEARCH · Search NASA
Results for “Current multiplier”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Closed Loop solar array-ion thruster system with power control circuitry
A power control circuit connected between a solar array and an ion thruster receives voltage and current signals from the solar array. The control circuit multiplies the voltage and current signals together to produce a power signal which is differentiated with respect to time. The differentiator output is detected by a zero crossing detector and, after suitable shaping, the detector output is phase compared with a clock in a phase demodulator. An integrator receives no output from the phase demodulator when the operating point is at the maximum power but is driven toward the maximum power point for non-optimum operation. A ramp generator provides minor variations in the beam current reference signal produced by the integrator in order to obtain the first derivative of power.
Gruber, R. P.↗
The use of the electronic system of the feu-34 photo-multiplier as an amplifier of weak ion currents
Use of electronic system of photomultiplier as amplifier of weak ion current in mass spectrometer instruments
AMPLIFIER↗
Electrostatic Propulsion Beam Divergence Effects on Spacecraft Surfaces. Volume 2, Addendum 1: Ion Time-of-flight Determinations of Doubly to Singly Ionized Mercury Ion Ratios from a Mercury Electron Bombardment Discharge
The analysis of ion exhaust beam current flow for multiply charged ion species and the application to propellant utilization for the thruster are discussed. The ion engine in use in the experiments is a twenty centimeter diameter electromagnet electron bombardment engine. The experimental technique to determine the multiply charged ion abundance ratios using ion time of flight is described. An analytical treatment of the discharge action in producing various ion species has been carried out.
Sellen, J. M., Jr.↗
Voltage-current-power meter for photovoltaic solar arrays
A meter is disclosed for measuring the voltage, current, and power (VIP) parameters of a photovoltaic solar array, or array module, under sunlight operating conditions utilizing a variable load connected across the array and controlled by a voltage regulator which responds to the difference between the output voltage of the array and a programmed test voltage from a source which generates a single ramp voltage for measuring and recording current as a function of voltage, repeated ramp voltages at a high rate for peak output measurements or a DC voltage for VIP measurements at selected points on the I-V characteristic curve of the array. The voltage signal from a current sensing element, such as a shunt resistor in series with the variable load, is compared with the output current of a reference solar cell to provide a normalizing signal to be added to the signal from the current-sensing element in order to provide a record of array current as a function of array voltage, i.e., for all load conditions from short circuit to open circuit. As the normalized current is thus measured, an analog multiplier multiplies the array voltage and normalized current to provide a measurement of power. Switches are provided to selectively connect the power, P, current, I, or voltage, V, to a meter, directly or through a peak detector. At the same time any one of the parameters V, I and P may be recorded as a function of any other parameter.
Ross, Ronald G.↗
Noise limitations of multiplier phototubes in the radiation environment of space
The contributions of Cerenkov emission, luminescence, secondary electron emission, and bremsstrahlung to radiation-induced data current and noise of multiplier phototubes were analyzed quantitatively. Fluorescence and Cerenkov emission in the tube window are the major contributors and can quantitatively account for dark count levels observed in orbit. Radiation-induced noise can be minimized by shielding, tube selection, and mode of operation. Optical decoupling of windows and cathode (side-window tubes) leads to further reduction of radiation-induced dark counts, as does reducing the window thickness and effective cathode area, and selection of window/cathode combinations of low fluorescence efficiency. In trapped radiation-free regions of near-earth orbits and in free space, Cerenkov emission by relativistic particles contributes predominantly to the photoelectron yield per event. Operating multiplier phototubes in the photon (pulse) counting mode will discriminate against these large pulses and substantially reduce the dark count and noise to levels determined by fluorescence.
Viehmann, W.↗
Error analysis in the measurement of average power with application to switching controllers
Power measurement errors due to the bandwidth of a power meter and the sampling of the input voltage and current of a power meter were investigated assuming sinusoidal excitation and periodic signals generated by a model of a simple chopper system. Errors incurred in measuring power using a microcomputer with limited data storage were also considered. The behavior of the power measurement error due to the frequency responses of first order transfer functions between the input sinusoidal voltage, input sinusoidal current, and the signal multiplier was studied. Results indicate that this power measurement error can be minimized if the frequency responses of the first order transfer functions are identical. The power error analysis was extended to include the power measurement error for a model of a simple chopper system with a power source and an ideal shunt motor acting as an electrical load for the chopper. The behavior of the power measurement error was determined as a function of the chopper's duty cycle and back EMF of the shunt motor. Results indicate that the error is large when the duty cycle or back EMF is small. Theoretical and experimental results indicate that the power measurement error due to sampling of sinusoidal voltages and currents becomes excessively large when the number of observation periods approaches one-half the size of the microcomputer data memory allocated to the storage of either the input sinusoidal voltage or current.
Maisel, J. E.↗
Variable load automatically tests dc power supplies
Continuously variable load automatically tests dc power supplies over an extended current range. External meters monitor current and voltage, and multipliers at the outputs facilitate plotting the power curve of the unit.
Burke, H. C., Jr.↗
Photoresistance analog multiplier has wide range
Photoactivated bridge facilitates equal performance of analog multipliers over a wide frequency range. The multiplier operates from direct current to an upper frequency limited by either the light source or the closed-loop amplifier.
Hartenstein, R. G.↗
Error analysis in the measurement of average power with application to switching controllers
The behavior of the power measurement error due to the frequency responses of first order transfer functions between the input sinusoidal voltage, input sinusoidal current and the signal multiplier was studied. It was concluded that this measurement error can be minimized if the frequency responses of the first order transfer functions are identical.
Maisel, J. E.↗
Monolithic CCD-array readout
Circuit is self-biasing, with differential current-to-voltage conversion. CMOS current-differencing readout consists of dc-balanced pair of virtual ground stages and current-differencing circuit similar to circuit mirror. Triode multiplier cell replaces test sources to form monolithic configuration. Transistors belonging to selected multiplier cell need to be duplicated for each multiplier within correlator chip. Remaining elements form part of readout and may be scaled as single common readout stage.
Farnsworth, D. L.↗
Lightweight multiple output converter development
A high frequency, multiple output power conditioner was developed and breadboarded using an eight-stage capacitor diode voltage multiplier to provide +1200 Vdc, and a three-stage for -350 Vdc. In addition, two rectifier bridges were capacitively coupled to the eight-stage multiplier to obtain 0.5 and 0.65 a dc constant current outputs referenced to +1200 Vdc. Total power was 120 watts, with an overall efficiency of 85 percent at the 80 kHz operating frequency. All outputs were regulated to three percent or better, with complete short circuit protection. The power conditioner component weight and efficiency were compared to the equivalent four outputs of the 10 kHz conditioner for the 8 cm ion engine. Weight reduction for the four outputs was 557 grams; extrapolated in the same ratio to all nine outputs, it would be 1100 to 1400 grams.
Kisch, J. J.↗
Characteristics of step-recovery-diode frequency multipliers
Investigation into the uses of step-recovery diodes /SRD's/ leads to the development of necessary circuitry for using fast current-switching capabilities of SRD's in frequency multiplication, the design of solid-state X-band transmitters employing SRD multipliers, and the use of SRD multipliers in a phased-array receiving antenna.
Source record↗
Status report on Physics Branch low current detector program
Improvements for low current detector components - high megohm resistors, electrometer tubes, solid state devices, modulators, electron multipliers, insulators, and high impedance switching devices
DETECTOR↗
Industrial realization of a direct Fourier transform in automated experimental data processing systems
Fourier processing of automatic signals transforms direct current voltage into a numerical form through bandpass filtration in time-pulse multiplying devices. It is shown that the ratio of the interference energy to the useful signal energy is inversely proportional to the square of the product of the depth of the width modulation and the ratio of the time constant averaging to the cross-multiplied signals.
Lyubashevskiy, G. S.↗
Apparatus for simultaneous ion counting and current recording in mass spectrometry
Ion counting system is coupled to the last dynode of an Allen-type electron multiplier on the mass analyzer of a double focusing mass spectrometer. This leaves the anode available for an electrometer, making possible simultaneous measurements. Coupling is achieved by a ferrite core transformer and associated circuitry.
Kohl, F. J.↗
A multiple access communication network based on adaptive arrays
A single frequency communication system is considered consisting of K possibly moving users distributed in space simultaneously communicating with a central station equipped with a computationally adapted array of n = or K antennas. Such a configuration could result if K spacecraft were to be simultaneously tracked by a single DSN complex consisting of an n antennas array. The array employs K sets of n weights to segregate the signals received from the K users. The weights are determined by direct computation based on known position information of the K users. Currently known techniques require (for n = K) about (4/3)K to the 4th power computer operations (multiply and add) to perform such computations. A technique that accomplishes this same goal in 8 K to the 3rd power operations, yielding a reduction by a factor K/6, was developed.
Zohar, S.↗
Analysis of magnetic fields using variational principles and CELAS2 elements
Prospective techniques for analyzing magnetic fields using NASTRAN are reviewed. A variational principle utilizing a vector potential function is presented which has as its Euler equations, the required field equations and boundary conditions for static magnetic fields including current sources. The need for an addition to this variational principle of a constraint condition is discussed. Some results using the Lagrange multiplier method to apply the constraint and CELAS2 elements to simulate the matrices are given. Practical considerations of using large numbers of CELAS2 elements are discussed.
Frye, J. W.↗