Search NASA⌕ Search

SEARCH · Search NASA

Results for “DELTA MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Coherent radar receiver that comprises a sigma delta modulator

Described herein are various technologies relating to processing a coherent signal. A receiver is configured to receive an analog signal, and process the analog signal to generate an input analog signal. The input analog signal has been modulated according to a suitable modulation sequence. A coherent signal sampler coherently samples the modulation sequence, and the result of such sampling is in turn used to demodulate the input analog signal. The resultant signal is then passed to a sigma delta modulator, where it is converted to digital form.

47 OTHER INSTRUMENTATION↗

Delta Modulation Technique for Improving the Sensitivity of Monobit Subsamplers in Radar and Coherent Receiver Applications

This paper introduces a technique for improving the sensitivity of RF subsamplers in radar and coherent receiver applications. The technique, referred to herein as “delta modulation” (DM), feeds the time-average output of a monobit analog-to-digital converter (ADC) back to the ADC input, but with opposite polarity. Assuming pseudo-stationary modulation statistics on the sampled RF waveform, the feedback signal corrects for aggregate DC offsets present in the ADC that otherwise degrade ADC sensitivity. Two RF integrated circuits (RFICs) are designed to demonstrate the approach. One uses analog DM to create the feedback signal; the other uses digital DM to achieve the same result. A series of tests validates the designs. The dynamic time-domain response confirms the feedback loop’s basic operation. Measured output quantization imbalance, under noise-only input drive, significantly improves with the use of the DM circuit, even for large, deliberately induced DC offsets and wide temperature variation from -55°C to +85 °C. Examination of the corrected vs. uncorrected baseband spectrum under swept input signal-tonoise ratio (SNR) conditions demonstrates the effectiveness of this approach for realistic radar and coherent receiver applications. In conclusion, two-tone testing shows no impact of the DM technique on ADC linearity.

47 OTHER INSTRUMENTATION↗

Phosphorylation of serine-504 of tNOX (ENOX2) modulates cell proliferation and migration in cancer cells

Tumor-associated NADH oxidase (tNOX; ENOX2) is a growth-related protein expressed in transformed cells. Consistent with this function, tNOX knockdown by RNA interference leads to a significant reduction in cell proliferation and migration in HeLa cells, whereas tNOX overexpression confers an aggressive phenotype. Here, for the first time, we report that tNOX is phosphorylated by protein kinase C{delta} (PKC{delta}) both in vitro and in vivo. Replacement of serine-504 with alanine significantly reduces phosphorylation by PKC{delta}. Co-immunoprecipitation experiments reveal an interaction between tNOX and PKC{delta}. Moreover, whereas overexpression of wild-type tNOX in NIH3T3 cells increases cell proliferation and migration, overexpression of the S504A tNOX mutant leads to diminished cell proliferation and migration, reflecting reduced stability of the unphosphorylatable tNOX mutant protein. Collectively, these results suggest that phosphorylation of serine-504 by PKC{delta} modulates the biological function of tNOX.

60 APPLIED LIFE SCIENCES↗

Polymer Inhibitors Enable >900 cm2 Dynamic Windows Based on Reversible Metal Electrodeposition with High Solar Modulation

Dynamic windows with adjustable tint give users control over the flow of light and heat to decrease the carbon footprint of buildings and improve the occupants’ comfort. Despite the benefits of dynamic windows, they are rarely deployed in buildings because the existing technology cannot achieve fast and colour-neutral tinting at an agreeable cost. Reversible metal electrodeposition is a promising approach to solve these problems. Here, we demonstrate the use of polymer inhibitors to reversibly deposit metal films with controlled morphology in dynamic windows. The windows that employ the polymer inhibitor can readily tint to below 0.001% visible transmittance in less than 3 min and exhibit high infrared reflectance (>70%), colour-neutral transmittance (C*<5) and an ultrawide range of optical and solar modulation (..delta..Tvis=0.76 and ..delta..SHGC=0.56). The polymer inhibitors also increase the efficiency and improve the durability of the windows and enable construction of >900 cm2 dynamic windows with fast response and excellent uniformity.

36 MATERIALS SCIENCE↗

Real-Time Lossless Compression for Ultra-High-Density Synchrophasor and Point on Wave Data

Modern advanced Phasor Measurement Units (PMUs) are developed with ultra-high reporting rates to meet the demand for monitoring the power systems dynamics in detail. Due to the large volume of data, the communication and storage systems are seriously challenged with the presence of Ultra-High-Density (UHD) synchrophasor and Point on Wave (POW) data. Therefore, it is an urgent task to compress the UHD data for more efficient communication and data storage. This paper proposes several methods to compress the synchrophasor and POW data in a lossless manner. First, an Improved-Time-Series-Special Compression (ITSSC) method is proposed to compress the UHD frequency data. Second, a Delta-difference Huffman method is combined with the TSSC algorithm to compress the UHD phase angle data. Finally, a cyclical high-order delta modulation method is proposed to compress the UHD POW data. The proposed models are extensively tested and compared with different existing lossless compression algorithms using the field-collected synchrophasor and POW data at different reporting rates. The results indicate that the proposed algorithms are efficient in performing lossless compression for the UHD synchrophasor and POW data in real time.

42 ENGINEERING↗

Assessing Several Modeling Approaches in Depletion Studies of a TRISO-Fueled Microreactor

The impact of MCNP6 depletion resolution on core lifetime is examined in the context of the Snowflake microreactor with explicit TRISO fuel. The change in core lifetime and isotope mass as a result of different tracked isotopes, timesteps, and spatial regions is discussed. Calculation speed of a prototype MCNP delta tracking module is compared to a reactivity equivalent physical transformation (RPT). Using a single depletion material underpredicts core lifetime by 15%, and the resolution necessary to converge isotope mass greatly depends on the specific isotope, in addition to the size (and location) of the depletion region. The prototype delta tracking module decreases the CPU time of explicit TRISO criticality calculations by 30%, but does not always result in a speedup when used with depletion. Significant depletion speedup is obtained using RPT (50% faster), and all isotope masses agreed within three percent.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermo-optic modulation of plasmonic bandgap on metallic photonic crystal slab

We demonstrate active control of plasmonic bandgap on a metallic photonic crystal slab using thermo-optic effects. The Au grating, which is milled by focused-ion beam on a glass substrate, is designed to exhibit an extraordinary optical transmission and a sharp transitional edge for high modulation efficiency. Only a moderate refractive index modulation of {Delta}n = 0.0043 is required to obtain more than 60% modulation depth with surface-normal optical coupling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitation of surface plasma waves by a density-modulated electron beam in a magnetized plasma cylinder

A density-modulated electron beam propagating through a plasma cylinder excites surface plasma waves (SPWs) via Cerenkov and fast cyclotron interaction. A nonlocal theory of this process has been developed. Numerical calculations of the growth rate and unstable mode frequencies have been carried out for the typical parameters of the SPWs. The growth rate {gamma} (in rad/s) of the unstable wave instability increases with the modulation index {Delta} and has the largest value for {Delta}{approx}1 in addition to when the frequency and wave number of the modulation are comparable to that of the unstable wave. For {Delta}=0, {gamma} turns out to be {approx}6.06x10{sup 9} rad/s for Cerenkov interaction and {approx}5.47x10{sup 9} rad/s for fast cyclotron interaction. The growth rate of the instability increases with the beam density and scales as one-third power of the beam density in Cerenkov interaction and is proportional to the square root of beam density in fast cyclotron interaction. The real part of the frequency of the unstable wave increases as almost the square root of the beam voltage. The results of the theory are applied to explain some of the experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Pixel Pitch-Matched Ultrasound Receiver for 3-D Photoacoustic Imaging With Integrated Delta-Sigma Beamformer in 28-nm UTBB FD-SOI

This study presents a pixel pitch-matched readout chip for 3-D photoacoustic (PA) imaging, featuring a dedicated signal conditioning and delta-sigma modulation integrated within a pixel area of 250 μm by 250 μm. The proof-of-concept receiver was implemented in an STMicroelectronics's 28-nm Fully Depleted Silicon On Insulator technology, and interfaces to a 4 × 4 subarray of capacitive micromachined ultrasound transducers (CMUTs). The front-end signal conditioning in each pixel employs a coarse/fine gain tuning architecture to fulfill the 90-dB dynamic range requirement of the application. The employed delta-sigma beamforming architecture obviates the need for area-consuming Nyquist ADCs and thereby enables an efficient in-pixel A/D conversion. The per-pixel switched-capacitor ΔΣ modulator leverages slewing-dominated and area-optimized inverter-based amplifiers. It occupies only 1/4th of the pixel, and its area compares favorably with state-of-the-art designs that offer the same SNR and bandwidth. The modulator's measured peak signal-to-noise-and-distortion ratio is 59.9 dB for a 10-MHz input bandwidth, and it consumes 6.65 mW from a 1V supply. The overall subarray beamforming approach improves the area per channel by 7.4 times and the single-channel SNR by 8 dB compared to prior art with similar delay resolution and power dissipation. Finally, the functionality of the designed chip was evaluated within a PA imaging experiment, employing a flip-chip bonded 2-D CMUT array.

3-D photoacoustic (PA) imaging↗

Blocker-tolerant and high-sensitivity $Δ$\!$Σ$ correlation digitizer for radar and coherent receiver applications

In this study, a coherent subsampling digitizer for pulsed Doppler radar systems is proposed. Prior to transmission, the radar system modulates the RF pulse with a known pseudorandom binary phase shift keying (BPSK) sequence. Upon reception, the radar digitizer uses a programmable sample-and-hold circuit to multiply the received waveform by a properly time-delayed version of the known a priori BPSK sequence. This operation demodulates the desired echo signal while suppressing the spectrum of all in-band noncorrelated interferers, making them appear as noise in the frequency domain. The resulting demodulated narrowband Doppler waveform is then subsampled at the IF frequency by a delta-sigma modulator. Because the digitization bandwidth within the delta-sigma feedback loop is much less than the input bandwidth to the digitizer, the thermal noise outside of the Doppler bandwidth is effectively filtered prior to quantization, providing an increase in signal-to-noise ratio (SNR) at the digitizer's output compared with the input SNR. In this demonstration, a delta-sigma correlation digitizer is fabricated in a 0.18-μm CMOS technology. The digitizer has a power consumption of 1.12 mW with an IIP3 of 7.5 dBm. The digitizer is able to recover Doppler tones in the presence of blockers up to 40 dBm greater than the Doppler tone.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

TOWARD IDENTIFYING THE UNASSOCIATED GAMMA-RAY SOURCE 1FGL J1311.7-3429 WITH X-RAY AND OPTICAL OBSERVATIONS

We present deep optical and X-ray follow-up observations of the bright unassociated Fermi-LAT gamma-ray source 1FGL J1311.7-3429. The source was already known as an unidentified EGRET source (3EG J1314-3431, EGR J1314-3417), hence its nature has remained uncertain for the past two decades. For the putative counterpart, we detected a quasi-sinusoidal optical modulation of {Delta}m {approx} 2 mag with a period of {approx_equal}1.5 hr in the Rc, r', and g' bands. Moreover, we found that the amplitude of the modulation and peak intensity changed by {approx}>1 mag and {approx}0.5 mag, respectively, over our total six nights of observations from 2012 March to May. Combined with Swift UVOT data, the optical-UV spectrum is consistent with a blackbody temperature, kT {approx_equal} 1 eV and the emission volume radius R{sub bb} {approx_equal} 1.5 Multiplication-Sign 10{sup 4} d{sub kpc} km (d{sub kpc} is the distance to the source in units of 1 kpc). In contrast, deep Suzaku observations conducted in 2009 and 2011 revealed strong X-ray flares with a light curve characterized with a power spectrum density of P(f) {proportional_to} f {sup -2.0{+-}0.4}, but the folded X-ray light curves suggest an orbital modulation also in X-rays. Together with the non-detection of a radio counterpart, and significant curved spectrum and non-detection of variability in gamma-rays, the source may be the second 'radio-quiet' gamma-ray emitting millisecond pulsar candidate after 1FGL J2339.7-0531, although the origin of flaring X-ray and optical variability remains an open question.

79 ASTRONOMY AND ASTROPHYSICS↗

Incommensurately modulated LT''-Ni{sub 1+{delta}}Sn (delta=0.60, 0.63): Rietveld refinement, line-broadening analysis and structural relation with LT- and LT'-Ni{sub 1+{delta}}Sn

X-ray powder diffraction data of NiAs/Ni{sub 2}In-type Ni{sub 1.60}Sn and Ni{sub 1.63}Sn alloys annealed at or below about 573 K reveal the development of an incommensurately ordered phase called LT''. In this phase Ni(2) atoms occupy partially the trigonal-bipyramidal interstices formed by five Sn within an NiAs-type arrangement Ni(1)Sn. The modulated occupational ordering of Ni(2) in the LT'' phase can be described in the superspace group Cmcm(alpha00)0 s 0, and the parameters describing this occupational modulation were refined together with atomic displacement modulations using the Rietveld method. The structure parameters revealed close structural analogies of the LT'' phase with the previously reported commensurate LT-Ni{sub 1+{delta}}Sn and incommensurate LT'-Ni{sub 1+{delta}}Sn phases (A. Leineweber, J. Solid State Chem. 177 (2004) 1197-1212), which both occur for lower Ni contents than the LT'' phase. The 1st-order satellite reflections visible in the powder-diffraction patterns exhibit, with respect to the fundamental reflections, a considerable diffraction-line broadening, caused by a small size of the particularly ordered domains. This small-domain-size broadening was successfully described by a recently developed reflection-index (hklm) dependent (anisotropic) line-broadening model (A. Leineweber, V. Petricek, J. Appl. Crystallogr. 40 (2007) 1027-1034) designed to consider the effect of fluctuations of the lattice metrics on the peak widths in powder diffraction patterns of incommensurately modulated crystal structures. The small domain sizes encountered for the LT'' phase indicate that domain coarsening is much more difficult than for the LT and LT' phases. This special feature of the LT'' phase goes along with a compared to the LT and LT' phases absent orthorhombic distortion and the low ordering temperature, which are discussed as a consequence of the ordering patterns due to the Ni(2) atoms. - Graphical abstract: Approximant structure of incommensurately modulated LT''-Ni{sub 1.60}Sn, forming below 573 K from the disordered phase. The phase has a close structural relationship to the LT and LT' phases occurring at lower Ni contents.

36 MATERIALS SCIENCE↗

On the mechanism of transverse-mode beatings in a Fabry - Perot laser

The mechanism of emergence of fundamental-mode and first-mode beatings in the case of a step-wise increase in the pump rate is studied under the stationary single-mode lasing conditions. Investigation is based on the numerical solution of nonstationary wave equations in a resonator in the quasi-optic approximation and on the equation for a relaxation-type medium as well as on the use of the first two Hermite - Gaussian polynomials {psi}{sub 0,1}(x) to obtain the distribution projections I{sub 0,1}(t), g{sub 0,1}(t) of the radiation intensity and gain, respectively. It is shown that the transverse-mode beatings emerge at early stages of two-mode lasing, the appearance of radiation intensity oscillations in the active medium preceding the development of the gain oscillations. The time of the passage of two-mode lasing to the stationary regime is determined. The phase shift {pi}/2 between the oscillations I{sub 1}(t) and g{sub 1}(t) is found for the established beating regime and the modulation depth {Delta}I averaged over the output aperture of the radiation intensity in the established two-mode regime is shown to be proportional to the pump rate excess k over the single-mode lasing threshold. A scheme for controlling the mode composition of laser radiation is proposed, which is based on the rules for determining I{sub 0,1}(t) by the sensor signals. The efficiency of the scheme is studied. The scheme employs two field intensity sensors mounted inside the resonator behind the output aperture. (resonators. modes)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ORBITAL PERIOD CHANGES AND THEIR EVOLUTIONARY STATUS FOR THE WEAK-CONTACT BINARIES. III. AO CAMELOPARDALIS AND AH TAURI

In this paper, we presented multicolor photometric observations for two eclipsing binaries, AO Camelopardalis and AH Tauri, obtained on 2008 December 16 and 17. Using the Wilson-Devinney Code, the photometric solution of AH Tau was determined from our new CCD data. The mass ratio and the fill-out factor are q = 0.503({+-}0.003) and f = 10.8%({+-}0.1%), respectively. This indicates that AH Tau is in weak contact. For the weak-contact binary AO Cam, BVI light curves clearly show a difference in the heights of the maxima (i.e., the O'Connell effect), which may be explained by spot activity. By analyzing the O - C curves for AO Cam and AH Tau, it is found that the orbital periods appear to show a secular period decrease with a cyclic variation. The observed period modulation is {delta}P/P {approx} 10{sup -6}. For AO Cam, the cyclic oscillation with a short period of 7.63({+-}0.07) yr and a low amplitude of 0fd0019({+-}0fd0003) may be preferably attributed to the cyclic magnetic activity. The period and amplitude of the cyclic variation for AH Tau are 45.8({+-}1.1) yr and 0fd0171({+-}0fd0005), which may more likely result from the light-time effect via a third body. The secular period decrease rates are dP/dt = -1.26({+-}0.04) x 10{sup -7} days yr {sup -1} for AO Cam and dP/dt = -6.98({+-}0.07) x 10{sup -8} days yr {sup -1} for AH Tau. This kind of period decrease can be plausibly explained by the mass transfer from the primary to the secondary, and may result in the system evolving into a deep contact configuration.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of beam premodulation on excitation of surface plasma waves in a magnetized plasma

A density modulated electron beam propagating through a vacuum magnetized plasma interface drives electromagnetic surface plasma waves (SPWs) to instability via Cerenkov and fast cyclotron interaction. Numerical calculations of the growth rate and unstable mode frequencies have been carried out for the typical parameters of the SPWs. The growth rate {gamma} of the unstable wave instability increases with the modulation index ({Delta}) and is maximized for {Delta}=1. For {Delta}=0, {gamma} turns out to be {approx}4.32x10{sup 10} rad/s for Cerenkov interaction and {approx}6.81x10{sup 10} rad/s for fast cyclotron interaction. The growth rate of the instability increases with the beam density and scales as one-third power of the beam density in Cerenkov interaction and is proportional to the square root of beam density in fast cyclotron interaction. In addition, the real frequency of the unstable wave increases with the beam-energy and scales as almost one-half power of the beam-energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗