Results for “DFR”

NASA NTRS2022

A Generalized Dual-Frequency Ratio (DFR) Approach for Rain Retrievals

The dual-frequency ratio of radar reflectivity factors (DFR) has been shown to be a useful quantity as it is independent of the number concentration of the particle size distribution and primarily a function of the mass-weighted particle diameter, Dm. A drawback of DFR-related methods for rain estimation, however, is the non-unique relationship between Dm and DFR. At Ku- and Ka-band frequencies, two solutions for Dm exist when DFR is less than zero. This ambiguity generates multiple solutions for the range profiles of the particle size parameters. We investigate characteristics of these solutions for both the initial-value (forward) and final-value (backward) forms of the equations. To choose one of among many possible range profiles of Dm, number concentration and rain rate, R, independently measured path attenuations are used. For the backward approach the possibility exists of dispensing with externally measured path attenuations by achieving consistency between the input and output path attenuations. The methods are tested by means of a simulation based on disdrometer-measured raindrop size distributions and the results are compared with a simplified version of the operational R-Dm method.

Robert Meneghini↗

NASA NTRSDate not supplied

Design for Reliability (DfR) in Space Life Support

The engineering process of Design for Reliability (DfR) is well established in the automotive and aerospace industries. DfR should be useful in the future development of space life support systems. DfR is a sequence of tasks that develop system requirements and plan reliability analysis and testing. First and fundamentally, the reliability requirement is defined. Next the system reliability model is developed, often using a reliability block diagram. The overall system reliability requirement is allocated to the subsystems and an estimate of the attainable reliability is made. This expected reliability can be improved by simplifying the design by removing components or by replacing less reliable components. Improving reliability can require difficult compromises, such as reducing performance requirements, increasing budget, or extending testing. The actual system reliability can be determined only by testing, which should continue long enough to provide the required confidence in the measured value. New systems often have unexpected design errors that cause failures in early testing. The usual reliability improvement process of testing, finding the failure modes, and redesigning to remove them reduces the failure rate and is referred to as “reliability growth.” After redesign has been completed, the system should be further tested to determine the actual achieved reliability more accurately. If the final system failure rate is too high, redundant systems can be used to improve overall operational reliability. Adding redundancy simply to increase the one- or two-fault tolerance metric may sometimes reduce reliability. Reliability can be improved in three ways: redesigning the system to include more reliable subsystems and components, reliability growth testing and failure mode removal, and by using parallel redundant systems. DfR should combine these approaches to achieve the required reliability while managing performance, cost, and schedule.

Reliability↗

NASA NTRSDate not supplied

Design for Reliability (DfR) in Space Life Support

The engineering process of Design for Reliability (DfR) is well established in the automotive and aerospace industries. DfR should be useful in the future development of space life support systems. DfR is a sequence of tasks that develop system requirements and plan reliability analysis and testing. First and fundamentally, the reliability requirement is defined. Next the system reliability model is developed, often using a reliability block diagram. The overall system reliability requirement is allocated to the subsystems and an estimate of the attainable reliability is made. This expected reliability can be improved by simplifying the design by removing components or by replacing less reliable components. Improving reliability can require difficult compromises, such as reducing performance requirements, increasing budget, or extending testing. The actual system reliability can be determined only by testing, which should continue long enough to provide the required confidence in the measured value. New systems often have unexpected design errors that cause failures in early testing. The usual reliability improvement process of testing, finding the failure modes, and redesigning to remove them reduces the failure rate and is referred to as “reliability growth.” After redesign has been completed, the system should be further tested to determine the actual achieved reliability more accurately. If the final system failure rate is too high, redundant systems can be used to improve overall operational reliability. Adding redundancy simply to increase the one- or two-fault tolerance metric may sometimes reduce reliability. Reliability can be improved in three ways: redesigning the system to include more reliable subsystems and components, reliability growth testing and failure mode removal, and by using parallel redundant systems. DfR should combine these approaches to achieve the required reliability while managing performance, cost, and schedule.

Reliability↗

NASA NTRS2014

Deployable Fresnel Rings

Deployable Fresnel rings (DFRs) significantly enhance the realizable gain of an antenna. This innovation is intended to be used in combination with another antenna element, as the DFR itself acts as a focusing or microwave lens element for a primary antenna. This method is completely passive, and is also completely wireless in that it requires neither a cable, nor a connector from the antenna port of the primary antenna to the DFR. The technology improves upon the previous NASA technology called a Tri-Sector Deployable Array Antenna in at least three critical aspects. In contrast to the previous technology, this innovation requires no connector, cable, or other physical interface to the primary communication radio or sensor device. The achievable improvement in terms of antenna gain is significantly higher than has been achieved with the previous technology. Also, where previous embodiments of the Tri-Sector antenna have been constructed with combinations of conventional (e.g., printed circuit board) and conductive fabric materials, this innovation is realized using only conductive and non-conductive fabric (i.e., "e-textile") materials, with the possible exception of a spring-like deployment ring. Conceptually, a DFR operates by canceling the out-of-phase radiation at a plane by insertion of a conducting ring or rings of a specific size and distance from the source antenna, defined by Fresnel zones. Design of DFRs follow similar procedures to those outlined for conventional Fresnel zone rings. Gain enhancement using a single ring is verified experimentally and through computational simulation. The experimental test setup involves a microstrip patch antenna that is directly behind a single-ring DFR and is radiating towards a second microstrip patch antenna. The first patch antenna and DFR are shown. At 2.42 GHz, the DFR improves the transmit antenna gain by 8.6 dB, as shown in Figure 2, relative to the wireless link without the DFR. A figure illustrates the relative strength of power coupling between the first and second microstrip antennas with and without the DFR. Typically, a DFR is designed for use at a particular frequency; however, testing of a DFR indicated a relatively wide operational bandwidth of approximately 8.2%. Wider bandwidth operation and multi-band operation are anticipated by extending the known art of conventional Fresnel rings to the DFRs. Increasing the number of rings used to construct a DFR antenna increases the gain, with the upper bound limited often by the largest practical dimensions that can be tolerated for a given application. The maximum theoretical improvement in gain for a single ring is 9.5 dB. Experimental results are within 0.9 dB of this theoretical value. Adding rings increases gain, and theoretically, improvements of 10 to 13 dB above that of the primary antenna gain can be achieved with two- and three-ring versions.

Kennedy, Timothy F.↗

NASA NTRS2012

Antimicrobial Resources for Disinfection of Potable Water Systems for Future Spacecraft

As human exploration adventures beyond low earth orbit, life support systems will require more innovation and research to become self-sustaining and durable. One major concern about future space travel is the ability to store and decontaminate water for consumption and hygiene. This project explores materials and technologies for possible use in future water systems without requiring point-of-use (POU) filtering or chemical additives such as iodine or silver that require multiple doses to remain effective. This experimentation tested the efficacy of a variety of antimicrobial materials against biofilm formation in a high shear CDC Biofilm Reactor (CBR) and some materials in a low shear Drip Flow Reactor (DFR) which(also utilizes ultra violet light emitting diodes (UVLEDs) as an antimicrobial resource. Most materials were tested in the CBR using the ASTM E 2562-07 1method involving the Pseudomonas aeruginosa and coupon samples that vary in their antimicrobial coatings and surface layer topographies. In a controlled environmental chamber (CEC), the CBR underwent a batch phase, continuous flow phase (CFP), and a harvest before analysis. The DFR portion of this experimentation was performed in order to assess the antimicrobial capabilities of ultraviolet-A LEDs (UV-A) in potable water systems. The ASTM E 2647-08 was modified in order to incorporate UV-A LEDs and to operate as a closed, re-circulating system. The modified DFR apparatus that was utilized contains 4 separate channels each of which contain 2 UV-A LEDs (1 chamber is masked off to serve as a control) and each channel is equipped with its own reservoir and peristaltic pump head. The 10 DFR runs discussed in this report include 4 initial experimental runs that contained blank microscope slides to test the UVA LEDs alone, 2 that incorporated solid silver coupons, 2 that utilized titanium dioxide (Ti02) coupons as a photocatalyst, and 2 runs that utilized silver coated acrylic slides. Both the CBR and DFR experiments were analyzed for microbial content via heterotrophic plate counts (HPC) and acridine orange direct counts (AODC). Ofthe materials used in the CBR, only two materials performed as anti~icrobials under high shear conditions (a reduction of 5 or more logs) showing a>7 log reduction in viable microbes.

Morford, Megan A.↗

NASA NTRS2024

An Airborne Multi-Frequency Microwave Analysis of Precipitation within Two Winter Cyclones

NASA’s Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) field campaign gathered data using “satellite-simulating” (albeit with higher-resolution data than satellites currently provide) and in situ aircraft to study snowstorms, with an emphasis on banding. This study used three IMPACTS microwave instruments—two passive and one active—chosen for their sensitivity to precipitation microphysics. The 10–37-GHz passive frequencies were well suited for detecting light precipitation and differentiating rain intensities over water. The 85–183-GHz frequencies were more sensitive to cloud ice, with higher cloud tops manifesting as lower brightness temperatures, but this did not necessarily correspond well to near-surface precipitation. Over land, retrieving precipitation information from radiometer data is more difficult, requiring increased reliance on radar to assess storm structure. A dual-frequency ratio (DFR) derived from the radar’s Ku- and Ka-band frequencies provided greater insight into storm microphysics than reflectivity alone. Areas likely to contain mixed-phase precipitation (often the melting layer/bright band) generally had the highest DFR, and high-altitude regions likely to contain ice usually had the lowest DFR. The DFR of rain columns increased toward the ground, and snowbands appeared as high-DFR anomalies.

Amanda Richter↗

NASA NTRS2008

Retrieval of Snow and Rain From Combined X- and W-B and Airborne Radar Measurements

Two independent airborne dual-wavelength techniques, based on nadir measurements of radar reflectivity factors and Doppler velocities, respectively, are investigated with respect to their capability of estimating microphysical properties of hydrometeors. The data used to investigate the methods are taken from the ER-2 Doppler radar (X-band) and Cloud Radar System (W-band) airborne Doppler radars during the Cirrus Regional Study of Tropical Anvils and Cirrus Layers-Florida Area Cirrus Experiment campaign in 2002. Validity is assessed by the degree to which the methods produce consistent retrievals of the microphysics. For deriving snow parameters, the reflectivity-based technique has a clear advantage over the Doppler-velocity-based approach because of the large dynamic range in the dual-frequency ratio (DFR) with respect to the median diameter Do and the fact that the difference in mean Doppler velocity at the two frequencies, i.e., the differential Doppler velocity (DDV), in snow is small relative to the measurement errors and is often not uniquely related to Do. The DFR and DDV can also be used to independently derive Do in rain. At W-band, the DFR-based algorithms are highly sensitive to attenuation from rain, cloud water, and water vapor. Thus, the retrieval algorithms depend on various assumptions regarding these components, whereas the DDV-based approach is unaffected by attenuation. In view of the difficulties and ambiguities associated with the attenuation correction at W-band, the DDV approach in rain is more straightforward and potentially more accurate than the DFR method.

Liao, Liang↗

NASA NTRS2024

Uncrewed Aerial Systems for Emergency Medical First Response: A Market Research Report

This report presents the findings from market research conducted for NASA’s Aerial Aid Convergent Aeronautics Solutions (CAS) exploration project, which aims to assess the current state of the market and technological readiness for Uncrewed Aerial Systems (UAS) for medical emergency first response. The research reveals a robust and rapidly growing market for UAS, with a notable emerging sector for Drones as First Responders (DFR). Despite this growth, DFR applications are currently limited by regulatory, technical, and other challenges, which restrict their use primarily to manned remote video surveillance, and therefore are primarily employed by police units. To our knowledge, there is no evidence of UAS being utilized by medical first responders for scene assessment. Limited evidence exists for closely related applications; however, these are mostly confined to pilot programs for the delivery of medical supplies or equipment. Although there has been discussion around fully autonomous DFR applications for medical purposes such as UAS ambulances or patient transport drones, these applications are generally not yet operational in practice. The technology for full autonomy, especially in guidance and control, has seen significant advancements, and recent Federal Aviation Administration (FAA)regulations are likely to accelerate adoption. Computer vision algorithms for fully autonomous medical emergency response scene surveillance are primed for advancement and deployment. A notable gap likely exists between advancements in computer vision research and what is being integrated in the commercial DFR sector. This gap is primarily due to challenges such as quality assurance for autonomous systems, the availability of application-specific training datasets for computer vision algorithms, regulatory constraints, and public perception and privacy concerns.

Joshua M Fody↗

NASA NTRS2020

New Flight Rules to Enable the Era of Aerial Mobility in the National Airspace System

In the 21st Century, new aviation markets, vehicle types, and technologies are fast emerging, inspiring new operational concepts for the National Airspace System such as Unmanned Aircraft Systems Traffic Management and Urban Air Mobility. These novel operations envision a dramatic increase in aerial mobility, or the ability to navigate freely through the airspace with unprecedented access and operational flexibility. Implementing these concepts presents a major challenge to the existing operational modes of Visual Flight Rules (VFR) and Instrument Flight Rules (IFR), developed under the limitations of early 20th Century technology and procedures to ensure safe navigation and separation from traffic. To meet this challenge and to support the needs of operators in the 21st Century and beyond, this paper proposes that VFR and IFR be augmented by new flight rules – Digital Flight Rules (DFR) – that leverage modern and emerging technologies and are not bound by restrictions borne of the state of technology 75-100 years ago. The objective of DFR is to provide safe and unfettered access to the airspace to all participating vehicle operators under all visibility conditions without incurring the limitations in operational flexibility inherent to IFR and even VFR. Advancements in communications, navigation, surveillance, aircraft connectivity, information access, automation technology, and supporting ground infrastructure provide the opportunity for the vehicle operator to engage at an unprecedented level in managing their flights regardless of flight visibility. Under DFR, these advancements enable the vehicle operator to assume full responsibility for traffic separation and therefore full trajectory management authority in all visibility conditions and airspace regions. The changes in roles and responsibilities are expected to enable greater airspace access and operational flexibility than afforded by IFR and VFR, thus enabling the emergence of new operations and a new era of advanced aerial mobility.

Mobility↗

NASA NTRSDate not supplied

Digital Flight: Enabling the Era of Scalable Mobility in the National Airspace System

In the 21st Century, new aviation markets, vehicle types, and technologies are fast emerging, inspiring new operational concepts for the National Airspace System such as Unmanned Aircraft Systems Traffic Management and Urban Air Mobility. These novel operations envision a dramatic increase in aerial mobility, or the ability to navigate freely through the airspace with unprecedented access and operational flexibility. Implementing these concepts presents a major challenge to the existing operational modes of Visual Flight Rules (VFR) and Instrument Flight Rules (IFR), developed under the limitations of early 20th Century technology and procedures to ensure safe navigation and separation from traffic. To meet this challenge and to support the needs of operators in the 21st Century and beyond, this paper proposes that VFR and IFR be augmented by new flight rules – Digital Flight Rules (DFR) – that leverage modern and emerging technologies and are not bound by restrictions borne of the state of technology 75-100 years ago. The objective of DFR is to provide safe and unfettered access to the airspace to all participating vehicle operators under all visibility conditions without incurring the limitations in operational flexibility inherent to IFR and even VFR. Advancements in communications, navigation, surveillance, aircraft connectivity, information access, automation technology, and supporting ground infrastructure provide the opportunity for the vehicle operator to engage at an unprecedented level in managing their flights regardless of flight visibility. Under DFR, these advancements enable the vehicle operator to assume full responsibility for traffic separation and therefore full trajectory management authority in all visibility conditions and airspace regions. The changes in roles and responsibilities are expected to enable greater airspace access and operational flexibility than afforded by IFR and VFR, thus enabling the emergence of new operations and a new era of advanced aerial mobility.

Mobility↗

NASA NTRS2010

A Study on Feasibility of Dual-Wavelength Radar for Identification of Hydrometeor Phases

An important objective for the Dual-wavelength Ku-/Ka-band Precipitation Radar (DPR) that will be on board the Global Precipitation Measuring (GPM) core satellite, is to identify the phase state of hydrometeors along the range direction. To assess this, radar signatures are simulated in snow and rain to explore the relation between the differential frequency ratio (DFR), defined as the difference of radar reflectivity factors between Ku- and Ka-bands, and the radar reflectivity factor at Ku-band, ZKu, for different hydrometeor types. Model simulations indicate that there is clear separation between snow and rain in the ZKu-DFR plane assuming that the snow follows the Gunn-Marshall size distribution (1958) and rain follows the Marshall-Palmer size distribution (1948). In an effort to verify the simulated results, the data collected by the Airborne Second Generation Precipitation Radar (APR-2) in the Wakasa Bay AMSR-E campaign are employed. Using the signatures of Linear Depolarization Ratio (LDR) at Ku-band, the APR-2 data can be easily divided into the regions of snow, mixed phase and rain for stratiform storms. These results are then superimposed onto the theoretical curves computed from the model in the ZKu-DFR plane. It has been found that in 90% of the cases, snow and rain can be distinguished if the Ku-band radar reflectivity exceeds 18 dBZ (the minimum detectable level of GPM DPR at Ku-band). This is also the case for snow and mixed-phase hydrometeors. Although snow can be easily distinguished from rain and melting hydrometeors by using Ku- and Ka-band radar, the rain and mixed-phase particles are not always separable. It is concluded that Ku- and Ka-band dual-wavelength radar might provide a potential means to identify the phase state of hydrometeors.

Liao, Liang↗

NASA NTRS2022

Digital Flight: A New Cooperative Operating Mode to Complement VFR and IFR

Digital Flight is a proposed new operating mode for all airspace users, complementing and adding to the existing operating modes of visual and instrument flight rules (VFR and IFR) and providing for cooperative integration in controlled airspace. Under new regulations (Digital Flight Rules, DFR) that set requirements for its sustained use, qualified operators employ Digital Flight to enhance their airspace access and operational flexibility in all visibility conditions and eventually all airspace classes without requiring segregation from incumbent operations. Enabled by connected digital information and technologies, Digital Flight operators employ cooperative practices and self-separation to ensure flight path safety in lieu of visual procedures or receiving separation services from Air Traffic Control. Its distributed structure and automated functions enable traffic densities and operational tempos not achievable with the existing operating modes. Various ongoing and emerging industry initiatives for enabling new entrants (e.g., unmanned aircraft systems, urban air taxis) and enhanced use of underserved airspace (e.g., ultra-high altitude), are pursuing various alternative operating modes with significant similarities, creating a unique and time-limited opportunity for harmonization and convergence. Digital Flight is proposed to serve that harmonizing role, creating a common new paradigm for airspace operations. Such convergence would not only bring together these emerging market segments but will also bolster the existing operators with access to this new operating mode and its advantages. Digital Flight provides an opportunity to focus regulatory development and benefit the aviation industry. This paper describes Digital Flight in sufficient detail to initiate community engagement and deliberation on a common new operating mode. It describes the essential elements, principal capabilities, and operational integration of DFR in shared airspace. It describes the value proposition from multiple perspectives and presents initial thoughts on the path forward.

Digital flight↗

NASA NTRS1989

A mesoscale numerical simulation of an index for use in the forecasting of the potential severity of wet microbursts

This paper demonstrates the feasibility of using the wet microburst potential intensity index developed by Proctor (1989) for predicting the onset of a wet microburst. After describing the index and the principles involved in its derivation, the version 4.0 of the Mesoscale Atmospheric Simulation System (MASS) model described by Karyampudi et al. (1988) was used to illustrate how the index would perform as a forecast product. An analysis is presented of the use of the microburst potential intensity index in the numerical simulation of the DFR aircraft accident on August 2, 1985 in a downburst environment.

Zack, John W.↗

NASA NTRS1993

The critical density for star formation in HII galaxies

The star formation rate (SFR) in galaxies is believed to obey a power law relation with local gas density, first proposed by Schmidt (1959). Kennicutt (1989) has shown that there is a threshold density above which star formation occurs, and for densities at or near the threshold density, the DFR is highly non-linear, leading to bursts of star formation. Skillman (1987) empirically determined this threshold for dwarf galaxies to be approximately 1 x 10(exp 21) cm(exp -2), at a linear resolution of 500pc. During the course of our survey for HI companion clouds to HII galaxies, we obtained high resolution HI observations of five nearby HII galaxies. HII galaxies are low surface brightness, rich in HI, and contain one or a few high surface brightness knots whose optical spectra resemble those of HII regions. These knots are currently experiencing a burst of star formation. After Kennicutt (1989) we determine the critical density for star formation in the galaxies, and compare the predictions with radio and optical data.

Taylor, Christopher L.↗

NASA NTRS1994

Characteristics of the vertical profiles of dual-frequency, dual-polarization radar data in stratiform rain

Airborne dual-wavelength and dual-polarization radar data are analyzed for measurements taken in stratiform rain in the western Pacific during September 1990. The focus of the paper is on the vertical profiles of the linear depolarization ratio, LDR (10 GHz); the reflectivity factor, dBZ (10 GHz); and the dual-frequency ratio, DFR (10, 34.45 GHz). Statistical characterizations of the maxima of these quantities and the relative locations at which they occur suggest that the eccentricity of the melting particles is fairly large and that the shape and size of the particles are correlated. To try to explain these features, two types of simulation are presented. In the first, a set of measured drop size distributions is used in the context of a standard model of the melting layer. Variations in snow density, as well as shape, size, and orientation distributions are used to study the relationship between these parameters and the radar measurements. To reduce the amount of ambiguity in the estimation, a second type of simulation is described in which the size distribution of the snow is estimated. Comparisons between the simulated and measured profiles indicate that radar measurements can be used to derive certain characteristics of the particle size and shape distributions in the melting layer.

Meneghini, R.↗

NASA NTRS1998

Anion channels and the stimulation of anthocyanin accumulation by blue light in Arabidopsis seedlings

Activation of anion channels by blue light begins within seconds of irradiation in seedlings and is related to the ensuing growth inhibition. 5-Nitro-2-(3-phenylpropylamino)-benzoic acid (NPPB) is a potent, selective, and reversible blocker of these anion channels in Arabidopsis thaliana. Here we show that 20 microM NPPB blocked 72% of the blue-light-induced accumulation of anthocyanin pigments in seedlings. Feeding biosynthetic intermediates to wild-type and tt5 seedlings provided evidence that NPPB prevented blue light from up-regulating one or more steps between and including phenylalanine ammonia lyase and chalcone isomerase. NPPB was found to have no significant effect on the blue-light-induced increase in transcript levels of PAL1, CHS, CHI, or DFR, which are genes that encode anthocyanin-biosynthetic enzymes. Immunoblots revealed that NPPB also did not inhibit the accumulation of the chalcone synthase, chalcone isomerase, or flavanone-3-hydroxylase proteins. This is in contrast to the reduced anthocyanin accumulation displayed by a mutant lacking the HY4 blue-light receptor, as hy4 displayed reduced expression of the above enzymes. Taken together, the data indicate that blue light acting through HY4 leads to an increase in the amount of biosynthetic enzymes but blue light must also act through a separate, anion-channel-dependent system to create a fully functional biosynthetic pathway.

Non-NASA Center↗

NASA NTRS2004

On Study of Air/Space-borne Dual-Wavelength Radar for Estimates of Rain Profiles

In this study, a framework is discussed to apply air/space-borne dual-wavelength radar for the estimation of characteristic parameters of hydrometeors. The focus of our study is on the Global Precipitation Measurements (GPM) precipitation radar, a dual-wavelength radar that operates at Ku (13.8 GHz) and Ka (35 GHz) bands. As the droplet size distributions (DSD) of rain are expressed as the Gamma function, a procedure is described to derive the median volume diameter (D(sub 0)) and particle number concentration (N(sub T)) of rain. The correspondences of an important quantity of dual-wavelength radar, defined as deferential frequency ratio (DFR), to the D(sub 0) in the melting region are given as a function of the distance from the 0 C isotherm. A self-consistent iterative algorithm that shows a promising to account for rain attenuation of radar and infer the DSD without use of surface reference technique (SRT) is examined by applying it to the apparent radar reflectivity profiles simulated from the DSD model and then comparing the estimates with the model (true) results. For light to moderate rain the self-consistent rain profiling approach converges to unique and correct solutions only if the same shape factors of Gamma functions are used both to generate and retrieve the rain profiles, but does not converges to the true solutions if the DSD form is not chosen correctly. To further examine the dual-wavelength techniques, the self-consistent algorithm, along with forward and backward rain profiling algorithms, is then applied to the measurements taken from the 2nd generation Precipitation Radar (PR-2) built by Jet Propulsion Laboratory. It is found that rain profiles estimated from the forward and backward approaches are not sensitive to shape factor of DSD Gamma distribution, but the self-consistent method is.

Liao, Liang↗

NASA NTRS2019

Assessment of Ku- and Ka-Band Dual-Frequency Radar for Retrieval of Snow Properties

Current scattering look-up tables for snow assume a constant mass density along with a Gamma particle size distribution (PSD). The first assumption is tested against scattering parameters from simulated particle models generated by Dr. Kwo-Sen Kuo at GSFC and Dr. Guosheng Liu at FSU. Good agreement of the scattering parameters is found with the FSU results if the mass is taken to be the same as the mass of the simulated particle and the mass density is taken to be 0.2 g/cm cu. For the GSFC data base, good agreement is found if the mass density is taken to be between 0.1 and 0.2 g/cm cu. The second assumption of a Gamma PSD is tested against measured PSD's along with a m-d (mass-dimension) relationship. The degree of agreement depends on the value of, the 'shape' parameter in the Gamma distribution but to a lesser degree on the m-d relationship (of the three that were examined). A shortcoming of the simulated snow particle data bases is the lack of large particles. As a consequence, larger values of DFR (dual-frequency ratio) that are commonly seen in airborne and spaceborne measurements cannot be reproduced from the tables. This situation is expected to improve as scattering parameters from larger particles are included in the databases.

Liang Liao↗