Search NASA⌕ Search

SEARCH · Search NASA

Results for “DIELS-ALDER REACTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Pressure-Induced Diels-Alder Reactions in C 6 H 6 -C 6 F 6 Cocrystal towards Graphane Structure

Pressure-induced polymerization (PIP) of aromatics is a novel method to construct sp 3 -carbon frameworks, and nanothreads with diamond-like structures were synthesized by compressing benzene and its derivatives. Here, by compressing benzene-hexafluorobenzene cocrystal (CHCF), we identified H-F-substituted graphane with a layered structure in the PIP product. Based on the crystal structure determined from the in situ neutron diffraction and the intermediate products identified by the gas chromatography-mass spectrum, we found that at 20 GPa CHCF forms tilted columns with benzene and hexafluorobenzene stacked alternatively, which leads to a [4+2] polymer, and then transfers to short-range ordered hydrogenated-fluorinated graphane. The reaction process contains [4+2] Diels-Alder, retro-Diels-Alder, and 1-1' coupling, and the former is the key reaction in the PIP. In conclusion, our studies confirmed the elemental reactions of the CHCF for the first time, which provides a novel insight into the PIP of aromatics.

36 MATERIALS SCIENCE↗

Promoting Diels-Alder reactions to produce bio-BTX: Co-aromatization of textile waste and plastic waste over USY zeolite

Producing commodity aromatic hydrocarbons from textile waste is a promising approach to promote carbon neutrality and circular economy. Catalytic degradation of flax waste (FW) to generate furans and its subsequent Diels-Alder transformation to monocyclic aromatic hydrocarbons over USY zeolite were conducted. Experimental results indicated that USY catalyzed FW resulted in a 5.5-fold increase in furans production compared with the non-catalytic trial. The Si/Al molar ratio in USY played a determining role in furans formation, and a 5-fold increase was observed over USY with a Si/Al ratio of 5.3 as opposed to that with a Si/Al ratio of 11. Plastic waste, polyethylene (PE), co-fed with FW yielded 1.6 times higher aromatic hydrocarbons than polypropylene (PP). The selectivity to aromatic hydrocarbons reached 81.6% under 20% PE co-fed with 80% FW, in which benzene, toluene, and xylenes (BTX) were predominant products with the maximum selectivity of 68%. Furthermore, this study presents a cleaner approach for value-added resource recovery and sustainable management of textile and plastic waste.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Acid-catalyzed benzoylation reactions of Diels-Alder polyphenylenes

In this work, post-polymerization reactions of Diels-Alder polyphenylene with ring-substituted benzoyl chloride derivatives using triflic acid as the catalyst, effected selective Friedel-Crafts acylation of the lateral phenyl groups attached to the polyphenylene backbone. Using 4-(trifluoromethyl) benzoyl chloride gave a polymer with increased hydrophobicity. Using 4-fluorobenzoyl chloride afforded lateral 4-(fluorobenzoyl)phenyl substituents, which were further functionalized by nucleophilic aromatic substitution of the reactive fluoro substituent by 4-methoxyphenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermochemical Data for Furan-based Monomer Candidates for Frontal Ring-Opening Metathesis Polymerization (FROMP)

This dataset includes 471 furan-based monomer candidates for frontal ring-opening metathesis polymerization (FROMP) and relevant thermochemistry as calculated with density functional theory (DFT). The monomer candidates were combinatorically enumerated using Diels-Alder reactions of furan derivatives as dienes and four types of dienophiles (alkenes, alkynes, allenes, and benzynes). Common substituents were enumerated for the dienophile classes, and methyl substitution on the diene was explored. We used the SMILES arbitrary target specification (SMARTS) language to produce monomers and ring-opened structures from diene and dienophile precursor SMILES, and we studied the ring-opening reaction using a homodesmotic equation with ethene. RDKit conformers were initially generated from SMILES, then optimized with GFN2-xTB. The two conformers lowest in energy were then optimized with DFT using the wb97x-D3 functional, def2-TZVP basis set, and def2/J auxiliary basis set. Gibbs free energy corrections were obtained through frequency calculations. Structures with imaginary frequencies below -50 cm^{-1} were excluded from this work, and smaller imaginary modes were flipped to be positive for free energy calculations. Modes below 50 cm^{-1} were treated with the modified rigid rotor approximation, and all thermochemical values were calculated at T=200C. The CSV file contains the monomer SMILES, the free energy of reaction for Diels-Alder addition (G_DA_200), and the enthalpy of the ring-opening reaction (H_RO_200). All energies are given in kcal/mol. An interactive HTML is also included to visualize the monomers in this dataset.

Chua, Lauren↗

Fundamental Studies of Bifunctional Catalysts for Tandem Reactions

During the past few years of our funding from DOE Basic Energy Sciences, we have focused on the catalytic conversion of biomass-derived 5-hydroxymethyl furfural (HMF) as a platform molecule for sustainable synthesis of value-added chemicals. The combination of the diene and aldehyde functionalities in HMF enables catalytic production of acetalized HMF derivatives with diol or epoxy reactants to allow reversible synthesis of norcantharimide derivatives upon Diels-Alder reaction with maleimides. Whereas the electron-withdrawing nature of aldehyde group inhibits the reactivity of diene group in HMF to undergo Diels-Alder reactions with dienophiles, by converting the aldehyde group in HMF to an electron-donating hydroxyl group, HMF can append maleimide-based chemicals through Diels-Alder coupling. Acetalization of HMF not only produces an electron-rich diene for Diels-Alder reaction, but it also alters the reversibility of acetal formation and thereby allows for the controlled release of chemicals by hydrolysis. Therefore, we synthesized various norcantharimide derivatives from biomass-derived HMF by acetalization over an acid catalyst, Amberlyst-15, followed by Diels-Alder reaction with maleimide. The norcantharimides release the starting materials by retro Diels-Alder reaction that is triggered by acetal hydrolysis under acidic (≤pH 3) conditions. In subsequent work, we explored the synthesis and properties of functional polyurethanes and polyesters with tunable properties from biomass-derived (HMF)-Acetone-HMF (HAH) monomers. HAH can be selectively hydrogenated over Cu and Ru catalysts to produce partially-hydrogenated HAH (PHAH) and fully-hydrogenated HAH (FHAH). HAH contains functional groups, including hydroxyl, furan, enone, and ketone functionalities, that can be exploited to further tune the polymer properties. The π-electron conjugation between the enone and furan groups in HAH monomer stabilizes the furan group to prevent the uncontrolled degradation of furans during reactions, such as etherification. Therefore, HAH is a renewable monomer that can be used to synthesize polymers, having high molecular weight, symmetric functionalities, an inexpensive production price, and being derived from renewable resources without competition with food resources. We demonstrated the synthesis of functional polyurethanes and a renewable polyester from HAH-derived monomers, and 4,4’-methylenebis(phenyl isocyanate) (MDI). We showed that it is essential to be able to selective hydrogenate C=C double bonds in HAH to be able to achieve effective Diels Alder reactions of the furan ring. Therefore, we studied the hydrogenation at temperatures from 313 – 393 K of HAH over Pd, Ru, and Cu based catalysts. HAH was selectively hydrogenated to produce partially-hydrogenated monomers (PHAH) over Cu and Ru catalysts and to fully-hydrogenated HAH monomers (FHAH) over the Ru catalyst. Pd based catalysts yielded a mixture of partially and fully hydrogenated monomers. Reaction kinetics models were employed to quantify the kinetic behavior for hydrogenation over Ru, Cu, and Pd catalysts. A 5-step pathway exhibited over Pd and Ru catalysts consists of both series and parallel reaction steps, where HAH is both converted to fully hydrogenated products sequentially via series reactions of partially hydrogenated intermediates, as well as converted directly in parallel reactions to form the fully hydrogenated products. In contrast, a 3-step pathway over the Cu catalyst consists only of the consecutive reaction steps, where the final product was formed via series reactions of intermediate products. Additionally, reaction over the Cu catalyst did not hydrogenate the furan rings of the HAH molecule and yielded a different final product than those hydrogenation over Pd and Ru catalysts. Using the results from our detailed reaction kinetics studies, we developed universal conditions for the maximum production of the various hydrogenated products for both batch and plug flow systems. In subsequent work, we employed reaction schemes to optimize the yields of products from selective hydrogenations of HAH in isopropanol solvent and in the presence of liquid water. Reaction schemes consisting of 7, 9, and 11 steps were examined to describe the rates of formation of the observed products and reaction intermediates for hydrogenation of HAH over Ru and Pd catalysts, and a 3-step scheme was studied over Cu catalysts. Rate constants and activation energies were calculated using these reaction schemes, and we then apply these reaction schemes to explore the effects of water addition on the hydrogenation pathways. The effects of water addition to isopropanol (IPA) solvents on the hydrogenation of HAH were markedly different over Pd, Ru, and Cu catalysts. Over the Pd catalyst, the addition of water to IPA increased hydrogenation rates and promoted hydrogenation of furan rings. The addition of water to IPA yielded significant carbon losses over the Ru catalyst, and slowed hydrogenation steps over Cu, while significantly inhibiting hydrogenation of the ketone group. This behavior opened routes toward increased production rates of PHAH=O (a partially hydrogenated form of HAH containing a C=O bond), a product in which the diene groups of the furan rings were not hydrogenated. Addition of water also allowed increased feed concentrations of HAH that were previously not possible in pure IPA solvents.

09 BIOMASS FUELS↗

Chemical–Switching Strategy for Synthesis and Controlled Release of Norcantharimides from a Biomass–Derived Chemical

Catalytic strategies were developed to synthesize and release chemicals for applications in fine chemicals, such as drugs and polymers, from a biomass-derived chemical, 5-hydroxymethyl furfural (HMF). The combination of the diene and aldehyde functionalities in HMF enabled catalytic production of acetalized HMF derivatives with diol or epoxy reactants to allow reversible synthesis of norcantharimide derivatives upon Diels-Alder reaction with maleimides. Reverse-conversion of the acetal group to an aldehyde yielded mismatches of the molecular orbitals in norcantharimides to trigger retro Diels-Alder reaction at ambient temperatures and released reactants from the coupled molecules under acidic conditions. In conclusion, these strategies provide for the facile synthesis and controlled release of high-value chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Automatic Partition of Orbital Spaces Based on Singular Value Decomposition in the Context of Embedding Theories

Here, we present a simple approach for orbital space partitioning to be employed in the projection-based embedding theory developed by Goodpaster and co-workers [Manby et al. J. Chem. Theory Comput. 2012, 8, 2564]. Once the atoms are assigned to the desired subspaces, the molecular orbitals are projected onto the atomic orbitals centered on active atoms and then singular value decomposed. The right singular vectors are used to rotate the initial molecular orbitals, taking the largest gap in the singular values spectrum to define the most suitable partition of the occupied orbital space. This scheme is free from numerical parameters, contrary to the Mulliken charge threshold or the completeness criterion previously used. The performance of this new prescription is assessed in a test set of several distinct reactions, the deprotonation of decanoic acid, the Diels-Alder reaction of 1,3-butadiene and octadecanonaene, the torsional potential of a retinal derivative, and the critical points along the reaction coordinate of an instance of the Menshutkin S N2 reaction inside a carbon nanotube.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Molecules under Pressure with Gaussian Potentials

The computational modeling of molecules under high pressure is a growing research area that augments experimental high-pressure chemistry. Here, a new electronic structure method for modeling atoms and molecules under pressure, Gaussians On Surface Tesserae Simulate HYdrostatic Pressure (GOSTSHYP) approach, is introduced. In this method, a set of Gaussian potentials is distributed evenly on the van der Waals surface of the investigated chemical system, leading to a compression of the electron density and the atomic scaffold. Since no parameters other than pressure need to be specified, GOSTSHYP allows straightforward geometry optimizations and ab initio molecular dynamics simulations of chemical systems under pressure for nonexpert users. In this work, calculated energies, bond lengths, and dipole moments under pressure fall within the range of established computational methods for high-pressure chemistry. A Diels-Alder reaction and the cyclotrimerization of acetylene showcase the ability of GOSTSHYP to model pressure-induced chemical reactions. The connection to mechanochemistry is pointed out.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parallel replica dynamics simulations of reactions in shock compressed liquid benzene

The study of the long-term evolution of slow chemical reactions is challenging because quantum-based reactive molecular dynamics simulation times are typically limited to hundreds of picoseconds. In this work, the extended Lagrangian Born-Oppenheimer molecular dynamics formalism is used in conjunction with parallel replica dynamics to obtain an accurate tool to describe the long-term chemical dynamics of shock-compressed benzene. Langevin dynamics has been employed at different temperatures to calculate the first reaction times in liquid benzene at pressures and temperatures consistent with its unreacted Hugoniot. Our coupled engine runs for times on the order of nanoseconds (one to two orders of magnitude longer than traditional techniques) and is capable of detecting reactions that are characterized by rates significantly slower than we could study before. At lower pressures and temperatures, we mainly observe Diels-Alder metastable reactions, whereas at higher pressures and temperatures we observe stable polymerization reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Femtosecond dynamics and coherence of ionic retro-Diels–Alder reactions

Ultrafast tunnel ionization enables femtosecond time-resolved dynamic measurements of the retro-Diels–Alder reactions of positively charged cyclohexene, norbornene, and dicyclopentadiene. Unlike the reaction times of 500–600 ps that are observed following UV excitation of neutral species, on the ionic potential energy surfaces, these reactions occur on a single picosecond timescale and, in some cases, exhibit vibrational coherence. In the case of norbornene, a 270 cm –1 vibrational mode is found to modulate the retro-Diels–Alder reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enantioselective catalysts based on metal-organic framework-supported nucleotides

Adenosine triphosphate (ATP) and other nucleotides can be irreversibly bound to the metal-organic framework (MOF) MIL-101(Cr). Analysis of X-ray diffraction data suggests that the location of the adsorbed ATP molecule is in proximity of the Cr 3 clusters. Solid-state NMR and DFT calculations indicate that ATP is bound to MIL-101(Cr) through linkages of the terminal phosphate group with Cr(III) of the framework. In the presence of Cu(II) ions, the MOF-supported nucleotides can function as stable and reusable enantioselective heterogeneous catalysts for reactions like Diels-Alder and Michael addition. In conclusion, compared to the corresponding homogeneous nucleotide-based artificial metalloenzymes (ArMs), the MOF-supported nucleotide-based ArMs exhibit significantly enhanced activity and selectivity in certain cases, demonstrating their potential as a new class of enantioselective heterogeneous catalysts.

36 MATERIALS SCIENCE↗

Distance-Selected Topochemical Dehydro-Diels–Alder Reaction of 1,4-Diphenylbutadiyne toward Crystalline Graphitic Nanoribbons

Solid-state topochemical polymerization (SSTP) is a promising method to construct functional crystalline polymeric mate-rials, but contrast to various reactions happened in solution, only very limited types of SSTP reactions are reported. Diels-Alder (DA) and dehydro-DA (DDA) reaction are textbook reactions for preparing six-membered rings in solution, but scarcely seen in solid-state synthesis. Here, using multiple cutting-edge techniques, we demonstrate that the solid 1,4-diphenylbutadiyne (DPB) undergoes a DDA reaction under 10-20 GPa with the phenyl as the dienophile. The crystal structure at the critical pressure shows this reaction is “distance selected”. The distance of 3.2 Å between the phenyl and the phenylethynyl facilitates the DDA reaction, while the distances for other DDA and 1, 4-addition reactions are too large to allow the bonding. The obtained products are crystalline armchair graphitic nanoribbons, and hence our studies open a new route to construct the crystalline carbon materials with atomic-scale control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Remote-Contact Catalysis for Target-Diameter Semiconducting Carbon Nanotube Arrays

Electrostatic catalysis has been an exciting development in chemical synthesis (beyond enzymes catalysis1 ) in recent years, boosting reaction rates and selectively producing certain reaction products2 . Most of the studies to date have been focused on using external electric field (EEF) to rearrange the charge distribution in small molecule reactions such as Diels-Alder addition3 , carbene reaction4 , etc. However, in order for these EEFs to be effective, a field on the order of 1 V/nm (10 MV/cm) is required, and the direction of the EEF has to be aligned with the reaction axis5 . Such a large and oriented EEF will be challenging for large-scale implementation, or materials growth with multiple reaction axis or steps. Here, we demonstrate that the energy band at the tip of an individual single-walled carbon nanotube6 (SWCNT) can be spontaneously shifted in a high-permittivity growth environment, with its other end in contact with a low-work function electrode (e.g., hafnium carbide or titanium carbide7 ). By adjusting the Fermi level at a point where there is a substantial disparity in the density of states (DOS) between semiconducting (s-) and metallic (m-) SWCNTs8 , we achieve effective electrostatic catalysis for s-SWCNT growth assisted by a weak EEF perturbation (200V/cm). This approach enables the production of high-purity (99.92%) s-SWCNT horizontal arrays with narrow diameter distribution (0.95±0.04 nm), targeting the requirement of advanced SWCNT-based electronics for future computing9-11. These findings highlight the potential of electrostatic catalysis in precise materials growth, especially for s-SWCNTs, and pave the way for the development of advanced SWCNT-based electronics12.

Wang, Jiangtao↗

Understanding and promoting the reaction kinetics of photothermally driven Diels–Alder reaction with minimized side reactions

The thermoreversible Diels–Alder (DA) reaction involving furan and maleimide precursors has been extensively exploited to develop reversible thermosets for circular economy and additive manufacturing. Recently, applications of photothermal nanoparticles, which can absorb light and generate nanoscale heat, have gained significant attention in driving the Diels–Alder (DA) reaction more efficiently. This approach can be utilized by various applications, for example, solar light-enhanced recycling, self-healing at targeted area, and photothermal 3-D printing. Here, in this work, we address an important fundamental question on the photothermal approach: how does the reaction kinetics of the photothermally driven DA reaction compared to that of the conventional heat driven one? We found that the forward DA reaction kinetics varies dramatically depending on a type of heat sources, i.e., light-induced photothermal heat or conventional heat, despite of a similar bulk temperature. We observed that the light-induced photothermal heat significantly enhances the DA reaction rate in comparison to the bulk heating in an inert environment. On the contrary, the photothermally driven forward DA reaction is significantly slower than that of the heat driven reaction in the presence of oxygen. This is attributed to the photoexcited electrons in photothermal nanoparticles that can generate singlet oxygen ( 1 O 2 ) in the presence of visible light. This singlet oxygen may facilitate an endoperoxide side reaction on the furan group, ultimately, retard the DA reaction from the furan group. These results reveal the effectiveness of photothermal nanoparticles in accelerating DA reaction while underscoring the need to minimize oxygen exposure to prevent unfavorable side reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphorus-containing solid catalysts and reactions catalyzed thereby, including synthesis of p-xylene

Methods and phosphorus-containing solid catalysts for catalyzing dehydration of cyclic ethers (e.g., furans, such as 2,5-dimethylfuran) and alcohols (e.g., ethanol and isopropanol). The alcohols and cyclic ethers may be derived from biomass. One example includes a tandem Diels-Alder cycloaddition and dehydration of biomass-derived 2,5-dimethyl-furan and ethylene to renewable p-xylene. The phosphorus-containing solid catalysts are also active and selective for dehydration of alcohols to alkenes.

Cho, Hong Je↗

Biphenyl dicarboxylates from ethene and bifuran dimethyl esters

The substrate scope of the Diels-Alder-Dehydration reaction was expanded to the deactivated bifuran structure. Dimethyl biphenyl-4,4'-dicarboxylate (1) and methyl 5- [4-(methoxycarbonyl)phenyl]-2-furoate (2) were synthesized from dimethyl 2,2'-bifuran-5,5'-dicarboxylate (3) via metal-triflate-catalyzed Diels-Alder-Dehydration reaction with ethene. A 31% yield of (1) was obtained using Sc(OTf)3 catalyst, and a 76.6% yield of (2) was obtained using La(OTf)3 catalyst under moderate reaction conditions. This approach is inherently selective to the 4,4'-dicarboxylates, and bypasses the methyl-group oxidation step of the dimethyl-biphenyl route.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Diels–Alder reactions for thermochemical storage and heat transfer fluids identified using density functional theory

Thermal storage and transfer fluids have important applications in industrial, transportation, and domestic settings. Current thermal fluids have relatively low specific heats, often significantly below that of water. However, by introducing a thermochemical reaction to a base fluid, it is possible to enhance the fluid's thermal properties. Here, density functional theory (DFT) is used to screen Diels–Alder reactions for use in aqueous thermal fluids. From an initial set of 52 reactions, four are identified with moderate aqueous solubility and predicted turning temperature near the liquid region of water. These reactions are selectively modified through 60 total functional group substitutions to produce novel reactions with improved solubility and thermal properties. Among the reactions generated by functional group substitution, seven have promising predicted thermal properties, significantly improving specific heat (by as much as 30.5%) and energy storage density (by as much as 4.9%) compared to pure water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗