Search NASA⌕ Search

SEARCH · Search NASA

Results for “DWT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

DWT-Based Aggregated Load Modeling and Evaluation for Quasi-Static Time-Series Simulation on Distribution Feeders

This paper presents an extension of a previously reported discrete wavelet transform (DWT) based load modeling methodology which targets at modeling time-series load profiles to enable the more effective and realistic quasi-static time-series simulation of distribution feeders. The time-series load model is composed of two major parts: 1) The low-resolution field-measured load data which usually have a resolution of 30 or 15 min., 2) The high-resolution load variability model data extracted from the established variability database which can have resolution up to 1 sec. A load aggregation methodology is developed to aggregate the load profiles so that load profiles at different transformer ratings can be effectively modeled. Validation, evaluation, and analysis of the developed load modeling approach has been performed on the IEEE-123 feeder and an actual utility feeder from California. The analysis completed on the two feeders have demonstrated the effectiveness and revealed the value of the developed model for distribution feeder quasi-static time-series simulation at high temporal resolution.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Ocean Vessel 30K DWT Construction

Steel requirements for the construction of an ocean vessel with a cargo capacity of 30,000 DWT. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=1ABED010-2E2B-4D19-B369-BA6201981959

42 ENGINEERING↗

DWT-Based Aggregated Load Modeling and Evaluation for Quasi-Static Time-Series Simulation on Distribution Feeders: Preprint

This paper presents an extension of a previously reported discrete wavelet transform (DWT) based load modeling methodology which targets at modeling time-series load profiles to enable the more effective and realistic quasi-static time-series simulation of distribution feeders. The time-series load model is composed of two major parts: 1) The low-resolution field-measured load data which usually have a resolution of 30 or 15 min., 2) The high-resolution load variability model data extracted from the established variability database which can have resolution up to 1 sec. A load aggregation methodology is developed to aggregate the load profiles so that load profiles at different transformer ratings can be effectively modeled. Validation, evaluation, and analysis of the developed load modeling approach has been performed on the IEEE-123 feeder and an actual utility feeder from California. The analysis completed on the two feeders have demonstrated the effectiveness and revealed the value of the developed model for distribution feeder quasi-static time-series simulation at high temporal resolution.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Automated Framework for Groundwater Monitoring Using DWT with LSTM and Transformers

Environmental monitoring is critical for safeguarding public health and ecological well-being. Traditional data structuring and workflow monitoring methods consume significant time and effort, hindering timely insights and effective decision-making. Our study addresses this challenge by presenting an AI framework that automates data cleaning, structuring, and modeling processes, specifically targeting applications in groundwater monitoring. By leveraging automation for data processing and model training, our framework establishes a novel and efficient paradigm for environmental monitoring, with its potential application to the vast network of over a hundred Department of Energy Environmental Management (DoE-EM) cleanup sites across the country. It analyzes data streams from a network of groundwater Internet-of-Things (IoT) sensors deployed at the Savannah River Site (SRS) for prediction modeling. This allows human experts to focus on analysis and decision-making, ultimately leading to better environmental outcomes.The framework employs multivariate time-series forecasting methods to study and model the behavior of varying chemical analytes. The continuous learning process is enabled by utilizing deep learning techniques. It allows the framework to become more nuanced in its analysis over time, adapting to the specific characteristics of the environmental site and the evolving nature of contaminant behavior. Deep learning models known for sequence modeling, LSTM, and Transformers are employed for time series forecasting. Data processing and structuring are essential components significantly impacting the final model's performance. This hypothesis was proven by presenting a comparative analysis of model performance with processed and unprocessed data. The feature engineering approach utilized was the Discrete Wavelet Transform, which works well with time series data.

Discrete Wavelet Transform (DWT)↗

Current and Past DWT Policy (Presentation)

ARRA repeals individual dollar caps written into the small wind ITC provision in the Emergency Economic Stabilization Act of 2008. Eligible homeowners and businesses now allowed to claim full 30% ITC for qualified small wind energy property. Even amid a recession, this tax credit 'is going to blow the top off the market' - Ron Stimmel of AWEA. AWEA predicts the federal subsidy could help small turbine market grow by 40-50% annually, a boost that would parallel the growth of the U.S. solar photovoltaic industry after a similar 2005 initiative.

17 WIND ENERGY↗

Some notes on the application of discrete wavelet transform in image processing

Mathematical transforms are used in signal processing in order to extract what is known as 'hidden' information. One of these mathematical tools is the Discrete Wavelet Transform (DWT), which has been increasingly employed in non-destructive testing and, more specifically, in image processing. The main concern in the present work is to employ DWT to suppress noise without losing relevant image features. However, some aspects must be taken into consideration when applying DWT in image processing, mainly in the case of weld radiographs, in order to achieve consistent results. Three topics were selected as representative of these difficulties, as follows: 1) How can image matrix be filled to fit the 2{sup n} lines and 2{sup n} rows requirement? 2) How can the most suitable decomposition level of the DWT function and the correct choice of their coefficient suppression be selected? 3) Is there any influence of the scanning direction and the weld radiograph image, e.g., longitudinal or transversal, on the final processing image? It is known that some artifacts may be present in weld radiograph images. Indeed, the weld surface is frequently rough and rippled, what can be seen as gray level variation on the radiograph, being sometimes mistaken as defective areas. Depending on the position of these artifacts, longitudinal or transversal to the weld bead, they may have different influences on the image processing procedure. This influence is clearly seen in the distribution of the DWT Function coefficients. In the present work, examples of two weld radiographs of quite different image quality were given in order to exemplify it.

07 ISOTOPE AND RADIATION SOURCES↗

Preparation and Testing of Sorbents Mixed with an Oxidizing Chemical

This procedure outlines the requirements and steps to perform an evaluation of the relative oxidizing hazard of sorbents amalgamated with potassium nitrite. This testing is based on a modified version of Test Method for Oxidizing Solids (SW-846 Method 1040) outlined in Test Plan for Preparation and Testing of Sorbents Mixed with an Oxidizing Chemical (DWT-TP-002). This work is a continuation of Preparation and Testing of Sorbents Mixed with Oxidizer Found in Transuranic Waste (DWT-TST-001) test plan that was written to provide results to inform the Department of Energy (DOE) Carlsbad Field Office (CBFO) Basis of Knowledge. Documentation of the fastest-burning oxidizer, potassium nitrite, was determined in Oxidizer Scoping Studies (DWT-RPT-001), and the use of Quik Solid as the fastest-burning engineered organic polymer was documented in Sorbent Scoping Studies (DWT-RPT-002).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical Water Treatment for Cooling Towers

Cooling towers are an integral component of many refrigeration systems, providing comfort or process cooling across a broad range of applications. They are the point in the system where heat is dissipated to the atmosphere through the evaporative cooling process. Cooling towers are commonly found in industrial applications and are also commonly applied to water cooled chilled water plants in medium to large commercial buildings. Cooling towers used in medium to large commercial buildings are the focus of this paper. Cooling towers consume a large amount of water. Cooling tower related water consumption is one of largest potable water loads within buildings in the United States, with over 26% of water use associated with heating and cooling. Reducing water consumption is a priority for the General Services Administration (GSA) due to Executive Order 13514, Energy Policy Act of 1992, and regional water shortage concerns. These factors have brought about the investigation of cost effective opportunities to reduce water use, such as alternative water treatment (AWT) technologies for cooling towers. Traditional water treatment approaches rely on chemicals to extend the ability of the water to hold scaling minerals in suspension, minimize corrosion, and prevent biological growth. This treatment protects the chillers and cooling tower equipment, however even when chemicals are used regularly, a certain percentage of condenser water must be blown down and made up with fresh water to maintain system water quality parameters. In addition, the use of chemicals sometimes creates a waste issue and can cause building owners to incur additional fees such as disposal or sewer charges. The current state of water treatment in GSA buildings is to contract for a fixed fee with a company specializing in a conventional chemical maintenance. There are many vendors of AWT systems. This project assesses the effectiveness of one technology provided by Dynamic Water Technologies (DWT). This project assesses the effectiveness of DWT for lowering GSA operating costs while maintaining proper water treatment. The application of the DWT technology in place of traditional chemical water treatment has the anticipated benefits of: - Saving water and water/sewer costs by reducing the amount of blowdown required due to being able to remove scale causing minerals that allows the system to operate at a higher cycles of concentration - Eliminating the need for water treatment chemicals for scale, corrosion, and biological growth - Increasing chiller efficiency by preventing scaling and removing some of the existing scale, which improves heat transfer - Maintaining very low corrosion rates. The technology was installed at the Juliette Gordon Low Federal Building located in Savannah, Georgia. The building has two cooling towers utilizing traditional chemical water treatment for the cooling water circulating through the two chiller condensers. Measurement at the site includes the flow of makeup water to the cooling towers and the blowdown flow rate from the cooling tower basins. Additionally, energy measurements include the electrical energy from the chillers, chiller water pumps, condenser water pumps, cooling tower fans and the energy used by the DWT skid and slip stream pump.

15 GEOTHERMAL ENERGY↗

Engineered plants for the production of the antioxidants arbutin and gallate

The shikimate pathway is a crucial metabolic route for the biosynthesis of numerous valuable chemicals. In this study, we engineered the shikimate pathway in plants via expression of microbial enzymes to produce the two important antioxidants gallate and arbutin. The engineered pathways utilize the aromatics protocatechuate and 4-hydroxybenzoate as metabolic intermediates. Through transient expression in Nicotiana benthamiana leaves, we first identified biosynthetic routes for the production of gallate from either chorismate or 3-dehydroshikimate. Gallate production was then achieved in Arabidopsis using a genetic background that overproduces protocatechuate and via expression of a mutated version of the 4-hydroxybenzoate hydroxylase PobA from Pseudomonas sp. Arbutin production was obtained in Arabidopsis using a genetic background that overproduces 4-hydroxybenzoate and via expression of the monooxygenase MNX1 from Candida parapsilosis. The best Arabidopsis transgenic lines accumulated gallate and arbutin in the range of 0.25 and 0.93 dry weight % (dwt%), respectively. Using sorghum for large-scale in planta production, the titers of gallate and arbutin produced from the intermediate 4-hydroxybenzoate reached 0.58 dwt% and 0.50 dwt%, respectively, in mature transgenic plants, surpassing levels typically observed in plants that naturally produce these compounds. Gallate and arbutin were readily extracted from plant tissues using methanol solvent. Analysis of extractive-free biomass showed only trace amounts of gallate and its precursors 4-hydroxybenzoate and protocatechuate crosslinked to cell walls, suggesting that they mainly occur as soluble conjugated forms stored in the vacuole. This study presents alternative synthesis routes using plant hosts for the eco-friendly production of gallate and arbutin.

Antioxidant↗

Shear flow and drift wave turbulence dynamics in a cylindrical plasma device

The experimental observations of the dynamics of the coupled drift wave turbulence (DWT)/sheared zonal flow (ZF) system in a cylindrical plasma device using a combination of Langmuir probe and fast-framing imaging measurements are reported. The results show the presence of an azimuthal ZF that exhibits low frequency (approx250 Hz) fluctuations. The envelope of the higher frequency (above 5 kHz) floating potential fluctuations associated with the DWT, the density gradient, and the turbulent radial particle flux are all modulated out of phase with the strength of the ZF. The divergence of the turbulent Reynolds stress is also modulated at the same slow time scale in a phase-coherent manner consistent with a turbulent-driven shear flow sustained against the collisional and viscous damping. The radial turbulence correlation length and cross-field particle transport are reduced during periods of strong flow shear. The results are qualitatively consistent with theoretical expectations for coupled DWT-ZF dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Accumulation of high-value bioproducts in planta can improve the economics of advanced biofuels

Coproduction of high-value bioproducts at biorefineries is a key factor in making biofuels more cost-competitive. One strategy for generating coproducts is to directly engineer bioenergy crops to accumulate bioproducts in planta that can be fractionated and recovered at biorefineries. Here, we develop quantitative insights into the relationship between bioproduct market value and target accumulation rates by investigating a set of industrially relevant compounds already extracted from plant sources with a wide range of market prices and applications, including <$10/kg (limonene, latex, and polyhydroxybutyrate [PHB]), $10 to $100/kg (cannabidiol), and >$100/kg (artemisinin). These compounds are used to identify a range of mass fraction thresholds required to achieve net economic benefits for biorefineries and the additional amounts needed to reach a target $2.50/gal biofuel selling price, using cellulosic ethanol production as a test case. Bioproduct market prices and recovery costs determine the accumulation threshold; we find that moderate- to high-value compounds (i.e., cannabidiol and artemisinin) offer net economic benefits at accumulation rates of just 0.01% dry weight (dwt) to 0.02 dwt%. Lower-value compounds, including limonene, latex, and PHB, require at least an order-of-magnitude greater accumulation to overcome additional extraction and recovery costs (0.3 to 1.2 dwt%). We also find that a diversified approach is critical. For example, global artemisinin demand could be met with fewer than 10 biorefineries, while global demand for latex is equivalent to nearly 180 facilities. Our results provide a roadmap for future plant metabolic engineering efforts aimed at increasing the value derived from bioenergy crops.

09 BIOMASS FUELS↗

Comparing in planta accumulation with microbial routes to set targets for a cost-competitive bioeconomy

Plants and microbes share common metabolic pathways for producing a range of bioproducts that are potentially foundational to the future bioeconomy. However, in planta accumulation and microbial production of bioproducts have never been systematically compared on an economic basis to identify optimal routes of production. A detailed technoeconomic analysis of four exemplar compounds (4-hydroxybenzoic acid [4-HBA], catechol, muconic acid, and 2-pyrone-4,6-dicarboxylic acid [PDC]) is conducted with the highest reported yields and accumulation rates to identify economically advantaged platforms and breakeven targets for plants and microbes. The results indicate that in planta mass accumulation ranging from 0.1 to 0.3 dry weight % (dwt%) can achieve costs comparable to microbial routes operating at 40 to 55% of maximum theoretical yields. These yields and accumulation rates are sufficient to be cost competitive if the products are sold at market prices consistent with specialty chemicals ($20 to $50/kg). Prices consistent with commodity chemicals will require an order-of-magnitude-greater accumulation rate for plants and/or yields nearing theoretical maxima for microbial production platforms. This comparative analysis revealed that the demonstrated accumulation rates of 4-HBA (3.2 dwt%) and PDC (3.0 dwt%) in engineered plants vastly outperform microbial routes, even if microbial platforms were to reach theoretical maximum yields. Their recovery and sale as part of a lignocellulosic biorefinery could enable biofuel prices to be competitive with petroleum. Muconic acid and catechol, in contrast, are currently more attractive when produced microbially using a sugar feedstock. Ultimately, both platforms can play an important role in replacing fossil-derived products.

59 BASIC BIOLOGICAL SCIENCES↗

Empirical Mode Decomposition Technique with Conditional Mutual Information for Denoising Operational Sensor Data

A new approach is developed for denoising signals using the Empirical Mode Decomposition (EMD) technique and the Information-theoretic method. The EMD technique is applied to decompose a noisy sensor signal into the so-called intrinsic mode functions (IMFs). These functions are of the same length and in the same time domain as the original signal. Therefore, the EMD technique preserves varying frequency in time. Assuming the given signal is corrupted by high-frequency Gaussian noise implies that most of the noise should be captured by the first few modes. Therefore, our proposition is to separate the modes into high-frequency and low-frequency groups. We applied an information-theoretic method, namely mutual information, to determine the cut-off for separating the modes. A denoising procedure is applied only to the high-frequency group using a shrinkage approach. Upon denoising, this group is combined with the original low-frequency group to obtain the overall denoised signal. We illustrate our approach with simulated and real-world data sets. The results are compared to two popular denoising techniques in the literature, namely discrete Fourier transform (DFT) and discrete wavelet transform (DWT). We found that our approach performs better than DWT and DFT in most cases, and comparatively to DWT in some cases in terms of: (i) mean square error, (ii) recomputed signal-to-noise ratio, and (iii) visual quality of the denoised signals.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Feasibility of wavelet expansion methods to treat the energy variable

This paper discusses the use of the Discrete Wavelet Transform (DWT) to implement a functional expansion of the energy variable in neutron transport. The motivation of the work is to investigate the possibility of adapting the expansion level of the neutron flux in a material region to the complexity of the cross section in that region. If such an adaptive treatment is possible, 'simple' material regions (e.g., moderator regions) require little effort, while a detailed treatment is used for 'complex' regions (e.g., fuel regions). Our investigations show that in fact adaptivity cannot be achieved. The most fundamental reason is that in a multi-region system, the energy dependence of the cross section in a material region does not imply that the neutron flux in that region has a similar energy dependence. If it is chosen to sacrifice adaptivity, then the DWT method can be very accurate, but the complexity of such a method is higher than that of an equivalent hyper-fine group calculation. The conclusion is thus that, unfortunately, the DWT approach is not very practical. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Feasibility of a wavelet expansion method to treat energy in cell calculations

This paper discusses the application of the Discrete Wavelet Transform (DWT) for the functional expansion of the energy variable in a cell calculation. The motivation of the work is the desire to obtain a self-shielding methodology in which the treatment of the energy variable in a given material region can be automatically adapted to the complexity of the cross section in that region. Unfortunately, the work presented in this paper shows that it is generally not possible to obtain the desired adaptivity. The most fundamental reason is that in a multi-region system, the energy dependence of the flux in a given material region is a function of the energy dependent cross sections and sources in all material regions through which the neutrons have crossed before entering into the present material. The complexity of the energy dependence of the cross section in a material region is thus not necessarily linked to the energy dependence of the flux in that region. If one sacrifices the objective of adaptivity, then an accurate method can be obtained using the DWT as a functional expansion. However, the resulting system of equations is more complicated than the direct solution of a hyper-fine group calculation. The conclusion is thus that the DWT approach is not very practical. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Potential Economic Cost of Ecosystem Restoration in EAA

Everglades Agricultural Area (EAA) has been converted from its natural state to intensively managed agriculture and is one of the most productive agricultural regions in US, with sugarcane being the dominant crop. However, under the Comprehensive Everglades Restoration Plan (CERP), pumping is limited and some major drainage canals will be removed for retaining more water under the surface as part of the ecosystem restoration program. Thus, the sugarcane farmers might face higher water tables and longer flood durations, which would lead to a sugarcane production reduction. The purpose of this paper is to estimate the potential net return loss of sugarcane production due to the increasing water storage for EAA ecosystem restoration. Two scenarios of water table managements are studied and compared. In scenario one, the depth of water table is decreasing with the soil subsidence as the water table is kept fixed. In 30 years, the DWT is halved and also the annual sugar yield will be decreased from 37.92 tons/acre to 29.91 tons/acre. At the same time, the annual net return for the farmer is sharply decreased from $290.09 per acre of production to $93.75 per acre of production, and the present value of net return decreased from $290.09/acre to $51.76/acre. However, the water storage will be kept at an annual rate of 0.23 per acre-foot. In scenario two, the annual sugarcane yield is kept constant across 30 years as the depth of water table will be monitored to be the same for each year. Therefore, the net return for the farmer is not changing across the 30 years and it will only be discounted by the interest rate in order to get its present value. However, with the subsidence of soil, the water table is becoming lower and lower (as the DWT is constant). There is less and less space for water storage and the rate of water retention has declined from 0.23 foot-acre to 0.04 foot-acre.

54 ENVIRONMENTAL SCIENCES↗

Analysis of Mold Friction in a Continuous Casting Using Wavelet Transform

Mold friction (MDF) is an important parameter reflecting the lubrication condition between the initial shell and the mold during continuous casting. In this article, based on practical MDF from the slab continuous casting driven by a mechanical vibration device, the characteristics of friction were analyzed by continuous wavelet transform (CWT) and discrete wavelet transform (DWT) in different casting conditions, such as normal casting, level fluctuation, and alarming of the temperature measurement system. The results show that the CWT of friction accurately captures the subtle changes in friction force, such as the periodic characteristic of MDF during normal casting and the disordered feature of MDF during level fluctuation. Most important, the results capture the occurrence of abnormal casting and display the friction frequency characteristics at this abnormal time. In addition, in this article, there are some abnormal casting conditions, and the friction signal is stable until there is a sudden large change when abnormal casting, such as split breakout and submerged entry nozzle breakage, occurs. The DWT has a good ability to capture the friction characteristics for such abnormal situations. In particular, the potential abnormal features of MDF were presented in advance, which provides strong support for identifying abnormal casting and even preventing abnormal casting.

42 ENGINEERING↗

The influence of mineralogical, chemical and physical properties on grindability of commercial clinkers with high MgO level

This research investigates various methods able to identify possible mineralogical, physical and chemical influences on the grindability of commercial clinkers with high MgO level. The aim of the study is to evaluate the hardness and elastic modulus of the clinker mineral phases and their fracture strength during the comminution processes, comparing samples from clinkers with low MgO level (0.5%) and clinkers with elevated MgO levels (> 5.0%). The study of the influence of mineralogical, chemical and physical properties was carried out using several analytical techniques, such as: optical microscopy, X-ray diffraction with Rietveld refinement (XRD) and X-ray fluorescence (XRF). These techniques were useful in qualifying the different clinker samples. The drop weight test (DWT) and the Bond ball mill grindability test were performed to characterize the mechanical properties of clinkers. Nanoindentation tests were also carried out. Results from the Bond ball mill grindability test were found to be related to the hardness of the mineral phase and to mineralogical characteristics, such as type and amount of inclusions in silicates, belite and alite crystals shape, or microcracked alites. In contrast, the results obtained by the DWT were associated to the macro characteristics of clinkers, such as porosity, as well as to the hardness and mineralogical characteristics of belite crystals in clusters. Hardness instrumented tests helped to determine the Vickers hardness and elastic modulus from the mineral phases in commercial clinkers and produced different values for the pure phases compared to previous publications.

36 MATERIALS SCIENCE↗