Search NASA⌕ Search

SEARCH · Search NASA

Results for “DYSPROSIUM FLUORIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Predictive model for ionic liquid extraction solvents for rare earth elements

The purpose of our study was to select the most effective ionic liquid extraction solvents for dysprosium (III) fluoride using a theoretical approach. Conductor-like Screening Model for Real Solvents (COSMO-RS), based on quantum chemistry and the statistical thermodynamics of predefined DyF{sub 3}-ionic liquid systems, was applied to reach the target. Chemical potentials of the salt were predicted in 4,400 different ionic liquids. On the base of these predictions set of ionic liquids’ ions, manifesting significant decrease of the chemical potentials, were selected. Considering the calculated physicochemical properties (hydrophobicity, viscosity) of the ionic liquids containing these specific ions, the most effective extraction solvents for liquid-liquid extraction of DyF{sub 3} were proposed. The obtained results indicate that the COSMO-RS approach can be applied to quickly screen the affinity of any rare earth element for a large number of ionic liquid systems, before extensive experimental tests.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Manufacturing of Dysprosium-Iron Alloys by Electrolysis in Fluoride-Based Electrolytes: Oxide Solubility Determinations

Electrolytic production of light rare earth elements and alloys takes place in a fluoride-based electrolyte using rare earth oxides as raw material. The optimization of this method, mainly in terms of the energy efficiency and environmental impact control, is rather challenging. Anode effects, evolution of fluorine-containing compounds, and side cathode reactions could largely be minimized by a good control of the amount of rare earth oxide species dissolved in the fluoride-based electrolyte and their dissolution rate. The oxide content of the fluoride melts REF{sub 3}-LiF (RE = Nd, Dy) at different compositions and temperatures were experimentally determined by carbothermal analysis of melt samples. The highest solubility values of oxide species, added as Dy{sub 2}O{sub 3} and Dy{sub 2}(CO{sub 3}){sub 3}, were obtained to be of ca. 3 wt pct (expressed as Dy{sub 2}O{sub 3}) in the case of the equimolar DyF{sub 3}-LiF melt at 1323 K (1050 °C). The oxide saturation values increased with the amount of REF{sub 3} present in the molten bath and the working temperature.

36 MATERIALS SCIENCE↗

Fluoride-added Pr-Fe-B die-upset magnets with increased electrical resistivity

This work reports the effect of NdF{sub 3}, DyF{sub 3}, and CaF{sub 2} additions on the electrical resistivity and magnetic properties of Pr-Fe-B hot-pressed and die-upset permanent magnets. Composite magnets were synthesized from ground Pr{sub 14.5}Fe{sub 79.5}B{sub 6} melt-spun ribbons blended with 5 wt % of fluoride fine powders and consolidated by hot pressing at 650 deg. C, followed by die upsetting at 800 deg. C. While CaF{sub 2} is stable at the processing temperatures, the rare earth atoms separate from their fluorides to a certain degree with the assistance of the Pr-rich phase from the magnet matrix. Addition of fluorides increased the resistivity of the hot-pressed specimens by more than 200%. The resistivity of the die-upset specimens measured perpendicularly to the direction of the applied pressure, which is also the direction of magnetization, is, however, only slightly increased compared to the magnet counterparts without the fluoride addition. The intrinsic coercivity of Pr{sub 14.5}Fe{sub 79.5}B{sub 6} die-upset specimens is increased from 14.5 kOe to 15.3, 17.1, and 17.7 kOe for the addition of CaF{sub 2}, DyF{sub 3}, and NdF{sub 3}, respectively, at a slight expense of the residual flux.

36 MATERIALS SCIENCE↗

Electrochemical Behavior of Lanthanum in Molten LiF-NaF-KF 'Flinak' Eutectic Salt

In order to develop the Fluoride High- Temperature Reactor, an emerging Gen-IV reactor concept, a primary coolant cleanup system must be developed to allow online reprocessing of the primary molten fluoride salt. This research is focused on the determination of electrochemical properties of rare earths (REs) in molten fluoride salt related to the FHR. The FHR utilizes two fluoride salts. These fluoride salts are LiF-NaF-KF (46.5-11.5-42 mol%), melting point 454 deg. C, also known as 'Flinak', and LiFBeF{sub 2} (33-67 mol%), melting point 459 deg. C, also known as 'Flibe'. Flibe is selected as the primary coolant salt due to its low neutron cross-section (Li{sup 7}-enriched), superior heat transfer properties, and low melting point. However, due to the beryllium content in Flibe, it is highly toxic to humans and Flinak is preferred for the secondary and tertiary coolant salts. The work presented here is specifically focused on the behavior of lanthanum trifluoride (LaF{sub 3}) in molten Flinak. Furthermore, updated data and analysis regarding the electrochemical behavior of dysprosium trifluoride (DyF{sub 3}) is also presented. Previous work related to this topic was presented at the 2016 ANS winter conference. The goal of this research is to develop a contaminant cleanup system for the primary loop of the FHR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Electronic spectra of DyF studied by four-component relativistic configuration interaction methods

The electronic states of the DyF molecule below 3.0 eV are studied using 4-component relativistic CI methods. Spinors generated by the average-of-configuration Hartree-Fock method with the Dirac-Coulomb Hamiltonian were used in CI calculations by the KRCI (Kramers-restricted configuration interaction) program. The CI reference space was generated by distributing 11 electrons among the 11 Kramers pairs composed mainly of Dy [4f], [6s], [6p] atomic spinors, and double excitations are allowed from this space to the virtual molecular spinors. The CI calculations indicate that the ground state has the dominant configuration (4f{sup 9})(6s{sup 2})(Ω = 7.5). Above this ground state, 4 low-lying excited states (Ω = 8.5, 7.5, 7.5, 7.5) are found with dominant configurations (4f{sup 10})(6s). These results are consistent with the experimental studies of McCarthy et al. Above these 5 states, 2 states were observed at T{sub 0} = 2.39 eV, 2.52 eV by McCarthy et al. and were named as [19.3]8.5 and [20.3]8.5. McCarthy et al. proposed that both states have dominant configurations (4f{sup 9})(6s)(6p), but these configurations are not consistent with the large R{sub e}’s (∼3.9 a.u.) estimated from the observed rotational constants. The present CI calculations provide near-degenerate states of (4f{sup 10})(6p{sub 3/2,1/2}), (4f{sup 10})(6p{sub 3/2,3/2}), and (4f{sup 9})(6s)(6p{sub 3/2,1/2}) at around 3 eV. The former two states have larger R{sub e} (3.88 a.u.) than the third, so that it is reasonable to assign (4f{sup 10})(6p{sub 3/2,1/2}) to [19.3]8.5 and (4f{sup 10})(6p{sub 3/2,3/2}) to [20.3]8.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of CaF{sub 2}:Dy nanophosphor for dosimetric application

In this work, nanoparticles (NPs) of dysprosium doped calcium fluoride (CaF{sub 2}:Dy) 1 mol % has been prepared using simple chemical co-precipitation method and its thermoluminescence (TL) dosimetric properties were studied. The synthesized nanoparticle sample was characterized by X-ray diffraction (XRD) and the particle size of face centered cubic phase NPs was found around 30 nm. The shape, morphology and size were also observed by scanning electron microscopy (SEM). From gamma irradiated CaF{sub 2}:Dy TL curves, it was observed that the total areas of all the glow peak intensities are dramatically changed with increase in annealing temperature. Further, TL glow curve of the CaF{sub 2}:Dy at 183 °C annealed at 400 °C, showed very sharp linear response in the dose range from 1 Gy to 750 Gy. This linear response of CaF{sub 2}:Dy nanophosphor as a function of gamma dose is very useful from radiation dosimetric point of view.

61 RADIATION PROTECTION AND DOSIMETRY↗

Manufacturing of Dysprosium-Iron Alloys by Electrolysis in Fluoride-Based Electrolytes. Electrolysis in a Laboratory-Scale Cell

Electrolytic production of light rare earth elements and rare earth alloys with transition elements takes place in a fluoride-based electrolyte using rare earth oxides as raw material. The optimization of this method, mainly in terms of the energy efficiency and environmental impact control, is rather challenging. Anode effects, evolution of fluorine-containing compounds and side cathode reactions could largely be minimized by good control of the amount of rare earth oxide species dissolved in the fluoride-based electrolyte and their dissolution rate. The Dy{sub 2}O{sub 3} feed rate needed for stable cell operation was studied by following up the anode voltage and gas analysis. On-line analysis of the cell off-gases by FTIR showed that the electrochemical reaction for the formation of Dy-Fe alloy gives mainly CO gas and that CF{sub 4} is starting to evolve gradually at anode voltages of ca. 3.25 V. The limiting current density for the discharge of the oxide ions at the graphite anode was in the range of 0.1 to 0.18 A cm{sup −2} at dissolved Dy{sub 2}O{sub 3} contents of ca. 1 wt pct. Modeling of the laboratory cell reactor was also carried out by implementing two models, i.e., an electrical model simulating the current density distribution at the electrodes and a laminal bubbly flow model that explains the electrolyte velocity induced by gas bubble production at the anode.

36 MATERIALS SCIENCE↗

Ceramic planar waveguide structures for amplifiers and lasers

Ceramic and crystalline weakly guiding optical fibres with the core - cladding refractive index difference of 10{sup -2} - 10{sup -4} are fabricated by a hot pressing method. The waveguides with one or several cores for operation in the spectral range 0.2 - 5 {mu}m are produced. The waveguides are based on CaF{sub 2}, SrF{sub 2}, and BaF{sub 2} ceramics and crystals and their solid solutions doped with trivalent Pr, Nd, Tb, Dy, Yb, Ho, Er, and Tm ions, as well as on LiF ceramics and crystals with colour centres. The first results of investigation of the lasing properties of ceramic SrF{sub 2} : NdF waveguides under diode pumping are presented, and the prospects of further investigation are discussed. (lasers)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energy transfer kinetics in oxy-fluoride glass and glass-ceramics doped with rare-earth ions

An investigation of donor-acceptor energy transfer kinetics in dual rare earths doped precursor oxy-fluoride glass and its glass-ceramics containing NaYF{sub 4} nano-crystals is reported here, using three different donor-acceptor ion combinations such as Nd-Yb, Yb-Dy, and Nd-Dy. The precipitation of NaYF{sub 4} nano-crystals in host glass matrix under controlled post heat treatment of precursor oxy-fluoride glasses has been confirmed from XRD, FESEM, and transmission electron microscope (TEM) analysis. Further, the incorporation of dopant ions inside fluoride nano-crystals has been established through optical absorption and TEM-EDX analysis. The noticed decreasing trend in donor to acceptor energy transfer efficiency from precursor glass to glass-ceramics in all three combinations have been explained based on the structural rearrangements that occurred during the heat treatment process. The reduced coupling phonon energy for the dopant ions due to fluoride environment and its influence on the overall phonon assisted contribution in energy transfer process has been illustrated. Additionally, realization of a correlated distribution of dopant ions causing clustering inside nano-crystals has also been reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermally synthesized barium fluoride nanocubes for thermoluminescence dosimetry

In this work, we report a hydrothermally synthesized Dy doped BaF{sub 2} (BaF{sub 2}:Dy) nanocubes and its Thermoluminescence studies. The synthesized BaF{sub 2}:Dy samples was found to posses FCC structure and having average size ~ 60-70 nm, as revealed through X-Ray Diffraction. Cubical morphology having size ~90 nm was observed from TEM analysis. The {sup 60}Co γ- ray irradiated BaF{sub 2}:Dy TL dosimetric experiments shows a pre-dominant single glow peak at 153 °C, indicating a single level trap present as a metastable state. Furthermore, BaF{sub 2}:Dy nanophosphor shows a sharp linear response from 10 Gy to 3 kGy, thus it can be applicable as a gamma dosimeter.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The GdF3 phosphors with enhanced multicolor luminescence via multi-channel excitation and energy migration procedure

Highlights: • Core-shell structured GdF{sub 3} phosphors were synthesized by hydrothermal method. • SiO{sub 2} coating layers prevent aggregation and sintering during thermal annealing. • The annealed CSS nanophosphors were highly dispersible. • The inserted PMA significantly enhances multicolor luminescence. • The annealed CSS phosphors exhibit enhanced multicolor luminescence properties. - Abstract: A collection of GdF{sub 3} core-shell structured (CSS) phosphors were synthesized by hydrothermal method. The as-prepared (AP) phosphors were coated with SiO{sub 2} layers to avoid aggregation and sintering during thermal annealing at 800 °C, after which the SiO{sub 2} layers were etched off and the annealed phosphors became highly dispersible. The annealed CSS phosphor aGdF{sub 3}:Eu{sup 3+}@GdF{sub 3}:Ce{sup 3+},Dy{sup 3+} shows excellent multicolor luminescence performance with the aid of dual-channel excitation and energy migration (EM) procedure of Gd{sup 3+} ions. By inserting pyromellitic acid (PMA) organic ligands into the interfaces between annealed core and AP shell layer regions, the so-called antenna effect of organic ligands of PMA forms a new excitation channel, which makes the CSS phosphor aGdF{sub 3}:Eu{sup 3+}@PMA@GdF{sub 3}:Ce{sup 3+},Dy{sup 3+} exhibit significantly enhanced multicolor luminescence via multi-channel excitation and EM process. The prepared CSS phosphors in this work are excellent candidates for applications in solid-state lighting.

36 MATERIALS SCIENCE↗

Increase in the Tb{sup 3+} green emission in SiO{sub 2}-LaF{sub 3} nano-glass-ceramics by codoping with Dy{sup 3+} ions

95SiO{sub 2}-5LaF{sub 3} sol-gel derived nano-glass-ceramics single doped with 0.1Dy{sup 3+} or 0.1Tb{sup 3+} mol % and codoped with 0.1Dy{sup 3+} and xTb{sup 3+} (x=0.1,0.3) mol % were successfully obtained. XRD and HRTEM measurements confirm the precipitation of LaF{sub 3} nanocrystals during the ceramming process, with mean size ranging from 10 to 20 nm and increasing with the thermal treatment temperature. About 75% of lanthanide ions are partitioned into LaF{sub 3} nanocrystals, as calculated from luminescence decays. The effect of increasing the Tb{sup 3+} concentration and also of codoping with Dy{sup 3+} in the Tb{sup 3+} green emission from the {sup 5}D{sub 4} level have been studied. The energy transfer mechanisms between Tb{sup 3+} ions and also between Tb{sup 3+}-Dy{sup 3+} ions, which favor the green emission, have been analyzed.

36 MATERIALS SCIENCE↗

Search for rare nuclear decays with HPGe detectors at the STELLA facility of the LNGS

Results on the search for rare nuclear decays with the ultra low background facility STELLA at the LNGS using gamma ray spectrometry are presented. In particular, the best T{sub 1/2} limits were obtained for double beta processes in {sup 96}Ru and {sup 104}Ru. Several isotopes, which potentially decay through different 2β channels, including also possible resonant double electron captures, were investigated for the first time ({sup 156}Dy, {sup 158}Dy, {sup 184}Os, {sup 192}Os, {sup 190}Pt, {sup 198}Pt). Search for resonant absorption of solar {sup 7}Li axions in a LiF crystal gave the best limit for the mass of {sup 7}Li axions (< 8.6 keV). Rare alpha decay of {sup 190}Pt to the first excited level of {sup 186}Os(E{sub exc} = 137.2keV) was observed for the first time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Facile Room-Temperature Electrodeposition of Rare Earth Metals in a Fluorine-Free Task-Specific Electrolyte

Electrochemical deposition of rare earth metals at room temperature has attracted increasing interest due to its advantage in energy efficiency over traditional hydrometallurgical and pyrometallurgical processes. Recent progress has been made with fluorinated electrolyte systems; however, the formation of an electrode-passivating fluoride layer by electrolyte decomposition is often overlooked. Such a passivation layer causes significant and rapid decay of the deposition current and significantly hinders practical application. To address this issue, we demonstrate a fluorine (F)-free task-specific electrolyte utilizing the borohydride anion for the efficient electrodeposition of rare earth metals. By eliminating the passivation effect, the deposition process exhibits a stable current and accumulates a thick neodymium deposit on the electrode. Raman spectroscopy of the electrolyte reveals a synergetic effect between rare earth borohydride and lithium borohydride which promotes the dissociation of both borohydride salts, resulting in significantly increased ionic conductivity and electrochemical performance. Cyclic voltammetry and in-depth X-ray photoelectron spectroscopy of the deposits suggest that the electrodeposition of rare earth metals could undergo a Li-mediated reduction process. Finally, quantitative analysis of the deposits reveals that the overall concentration of the rare earth elements reaches 75% which contains 40–48% metallic phase.

36 MATERIALS SCIENCE↗