SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Aerial Detection and Measurements analysis concept to be presented at the 11th Annual International Aerial Measuring System (iAMS) Technical Exchange workshop in Berne, Switzerland in September, 2023.
Mechanical shocks, particularly pyroshocks, are environments that all spacecraft and launch vehicles experience. Pyroshocks can be challenging design environments for space hardware because these events are often high frequency, high intensity transients. Furthermore, since design decisions must be made relatively early in the design phase, understanding, and accurately defining pyroshock excitation and the loads that it imparts on components is important to ensure the high reliability required of spacecraft and rockets. Here, general guidelines about shock transmission through spacecraft structures are provided in NASA and MIL handbooks and standards, but these are relatively broad guidelines, and recent studies have shown that more accurate and less-conservative predictions are needed. However, predicting shock response accurately is still a challenge because of the high frequencies in a pyroshock excitation.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 site. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Virtual tower data consist of profiles of wind speed and direction at a number of locations near the A1 sites. These profiles were computed from dual-Doppler analysis of two Halo XR+ scanning Doppler lidars located at sites A5 and A7. Both lidars performed shallow RHI scans in the general direction of the A1 site. Scan azimuths were periodically adjusted to sample different locations. This resulted in a total of 14 unique tower locations over 5 periods between 12 November 2022 and 17 October 2023.
Abstract not provided.