Search NASA⌕ Search

SEARCH · Search NASA

Results for “Density Functional Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Many-body perturbation theory with hybrid density functional theory starting points accelerated by adaptively compressed exchange

We report on the use of the adaptively compressed exchange (ACE) operator to accelerate many-body perturbation theory (MBPT) calculations, including G 0 W 0 and the Bethe–Salpeter equation (BSE), for hybrid density functional theory starting points. We show that by approximating the exact exchange operator with the low-rank ACE operator, substantial computational savings can be achieved with systematically controllable errors in the quasiparticle energies computed with full-frequency G 0 W 0 and the optical absorption spectra and vertical excitation energies computed by solving the BSE within density matrix perturbation theory. Our implementation makes use of the ACE-accelerated electronic Hamiltonian to carry out both G 0 W 0 and BSE without explicitly computing empty states. We show the robustness of the approach and present the computational gains obtained on both the central processing unit and graphics processing unit nodes. In conclusion, our work will facilitate the exploration and evaluation of fine-tuned hybrid starting points aimed at enhancing the accuracy of MBPT calculations without involving computationally demanding self-consistency in Hedin’s equations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Modeling Pb(II) Adsorption on Mineral Surfaces: Bridging Density Functional Theory and Experiment with Thermodynamic Insights

Despite decades of work on aqueous lead (Pb) adsorption on a-Fe2O3 (hematite) and a-Al2O3 (alumina), gaps between measurements and modeling obscure molecular-level understanding. Achieving well-matched geometries between theory and experimental for mineral-water interfaces is a hurdle, as surface functional group type and distribution must be accounted for in determining mechanisms. Additionally, computational methods that can describe the substrate are often not appropriate to capture aqueous effects. Progress requires focusing on well-studied and relevant systems, such as key facets (001),(012), and (110) of hematite and alumina, and ubiquitous contaminants such as aqueous Pb. In the past, bulk-parametrized bond-valence principles were used to rationalize Pb(II) adsorption trends. These approaches can break down at surfaces, where flexible bonding environments and adsorption-induced surface relaxations play a critical role. Here, we adapt and apply a density functional theory (DFT) and thermodynamics framework, integrating DFT-calculated energies with experimental data and electrochemical principles, to predict Pb(II) adsorption. Our model results capture trends across the full set of surfaces and predict that inner-sphere Pb(II) sorption on (001) alumina varies from unfavorable to weakly favorable across a range of pH conditions. This aligns with experiment insights that Pb(II) interacts at that surface through outer-sphere interactions. Extending to Fe(II) adsorption, we demonstrate a coverage-dependent site preference, potentially explaining disorder in overlayers grown by the oxidative adsorption of Fe(II) on hematite (001).

lead contamination↗
DOE OSTI2025

CpFe(CO) 2 Radical Generated from Dinuclear [CpFe(CO) 2 ] 2 and Mononuclear (Cp)(CO) 2 Fe(H): Density Functional Theory Is Accurate for One, But Not Both

Density functional theory (DFT) methods remain the most practical approach to calculating properties and reaction mechanisms of transition metal complexes. While the accuracy of DFT methods has been evaluated for some properties of mononuclear organometallic complexes there has been a general lack of evaluation for dinuclear organometallic complexes, in particular bonding changes related to reaction mechanisms. Here, this work evaluated DFT and coupled cluster methods for the accuracy of calculating the CpFe(CO) 2 radical (Fp•) generated from dinuclear [CpFe(CO) 2 ] 2 (Fp 2 ) and mononuclear [(Cp)(CO) 2 Fe(H)] (Fp-H). This transition metal radical fragment was evaluated because dinuclear complexes built with it have recently shown a variety of unique reactions but has proven challenging to accurately calculate with DFT methods. Here we show that DFT methods provide a surprising wide range of fragmentation energies for Fp 2 and lower and mid rung DFT methods as well as DLPNO–CCSD(T) perform well for this dissociation energy. The highest rung double-hybrid methods have a large range in the Fp 2 dissociation energy, and the energy greatly depends on the amount of MP2 correlation energy included. For generating Fp• from Fp-H the lower and mid rung methods that worked well for Fp 2 showed significant error. Double-hybrid methods unfortunately are only accurate for the Fe–H bond if they are very inaccurate for the Fp 2 dissociation energy. While DLPNO–CCSD(T) is not perfect, and not close to chemically accurate for the Fe–H bond, it does provide reasonable accuracy for both Fp 2 and Fp-H dissociation energies.

density functional theory↗
DOE OSTI2024

Field-induced magnetization of δ -plutonium from density functional theory

Here, we present results from density functional theory (DFT) calculations of magnetization, induced by an external magnetic field, for δ-phase plutonium. The fully relativistic electronic structure accounts for Zeeman splitting effects through a Hamiltonian that couples the magnetic field to both spin and orbital magnetic moments. The electronic-structure model is further improved by an extension to DFT in terms of an orbital-orbital coupling via the conventional orbital-polarization method, as has routinely been done for plutonium. The response to the applied magnetic field is shown to be weak in the DFT model, with induced magnetic moments of the order of in magnetic fields up to 30 T. These results are in accord with recent assessments from x-ray magnetic circular dichroism measurements in magnetic field on δ-plutonium. Somewhat surprisingly, a model assuming δ-plutonium to be absent magnetic moments shows stronger response to an external static magnetic field than models allowing for antiferromagnetism or magnetic disorder.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Importance of enforcing Hund’s rules in density functional theory calculations of rare earth magnetocrystalline anisotropy

Density functional theory (DFT) and its extensions, such as DFT+U and DFT+dynamical mean-field theory, are invaluable for studying magnetic properties in solids. However, rare-earth (R) materials remain challenging due to self-interaction errors and the lack of proper orbital polarization. We show how the orbital dependence of self-interaction error contradicts Hund’s rules and plagues magnetocrystalline anisotropy (MA) calculations, and how analyzing DFT states that respect Hund’s rules can mitigate this issue. We benchmark MA in RCo 5 , R 2 Fe 14 B, and RFe 12 , extending prior work on RMn 6 Sn 6 , achieving excellent agreement with experiments. Additionally, we illustrate a semi-analytical perturbation approach that treats crystal fields as a perturbation in the large spin-orbit coupling limit. Using Gd-4f crystal-field splitting, this method provides a microscopic understanding of MA and enables rapid screening of high-MA materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Linearized Pair-Density Functional Theory with Spin–Orbit Coupling

Here, we include spin–orbit coupling (SOC) effects in linearized pair-density functional theory (L-PDFT), which is a multistate extension of multiconfiguration pair-density functional theory (MC-PDFT). Both 1-electron and 2-electron SOC integrals are computed using Breit-Pauli and Douglas–Kroll–Hess Hamiltonians in the atomic mean-field approximation. SO-L-PDFT removes the unphysical J-symmetry breaking observed in MC-PDFT. The accuracy of SO-L-PDFT is validated by calculations of zero-field splittings, fine-structure excitation energies, and low-energy excited-state spectra for a diverse group of atoms and molecules spanning the whole range of the periodic table, including atoms of groups 3, 11, and 13–17, the Ce 3+ and U 5+ ions, group 16 monohydrides, group 17 monoxides, lanthanide hexachlorides ([CeCl 6 ] 3− , [PrCl 6 ] 3− , and [NdCl 6 ] 3− ), actinyl ions ([UO 2 ] + , [NpO 2 ] 2+ ), and tricarbonatoactinyl complexes ([UO 2 (CO 3 ) 3 ] 5− , [NpO 2 (CO 3 ) 3 ] 4− ). We also compare the results to new spin–orbit-inclusive calculations by single-state and multistate multireference perturbation theory.

Hamiltonians↗
DOE OSTI2026

Finite-range pairing in nuclear density functional theory

Pairing correlations are ubiquitous in low-energy states of atomic nuclei. To incorporate them within nuclear density functional theory, often used for global computations of nuclear properties, pairing functionals that generate nucleonic pair densities and pairing fields are introduced. Many pairing functionals currently used can be traced back to zero-range nucleon-nucleon interactions. Unfortunately, such functionals are plagued by deficiencies that become apparent in large model spaces that contain unbound single-particle (continuum) states. In particular, the underlying computational schemes diverge as the single-particle space increases, and the results depend on how marginally occupied states are incorporated. These problems become more pronounced for pairing functionals that contain gradient-density dependence, such as in the Fayans functional. To remedy this, finite-range pairing functionals are introduced. In this study, this is done by folding the pair density with Gaussians. Here, we show that a folding radius of about 1 fm offers the best compromise between quality and stability, and substantially reduces the pathological behavior in different numerical applications.

Nuclear density functional theory↗
DOE OSTI2025

Real-space Kohn–Sham density functional theory for complex energy applications

Real-space Kohn-Sham density functional theory (real-space KS-DFT) enables large-scale electronic structure simulations that is particularly well-suited for the modern high-performance computing (HPC) architectures. This feature article reviews its theoretical foundations, highlights the algorithmic advances and recent developments, and showcases applications in complex nano systems. We aim to provide a perspective on the trajectory of real-space KS-DFT as an emerging tool for computational chemistry and materials science in the exascale era.

Zhang, Zeyi↗
DOE OSTI2025

Quantum Monte Carlo and Density Functional Theory Study of Strain and Magnetism in 2D 1T-VSe 2 with Charge Density Wave States

Two-dimensional (2D) 1T-VSe 2 has prompted significant interest due to the discrepancies regarding alleged ferromagnetism (FM) at room temperature, charge density wave (CDW) states, and the interplay between the two. We employed a combined Diffusion Monte Carlo (DMC) and density functional theory (DFT) approach to accurately investigate the magnetic properties, CDW states, and their responses to strain in monolayer 1T-VSe 2 . Our calculations show the delicate competition between various phases, revealing critical insights into the relationship between their energetic and structural properties. Here, we performed classical Monte Carlo simulations informed by our DMC and DFT results and found the magnetic transition temperature (T c ) of the undistorted (non-CDW) FM phase to be 228 K and the distorted (CDW) phase to be 68 K. Additionally, we studied the response of biaxial strain on the energetic stability and magnetic properties of various phases of 2D 1T-VSe 2 and found that small amounts of strain can increase the T c , suggesting a promising route for engineering and enhancing magnetic behavior. Finally, we synthesized 1T-VSe 2 and performed Raman spectroscopy measurements, which were in close agreement with our calculated results, validating our computational approach. Our work emphasizes the role of highly accurate DMC methods in advancing the understanding of monolayer 1T-VSe 2 and provides a robust framework for future studies of 2D magnetic materials.

2D magnets↗
DOE OSTI2026

Modeling an S N 2 Reaction Mechanism for Hydrolysis of Siloxane Linkages with Density Functional Theory under Basic Conditions and Implications for Dissolution of Quartz

An extended silicate molecular cluster was used to perform density functional theory calculations to determine if an S N 2 mechanism, where OH – attacks a Q 1 Si coupled with Na + charge balancing an adjacent siloxane bridging O atom, could explain the observed energy of activation of quartz dissolution under basic conditions.

chemical calculations↗
DOE OSTI2024

Tunneling magnetoresistance in MgO tunnel junctions with Fe-based leads in empirically corrected density functional theory

The minority-spin Fe/MgO interface states are at the Fermi level in density functional theory (DFT), but experimental evidence and GW calculations place them slightly higher in energy. This small shift can strongly influence tunneling magnetoresistance (TMR) in junctions with a thin MgO barrier and its dependence on the concentration of Co in the electrodes. Here, in this study, an empirical potential correction to DFT is introduced to shift the interface states up to match the tunnel spectroscopy data. With this shift, TMR in Fe/MgO/Fe junctions exceeds 800% and 3000% at 3 and 4 monolayers (ML) of MgO, respectively. We further consider the effect of alloying of the Fe electrodes with up to 30% Co or 10% V, treating them in the coherent potential approximation (CPA). Alloying with Co broadens the interface states and brings a large incoherent minority-spin spectral weight to the Fermi level. Alloying with V brings the minority-spin resonant states close to the Fermi level. However, in both cases the minority-spin spectral weight at the Fermi level resides primarily at the periphery of the Brillouin zone, which is favorable for spin filtering. Using convolutions of k II -resolved barrier densities of states calculated in CPA, it is found that TMR is strongly reduced by alloying with Co or V but still remains above 500% at 4 ML of MgO up to 30% of Co or 5% V. At 5 ML, the TMR increases above 1000% in all systems considered. However, while TMR declines sharply with increasing bias up to 0.2 eV in the tunnel junctions with pure Fe leads, it remains almost constant up to 0.5 eV if leads are alloyed with Co.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Halogen Thermochemistry Assessed with Density Functional Theory: Systematic Errors, Swift Corrections and Effects on Electrochemistry

Abstract Despite its sizable errors, density functional theory (DFT) is extensively used to evaluate thermochemical properties of gases, liquids and their interfaces with solids. As numerous halogen‐containing compounds appear as reactants, products and/or electrolytes in electrochemical reactions, and ionic effects are currently an active area of research, it is important to evaluate the accuracy of DFT for halogen thermochemistry. Herein, we assess the formation energies of interhalogens, hydrogen halides, diatomic and atomic halogens and their ions using six widespread functionals at the GGA, meta‐GGA and hybrid levels. We observe that DFT errors with respect to experiments are correlated with the electronegativity of the species and there are systematic trends across functionals, such that swift corrections were devised. Specifically, the average of the mean absolute errors for the six functionals decreased from 0.19 eV before the corrections to 0.08 eV after them. Besides, the overall maximum absolute error (MAX) decreased from 0.76 to 0.44 eV and the average of the MAXs decreased from 0.51 to 0.24 eV. Finally, we illustrate the qualitative and quantitative impact of gas‐phase errors on the predictions of surface Pourbaix diagrams.

Chemistry↗
DOE OSTI2025

Synergistic Density Functional Theory and Molecular Dynamics Approach to Elucidate PNIPAM–Water Interaction Mechanisms

This study employs Density Functional Theory (DFT) and Molecular Dynamics (MD) simulations to investigate interactions between water molecules and Poly(N-isopropylacrylamide) (PNIPAM). DFT reveals preferential water binding sites, with enhanced binding energy observed in the linker zone. Quantum Theory of Atoms in Molecules (QTAIM) and electron localization function (ELF) analyses highlight the roles of hydrogen bonding and steric hindrance. MD simulations unveil temperature-dependent hydration dynamics, with structural transitions marked by changes in the radius of gyration (Rg) and the radial distribution function (RDF), aligning with DFT findings. Our work goes beyond prior studies by combining a DFT, QTAIM and MD simulations approach across different PNIPAM monomer-to-30mer structures. It introduces a systematic quantification of pseudo-saturation thresholds and explores water clustering dynamics with structural specificity, which have not been previously reported in the literature. These novel insights establish a more complete molecular-level picture of PNIPAM hydration behavior and temperature responsiveness, emphasizing the importance of amide hydrogen and carbonyl oxygen sites in hydrogen bonding, which weakens above the lower critical solution temperature (LCST), resulting in increased hydrophobicity and paving the way for understanding water sorption mechanisms, offering guidance for future applications such as dehumidification and atmospheric water harvesting.

08 HYDROGEN↗
DOE OSTI2025

Computation of Auger Electron Spectra in Organic Molecules with Multiconfiguration Pair-Density Functional Theory

Efficient and accurate computation of molecular Auger electron spectra for larger systems is limited by the rapid increase in the number of doubly ionized final states as the system size grows. Here, in this work, we benchmark the application of multiconfiguration pair-density functional theory with a restricted active space (RAS) reference wave function for computing the carbon K-edge decay spectra of 20 organic molecules. Decay rates are computed within the one-center approximation. We evaluate the performance of different basis sets and on-top functionals and find that multiconfiguration pair-density functional theory achieves accuracy comparable to RAS followed by second-order perturbation theory, but at significantly lower computational cost.

Fouda, Adam E. A. [Argonne National Laboratory (AN↗
DOE OSTI2026

Excitation energy of fission fragments within nuclear time-dependent density functional theory

The number and properties of the neutrons and photons emitted in nuclear fission are directly related to the excitation energy of the fission fragments when they are formed at scission. Though not observable experimentally because of the extremely short timescales, the excitation energy of fission fragments can be predicted by microscopic theory based on time-dependent density functional theory (TDDFT). Initial results on the value of the total kinetic energy of fission reactions were very promising, but could not probe all possible fragmentations. Here, in this work, we perform large-scale TDDFT calculations in 240 Pu enabled by the development of a new TDDFT solver. We obtain TDDFT trajectories covering nearly all possible fragmentations. We find that the total kinetic energy is close to experimental values only for the most likely fission while it is severely underestimated at both small and large asymmetries. This conclusion seems rather independent of the parametrization of the energy functional, both in its particle-hole and particle-particle channels.

Physics - Nuclear physics and radiation physics↗
DOE OSTI2025

Accuracy of Kohn–Sham density functional theory for warm- and hot-dense matter equation of state

We study the accuracy of Kohn–Sham density functional theory (DFT) for warm- and hot-dense matter (WDM and HDM). Specifically, considering a wide range of systems, we perform accurate ab initio molecular dynamics simulations with temperature-independent local/semilocal density functionals to determine the equations of state at compression ratios of 3x–7x and temperatures near 1 MK. We find very good agreement with path integral Monte Carlo benchmarks, while having significantly smaller error bars and smoother data, demonstrating the accuracy of DFT for the study of WDM and HDM at such conditions. In addition, using a Δ-machine learned force field scheme, we confirm that the DFT results are insensitive to the choice of exchange-correlation functional, whether local, semilocal, or nonlocal.

Suryanarayana, Phanish (ORCID:0000000151720049)↗
DOE OSTI2025

Mechanistic Insights into the Demethylation of Lignin‐Derived Structures Using Protic Ionic Liquids: A Density Functional Theory Study

Lignin valorization is restricted by the stability of its methoxy groups, creating a critical need for efficient demethylation strategies. Here, in this study, density functional theory (DFT) is employed to dissect the mechanistic pathways of demethylation in lignin model compounds, guaiacol and syringol, using protic ionic liquids (PILs) that act as both solvent and catalyst. Conductor‐like Screening Model for Real Solvents (COSMO‐RS) analysis identifies monoethanolammonium acetate ([MEOA][Ace]) as the most promising medium, attributed to its strong hydrogen bonding network and solvation ability. By integrating implicit and explicit solvation models, it is revealed that an acid‐catalyzed hydrolytic mechanism governs demethylation, with PILs stabilizing crucial transition states and intermediates. Complementary electronic structure evaluations, including highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO‐LUMO) gap analysis, charge distribution, and electrostatic potential mapping, demonstrate how PILs lower energetic barriers and enhance reactivity. To simulate realistic environments, this study is extended to lignin dimer complexes with varying water content, uncovering how water‐bridged solvation reverses demethylation preference from guaiacyl to syringyl units. This mechanistic shift aligns with experimental observations showing faster S‐unit reactivity in hydrated systems. Together, these findings provide atomic‐level insight into lignin demethylation dynamics and highlight how tuning acid concentration in PILs can accelerate kinetics, enabling a rational pathway toward next‐generation biomass conversion technologies.

COSMO-RS↗