Lithium leaching recovery and mechanisms from density fractions of an Illinois Basin bituminous coal
Not provided.
Energy & Fuels↗
SEARCH · Search NASA
Results for “Density fractionation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Effects of 9.5 years warming on SOC concentration and composition in bulk soil and density fractions
Original data of whole-soil warming experiment after 9.5 years at Blodgett Forest Research Station. The Blodgett Forest is a mixed coniferous temperate forest with Mediterranean climate. The annual air temperature is 12.5℃ and the annual precipitation is 1774 mm yr-1- The soil is mesic ultic Alfisol of granitic origin, equivalent to Dystric Cambisol according to The World Reference Base for Soil Resources (WRB) system. The soil is warmed down to 1 m at + 4℃ by vertically installed heating cables. At the time of soil sampling on 1 May 2023, the whole-soil warming experiment had been running for approximately 9.5 years, from January 2014 to May 2023. The dataset includes: - Bulk_EA: C, N content, δ13C, and CN ratio of bulk soil; - Density_fractionation: organic carbon concentration, δ13C, and C/N ratio of free light fraction (fLF), occluded ligh fraction (oLF), and heavy fraction (HF); - PCA_DRIFT_AUC: original data of area under the curve (AUC) values of eight carbon bond types integrated on diffuse reflectance infrared fourier transform spectroscopy for each soil sample and soil fraction, which are consequently used for principal component analysis (PCA); - DRIFTS_stability_index: the calculation of aliphatic C–H (3000–2800 cm-1) to aromatic C=C (1670–1600 cm-1) ratios for each bulk soil sample and soil fraction. All data are provided in CSV format and can be viewed using Microsoft Excel.
Climate change↗
Effects of 9.5 Years of Whole-Soil Warming on the Fatty Acid and n-Alkanes Composition in Bulk Soil and Density Fractions at Blodgett Experimental Forest, California, USA
Original data of molecular data (fatty acids and n-alkanes) including concentrations and calculated molecular proxies in a whole-soil warming experiment at the Blodgett Forest Research Station after 9.5 years of warming. The study site has a Mediterranean climate with annual average temperature of 12.5 ℃ and annual average precipitation of 1774 mm. The study site is characterized by a mesic Ultic Alfisol formed from granitic parent material, corresponding to a Dystric Cambisol under the World Reference Base for Soil Resources (WRB) classification system. Experimental warming is applied throughout the soil profile to a depth of 1 m using vertically embedded heating cables that raise soil temperature by 4 °C relative to ambient conditions. Soil samples were collected on 1 May 2023, after the experiment had been operating continuously for about 9.5 years since its initiation in January 2014.The data has been processed from raw data and cross-validated by other peers. The dataset includes: - Bulk_Fattyacid_9.5-year_Soil_Warming_Blodgett, California, USA: fatty acid concentrations and proxies including Carbon Preference Index (CPI) and Average Chain Length (ACL) of bulk soil organic carbon; - Fractions_Fattyacid_9.5-year_Soil_Warming_Blodgett, California, USA: fatty acid concentrations and proxies including CPI and ACL of free particulate organic matter (fPOM) and mineral-associated organic matter (MAOM); - Bulk_Alkanes_9.5-year_Soil_Warming_Blodgett, California, USA: n-alkanes concentrations and proxies including CPI and ACL of bulk soil organic carbon; - Fractions_Alkanes_9.5-year_Soil_Warming_Blodgett, California, USA: n-alkanes concentrations and proxies including CPI and ACL of fPOM and MAOM; - n-Alkanes_All_Monomer_Concentration_9.5-year_Soil_Warming_Blodgett, California, USA: concentration of all the n-alkane monomers identified and integrated for bulk soil, fPOM and MAOM; - Fattyacid_All_Monomer_Concentration_9.5-year_Soil_Warming_Blodgett, California, USA: concentration of all the fatty acid monomers including diacids identified and integrated for bulk soil, fPOM, and MAOM. All data are provided in CSV format and can be viewed using Microsoft Excel. We specifically look at fatty acids (FA) and n-alkanes in bulk soil, fPOM and MAOM and calculated molecular proxies such as CPI and ACL to understand the source of oragnic carbon (with ACL) and degree of decomposition (CPI) of each soil fraction. Due to lack of long-chain fatty acids (carbon number ⩾ 20), microorganism-derived organic carbon is characterized by shorter ACL in comparison to plant-derived organic carbon. Fresh SOC is characterized by even-over-odd dominance for fatty acids and odd-over-even dominance for n-alkanes. Therefore, CPI indicates whether soil organic carbon (SOC) represents fresh input (CPI > 10) or is strongly decomposed (close to 1). The research questions should be then, after 9.5-year warming: 1. whether the relative contribution between microorganism-derived and plant-derived SOC in each soil fraction? 2. whether fPOM became more decomposed whereas MAOM remained relatively persistent in each soil fraction across the soil depth?
Carbon↗
Fractional densities and character of dislocations in different slip modes from powder diffraction patterns
Not Available
Materials Science↗
Pretreatment of Bituminous Coal By-Products for the Hydrometallurgical Extraction of Rare Earth Elements
Low-temperature plasma (LTP) oxidation has been widely used to study the mineralogy of the mineral matter existing in coal sources. The current study investigated the potential of LTP oxidation as a pre-treatment method to improve rare earth element (REE) leachability from coal and its by-products. Representative density-fractionated samples of Baker and Fire Clay coarse refuse seam materials were ground to a top size of 180 µm and subjected to low-temperature plasma oxidation. Subsequently, the treated samples were leached at 1% w/v solids concentration and 75 °C for 5 h using (i) de-ionized (DI) water, (ii) 0.1 mol/L of ammonium sulfate, and (iii) 1.2 mol/L of sulfuric acid. It was determined that LTP treatment improved REE leaching characteristics, especially the leaching of heavy REEs (HREE), existing in the lighter density fractions of the Baker seam coarse refuse material. For instance, the HREE recovery for the 1.6 specific gravity (SG) float fraction increased from 8% to 33% using 0.1 mol/L of ammonium sulfate solution after 32 h of LTP treatment. This finding indicated that HREEs associated with the organic matter were released by the LTP treatment and adsorbed onto the surfaces of highly negative charged mineral matter and was exchanged with ammonium to allow their recovery. Similarly, when using 1.2 mol/L of sulfuric acid, the HREE recovery increased from 23% to 53% for the 1.6 SG float fraction. Interestingly, LTP oxidation did not provide significant improvement in REE recovery from the 2.2 sink density fractions, which was likely due to its lower organic content. No significant benefits were observed when treating the Fire Clay coarse refuse material, which was likely due to the lack of organic affinity and the difficult-to-leach REE minerals associated with the coal source such as monazite, xenotime, and zircon. Conversely, high-temperature oxidation within a temperature range of 600–750 °C significantly improved REE leaching characteristics for both coal sources. Improvement in REE recovery was due to decarbonization of the material, clay dehydroxylation and subsequent conversion of liberated REE-bearing minerals into a more leachable form. However, increasing the temperature above 800 °C decreased REE recovery due to the conversion of meta-kaolinite into mullite, which is chemically stable.
58 GEOSCIENCES↗
2017 Meander C sediment characterization from the East River, Colorado
This dataset includes characterization data collected on sediment samples from Meander C as part of the Watershed Function Scientific Focus Area (SFA) located in the Upper Colorado River Basin. The data were collected to investigate the nature of mineral-organic associations across the meander transect and with depth. Samples were collected in 2017, and analyzed using sequential extractions (water, pyrophosphate, HCl, and dithionite) and density fractionation. Data collected include: texture, pH, root biomass, and metals (Fe, Al, Ca, Si) of bulk sediment samples; C and N of heavy fraction; and extractable OC, Fe, and Al, and organic matter characterization using high-resolution mass spectrometry (FT-ICR-MS) of sequential extractions. Sample locations are included in the ‘sample_metadata.xlsx” file. Sediment characterization data is included in the accompanying csv files: bulk and density fractions (MCB2017_density-and-bulk-fractions.csv), sequential extractions (MCB2017_sequential-extractions.csv), and FT-ICR-MS data from sequential extractions in three files to be read by the R package ftmsRanalysis (MCB2017_FTICRMS-sequential-edata.csv, MCB2017_FTICRMS-sequential-emeta.csv, and MCB2017_FTICRMS-sequential-fdata.csv). Sediment was collected in triplicate; ID’s refer to individual samples.
54 ENVIRONMENTAL SCIENCES↗
Soil organic matter, tree communities, and fungal communities across mycorrhizal gradients in the Eastern United States
We collected these data to investigate how mycorrhizal associations are related to soil C and N across four sites in the eastern U.S. broadleaf forest biome, which capture broad variability in climate and tree species. Our sites represented each of the four ecoregions in the eastern United States temperate forest—warm continental (New Hampshire), hot continental (Wisconsin), Prairie (Illinios), and subtropical (Georgia). This breadth naturally provided tree species diversity and allowed us to also investigate how soil C and N are related to canopy tree and EcM fungal community composition. Specifically, we analyzed the effects of mycorrhizal association, canopy tree family, and EcM fungal taxa on the proportion of C and N associated with soil minerals (MAOM) and bulk soil C:N. These are plot level data from forests in New Hampshire, Georgia, Wisconsin, and Illinois. The plots are 10 m in radius and vary across gradients of ectomycorrhizal tree basal area. Within each plot, data include the basal area of all trees >2 cm in diameter identified to species, the abundance of different fungal taxa based on ITS sequences, and the %C, %N, C:N of bulk soil and of soil density fractions (free light, occluded light, and particulate) as well as the proportion of soil C and N within each fraction. The soil data (both organic matter and fungal communities) are from the top 10 cm of the mineral soil. This also includes a meta-analysis of leaf litter k and C:N values for the tree species present in the forests.The "Tree_BA_ALL.csv" files include the basal area of all trees >2 cm in diameter at breast height within our 10 cm radii plots. The "Soil_Data_Final.csv" file contains the soil carbon and nitrogen in bulk and density fractions (concentrations as well as proportion for free light fraction (fLF), occluded light fraction (oLF), and heavy or dense fraction (HF), oxalate extractable iron and aluminum concentrations, as well as the geographic coordinates of each plot's location. The "FungiNonRelative.csv" file contains the abundances of fungal taxa identified via ITS sequencing for each plot (with the exception of 4 plots from GA where there was not enough quality DNA to extract).The "R_ReadyK.csv" and "R_Ready_CN.csv" files contain leaf litter decomposition constant (k) and C:N values from the literature for the tree species found at our sites.
54 ENVIRONMENTAL SCIENCES↗
Constraints on the Muon Fraction and Density Profile in Neutron Stars
Muons in neutron stars (NSs) play especially important roles in addressing several interesting new physics questions associated with detecting as well as understanding interactions and astrophysical effects of muonphilic dark matter particles. The key model inputs for studying the latter are the total muon mass M μ , the muon mass fraction M μ /M NS over the NS mass M NS , and the muon radial density profile ρ μ (r) in NSs of varying masses. We investigate these quantities within a minimum model for the core of NSs consisting of neutrons, protons, electrons, and muons using an explicitly isospin-dependent parametric equation of state (EOS) constrained by available nuclear laboratory experiments and the latest astrophysical observations of NS masses, radii, and tidal deformabilities. Here, we found that the absolutely maximum muon mass M μ and its mass fraction M μ /M NS in the most massive NSs allowed by causality are about 0.025 M ⊙ and 1.1%, respectively. For the most massive NS of mass 2.14 M ⊙ observed so far, they reduce to about 0.020 M ⊙ and 0.9%, respectively. We also study respective effects of individual parameters describing the EOS of high-density neutron-rich nucleonic matter on the muon contents in NSs with varying masses. We found that the most important but uncertain nuclear physics ingredient for determining the muon contents in NSs is the high-density nuclear symmetry energy.
79 ASTRONOMY AND ASTROPHYSICS↗
Low-Temperature Plasma Treatment for Enhanced Recovery of Highly Valued Critical REEs from Coal (Final Report)
The principle objective of this project was to develop a novel process flowsheet using low-temperature plasma treatment (LTP) integrated with conventional hydrometallurgical processes to recover rare earth elements (REEs), especially highly valued REEs (i.e. scandium and critical REEs), from coal and coal byproducts. LTP treatment was used to pretreat the solid feed material prior to leaching in an effort to improve the leaching characteristics of the REEs and potentially reduce acid consumption. Initially, a detailed experimental program was performed on a laboratory LTP furnace to identify a set of process parameter values to be used for assessing the enhanced leaching performance achieved on four specific gravity fractions of West Kentucky No. 13 and Fire Clay coarse coal refuse materials. High-temperature oxidation (HTO)) was also evaluated as a means for improving REE leachability on the same fractions of both coal sources. The lixiviants used to assess leachability improvements included: i) untreated water, ii) 0.1 M ammonium sulfate solution and iii) 1.2 M sulfuric acid solution at a temperature of 75°C. The laboratory data was used to develop multiple process flow sheets using HTO only to produce a rare earth oxide mix concentrate or utilizing both LTP and HTO treatment processes to generate a high purity heavy REO mix concentrate and a light REO mix concentrate. A techno-economic analysis was performed on each circuit. Low-temperature plasma oxidation was found to enhance REE leaching characteristics for all specific gravity (SG) fractions of the West Kentucky No. 13 coarse refuse material. The leaching recovery improvement was preferentially achieved for the heavy REEs with higher values obtained when treating the lower density fraction material. For example, the leaching recovery for the heavy REEs in the untreated 1.6 SG Float fraction material was 8% in a 0.1 M ammonium sulfate solution. After LTP treatment for 32 hours, heavy REE recovery increased to 33%. The corresponding recovery value for the light REEs was 10%. These findings indicate a strong affinity of the heavy REEs with the organic material, which is the component being reduced in content during the LTP treatment. Scanning electron micrographs showed the development of a honeycomb structure with increased LTP treatment with higher surface area as confirmed from BET measurements. Higher surface area promotes improved leaching efficiency due to enhance chemical interactions. When using 1.2 M sulfuric acid, the LTP treatment was found to provide a heavy REE recovery increase from 23% to 53% for the 1.6 SG Float fraction which corresponded to an ash content increase from around 20% to 35%. However, LTP treatment provided no improvement in leaching characteristic for the 2.2 SG sink material in the acid solution, which was likely due to the low organic content. The LTP treatment of the Fire Clay SG fractions provided no improvement in REE leaching characteristic, which may be due to the association with REE minerals such as monazite and REE-associated mineral matter such as clays. High temperature oxidation using temperatures in the range of 600-750OC was found to significantly enhance the leaching characteristics of both the light and heavy REEs for all density fractions in both coarse coal refuse materials. Generally, the increase in light REE recovery for the West Kentucky material was from 15% for the untreated material to 90% for the HTO treated material at 600°C. Recovery values dropped significantly when using temperatures below 600°C and above 750°C. The impact of the excessive temperatures was most likely a result of sintering. For the heavy REEs, HTO significantly improved recovery in the lighter SG fractions, which may be due to an affinity with the organic content. Only limited heavy REE recovery improvement was obtained for the denser SG fractions. Another benefit of HTO is the conversion of calcium-based minerals to a very soluble calcium oxide, which is removable using a mild acid solution, and the conversion of Fe minerals to relatively insoluble minerals such as hematite and magnetite. The pregnant leaching solution produced from the leaching of all SG fractions obtained from both coal sources was treated using two stages of solvent extraction procedurally modeling a rougher-cleaner circuit followed by oxalic acid precipitation. Rare earth oxide products having a purity greater than 97% was produced from nearly all of the SG fractions. A novel process flowsheet was developed based on the selective leaching of heavy REEs that was made possible through LTP treatment of West Kentucky No. 13 coarse refuse followed by salt leaching. In the flowsheet, coal refuse material is ground to a top size of 1mm and then treated by LTP. The treated material is mixed into a 0.1 M ammonium sulfate solution and then filtered to produce a heavy REE enriched pregnant leach solution. The heavy REEs are concentrated by two stages of selective precipitation to produce a heavy REE mix oxalate and then roasted to obtain a heavy REO mix concentrate. The solid residues remaining after salt leaching is dried and then subjected to HTO treatment followed by concentration using selective precipitation and roasting to produce a light REO mix concentrate. An alternative circuit was developed using HTO treatment only to treat 100% of the coarse refuse material followed by selective precipitation and roasting to generate a high purity REO mix product. A techno-economic analysis performed for the treatment of West Kentucky No. 13 and Fire Clay coarse refuse based on a hypothetical 500-tph plant revealed that the net present value for all scenarios was significantly negative. Primary reasons include: i) a substantial decrease in the basket value of the final product relative to the feed and ii) high chemical costs relative to the amount of product generated. The basket value reduction was primarily due to little to no scandium recovery due to poor leaching characteristics when using low acid concentrations as necessitated by the low feed grades. Operating costs were primarily influenced by the chemical costs relative to the kilograms of concentrate produced and feed grade. For the Fire Clay coarse refuse material, the total operating cost was estimated to be $354 per kg of REO produced which was higher than the basket value of the REO product ($276/kg). Approximately 37% of the total cost was the sulfuric acid used during the leaching process. A comparative analysis performed to assess the economic viability of using low-temperature plasma furnaces found that market value enhancement for the generation of both heavy REO and light REO concentrates will be needed in addition to significant technology advancements to reduce the cost of plasma furnaces.
01 COAL, LIGNITE, AND PEAT↗
Optimizing Cryo-Focused Pyrolysis GC/MS for Tracing Soil Organic Matter Across Diverse Ecosystems
The cycling of organic matter in terrestrial soils and sediments is central to a range of biogeochemical processes that regulate nutrient cycling, crop productivity, trace gas emissions, and contaminant transport. Pyrolysis-gas chromatography/mass spectrometry (py-GC/MS) is a powerful tool for characterizing bulk soil organic matter (SOM) at the molecular level. In this study, we used a cryo-focused py-GC/MS system to analyze soil samples from seven diverse ecosystems: vernal pool, prairie pothole, temperate forest, tropical forest, tundra, wildfire-affected boreal forest, and grassland. We addressed a key bottleneck in molecular-level SOM characterization by developing an automated data analysis pipeline to optimize py-GC/MS and complementary evolved gas analysis/mass spectrometry (EGA/MS) methods, incorporating advanced tools for peak deconvolution, developing a custom compound class library, and implementing fragmentation spectrum-based molecular networking for the first time. This improved workflow was applied to soil samples from all seven ecosystems, including multiple depths and density fractions. Our findings demonstrate that ecosystem type plays a dominant role in shaping compositional differences in SOM. We also identified trends in the source of SOM compounds (e.g., microbial vs plantderived) across soil depth and density fractions, which are critical for understanding persistence and turnover of SOM. Our molecular networking analysis indicated that although many compounds are widespread across ecosystems, others are restricted to specific environments, such as wetlands. This underscores the utility of molecular-level data in elucidating the complexity of SOM composition and the environmental drivers that shape it. Such molecular-level insights can deepen our knowledge of biogeochemical SOM cycles.
54 ENVIRONMENTAL SCIENCES↗
Climatic controls on soil and saprock nitrogen distribution and persistence in the Sierra Nevada
Nitrogen (N) is an essential nutrient in soil that regulates plant growth, terrestrial sequestration of atmospheric carbon dioxide, and persistence of organic compounds. However, major knowledge gaps remain about how climate change may impact N accumulation and persistence, especially in deep soil and saprock (friable weakly weathered bedrock). Our objective was to understand how climate impacts the accumulation of N in soil and saprock and how climate impacts soil N distribution, persistence, and mechanisms of N persistence. We investigated N concentration in bulk soil and density fractions. We estimated N persistence along a bio-climatic sequence—sites range from a low-elevation oak savannah, mid-elevation pine-oak/mixed-conifer forest, to a high-elevation subalpine forest—in the southern Sierra Nevada in California. A combination of radiocarbon and elemental composition measurements along with a first-order kinetic model was used. The N concentration in the bulk soil and density fractions declined with depth, and there was a relatively greater mineral-associated heavy fraction (HF) N in deeper samples. The cooler/wetter mixed conifer site held 37% of profile N in saprock, which was greater than that of the entire soil profile at the drier/hotter oak savannah. The majority of N in soil, which was in the HF, was not influenced by climate proxies tested. However, both unprotected and occluded fractions of N were strongly influenced by climate. Soil N mean residence time (MRT) showed that drier/hotter climates have a shorter MRT, compared to mid-elevation sites with cooler/wetter climates. The effect of climate on deep saprock N storage might be indirect, primarily through climatic influence on the thickness of saprock. Overall, our findings suggest the mineral-associated HF N pool will not be vulnerable to changes in climate and will continue to contribute to the persistent soil N pool. The amount of topsoil and subsoil unprotected and occluded N can be explained by gross primary productivity and mean annual precipitation indicating that changes in climate can influence N partitioning. N stored in deep soil and saprock may be less vulnerable to climate than N stored in drier/hotter climates with less deeply stored N. It is critical to dig deeper to understand terrestrial ecosystems’ response to climate.
58 GEOSCIENCES↗
Measurement Error and Resolution in Quantitative Stable Isotope Probing: Implications for Experimental Design
Quantitative stable isotope probing (qSIP) estimates isotope tracer incorporation into DNA of individual microbes and can link microbial biodiversity and biogeochemistry in complex communities. As with any quantitative estimation technique, qSIP involves measurement error, and a fuller understanding of error, precision, and statistical power benefits qSIP experimental design and data interpretation. We used several qSIP data sets—from soil and seawater microbiomes—to evaluate how variance in isotope incorporation estimates depends on organism abundance and resolution of the density fractionation scheme. We assessed statistical power for replicated qSIP studies, plus sensitivity and specificity for unreplicated designs. As a taxon’s abundance increases, the variance of its weighted mean density declines. Nine fractions appear to be a reasonable trade-off between cost and precision for most qSIP applications. Increasing the number of density fractions beyond that reduces variance, although the magnitude of this benefit declines with additional fractions. Our analysis suggests that, if a taxon has an isotope enrichment of 10 atom% excess, there is a 60% chance that this will be detected as significantly different from zero (with alpha 0.1). With five replicates, isotope enrichment of 5 atom% could be detected with power (0.6) and alpha (0.1). Finally, we illustrate the importance of internal standards, which can help to calibrate per sample conversions of %GC to mean weighted density. These results should benefit researchers designing future SIP experiments and provide a useful reference for metagenomic SIP applications where both financial and computational limitations constrain experimental scope.
59 BASIC BIOLOGICAL SCIENCES↗
Asymmetry between deuterium and tritium turbulent particle flows
The asymmetry between deuterium (D) and tritium (T) turbulent particle fluxes in mixed D–T plasmas is studied with numerical simulations of nonlinear gyrokinetic turbulence in ion temperature gradient-dominated and trapped electron mode-dominated regimes. At 50–50 D–T concentration, the asymmetry, or flow separation, between D and T fluxes is such that the tritium is better confined than the deuterium in both regimes. To supplement the nonlinear simulations, an analytic quasilinear theory of the particle flux symmetry breaking is developed and is valid for general electron dynamics. Furthermore, this theory correctly predicts the numerically computed deviation in the ion density fraction (from 50–50), or ion density gradient (from the electron gradient), required to restore equal deuterium and tritium fluxes.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Evidence linking calcium to increased organo-mineral association in soils
Geochemical indicators are emerging as important predictors of soil organic carbon (SOC) dynamics, but evidence concerning the role of calcium (Ca) is scarce. This study investigates the role of Ca prevalence in SOC accumulation by comparing otherwise similar sites with (CaCO 3 -bearing) or without carbonates (CaCO 3 -free). We measured the SOC content and indicators of organic matter quality (C stable isotope composition, expressed as δ 13 C values, and thermal stability) in bulk soil samples. We then used sequential sonication and density fractionation (DF) to separate two occluded pools from free and mineral-associated SOC. The SOC content, mass, and δ 13 C values were determined in all the fractions. X-ray photoelectron spectroscopy was used to investigate the surface chemistry of selected fractions. Our hypothesis was that occlusion would be more prevalent at the CaCO 3 -bearing site due to the influence of Ca on aggregation, inhibiting oxidative transformation, and preserving lower δ 13 C values. Bulk SOC content was twice as high in the CaCO 3 -bearing profiles, which also had lower bulk δ 13 C values, and more occluded SOC. Yet, contrary to our hypothesis, occlusion only accounted for a small proportion of total SOC (< 10%). Instead, it was the heavy fraction (HF), containing mineral-associated organic C, which accounted for the majority of total SOC and for the lower bulk δ 13 C values. Overall, an increased Ca prevalence was associated with a near-doubling of mineral-associated SOC content. Future investigations should now aim to isolate Ca-mediated complexation processes that increase organo-mineral association and preserve organic matter with lower δ 13 C values.
58 GEOSCIENCES↗
Shale as a Source of Organic Carbon in Floodplain Sediments of a Mountainous Watershed
Abstract Shales contain high levels of organic carbon (OC) and represent a large fraction of the Earth's reduced carbon stocks. While recent evidence suggests that shale‐derived OC may be actively cycled in riverine systems, this process is poorly understood and not currently considered in global C models. Through the use of sediment density fractionations, extractions, radiocarbon measurements, and chemical characterization, we provide information on the abundance, chemistry, and mobility of shale‐derived OC in floodplain sediments of a shale‐rich mountainous watershed. The heavy fraction of the sediment, representing mineral‐associated OC, is the largest (84 ± 6% of TOC) and oldest (Δ 14 C values −224 to −853‰) OC pool. Evidence of shale‐derived OC is observed in all sediment C pools (i.e., occluded light fraction, water‐soluble, and pyrophosphate‐extractable) except the free light fraction, which is entirely modern. Relatively consistent chemistry was observed across samples for extracted and density‐separated OC, despite wide ranges of Δ 14 C values. Carbon spectroscopy revealed that floodplain sediments had a higher degree of functionalized aromatic groups and lower carbonate content compared to shale collected nearby, consistent with chemical alteration and mixing with other C sources in the floodplain. We estimate that approximately 23–34% of sediment OC is derived from shale, with implications for other shale‐derived elements (e.g., N). This study demonstrates the important contribution of shale‐OC, particularly in environments with low litter inputs. The large impact of radiocarbon‐dead shale‐OC, which has a thermally altered chemical structure distinct from plant litter, on Δ 14 C values and reactivity of sediment‐OC must be considered.
Fox, Patricia M.↗
Edge-localized mode mitigation enabled by active control of pedestal density gradient with new EAST tokamak divertor
Mitigation of large edge-localized modes (ELMs) has been achieved by actively reducing the pedestal density gradient with the EAST new right-angled lower divertor through changing the strike point position from the vertical target to the horizontal target. A series of dedicated experiments in the 2021–2024 EAST campaigns demonstrate that this ELM control solution is highly reproducible in a broad parameter space of edge safety factor q 95 = 4.7–7.1, heating power P total = 2.3–5 MW, and pedestal collisionality $ν_{e,ped}^{*}$ = 1–6, under both favorable and unfavorable magnetic configurations. Higher plasma density could facilitate the achievement of this ELM control solution. Statistical results indicate that the ELM mitigation effect can be observed at relatively larger Greenwald density fraction of f GW > 0.47. In addition, this ELM mitigation effect can be achieved with both lithium-coated and boronized metal walls. The pedestal density gradient is systematically lower in the horizontal target case than that of the vertical target case when the ELM mitigation effect can be observed. SOLPS-ITER simulation results indicate that the pedestal fueling from divertor recycling is significantly lower in the horizontal target case. This could contribute to the formation of a flattened pedestal density profile with small ELMs.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Radiocarbon of soil CO2 efflux and soils with experimental soil warming and drying in lowland tropical forests in Panama
In 2019, we measured the Δ14C and δ13C of soil respired carbon dioxide (CO2) in Panamanian forests that are subject to either in situ experimental soil warming (4C above ambient temperature to 1.2 m depth) or in situ experimental drying (50% throughfall exclusion). The warming site and one drying site are both within the Barro Colorado Nature Monument in nearby and similar forests on similar soils, enabling direct comparison of warming and drying effects on soil CO2 efflux. A second drying experiment is on the northern side of the Panama Isthmus on infertile soils where mean annual precipitation is greater, representative of a broad geographic area of the tropics. Given the seasonality of these forests, we performed measurements at stages of the seasonal cycle for which we expected the largest variation in CO2 efflux between control and experimental plots based on previous studies – the wet season (October-December) and dry season (March/April) or dry-to-wet season transition (May). This dataset includes Δ14C and δ13C of in situ soil surface CO2 flux as well as CO2 flux rates, volumetric soil moisture, soil temperature, and calculated partitioning of the fraction of total soil respiration from heterotrophs vs roots at the time of isotope sampling in AllSites_SoilResp_14C_data.xlsx. This dataset also includes Δ14C and δ13C of bulk soil, density fractions, and CO2 respired during laboratory incubations in AllSites_bulk_soil14C.xlsx. Datafiles are also available in csv format.
54 ENVIRONMENTAL SCIENCES↗