Search NASA⌕ Search

SEARCH · Search NASA

Results for “DiTTo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Distributed Thrust Takeoff for the NASA X-57 Mod IV Flight Demonstrator

The Mod IV configuration of the X-57 flight demonstrator concept featured two forms of distributed electric propulsion—one cruise propulsor at each wingtip for primary propulsion that enabled favorable interaction with the wingtip vortex, and six high-lift propulsors distributed along the leading edge of each wing to enhance low-speed flight characteristics. The power system that fed these propulsors was arranged in two independent power buses. This unique arrangement did not lend itself to traditional “one engine inoperative” methods for determining performance after a critical failure in the propulsion system. Several potential failure scenarios were identified as potential “critical loss of thrust” events, and experiments that included pilot-in-the-loop simulation with the project test pilots were conducted to determine if these events would result in adequate handling and performance. Prior research showed that a total failure of one of the cruise motors during takeoff or initial climb could result in unacceptable performance for a traditional full-power takeoff. A new technique dubbed Distributed Thrust Takeoff (DiTTo) was developed to reduce the impact of the thrust asymmetry and total loss of thrust that could occur in any of the critical loss of thrust scenarios. The results showed that adequate performance and handling qualities could be achieved in each of the critical failure scenarios when using the DiTTo technique.

Distributed Propulsion, Electric Propulsion, Criti↗

Distributed Thrust Takeoff for the NASA X-57 Mod IV Flight Demonstrator

The Mod IV configuration of the X-57 flight demonstrator concept featured two forms of distributed electric propulsion—one cruise propulsor at each wingtip for primary propulsion that enabled favorable interaction with the wingtip vortex, and six high-lift propulsors distributed along the leading edge of each wing to enhance low-speed flight characteristics. The power system that fed these propulsors was arranged in two independent power buses. This unique arrangement did not lend itself to traditional “one engine inoperative” methods for determining performance after a critical failure in the propulsion system. Several potential failure scenarios were identified as potential “critical loss of thrust” events, and experiments that included pilot-in-the-loop simulation with the project test pilots were conducted to determine if these events would result in adequate handling and performance. Prior research showed that a total failure of one of the cruise motors during takeoff or initial climb could result in unacceptable performance for a traditional full-power takeoff. A new technique dubbed Distributed Thrust Takeoff (DiTTo) was developed to reduce the impact of the thrust asymmetry and total loss of thrust that could occur in any of the critical loss of thrust scenarios. The results showed that adequate performance and handling qualities could be achieved in each of the critical failure scenarios when using the DiTTo technique.

Distributed Propulsion↗

Primary Objective Grating Astronomical Telescope

It has been 370 years since a seventeenth century French mathematician, Mersenne, presciently sketched out an astronomical telescope based on dual parabolic reflectors. Since that time the concept of the primary objective has been virtually unchanged. Now a new class of astronomical telescope with a primary objective grating (POG) has been studied as an alternative. The POG competes with mirrors, in part, because diffraction gratings provide the very chromatic dispersion that mirrors defeat. The resulting telescope deals effectively with long-standing restrictions on multiple object spectroscopy (MOS). Other potential benefits include unprecedented apertures and collection areas. The new design also favors space deployment as a gossamer membrane. The inventor, Tom Ditto, first discovered that higher-order diffraction images contain hidden depth cues, for which he was granted a seminal range finding patent in 1987. Subsequently, he invented and patented 3D localizers, profilometers and microscopes using POGs. The POG telescope was placed in the public domain to expedite research. The function of a telescopes primary objective is to collect flux and to deliver images. Both functions dictate that size matters, and bigger is better. For that reason, there has been a steady push over the past century to ramp up the size of the primary mirror. However, for every doubling of mirror diameter, the elapsed time between initial effort and first light has also doubled. Meanwhile, costs escalated beyond the mirror alone, because larger instruments required larger enclosures and better pointing mechanisms. One key catalog of observation, spectrographic data, is far more difficult to amass than two-dimensional imagery. While the number of observable objects has increased with mirror size, the capacity to take spectra has not increased proportionately. In the best of circumstances, spectrograms are available for one per cent of the all objects surveyed. Spectroscopy was a historical afterthought introduced in the nineteenth century shortly after the invention of the diffraction grating and over a century after Newtons 1670 telescope. Spectroscopy is generally accomplished using a diffraction grating as the disperser in the secondary. The light being delivered to the spectrograph is first captured by a primary mirror which provides no chromatic magnification by itself. Sizeable spectrographs could not be deployed while diffraction gratings were rare commodities scribed using mechanical ruling engines that produced one grating line at a time. Today diffraction gratings are commonplace. Their recent availability is a product of both the invention of holography and the mass replication of surface microstructures. Holography permits all lines in a grating to be made simultaneously in a single photographic exposure. Holograms can then be reproduced by embossing processes. The improvement in replication is analogous to how Gutenberg changed the availability of books. The masters may be expensive, but the copies are not. Computer science is another technology that emerged in the second half of the twentieth century without which our proposed spectrographic instrument could not function due to the complexity of image processing required in data reduction. The employment of very large diffraction gratings as primary objectives for astronomical telescopes requires a novel

spectroscopy↗

Distribution System Dataset Generator for AI Applications [SWR-24-75]

This software is a simple, light-weight python package to generate pytorch compatible machine learning graph dataset representing electric power distribution system. User is able to use these graph datasets to test their graph generation artificial intelligence (AI) models, link prediction AI models, graph classification AI models and so much more. This package uses grid-data-models (https://github.com/NREL-Distribution-Suites/grid-data-models) as input data format for power distribution system. NREL-Ditto (https://github.com/NREL-Distribution-Suites/ditto) tool can be leveraged to transform popular distribution system file formats such as opendss, cyme and synergi to grid-data-models.

Duwadi, Kapil↗

The TSO Logic and G2 Software Product

This internship assignment for spring 2014 was at John F. Kennedy Space Center (KSC), in NASAs Engineering and Technology (NE) group in support of the Control and Data Systems Division (NE-C) within the Systems Hardware Engineering Branch. (NEC-4) The primary focus was in system integration and benchmarking utilizing two separate computer software products. The first half of this 2014 internship is spent in assisting NE-C4s Electronics and Embedded Systems Engineer, Kelvin Ruiz and fellow intern Scott Ditto with the evaluation of a newly piece of software, called G2. Its developed by the Gensym Corporation and introduced to the group as a tool used in monitoring launch environments. All fellow interns and employees of the G2 group have been working together in order to better understand the significance of the G2 application and how KSC can benefit from its capabilities. The second stage of this Spring project is to assist with an ongoing integration of a benchmarking tool, developed by a group of engineers from a Canadian based organization known as TSO Logic. Guided by NE-C4s Computer Engineer, Allen Villorin, NASA 2014 interns put forth great effort in helping to integrate TSOs software into the Spaceport Processing Systems Development Laboratory (SPSDL) for further testing and evaluating. The TSO Logic group claims that their software is designed for, monitoring and reducing energy consumption at in-house server farms and large data centers, allows data centers to control the power state of servers, without impacting availability or performance and without changes to infrastructure and the focus of the assignment is to test this theory. TSOs Aaron Rallo Founder and CEO, and Chris Tivel CTO, both came to KSC to assist with the installation of their software in the SPSDL laboratory. TSOs software is installed onto 24 individual workstations running three different operating systems. The workstations were divided into three groups of 8 with each group having its own operating system. The first group is comprised of Ubuntus Debian -based Linux the second group is windows 7 Professional and the third group ran Red Hat Linux. The highlight of this portion of the assignment is to compose documentation expressing the overall impression of the software and its capabilities.

TSO Logic↗

Defects in Layered van der Waals Heterostructures: Implications for Thermoelectrics

Layered van der Waals heterostructures provide extraordinary opportunities for applications such as thermoelectrics and allow for tunability of optical and electronic properties. The performance of devices made from these heterostructures will depend on their properties, which are sensitive to the nanoarchitecture (constituent layer thicknesses, layer sequence, etc.). However, performance will also be impacted by defects, which will vary in concentration and identity with the nanoarchitecture and preparation conditions. Here, we identify several types of defects and propose mechanisms for their formation, focusing on compounds in the ([SnSe] 1+δ ) m (TiSe 2 ) n system prepared using the modulated elemental reactants method. The defects were observed by atomic resolution high-angle annular dark-field scanning transmission electron microscopy and can be broadly categorized into those that form domain boundaries as a result of rotational disorder from the self-assembly process and those that are layer-thickness-related and result from local or global deviations in the amount of material deposited. Furthermore, defect type and density were found to depend on the nanoarchitecture of the heterostructure. Categorizing the defects provides insights into defect formation in these van der Waals layered heterostructures and suggests strategies for controlling their concentrations. Strategies for controlling defect type and concentration are proposed, which would have implications for transport properties for applications in thermoelectrics.

36 MATERIALS SCIENCE↗

Improving Grid Awareness by Empowering Utilities with Machine Learning and Artificial Intelligence

Gap filling time series data typically depends on linear interpolation. More recently gap filling advancements include machine learning techniques. However, none leverage advanced learning approach that uses cohort training or a neighborhood informed approach, which is described in this report. The report also describes a physics informed approach using Reduced Order Models (ROM). There are several methods to capture the nature of the detailed system in aggregated models, however there is a trade-off for these methods developed for multiple applications. These methods have specific requirements and applications that includes consideration of dynamics or covering a larger range of operating conditions, etc. The various methods of aggregation are: 1) Thevenin equivalents for downstream networks 2) Equivalent feeder representation to capture downstream network losses accurately 3) Structured reduced order models for dynamics 4) System identification-based ROM (abstract dynamical model) Methods described in items 1 and 2 above are ideal for steady-state models and useful for this application. Of these two methods, based on the data availability, the targeted application, the reduced order model that is proposed to be developed is the equivalent feeder model representation. This includes a structure of the reduced order model whose parameters can be determined by the system load and losses with the meter measurements.

14 SOLAR ENERGY↗

Product ion distributions using H 3 O + proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS): mechanisms, transmission effects, and instrument-to-instrument variability

Abstract. Proton-transfer-reaction mass spectrometry (PTR-MS) using hydronium ion (H3O+) ionization is widely used for the measurement of volatile organic compounds (VOCs) both indoors and outdoors. H3O+ ionization, as well as the associated chemistry in an ion–molecule reactor, is known to generate product ion distributions (PIDs) that include other product ions besides the proton-transfer product. We present a method, using gas-chromatography pre-separation, for quantifying PIDs from PTR-MS measurements of nearly 100 VOCs of different functional types including alcohols, ketones, aldehydes, acids, aromatics, organohalides, and alkenes. We characterize instrument configuration effects on PIDs and find that reactor reduced electric field strength (E/N), ion optic voltage gradients, and quadrupole settings have the strongest impact on measured PIDs. Through an interlaboratory comparison of PIDs measured from calibration cylinders, we characterized the variability of PID production from the same model of PTR-MS across seven participating laboratories. Product ion variability was generally smaller (e.g., < 20 %) for ions with larger contributions to the PIDs (e.g., > 0.30) but less predictable for product ions formed through O2+ and NO+ reactions. We present a publicly available library of H3O+ PTR-MS PIDs that will be updated periodically with user-provided data for the continued investigation into instrument-to-instrument variability of PIDs.

Link, Michael F. (ORCID:0000000218412455)↗

Collected Papers on Instability of Shell Structures - 1962

Shell structures are important components of airplanes, missiles, and space vehicles, but present capabilities for predicting the local and general instability of many such structures are inadequate. A large effort continues to be devoted to the stability analysis of shell structures, and considerable progress has been made. Results are slowly disseminated, however, and many engaged in research are not fully cognizant of the problems and practices of the vehicle designers who utilize research results. Therefore, an NASA SYMPOSIUM ON INSTABILITY OF SKELL STRUCTURES was organized by the Langley Research Center with sessions held there on October 24 and 25, 1962. Participants were limited to persons contributing papers and to certain officials of the U.S. Government. This symposium was planned to provide those persons concerned with shell instability at research laboratories, at educational institutions, and in the aerospace industry with a comprehensive view of the present state of the art, including the voids in present knowledge, important current problems, and the most fruitful directions for future theoretical and experimental research on the instability of all types of shell structures. Individuals actively engaged in research on shell stability or design were invited to contribute written papers for inclusion in a compilation to be distributed to the participants prior to the symposium. A few papers were selected by a steering committee for oral presentation at the symposium. Provision was made, also, for a discussion of all papers.

MISSILE↗

DEVELOPMENT OF DESIGN STRENGTH LEVELS FOR THE ELASTIC STABILITY OF MONOCOQUE CONES UNDER AXIAL COMPRESSION

Design relationships have been derived for the determination of elastic buckling strength levels for unpressurized monocoque truncated cones under axial compression. Theoretical implications have been considered in the establishment of a semi-empirical analysis leading to the development of probability based design expressions. Data from 170 tests by various investigators were statistically evaluated for the expected mean, 90%, and 99% probability strength levels. Dispersion of data was found to be slightly less than that of monocoque cylinders. Non-linear effects of radius to thickness ratio or strength deterioration with length to radius ratio were not discernible.

AXIAL COMPRESSION↗

Presentation Annotated

This Report is not the latest word on an old idea but the first word on a new one. The new idea reverses the old one, the axiom that the best primary objective for an astronomical telescope exhibits the least chromatic aberration. That axiomatic distinction goes back to a young Isaac Newton who knew from experiments with prisms and mirrors in the 1660's that magnification with a reflection primary was completely free of the dispersion he saw with refraction. The superiority of reflection primary objectives for eyeball or photographic viewing is now considered obvious. It was this piece of wisdom on achromatic primary objectives that led to the dominance of the parabolic mirror as the means to collect star light. Newton was aware of the problem when he introduced his telescope to the scientific world in 1670.This Report is not the latest word on an old idea but the first word on a new one. The new idea reverses the old one, the axiom that the best primary objective for an astronomical telescope exhibits the least chromatic aberration. That axiomatic distinction goes back to a young Isaac Newton who knew from experiments with prisms and mirrors in the 1660's that magnification with a reflection primary was completely free of the dispersion he saw with refraction. The superiority of reflection primary objectives for eyeball or photographic viewing is now considered obvious. Actually, Newton's design innovation was in a secondary mirror, a plane mirror far more easily fabricated than Gregory's embodiment of 1663 which required two curved mirrors.

Astronomical telescope↗

HOMES: Holographic Method for Exoplanet Spectroscopy

The search for habitable exoplanets in the "neighborhood," that is within 10 parsecs (pc),invites new observational techniques, because telescopes available today have significant limitations. For example, gravitational micro-lensing is a deep field method that has little or no utility within 10 pc. Photometry of transits reduces the availability of exoplanets to a probability of approximately a 1%, and fewer than 1 out of 100 earth twins would ever be seen. For the 1% of exoplanets seen in transit, spectra of albedos cannot be taken.Even more limiting, Doppler shift studies are indirect and cannot characterize exoplanets other than by their orbits and masses through stellar radial velocity (RV). Moreover, RV by Doppler shift cannot detect planets in orbits on a plane perpendicular to our line of sight. Astrometry can be used to measure stellar orbital wobble for those exoplanetary systems in the plane perpendicular to our line of sight, as was contemplated for the cancelled NASA SIM mission 1 and rests now with ESA's GAIA2. In either case, the exoplanets detected by stellar RV or astrometry would not be directly observed, so the assumption that the three phases of water could exist does not answer a key question of habitability. Is there water on the exoplanet? Moreover, the discovery of water on an exoplanet in the habitable zone, exciting though it would be, is insufficient to determine just how habitable the exoplanet might possibly be. Like Goldilocks' porridge - there are many other ingredients beyond water alone in a life-sustaining soup.We propose a new species of optical telescope that has as one of its capabilities the high resolution spectrographic characterization of exoplanets on stars within 10 pc of the observatory. To achieve this performance specification, we propose to break with convention by taking advantage of an optical technology unknown until relatively recent times: the hologram. In this Report we show how holograms used in primary and secondary can extract spectrograms from exoplanets at distances reaching 33 light years from our solar system. We describe a notional space telescope using these novel optics that could make its observations in a space deployment scenario.

Ditto, Thomas↗

Cryo nanomanipulator probe with integrated gas injection

A probe assembly for use with a charged particle instrument includes an elongate body having a proximal end for positioning outside of a charged particle instrument enclosed environment, a distal end for positioning within the enclosed environment and a longitudinal axis. A port interface is located on the body between the proximal and distal ends, and is coupleable to a nanomanipulator system of the charged particle instrument. A probe needle is positioned at a distal end of the body and is selectively positionable from outside the enclosed environment to contact a specimen within the enclosed environment. At least one gas injection needle is adjustably positioned near the probe needle. The gas injection needle is connectable to a source of pressurized gas to selectively inject gas in the area of the probe needle within the enclosed environment.

Perea, Daniel E.↗