Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dimensionality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

High-Field One-Dimensional and Two-Dimensional 27Al Magic-Angle Spinning Nuclear Magnetic Resonance Study of ?-, d-, and ?-Al2O3 Dominated Aluminum Oxides: Toward Understanding the Al Sites in ?-Al2O3

Herein, a detailed analysis was carried out using high-field (19.9 T) 27Al magic-angle spinning (MAS) nuclear magnetic resonance (NMR) on three specially prepared aluminum oxide samples where the ?-, d-, and ?-Al2O3 phases are dominantly expressed through careful control of the synthesis conditions. Specifically, two-dimensional (2D) multiquantum (MQ) MAS 27Al was used to obtain high spectral resolution, which provided a guide for analyzing quantitative 1D 27Al NMR spectra. Six aluminum sites were resolved in the 2D MQ MAS NMR spectra, and seven aluminum sites were required to fit the 1D spectra. A set of octahedral and tetrahedral peaks with well-defined quadrupolar line shapes was observed in the ?-phase dominant sample and was unambiguously assigned to the ?-Al2O3 phase. The distinct line shapes related to the ?-Al2O3 phase provided an opportunity for effectively deconvoluting the more complex spectrum obtained from the d-Al2O3 dominant sample, allowing the peaks/quadrupolar parameters related to the d-Al2O3 phase to be extracted. The results show that the d-Al2O3 phase contains three distinct AlO sites and three distinct AlT sites. This detailed Al site structural information offers a powerful way of analyzing the most complex ?-Al2O3 spectrum. It is found that the ?-Al2O3 phase consists of Al sites with local structures similar to those found in the d-Al2O3 and ?-Al2O3 phases albeit with less ordering. Spin–lattice relaxation time measurement further confirms the disordering of the lattice. Collectively, this study uniquely assigns 27Al features in transition aluminas, offering a simplified method to quantify complex mixtures of aluminum sites in transition alumina samples.

Xu, Suochang↗
DOE OSTI2025

Long‐Term Large‐Scale Atmospheric Forcing Data From Three‐Dimensional Constrained Variational Analysis for the ARM SGP Site

Here, this study presents a long‐term three‐dimensional large‐scale forcing data set (VARANAL3D) derived from the three‐dimensional constrained variational analysis (3DCVA) method at the Atmospheric Radiation Measurement (ARM) program Southern Great Plains (SGP) site from 2004 to 2018. Building on the same input data sets as the conventional continuous forcing data set (VARANAL), VARANAL3D maintains overall consistency in domain‐averaged fields while introducing spatial variability, offering critical insights into the influence of mesoscale synoptic systems on cloud‐related processes. Evaluations are conducted across four cloud and precipitation regimes: Clear‐sky, Shallow‐clouds, Afternoon‐precipitation, and Nocturnal‐precipitation, presenting high consistency of the domain‐mean forcing data sets while emphasizing the role of subdomain forcing variability particularly in precipitating regimes. Single column model (SCM) simulations demonstrate that subdomain VARANAL3D forcing improves cloud and precipitation representation, with the ensemble outperforming domain‐mean forcing in three cloudy and precipitating regimes. Overall, these results highlight VARANAL3D's value for investigating the impacts of spatial variability of large‐scale forcing on atmospheric processes. The VARANAL3D data set provides new opportunities for evaluating model physics, advancing the development of scale‐aware parameterizations and deepening our understanding of cloud and precipitation dynamics.

Environmental sciences↗
DOE OSTI2021

From Three-Dimensional Clathrates to Two-Dimensional Zintl Phases AMSb 2 (A = Rb, Cs; M = Ga, In) Composed of Pentagonal M–Sb Rings

Three new antimonide Zintl phases, RbGaSb 2 , CsGaSb 2 , and CsInSb 2 , were discovered during exploration of corresponding A–M–Sb (A = Rb, Cs; M = Ga, In) ternary systems while searching for new clathrates. The AGaSb 2 phases crystallize in the tetragonal space group P4 2 /nmc (No. 137) in the LiBS 2 structure type, while CsInSb 2 crystallizes in lower symmetry in the orthorhombic space group Cmce (No. 64) in the KGaSb 2 structure type with additional disorder of one of the Cs sites. The crystal structures of all three reported AMSb 2 compounds are composed of two-dimensional [MSb 2 ] – tetrahedral layers separated by Rb + or Cs + cations. [MSb 2 ] – layers are built from fused M–Sb pentagons and hexagons, which are also the main structural units for A 8 M 27 Sb 19 clathrate cages. The semiconductor nature of AMSb 2 was suggested by band structure calculations and confirmed by transport property characterization. CsGaSb 2 is a rare example of an n-type pnictide Zintl phase. Finally, all reported compounds exhibit low thermal conductivity typical for complex antimonides of heavy elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dimensionality crossover to a two-dimensional vestigial nematic state from a three-dimensional antiferromagnet in a honeycomb van der Waals magnet

The effects of fluctuations and disorder, which are substantially enhanced in reduced dimensional-ities, can play a crucial role in producing nontrivial phases of matter such as vestigial orders char-acterized by a composite order parameter. However, fluctuation-driven magnetic phases in low dimensions have remained relatively unexplored. Here we demonstrate a phase transition from the zigzag antiferromagnetic order in the three-dimensional bulk to a Z 3 vestigial Potts-nematicity in two-dimensional few-layer samples of van der Waals magnet NiPS 3 . Our spin relaxometry and op-tical spectroscopy measurements reveal that the spin fluctuations are enhanced over the gigahertz to terahertz range as the layer number of NiPS 3 reduces. Monte Carlo simulations corroborate the experimental finding of 3-fold rotational symmetry breaking, but show that translational symmetry is restored in thin layers of NiPS 3 . Furthermore, our results show that strong quantum fluctuations can stabilize an unconventional magnetic phase after destroying a more conventional one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Correlating the three-dimensional atomic defects and electronic properties of two-dimensional transition metal dichalcogenides

The electronic, optical and chemical properties of two-dimensional transition metal dichalcogenides strongly depend on their three-dimensional atomic structure and crystal defects. Using Re-doped MoS 2 as a model system, here we present scanning atomic electron tomography as a method to determine three-dimensional atomic positions as well as positions of crystal defects such as dopants, vacancies and ripples with a precision down to 4 pm. We further measure the three-dimensional bond distortion and local strain tensor induced by single dopants. By directly offering these experimental three-dimensional atomic coordinates to density functional theory, we obtain more accurate electronic band structures than derived from conventional density functional theory calculations that relies on relaxed three-dimensional atomic coordinates. We anticipate that scanning atomic electron tomography not only will be generally applicable to determine the three-dimensional atomic coordinates of two-dimensional materials, but also will enable ab initio calculations to better predict the physical, chemical and electronic properties of these materials.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Simple Two-Dimensional Corrections for One-Dimensional Pulse Tube Models

One-dimensional oscillating flow models are very useful for designing pulse tubes. They are simple to use, not computationally intensive, and the physical relationship between temperature, pressure and mass flow are easy to understand when used in conjunction with phasor diagrams. They do not possess, however, the ability to directly calculate thermal and momentum diffusion in the direction transverse to the oscillating flow. To account for transverse effects, lumped parameter corrections, which are obtained though experiment, must be used. Or two-dimensional solutions of the differential fluid equations must be obtained. A linear two-dimensional solution to the fluid equations has been obtained. The solution provides lumped parameter corrections for one-dimensional models. The model accounts for heat transfer and shear flow between the gas and the tube. The complex Nusselt number and complex shear wall are useful in describing these corrections, with phase relations and amplitudes scaled with the Prandtl and Valensi numbers. The calculated ratio, a, between a two-dimensional solution of the oscillating temperature and velocity and a one-dimensional solution for the same shows a scales linearly with Va for Va less than 30. In this region alpha less than 0.5, that is, the enthalpy flow calculated with a two-dimensional model is 50% of a calculation using a one-dimensional model. For Va greater than 250, alpha = 0.8, showing that diffusion is still important even when it is confined to a thing layer near the tube wall.

Lee, J. M.↗
NASA NTRS2007

The Art of Extracting One-Dimensional Flow Properties from Multi-Dimensional Data Sets

The engineering design and analysis of air-breathing propulsion systems relies heavily on zero- or one-dimensional properties (e:g: thrust, total pressure recovery, mixing and combustion efficiency, etc.) for figures of merit. The extraction of these parameters from experimental data sets and/or multi-dimensional computational data sets is therefore an important aspect of the design process. A variety of methods exist for extracting performance measures from multi-dimensional data sets. Some of the information contained in the multi-dimensional flow is inevitably lost when any one-dimensionalization technique is applied. Hence, the unique assumptions associated with a given approach may result in one-dimensional properties that are significantly different than those extracted using alternative approaches. The purpose of this effort is to examine some of the more popular methods used for the extraction of performance measures from multi-dimensional data sets, reveal the strengths and weaknesses of each approach, and highlight various numerical issues that result when mapping data from a multi-dimensional space to a space of one dimension.

Baurle, R. A.↗
NASA NTRS2007

The Extraction of One-Dimensional Flow Properties from Multi-Dimensional Data Sets

The engineering design and analysis of air-breathing propulsion systems relies heavily on zero- or one-dimensional properties (e.g. thrust, total pressure recovery, mixing and combustion efficiency, etc.) for figures of merit. The extraction of these parameters from experimental data sets and/or multi-dimensional computational data sets is therefore an important aspect of the design process. A variety of methods exist for extracting performance measures from multi-dimensional data sets. Some of the information contained in the multi-dimensional flow is inevitably lost when any one-dimensionalization technique is applied. Hence, the unique assumptions associated with a given approach may result in one-dimensional properties that are significantly different than those extracted using alternative approaches. The purpose of this effort is to examine some of the more popular methods used for the extraction of performance measures from multi-dimensional data sets, reveal the strengths and weaknesses of each approach, and highlight various numerical issues that result when mapping data from a multi-dimensional space to a space of one dimension.

Baurle, Robert A.↗
DOE OSTI2023

Dimensionality-driven metal to Mott insulator transition in two-dimensional 1T-TaSe2

Abstract Two-dimensional materials represent a major frontier for research into exotic many-body quantum phenomena. In the extreme two-dimensional limit, electron-electron interaction often dominates over other electronic energy scales, leading to strongly correlated effects such as quantum spin liquid and unconventional superconductivity. The dominance is conventionally attributed to the lack of electron screening in the third dimension. Here, we discover an intriguing metal to Mott insulator transition in 1T-TaSe2 that defies conventional wisdom. Specifically, we find that dimensionality crossover, instead of reduced screening, drives the transition in atomically thin 1T-TaSe2. A dispersive band crossing the Fermi level is found to be responsible for the bulk metallicity in the material. Reducing the dimensionality, however, effectively quenches the kinetic energy of these initially itinerant electrons, and drives the material into a Mott insulating state. The dimensionality-driven metal to Mott insulator transition resolves the long-standing dichotomy between metallic bulk and insulating surface of 1T-TaSe2. Our work further reveals a new pathway for modulating two-dimensional materials that enables exploring strongly correlated systems across uncharted parameter space.

1T-TaSe2↗
DOE OSTI2021

Three-dimensional atomic packing in amorphous solids with liquid-like structure

Liquids and solids are two fundamental states of matter. However, our understanding of their three-dimensional atomic structure is mostly based on physical models. Here we use atomic electron tomography to experimentally determine the three-dimensional atomic positions of monatomic amorphous solids, namely a Ta thin film and two Pd nanoparticles. We observe that pentagonal bipyramids are the most abundant atomic motifs in these amorphous materials. Instead of forming icosahedra, the majority of pentagonal bipyramids arrange into pentagonal bipyramid networks with medium-range order. Molecular dynamics simulations further reveal that pentagonal bipyramid networks are prevalent in monatomic metallic liquids, which rapidly grow in size and form more icosahedra during the quench from the liquid to the glass state. Furthermore, these results expand our understanding of the atomic structures of amorphous solids and will encourage future studies on amorphous–crystalline phase and glass transitions in non-crystalline materials with three-dimensional atomic resolution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Signatures of two-dimensional superconductivity emerging within a three-dimensional host superconductor

Significance We report signatures of a new phenomenon wherein a hidden “interdimensional” order emerges from a bulk three-dimensional superconductor tuned to approach a phase transition to an insulator. Prior electrical transport measurements found that the superconductor–insulator transition of BaPb 1− x Bi x O 3 demonstrated critical scaling behavior but inexplicably required parameters consistent only with two dimensions. Here, we directly image the three-dimensional superconducting state as it approaches an insulating phase and discover that signatures of a two-dimensional granular superconducting phase spontaneously emerge at the transition. Moreover, the properties of this phase precisely match the theory of emergent electronic granularity specific to two-dimensional materials. These findings posit that a three-dimensional superconductor electronically reorganizes itself into a two-dimensional granular superconductor before ultimately transforming to an insulator.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1978

Concerning isothermal self-similar blast waves. I - One-dimensional flow and its stability. II - Two-dimensional flow and its stability

One-dimensional self-similar isothermal flow behind a blast wave propagating in a medium whose density varies with distance is investigated for the cases of one-dimensional and two-dimensional flow. The isothermal flow model is adopted as an alternative to adiabatic models of self-similar flow, which neglect heat flux. The topology of the one-dimensional flow solutions, the singularities, and the influence of boundary conditions are discussed; the instability of the isothermal blast waves against nonself-similar perturbations is also considered. The number of critical points in the two-dimensional solutions is found to vary from the number in the one-dimensional problem.

Lerche, I.↗
DOE OSTI2021

The collapse and three-dimensional explosion of three-dimensional massive-star supernova progenitor models

ABSTRACT The explosion outcome and diagnostics of core-collapse supernovae depend sensitively on the nature of the stellar progenitor, but most studies to date have focused exclusively on one-dimensional, spherically symmetric massive star progenitors. We present some of the first core-collapse supernovae simulations of three-dimensional massive star supernovae progenitors, a 12.5- and a 15-M⊙ model, evolved in three dimensions from collapse to bounce through explosion with the radiation-hydrodynamic code fornax. We compare the results using those starting from three-dimensional progenitors to three-dimensional simulations of spherically symmetric, one-dimensional progenitors of the same mass. We find that the models evolved in three dimensions during the final stages of massive star evolution are more prone to explosion. The turbulence arising in these multidimensional initial models serves as seed turbulence that promotes shock revival. Detection of gravitational waves and neutrinos signals could reveal signatures of pre-bounce turbulence.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1984

Two-dimensional optical processing using one-dimensional input devices

Two-dimensional optical processing architectures that are implemented with one-dimensional input spatial light modulators are reviewed. The advanced state of the art of available one-dimensional devices and the flexibility that exists in the design of two-dimensional architectures with one-dimensional transducers leads to the implementation of the most powerful and versatile optical processors. Signal and image processing architectures of this type are discussed.

Psaltis, D.↗
DOE OSTI2025

Sharp detection of low-dimensional structure in probability measures via dimensional logarithmic Sobolev inequalities

Identifying low-dimensional structure in high-dimensional probability measures is an essential pre-processing step for efficient sampling. To identify this structure, we approximate the target measure as a perturbation of an arbitrary reference measure along a few directions in $\mathbb{R}^{d}$. These directions are determined by minimizing an upper bound on the Kullback–Leibler (KL) divergence between the target and its approximation. Our contribution improves upon previous works by leveraging dimensional logarithmic Sobolev inequalities to refine the bound on the KL divergence. These inequalities lead to a uniformly tighter bound on the KL divergence, thereby enhancing the identification of the most significant perturbation directions. In particular, when the target and reference are both Gaussian, minimizing the resulting bound is equivalent to minimizing the KL divergence. We further demonstrate the applicability of this analysis to the squared Hellinger distance, where analogous reasoning shows that the dimensional Poincaré inequality offers improved bounds.

Bayesian inference↗