Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct inelastic scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Inelastic and reactive scattering of hyperthermal atomic oxygen from amorphous carbon

The reaction of hyperthermal oxygen atoms with an amorphous carbon-13 surface was studied using a modified universal crossed molecular beams apparatus. Time-of-flight distributions of inelastically scattered O-atoms and reactively scattered CO-13 and CO2-13 were measured with a rotatable mass spectrometer detector. Two inelastic scattering channels were observed, corresponding to a direct inelastic process in which the scattered O-atoms retain 20 to 30 percent of their initial kinetic energy and to a trapping desorption process whereby O-atoms emerge from the surface at thermal velocities. Reactive scattering data imply the formation of two kinds of CO products, slow products whose translational energies are determined by the surface temperature and hyperthermal (Approx. 3 eV) products with translational energies comprising roughly 30 percent of the total available energy (E sub avl), where E sub avl is the sum of the collision energy and the reaction exothermicity. Angular data show that the hyperthermal CO is scattered preferentially in the specular direction. CO2 product was also observed, but at much lower intensities than CO and with only thermal velocities.

Minton, Timothy K.↗

Measuring Transmission Efficiencies Of Mass Spectrometers

Coincidence counts yield absolute efficiencies. System measures mass-dependent transmission efficiencies of mass spectrometers, using coincidence-counting techniques reminiscent of those used for many years in calibration of detectors for subatomic particles. Coincidences between detected ions and electrons producing them counted during operation of mass spectrometer. Under certain assumptions regarding inelastic scattering of electrons, electron/ion-coincidence count is direct measure of transmission efficiency of spectrometer. When fully developed, system compact, portable, and used routinely to calibrate mass spectrometers.

Srivastava, Santosh K.↗

Electron Excitation Cross Sections for the 2s(sup 2)2p(sup 3) (sup 4)S -> 2s(sup 2)2p(sup 3) (sup 2d) ->2s2p(sup 4) (sup 4p) (Resonance) Transitions in Oil

Experimental and theoretical excitation cross sections are reported for the first forbidden transition xxx and the first allowed (resonance) transition xxx in OII. Use is made of electron-energy loss and merged beams methods. The electron energy range covered is 3.33 eV (threshold) to 15 eV for the S->D transition, and 14.9 eV (threshold) to 40 eV for the S->P transition. Care was taken to assess and minimize the metastable fraction of the OII beam. An electron mirror was designed and tested to reflect inelastically back-scattered electrons into the forward direction to account for the full range of polar scattering angles. Comparisons are made between present experiments and 11-state R-Matrix calculations. Calculations are also presented for the xxx transition.

electron excitation↗

Theory of direct scattering of neutral and charged atoms

The theory for direct elastic and inelastic collisions between composite atomic systems formulated within the framework of the Glauber approximation is presented. It is shown that the phase-shift function is the sum of a point Coulomb contribution and of an expression in terms of the known electron-hydrogen-atom and proton-hydrogen-atom phase shift function. The scattering amplitude is reexpressed, the pure Coulomb scattering in the case of elastic collisions between ions is isolated, and the exact optical profile function is approximated by a first-order expansion in Glauber theory which takes into account some multiple collisions. The approximate optical profile function terms corresponding to interactions involving one and two electrons are obtained in forms of Meijer G functions and as a one-dimensional integral, and for collisions involving one or two neutral atoms, the scattering amplitude is further reduced to a simple closed-form expression.

Franco, V.↗

Multiple scattering and charged-particle - hydrogen-atom collisions

Glauber-approximation scattering amplitudes for charged-particle - hydrogen-atom elastic and inelastic collisions are derived directly in terms of the known particle-electron and particle-proton Coulomb scattering amplitudes and the known hydrogen-atom form factors. It is shown that the particle-hydrogen amplitude contains no single-scattering term. The double-scattering term is obtained as a two-dimensional integral in momentum space. It is demonstrated how the result can be used as the starting point for an alternative and relatively simple derivation, in closed form, of the Glauber particle-hydrogen scattering amplitude for transitions from the ground state to an arbitrary (nlm) state.

Franco, V.↗

Electron excitation cross sections for the 2s(2)2p(3)4S(O) -- 2s(2)2p(3)2D(O) (forbidden) and 4S(O) -- 2s2p(4) 4P (resonance) transitions in O II

Experimental and theoretical excitation cross sections are reported for the first forbidden transition 4S(O) -- 2S(2)2p(3) 2D(O) (lambda-lambda 3726, 3729) and the first allowed (resonance) transition 4S(O) -- 2s2p(4) 4P(lambda-833) in O II. Use is made of electron energy loss and merged-beams methods. The electron energy range covered is 3.33 (threshold) to 15 eV for the S -- D transition, and 14.9 (threshold) to 40 eV for the S -- P transition. Care was taken to assess and minimize the metastable fraction of the O II beam. An electron mirror was designed and tested to reflect inelastically backscattered electrons into the forward direction to account for the full range of polar scattering angles. Comparisons are made between present experiments and 11-state R-matrix calculations. Calculations are also presented for the 4S(O) -- 2s(2)2p(3)2P(O) (lambda-2470) transition.

Zuo, M.↗

An estimation of the primary proton spectrum between 10 to the 12th and 10 to the 14th eV

Based on measurements of unaccompanied charged hadron flux from 10 to the 11th to 10 to the 14th eV at mountain altitudes, the primary proton flux is estimated using recently determined proton-proton total cross sections from new measurements of the real part of the forward scattering amplitude at ISR, and Glauber theory to calculate proton-air inelastic cross section. The derived spectrum agrees well with extrapolation of the direct measurements below 2 times 10 to the 12th eV without change of slope.

Gaisser, T. K.↗

Nuclear gamma rays from Li-7 in the galactic cosmic radiation.

The observation of a gamma-ray line feature from the direction of the galactic center by Johnson, Harnden, and Haymes is interpreted as the 478-keV nuclear de-excitation of low-energy Li-7 cosmic rays as they inelastically scatter from the interstellar gas. The prediction of an associated line at 432 keV is proposed as a definitive test of this idea.

Fishman, G. J.↗

Cyclotron Line Measurements with INTEGRAL

Due to its broadband energy coverage, INTEGRAL has made important contributions to observing and interpreting cyclotron lines, which are present in the 10-100 keV range of a sample of accreting pulsars. In these systems photons with energies fulfilling the resonance condition inelastically Compton scatter off electrons quantized in the accretion column above the neutron star's magnetic pole(s). This process gives rise to the broad, absorption-like lines or 'cyclotron resonant scattering features' (CRSF). The observed lines allow to directly measure the B-fields of these sources, resulting in values of a few times 1E12G. In this overview I will present recent highlights regarding CRSF observations as well as discuss current ideas and models for the physical conditions in the accretion column. Among the former are the stability of the spectrum of Vela X-1 during giant flares in 2003, the observation of three cyclotron lines during the 2004 outburst of V0332+53, the confirmation of the fundamental line at approximately 45 keV during a 2005 normal outburst of A0535-26, and the simultaneous detection of the two lines in the dipping source 4U 1907+09 (for which also a torque reversal was detected for the first time). Through these and other observations it has become increasingly apparent that two types of observations can potentially be used to constrain the accretion column geometry: the determination of energy ratios for multiple harmonic lines (only two sources with greater than 2 lines are known), was well as the evolution of the fundamental line centroid, which, for different sources, may or may not be correlated with flux. Furthermore, first steps have been taken away from the usual phenomenological description of the lines, towards a physical approach based on self-consistent CRSF modeling. Initial applications are presented.

Pottschmidt, K.↗

Rate calculations for the simultaneous vibrational relaxation and dissociation of nitrogen

Experimental data on vibrational relaxation and dissociation rates in highly nonequilibrium gases are scarce. Recently there have been several attempts at generating these rates by direct calculation of inelastic collision cross-sections. Some issues that need to be considered if such calculations are to be used as a basis for analysis and design are examined. In particular, the following are examined: (1) collinear vs 3D scattering models, (2) accurate intermolecular potentials, (3) closed channels and acceleration schemes, (4) thermal averaging and thermal rates, and (5) code validation. It has been necessary to confront these issues during the course of N2-N2 and N2-N inelastic cross-section calculations.

Gonzales, David A.↗

Simultaneous Conoscopic Holography and Raman Spectroscopy

A new instrument was developed for chemical characterization of surfaces that combines the analytical power of Raman spectroscopy with the three-dimensional topographic information provided by conoscopic holography. The figure schematically depicts the proposed hybrid instrument. The output of the conoscopic holographic portion of the instrument is a topographical map of the surface; the output of the Raman portion of the instrument is hyperspectral Raman data, from which the chemical and/or biological composition of the surface would be deduced. By virtue of the basic principles of design and operation of the instrument, the hyperspectral image data would be inherently spatially registered with the topographical data. In conoscopic holography, the object and reference beams of classical holography are replaced by the ordinary and extraordinary components generated by a single beam traveling through a birefringent, uniaxial crystal. In the basic conoscopic configuration, a laser light is projected onto a specimen and the resulting illuminated spot becomes a point source of diffuse light that propagates in every direction. The laser beam is rasterscanned in two dimensions (x and y) perpendicular to the beam axis (z), and at each x,y location, the pattern of interference between the ordinary and extraordinary rays is recorded. The recorded interferogram constitutes the conoscopic hologram. Of particular significance for the proposed instrument is that the conoscopic hologram contains information on the z coordinate (height) of the illuminated surface spot. Hence, a topographical map of the specimen is constructed point-by-point by rastering the laser beam in the x and y directions and correlating the x and y coordinates with the z information obtained from the interferograms. Conoscopic imaging is an established method, and conoscopic laboratory instruments for surface metrology are commercially available. In Raman spectroscopy of a surface, one measures the spectrum of laser light scattered inelastically from a laser-illuminated spot on the surface. The wavelengths of the inelastically scattered light differ from that of the incident laser beam by amounts that correspond to the energies of molecular vibrations. The resulting vibrational spectrum can be used to identify the molecules. Raman spectroscopy is a standard laboratory technique for identifying mineralogical, biological, and other specific chemical compositions.

Schramm, Harry F.↗

The application of time-dependent wavepacket methods to reactive scattering

Several methods for performing numerically exact reactive scattering calculations using time-dependent wavepackets are reviewed. The basic idea is to take the multiarrangement reactive problem and reformulate it as one or more inelastic ones. In the simplest method, total reaction probabilities are extracted by calculating the flux of the wavepacket as it leaves the interaction region in the direction of the reactive arrangement. To make this practical, complex potentials that absorb the wavepacket before it reaches the numerical grid boundary are used. Methods that generate observables ranging from total, energy-averaged reaction probabilities up to energy- and state-resolved S-matrix elements are used. Techniques for efficiently performing the necessary inelastic wavepacket propagation are also reviewed.

Neuhauser, Daniel↗

Magnetospheric interaction with Triton's ionosphere

The large electron densities measured by the Voyager radio occultation experiment are attributed to the precipitation of magnetospheric electrons with energy above 10 keV. Because the ionospheric electric Pedersen conductivity of Triton is about 10,000-20,000 mho and the Alfven conductance is about 3.5 mho, direct convective flow of plasma into the essentially infinitely conducting ionosphere is negligible. Magnetospheric electrons are transported to Triton's ionopause by curvature drift as a result of weak magnetic field line draping in a sub-Alfvenic plasma interaction with Triton. At the ionopause energetic electrons have a high probability of elastic and inelastic scattering and precipitate into the upper atmosphere. The average power dissipation is estimated to be about (2 - 3) x 10 to the 8th W.

Strobel, Darrell F.↗

Laser Rayleigh and Raman Diagnostics for Small Hydrogen/oxygen Rockets

Localized velocity, temperature, and species concentration measurements in rocket flow fields are needed to evaluate predictive computational fluid dynamics (CFD) codes and identify causes of poor rocket performance. Velocity, temperature, and total number density information have been successfully extracted from spectrally resolved Rayleigh scattering in the plume of small hydrogen/oxygen rockets. Light from a narrow band laser is scattered from the moving molecules with a Doppler shifted frequency. Two components of the velocity can be extracted by observing the scattered light from two directions. Thermal broadening of the scattered light provides a measure of the temperature, while the integrated scattering intensity is proportional to the number density. Spontaneous Raman scattering has been used to measure temperature and species concentration in similar plumes. Light from a dye laser is scattered by molecules in the rocket plume. Raman spectra scattered from major species are resolved by observing the inelastically scattered light with linear array mounted to a spectrometer. Temperature and oxygen concentrations have been extracted by fitting a model function to the measured Raman spectrum. Results of measurements on small rockets mounted inside a high altitude chamber using both diagnostic techniques are reported.

Degroot, Wilhelmus A.↗

Retrieval Studies with LIDORT

This short program of LIDORT-based research in atmospheric trace gas retrieval was conducted over the 1 year period 01 July 2002 to 30 June 2003. After consultation with the NASA reporting officer, the first of the two original proposal activities (development of a direct-fitting total O3 column retrieval algorithm with operational capability for GOME data) was replaced by other tasks. The three activities addressed were: (1) Sensitivity studies for column and profile retrieval of NO2 distributions from a new generation of multi-axis ground-based spectrometers; (2) use of the LIDORT-RRS model to determine the effect of inelastic rotational Raman scattering at SBUV wavelengths; (3) an examination of ozone profile weighting functions in the presence of optically thick tropospheric clouds.

Bhartia, P. K.↗

Effect of charge polarization on inelastic scattering - Differential and integral cross sections for excitation of the 2/super 1/S state of helium by electron impact.

Experimental differential scattering cross sections for excitation of helium by electron impact from its ground state to its 2(super 1)S state are presented at four incident electron energies in the range from 26 to 55.5 eV for scattering angles between 10 and 70 deg and at 81.6 eV for scattering angles between 10 and 80 deg. These cross sections are normalized and compared with results predicted by the Born approximation, the polarized Born approximation, and several other first-order approximations in which direct excitation is calculated in the Born approximation and exchange scattering in various Ochkur-like approximations.

Rice, J. K.↗

A Potential Function Derivation of a Constitutive Equation for Inelastic Material Response

Physical and thermodynamic concepts are used to develop a potential function for application to high temperature polycrystalline material response. Inherent in the formulation is a differential relationship between the potential function and constitutive equation in terms of the state variables. Integration of the differential relationship produces a state variable evolution equation that requires specification of the initial value of the state variable and its time derivative. It is shown that the initial loading rate, which is directly related to the initial hardening rate, can significantly influence subsequent material response. This effect is consistent with observed material behavior on the macroscopic and microscopic levels, and may explain the wide scatter in response often found in creep testing.

Stouffer, D. C.↗

Innovative Research Program: Supershields for Gamma-Ray Astronomy

The supershield project evaluated the importance of novel shield configurations for suppressing neutron induced background in new classes of gamma-ray detectors such as CZT. The basic concept was to use a two-part shield. The outer shield material heavily moderates the incoming neutron spectrum. This moderated neutron beam is then more easily absorbed by the inner material, which is an efficient neutron absorber. This approach is, in principle, more efficient than that in previous attempts to make neutron shields. These previous attempts involved biatomic, monlithic shields (eg. LiH) in which the shield consisted of a single material but with two types of atoms - one for moderating and one for absorbing. The problem with this type of monolithic shield is that moderating neutrons, without the efficient absorption of them, leads to the leakage into the detector of neutrons with a low energy component (approx. 10-100 KeV). These energy neutrons are particularly problematic for many types of detectors. The project was roughly divided into phases. In the first phase we attempted to carefully define the neutron source function incident on any space instrument. This is essential since the design of any shield depends on the shape of the incident neutron spectrum. We found that approximations commonly used in gamma-ray astronomy for photon background is inadequate. In addition, we found that secondary neutrons produced in any passive shield, and dominated by inelastic neutron scattering, are far more important than background due to neutron activation. The second phase of our work involved design of supershield geometries (one and three dimensional) in order to compare different shield configurations and materials for their effectiveness as neutron shields. Moreover we wanted to compare these supershields with previous neutron shields to confirm the performance differences between the supershield (two material) and monolithic (one material) designs and to understand the physics origins of these differences more clearly. The third phase of the supershield program involved the benchmarking of the supershield designs through direct experimental verification. This required fabricating various supershields and exposing them to beams of neutrons to directly characterize their performance. With explicit verification that our modeling procedures can be used with confidence, we are now in a position to design shields for realistic space geometries. Using the supershield modeling capacity developed as part of this program we are attempting to evaluate their utility for a specific proposed mission--the Energetic X-ray Imaging Survey Telescope (EXIST). It is anticipated that this experiment, which is limited by internal background at high energies, might benefit from a neutron shield.

Hailey, Charles J.↗