SEARCH · Search NASA

Results for “Disk milling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

16 records

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Chemical Free Two-Step Hydrothermal Pretreatment to Improve Sugar Yields from Energy Cane

Energy cane is an attractive lignocellulosic feedstock for processing into biofuels and bioproducts. A low-severity two-step hydrothermal pretreatment was investigated on energy cane for the production of monomeric sugar. Pretreatment temperature and time, in addition to the effect of disk milling, were observed for the glucose and xylose yields during hydrolysis. At residence times above 5 min in case of pretreatment at 200 °C, all of the hemicellulose was observed to be solubilized. The pretreatment condition of 200 °C for 10 min with disk milling was observed to provide the highest glucose concentration of 5.4%, and 200 °C for 5 min with disk milling provided the highest xylose concentration of 2.15%. The effect of disk milling in improving the sugar concentrations during hydrolysis was significant, especially at lower pretreatment temperatures and times. Low xylose yields at higher temperatures were attributed to the formation of degradation products at increased severity.

09 BIOMASS FUELS↗

DOE OSTI2020

Variability in structural carbohydrates, lipid composition, and cellulosic sugar production from industrial hemp varieties

The aim of this study was to determine carbohydrate recovery from hemp for ethanol production and quantify biodiesel from TAG (Triacylglycerol) present in hemp. The structural composition of five different hemp varieties (Seward County-SC, York County-YC, Loup County-LC, 19 m96136-19 m, and CBD Hemp-CBD) were analyzed. Concentration of glucan and xylan ranged between 32.63 to 44.52% and 10.62 to 15.48% respectively. The biomass was then pretreated with Liquid hot water followed by disk milling and then hydrolyzed enzymatically to yield monomeric sugars. High glucose (63-85%) and xylose (73-88%) recovery was achieved. Lipids were extracted from hemp using hexane and isopropanol and then transesterified to produce biodiesel. Approximately, 50% of total fatty acids in SC, LC, and CBD hemp were linoleic acid. Palmitic acid was present between 32 to 50% in varieties YC and 19 m. Highest TAG concentration at 25% of total lipids was observed in CBD hemp. In conclusion, the analysis on lipid composition and high sugar recovery demonstrates hemp as a potential bioenergy crop for ethanol and biodiesel coproduction.

09 BIOMASS FUELS↗

DOE OSTI2020

Data for Variability in Structural Carbohydrates, Lipid Composition, and Cellulosic Sugar Production from Industrial Hemp Varieties

The aim of this study was to determine carbohydrate recovery from hemp for ethanol production and quantify biodiesel from TAG (triacylglycerol) present in hemp. The structural composition of five different hemp varieties (Seward County-SC, York County-YC, Loup County-LC, 19 m96136-19 m, and CBD Hemp-CBD) were analyzed. Concentration of glucan and xylan ranged between 32.63 to 44.52% and 10.62 to 15.48% respectively. The biomass was then pretreated with Liquid hot water followed by disk milling and then hydrolyzed enzymatically to yield monomeric sugars. High glucose (63-85%) and xylose (73-88%) recovery was achieved. Lipids were extracted from hemp using hexane and isopropanol and then transesterified to produce biodiesel. Approximately, 50% of total fatty acids in SC, LC, and CBD hemp were linoleic acid. Palmitic acid was present between 32 to 50% in varieties YC and 19 m. Highest TAG concentration at 25% of total lipids was observed in CBD hemp. The analysis on lipid composition and high sugar recovery demonstrates hemp as a potential bioenergy crop for ethanol and biodiesel coproduction.

Biomass Analytics↗

DOE OSTI2022

Data for A Chemical-Free Pretreatment for Biosynthesis of Bioethanol and Lipids from Lignocellulosic Biomass: An Industrially Relevant 2G Biorefinery Approach

A wide range of inorganic and organic chemicals are used during the pretreatment and enzymatic hydrolysis of lignocellulosic biomass to produce biofuels. Developing an industrially relevant 2G biorefinery process using such chemicals is challenging and requires more unit operations for downstream processing. A sustainable process has been developed to achieve industrially relevant titers of bioethanol with significant ethanol yield. The pretreatment of sorghum biomass was performed by a continuous pilot-scale hydrothermal reactor followed by disk milling. Enzymatic hydrolysis was performed without washing the pretreated biomass. Moreover, citrate buffer strength was reduced to 100-fold (50 mM to 0.5 mM) during the enzymatic hydrolysis. Enzymatic hydrolysis at 0.5 mM citrate buffer strength showed that significant sugar concentrations of 222 ± 2.3 to 241 ± 2.3 g/L (glucose + xylose) were attained at higher solids loadings of 50 to 60% (w/v). Furthermore, hydrolysates were fermented to produce bioethanol using two different xylose-fermenting Saccharomyces cerevisiae strains and a co-culture of xylose-fermenting and non-GMO yeast cultures. Bioethanol titer of 81.7 g/L was achieved with an ethanol yield of 0.48 gp/gs. Additionally, lipids were produced using the oleaginous yeast Rhodosporidium toruloides , yielding 13.2 g/L lipids with cellular lipid accumulation of 38.5% w/w from 100 g/L of sugar concentration. In summary, reducing the strength of the citrate buffer during enzymatic hydrolysis and omitting inorganic chemicals from the pretreatment process enhances the fermentability of hydrolysates and can also reduce operating costs.

Conversion↗

DOE OSTI2022

A Chemical-Free Pretreatment for Biosynthesis of Bioethanol and Lipids from Lignocellulosic Biomass: An Industrially Relevant 2G Biorefinery Approach

A wide range of inorganic and organic chemicals are used during the pretreatment and enzymatic hydrolysis of lignocellulosic biomass to produce biofuels. Developing an industrially relevant 2G biorefinery process using such chemicals is challenging and requires more unit operations for downstream processing. A sustainable process has been developed to achieve industrially relevant titers of bioethanol with significant ethanol yield. The pretreatment of sorghum biomass was performed by a continuous pilot-scale hydrothermal reactor followed by disk milling. Enzymatic hydrolysis was performed without washing the pretreated biomass. Moreover, citrate buffer strength was reduced to 100-fold (50 mM to 0.5 mM) during the enzymatic hydrolysis. Enzymatic hydrolysis at 0.5 mM citrate buffer strength showed that significant sugar concentrations of 222 ± 2.3 to 241 ± 2.3 g/L (glucose + xylose) were attained at higher solids loadings of 50 to 60% (w/v). Furthermore, hydrolysates were fermented to produce bioethanol using two different xylose-fermenting Saccharomyces cerevisiae strains and a co-culture of xylose-fermenting and non-GMO yeast cultures. Bioethanol titer of 81.7 g/L was achieved with an ethanol yield of 0.48 gp/gs. Additionally, lipids were produced using the oleaginous yeast Rhodosporidium toruloides, yielding 13.2 g/L lipids with cellular lipid accumulation of 38.5% w/w from 100 g/L of sugar concentration. In summary, reducing the strength of the citrate buffer during enzymatic hydrolysis and omitting inorganic chemicals from the pretreatment process enhances the fermentability of hydrolysates and can also reduce operating costs.

Deshavath, Narendra Naik↗

DOE OSTI2025

Comparison of three measurement modalities for 3D characterization of manufactured features and process-induced porosity in titanium alloy additively manufactured parts

Nondestructive characterization of internal features and defects within complex components is vital for many industrial applications, particularly with the advent of additive manufacturing (AM) technologies. However, community understanding of the limitations of nondestructive methods such as X-ray Computed Tomography (CT) can be limited in certain industrial sectors as these may be emergent applications. In this paper, we investigate the limits of X-ray CT measurements and compare extracted data with mechanical polishing serial sectioning (MPSS) and confocal laser scanning microscopy (CLSM). The test object is an additively manufactured titanium alloy disk that contains both process-induced porosity and machined features, including focused ion beam milled features designed to probe the resolution limits of X-ray CT. Results show that each of these characterization techniques has advantages and disadvantages. We compare data acquisition times, spatial resolution, geometric measurement accuracy and defect visualization fidelity across these modalities to establish a practical framework.

Additive manufacturing↗

DOE OSTI2022

Particle scale impacts on deconstruction energy of pine residues

The goal of this Case Study was to quantify the impacts of variable moisture and ash on hammer mill throughput and energy consumption and on generation of fines that are not able to be fed to conversion, as compared to a status quo Base Case system. Also considered was convertible carbon content (minimum carbon specification) and maximum ash content and the delivered feedstock cost impacts of not being able to feed residue not meeting both specifications to the conversion reactor. Laboratory data on the impacts of input particle size and moisture content on the exit particle size were received from FCIC Subtask 5.2 from their single particle impact population balance modeling study. Additional throughput and energy consumption data were obtained from FCIC Subtask 5.2 for the same grinder with a 6 mm screen in place. These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Because the ash contents in the separated fines had not been analyzed in the laboratory at the time of the model runs, we chose to assume that the ash distributed proportionally with total mass into the overs and unders in the disk screen following grinding. Key takeaways from this Case Study are that it is significantly more cost effective to hammer mill the residue prior to drying, even though the grinder throughput is lower and energy consumption is higher versus drying first before grinding. An effect of dry grinding versus high moisture grinding is the production of higher amounts of fines during dry grinding, leading to significantly more of the ground feedstock being rejected by conversion for being below a minimum particle size. With wet grinding the system is still able to produce more preprocessed feedstock meeting the minimum particle size specification even though the instantaneous throughput is lower than for the case of grinding dry feedstock. Additionally, even without the higher fines production from dry grinding, the status quo would still be more costly than wet grinding because the material is rejected after the drying energy has already been input for the dry grinding case. Finally, significant reductions in drying energy are obtained by drying after grinding, and those reductions are of far greater magnitude than the grinding energy increase.

09 BIOMASS FUELS↗

DOE OSTI2023

Particle Scale Impacts on Deconstruction Energy of Pine Residues

energy consumption↗

DOE OSTI2021

Demonstration of Dimensional and Microstructural Postirradiation Examination Capabilities on MiniFuel Disk Specimens

This work demonstrates two new MiniFuel postirradiation examination (PIE) capabilities, laser profilometry and serial sectioning, for future use on alpha-U specimens for the upcoming Mini-99 irradiation campaign. Representative U–Mo disk specimens—3 mm in diameter and approximately 0.75 mm in thickness—were subjected to dimensional measurements using standard calipers, as well as a new Keyence CL-3000 series laser profilometry system designed to measure the surface of both sides of the disk simultaneously. The laser profilometry system captured thickness gradients across the specimens as large as 0.2 mm. Additionally, because of the limitations inherent to the use of calipers, caliper measurements consistently overestimated the initial volume of MiniFuel disk specimens compared to the laser profilometry method by up to 5%. However, the results show that optimal data collection and analysis procedures are crucial to avoiding significant artifacts during data collection that can lead to large errors (approximately 10%). Serial sectioning using a combination of ion milling and electron imaging was also demonstrated for the analysis of micron-sized control volumes. Nanometer- to micron-scale porosity was resolved on a representative U–Mo specimen before irradiation, even when the surface of the specimen appeared free of porosity. Future efforts to relate microstructural features (porosity, fission product distributions, and so on) to macroscale effects (dimensional changes, thermal conductivity degradation) require accurate characterization methods such as those demonstrated in this work. These advanced PIE capabilities will be applied to optimized alpha-U specimens for the upcoming Mini-99 neutron irradiation campaign.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2020

Synthesis of bulk reactive Ni–Al composites using high pressure torsion

Self-propagating exothermic reactions, for instance in the nickel-aluminum (Ni-Al) system, have been widely studied to create high performance intermetallic compounds or for in-situ welding. Their easy ignition once the phase spacing is reduced below the micron scale, makes top-down methods like high-energy ball milling, ideal to fabricate such reactive nanostructures. A major drawback of ball milling is the need of a sintering step to form bulk pieces of the reactive material. However, this is not possible, as the targeted reactions would already proceed. Therefore, we investigate the ability of high pressure torsion as an alternative process, capable to produce bulk nanocomposites from powder mixtures. Severe straining of powder mixtures with a composition of 50 wt% Ni and 50 wt% Al enables fabrication of self-reactive bulk samples with microstructures similar to those obtained from ball milling or magnetron sputtering. Additionally, samples deformed at ambient temperature are highly reactive and can be ignited significantly below the Al melting point, finally predominantly consisting of Al 3 Ni 2 and Al 3 Ni, independent of the applied strain. Although the reaction proceeds first at the edge of the disk, the strain gradient present in the disks does not prevent reaction of the whole sample.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Discovery of the luminous X-ray ignition eRASSt J234402.9-352640: I. Tidal disruption event or a rapid increase in accretion in an active galactic nucleus?

In November 2020, a new, bright object, eRASSt J234402.9-352640, was discovered in the second all-sky survey of SRG/eROSITA. The object brightened by a factor of at least 150 in 0.2–2.0 keV flux compared to an upper limit found six months previous, reaching an observed peak of 1.76 -0.24 +0.03 × 10 -11 erg cm -2 s -1 . The X-ray ignition is associated with a galaxy at z = 0.10, making the peak luminosity log 10 (L 0.2-2 keV /[erg s -1 ]) = 44.7 ± 0.1. Around the time of the rise in X-ray flux, the nucleus of the galaxy brightened by approximately 3 mag. in optical photometry, after correcting for the host contribution. We present X-ray follow-up data from Swift, XMM-Newton, and NICER, which reveal a very soft spectrum as well as strong 0.2–2.0 keV flux variability on multiple timescales. Optical spectra taken in the weeks after the ignition event show a blue continuum with broad, asymmetric Balmer emission lines, and high-ionisation ([OIII]λλ4959,5007) and low-ionisation ([NII]λ6585, [SII]λλ6716,6731) narrow emission lines. Following the peak in the optical light curve, the X-ray, UV, and optical photometry all show a rapid decline. The X-ray light curve shows a decrease in luminosity of ~0.45 over 33 days and the UV shows a drop of ~0.35 over the same period. eRASSt J234402.9-352640 also shows a brightening in the mid-infrared, likely powered by a dust echo of the luminous ignition. We find no evidence in Fermi-LAT γ-ray data for jet-like emission. The event displays characteristics of a tidal disruption event (TDE) as well as of an active galactic nucleus (AGN), complicating the classification of this transient. Based on the softness of the X-ray spectrum, the presence of high-ionisation optical emission lines, and the likely infrared echo, we find that a TDE within a turned-off AGN best matches our observations.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2022

Mechanical Property Evaluation of CuNb Composites Manufactured with High-Pressure Torsion

Copper is under consideration as the optimum material for both high heat flux applications and high pulsed magnets. One challenge is that copper has low strength which is problematic to deployment in these applications. One solution is to alloy copper with BCC elements to improve its mechanical properties. However, the limited solubility of the BCC elements in copper requires high deformation processes to be used in order to manufacture these 3D composites. Here, high energy ball milling combined with high pressure torsion was used to manufacture 3D Cu-Nb composites. After the consolidation the mechanical properties of the composites were measured using micro- and nanohardness testing at room and elevated temperature. The results indicated that after 10 turns during the high-pressure torsion consolidation, the mechanical properties of the composites were completely saturated displaying uniform properties across the manufactured disk. Performing the high pressure torsion at temperature further improved consolidation of the disk. The high temperature nanoindentation also indicated a change in the deformation mechanism between 200 and 500 ºC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Effect of Oil Viscosity and Impact of Ionic Liquid Additive on Electrically Induced Pitting in Rolling Contact

Electrically induced bearing damage (EIBD) is a growing concern in electric drivetrains, where electrical discharge currents generate localized pitting that accelerates wear and premature failure. While ionic liquids (ILs) have shown promise as lubricant additives due to their natural physical adsorption, strong capabilities of tribofilm formation, and high molecular tunability, their role in mitigating EIBD is little known. This gap is especially evident because lubricant viscosity and film thickness affect discharge behavior, and additive performance in these regimes has not been well explored. In this study, tribological tests were performed using a ball-on-disk pure rolling-contact system under an applied voltage on polyalphaolefin oils of three viscosities (4, 10, and 150 cSt measured at 100 °C), with and without the addition of a phosphonium-phosphate IL. Surface damage was analyzed using scanning electron microscopy (SEM) and stylus profilometry. Damage quantification was based on pit morphology analysis of SEM images. The results provide new insights into how oil viscosity governs the discharge behavior and how an IL additive could influence the pit formation. While viscosity seems to play a significant role, an IL additive shows potential to reduce EIBD and deserves further study.

electrically induced bearing damage (EIBD)↗

DOE OSTI2023

Grey Galaxies’ as an endpoint of the Kerr-AdS superradiant instability

Kerr-AdS d+1 black holes for d ≥ 3 suffer from classical superradiant instabilities over a range of masses above extremality. We conjecture that these instabilities settle down into Grey Galaxies (GGs) — a new class of coarse-grained solutions to Einstein’s equations which we construct in d = 3. Grey Galaxies are made up of a black hole with critical angular velocity ω = 1 in the ‘centre’ of AdS, surrounded by a large flat disk of thermal bulk gas that revolves around the centre of AdS at the speed of light. The gas carries a finite fraction of the total energy, as its parametrically low energy density and large radius are inversely related. GGs exist at masses that extend all the way down to the unitarity bound. Their thermodynamics is that of a weakly interacting mix of Kerr-AdS black holes and the bulk gas. Their boundary stress tensor is the sum of a smooth ‘black hole’ contribution and a peaked gas contribution that is delta function localized around the equator of the boundary sphere in the large N limit. We also construct another class of solutions with the same charges; ‘Revolving Black Holes (RBHs)’. RBHs are macroscopically charged SO(d, 2) descendants of AdS-Kerr solutions, and consist of ω = 1 black holes revolving around the centre of AdS at a fixed radial location but in a quantum wave function in the angular directions. RBH solutions are marginally entropically subdominant to GG solutions and do not constitute the endpoint of the superradiant instability. Nonetheless, we argue that supersymmetric versions of these solutions have interesting implications for the spectrum of supersymmetric states in, e.g. N = 4 Yang-Mills theory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Creep Behavior of Compact γ′-γ″ Coprecipitation Strengthened IN718-Variant Superalloy

The development of high-temperature heavy-duty turbine disk materials is critical for improving the overall efficiency of combined cycle power plants. An alloy development strategy to this end involves superalloys strengthened by ‘compact’ γ′-γ″ coprecipitates. Compact morphology of coprecipitates consists of a cuboidal γ′ precipitate such that γ″ discs coat its six {001} faces. The present work is an attempt to investigate the microstructure and creep behavior of a fully aged alloy exhibiting compact coprecipitates. We conducted heat treatments, detailed microstructural characterization, and creep testing at 1200 °F (649 °C) on an IN718-variant alloy. Our results indicate that aged IN718-27 samples exhibit a relatively uniform distribution of compact coprecipitates, irrespective of the cooling rate. However, the alloy ruptured at low strains during creep tests at 1200 °F (649 °C). At 100 ksi (689 MPa) load, the alloy fails around 0.1% strain, and 75 ksi (517 MPa) loading causes rupture at 0.3% strain. We also report extensive intergranular failure in all the tested samples, which is attributed to cracking along grain boundary precipitates. The results suggest that while the compact coprecipitates are indeed thermally stable during thermomechanical processing, the microstructure of the alloy needs to be optimized for better creep strength and rupture life.

36 MATERIALS SCIENCE↗

DOE OSTI2026

JWST Observations of Starbursts: Dust Processing in the M82 Superwind

We present JWST MIRI and NIRCam imaging of the inner ∼5 kpc of the M82 superwind at ~ $0''_{.}05 - 0''_{.}375$(∼0.9–6.5 pc) resolution. Targeted filters probe emission from polycyclic aromatic hydrocarbons (PAHs; F335M, F360M, F770W, F1130W) and continuum (F250M, F360M) The images reveal a network of cool wind filaments traced by PAHs. PAH surface brightness declines with the inverse square of distance to the midplane, suggesting that the incident radiation field from the starburst drives the observed PAH intensity out to ±2.5 kpc. The 3.3/11.3 and 3.3/7.7 μm band ratios show uniformity with distance from the starburst, though comparisons with mid-IR dust emission models indicate a modest shift toward larger PAHs. Outside the disk, 11.3/7.7 μm increases moderately, reflecting that PAHs become more neutral with distance from the starburst as they are exposed to a declining radiation field and ionization parameter. Overall, PAHs in the wind are consistent with standard-to-large sizes and standard-to-high ionization states. Including Spitzer and Herschel data, PAH abundance (q PAH ) is set at ∼1% in the starburst and remains unchanging out to ±5 kpc off the disk. This flat q PAH profile suggests that PAHs are shielded from the hot wind, perhaps residing in the surface layers of cool clouds, with possible replenishment from cloud interiors and enrichment of the halo from previous bursts. In this picture, clouds are not dense enough to promote PAH growth, and they likely undergo radiative cooling and mixing with the hot phase to survive the gauntlet for at least ∼20 Myr.

Cronin, Serena A. [University of Maryland, College↗