Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dissociation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Observation of the dynamics leading to a conical intersection in dissociative electron attachment to water

Following prior work on the lower-energy resonances, we apply techniques of momentum imaging and ab initio scattering calculations to the process of dissociative electron attachment to water via the highest-energy {sup 2}B{sub 2} resonance. We focus on the H{sup -} anion fragment, which is produced via dynamics passing through and avoiding the conical intersection with the lower A{sub 1} state, leading to OH ({sup 2}{Pi}) and OH ({sup 2}{Sigma}), respectively. The momentum imaging technique, when combined with theoretical calculations on the attachment amplitude and dissociation dynamics, demonstrates that the angular distributions provide a signature of the location of the conical intersection in the space of nuclear configurations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Hydrogen Dissociation on Pd 4 S Surfaces

Exposure of Pd-based hydrogen purification membranes to H 2 S, a common contaminant in coal gasification streams, can cause membrane performance to deteriorate, either by deactivating surface sites required for dissociative H 2 adsorption or by forming a low-permeability sulfide scale. In this work, the composition, structure, and catalytic activity of Pd 4 S, a surface scale commonly observed in Pd-membrane separation of hydrogen from sulfur-containing gas streams, were examined using a combination of experimental characterization and density functional theory (DFT) calculations. A Pd 4 S sample was prepared by exposing a 100 μm Pd foil to H 2 S at 908 K. Both X-ray photoemission depth profiling and low energy ion scattering spectroscopic (LEISS) analysis reveal slight sulfur-enrichment of the top surface of the sample. This view is consistent with the predictions of DFT atomistic thermodynamic calculations, which identified S-terminated Pd4S surfaces as energetically favored over corresponding Pd-terminated surfaces. Activation barriers for H 2 dissociation on the Pd 4 S surfaces were calculated. Although barriers are higher than on Pd(111), transition state theory analysis identified reaction pathways on the S-terminated surfaces for which hydrogen dissociation rates are high enough to sustain the separation process at conditions relevant to gasification applications.

08 HYDROGEN↗

Improving Collision Induced Dissociation (CID), High Energy Collision Dissociation (HCD), and Electron Transfer Dissociation (ETD) Fourier Transform MS/MS Degradome-Peptidome Identifications Using High Accuracy Mass Information

Identification of peptides through analysis of peptide ion fragmentation mass spectra is key to proteomic/peptidomic studies. Advanced mass spectrometry has enabled measurement of peptide fragments with {approx}ppm mass error levels; however, mass accuracy has not been widely utilized in broad aspects of peptide identification. In this work we describe how peptide high-precision fragments measured with Fourier transform mass spectrometry can provide a powerful discriminative capability to distinguish true peptide 'hits' from possible incorrect peptides. For identification of peptides having multiple termini and carrying multiple charges, we show that the simple utilization of high-precision mass fragments information results in improved peptide analysis coverage and consistency, with coverage of >95% peptides identified totally from different spectral scoring and peptide statistic probability methods developed for moderate accuracy mass spectral peptide identification.

59 BASIC BIOLOGICAL SCIENCES↗

Size-extensivity-corrected multireference configuration interaction schemes to accurately predict bond dissociation energies of oxygenated hydrocarbons

Oxygenated hydrocarbons play important roles in combustion science as renewable fuels and additives, but many details about their combustion chemistry remain poorly understood. Although many methods exist for computing accurate electronic energies of molecules at equilibrium geometries, a consistent description of entire combustion reaction potential energy surfaces (PESs) requires multireference correlated wavefunction theories. Here we use bond dissociation energies (BDEs) as a foundational metric to benchmark methods based on multireference configuration interaction (MRCI) for several classes of oxygenated compounds (alcohols, aldehydes, carboxylic acids, and methyl esters). We compare results from multireference singles and doubles configuration interaction to those utilizing a posteriori and a priori size-extensivity corrections, benchmarked against experiment and coupled cluster theory. We demonstrate that size-extensivity corrections are necessary for chemically accurate BDE predictions even in relatively small molecules and furnish examples of unphysical BDE predictions resulting from using too-small orbital active spaces. We also outline the specific challenges in using MRCI methods for carbonyl-containing compounds. The resulting complete basis set extrapolated, size-extensivity-corrected MRCI scheme produces BDEs generally accurate to within 1 kcal/mol, laying the foundation for this scheme's use on larger molecules and for more complex regions of combustion PESs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-impact dissociative excitation and ionization of N{sub 2}D{sup +}

Absolute cross sections for electron-impact dissociation of N{sub 2}D{sup +} producing N{sub 2}{sup +}, ND{sup +}, and N{sup +} ion fragments were measured in the 5- to 100-eV range using a crossed electron-ion beams technique. In the 5- to 20-eV region, in which dissociative excitation (DE) is the principal contributing mechanism, N{sub 2}{sup +} production dominates. The N{sub 2}{sup +} + D dissociation channel shows a large resonant-like structure in the DE cross section, as observed previously in electron impact dissociation of triatomic dihydride species [M. Fogle, E. M. Bahati, M. E. Bannister, S. H. M. Deng, C. R. Vane, R. D. Thomas, and V. Zhaunerchyk, Phys. Rev. A 82, 042720 (2010)]. In the dissociative ionization (DI) region, 20- to 100-eV, N{sub 2}{sup +}, ND{sup +}, and N{sup +} ion fragment production are comparable. The observance of the ND{sup +} and N{sup +} ion fragments indicate breaking of the N - N bond along certain dissociation channels.

74 ATOMIC AND MOLECULAR PHYSICS↗

Thermal dissociation behavior and dissociation enthalpies of methane-carbon dioxide mixed hydrates

Replacement of methane with carbon dioxide in hydrate has been proposed as a strategy for geologic sequestration of carbon dioxide (CO{sub 2}) and/or production of methane (CH{sub 4}) from natural hydrate deposits. This replacement strategy requires a better understanding of the thermodynamic characteristics of binary mixtures of CH{sub 4} and CO{sub 2} hydrate (CH{sub 4}-CO{sub 2} mixed hydrates), as well as thermophysical property changes during gas exchange. This study explores the thermal dissociation behavior and dissociation enthalpies of CH{sub 4}-CO{sub 2} mixed hydrates. We prepared CH{sub 4}-CO{sub 2} mixed hydrate samples from two different, well-defined gas mixtures. During thermal dissociation of a CH{sub 4}-CO{sub 2} mixed hydrate sample, gas samples from the head space were periodically collected and analyzed using gas chromatography. The changes in CH{sub 4}-CO{sub 2} compositions in both the vapor phase and hydrate phase during dissociation were estimated based on the gas chromatography measurements. It was found that the CO{sub 2} concentration in the vapor phase became richer during dissociation because the initial hydrate composition contained relatively more CO{sub 2} than the vapor phase. The composition change in the vapor phase during hydrate dissociation affected the dissociation pressure and temperature; the richer CO{sub 2} in the vapor phase led to a lower dissociation pressure. Furthermore, the increase in CO{sub 2} concentration in the vapor phase enriched the hydrate in CO{sub 2}. The dissociation enthalpy of the CH{sub 4}-CO{sub 2} mixed hydrate was computed by fitting the Clausius-Clapeyron equation to the pressure-temperature (PT) trace of a dissociation test. It was observed that the dissociation enthalpy of the CH{sub 4}-CO{sub 2} mixed hydrate lays between the limiting values of pure CH{sub 4} hydrate and CO{sub 2} hydrate, increasing with the CO{sub 2} fraction in the hydrate phase.

03 NATURAL GAS↗

Electron-impact dissociation of XH{sub 2}{sup +} (X=B, C, N, O, F): Absolute cross sections for production of XH{sup +} and X{sup +} fragment ions

Absolute cross sections for electron-impact dissociation of XH{sub 2}{sup +} (X= B, C, N, O, F) producing XH{sup +} and X{sup +} ion fragments were measured in the 3- to 100-eV range using a crossed-electron-ion beams technique. Dissociative excitation of BD{sub 2}{sup +} and CH{sub 2}{sup +} producing B{sup +} and C{sup +}, respectively, show a propensity toward a two-body dissociation while the remaining species all tend to show a three-body dissociation dynamic. The BD{sup +} and CH{sup +} dissociative excitation channels show a large resonant-type contribution to the cross sections at {approx}10 eV. For the X{sup +} fragment ion production cross sections, a clear dependence on the threshold energy, as it relates to the rate of rise in the cross section above threshold, is observed.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ab initio-informed maximum entropy modeling of rovibrational relaxation and state-specific dissociation with application to the O{sub 2} + O system

Quasi-classical trajectory (QCT) calculations are used to study state-specific ro-vibrational energy exchange and dissociation in the O{sub 2} + O system. Atom-diatom collisions with energy between 0.1 and 20 eV are calculated with a double many body expansion potential energy surface by Varandas and Pais [Mol. Phys. 65, 843 (1988)]. Inelastic collisions favor mono-quantum vibrational transitions at translational energies above 1.3 eV although multi-quantum transitions are also important. Post-collision vibrational favoring decreases first exponentially and then linearly as Δv increases. Vibrationally elastic collisions (Δv = 0) favor small ΔJ transitions while vibrationally inelastic collisions have equilibrium post-collision rotational distributions. Dissociation exhibits both vibrational and rotational favoring. New vibrational-translational (VT), vibrational-rotational-translational (VRT) energy exchange, and dissociation models are developed based on QCT observations and maximum entropy considerations. Full set of parameters for state-to-state modeling of oxygen is presented. The VT energy exchange model describes 22 000 state-to-state vibrational cross sections using 11 parameters and reproduces vibrational relaxation rates within 30% in the 2500–20 000 K temperature range. The VRT model captures 80 × 10{sup 6} state-to-state ro-vibrational cross sections using 19 parameters and reproduces vibrational relaxation rates within 60% in the 5000–15 000 K temperature range. The developed dissociation model reproduces state-specific and equilibrium dissociation rates within 25% using just 48 parameters. The maximum entropy framework makes it feasible to upscale ab initio simulation to full nonequilibrium flow calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The dissociative chemisorption of water on Ni(111): Mode- and bond-selective chemistry on metal surfaces

A fully quantum approach based on an expansion in vibrationally adiabatic eigenstates is used to explore the dissociative chemisorption of H{sub 2}O, HOD, and D{sub 2}O on Ni(111). For this late barrier system, excitation of both the bending and stretching modes significantly enhances dissociative sticking. The vibrational efficacies vary somewhat from mode-to-mode but are all relatively close to one, in contrast to methane dissociation, where the behavior is less statistical. Similar to methane dissociation, the motion of lattice atoms near the dissociating molecule can significantly modify the height of the barrier to dissociation, leading to a strong variation in dissociative sticking with substrate temperature. Given a rescaling of the barrier height, our results are in reasonable agreement with measurements of the dissociative sticking of D{sub 2}O on Ni(111), for both laser-excited molecules with one or two quanta of excitation in the antisymmetric stretch and in the absence of laser excitation. Even without laser excitation, the beam contains vibrationally excited molecules populated at the experimental source temperature, and these make significant contributions to the sticking probability. At high collision energies, above the adiabatic barrier heights, our results correlate with these barrier heights and mode softening effects. At lower energies, dissociative sticking occurs primarily via vibrationally nonadiabatic pathways. We find a preference for O–H over O–D bond cleavage for ground state HOD molecules at all but the highest collision energies, and excitation of the O–H stretch gives close to 100% O–H selectivity at lower energies. Excitation of the O–D stretch gives a lower O–D cleavage selectivity, as the interaction with the surface leads to energy transfer from the O–D stretch into the O–H bond, when mode softening makes these vibrations nearly degenerate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalized adsorption isotherms for molecular and dissociative adsorption of a polar molecular species on two polar surface geometries: Perovskite (100) (Pm-3m) and fluorite (111) (Fm-3m)

Lattice based kinetic Monte Carlo simulations have been used to determine a functional form for the second order adsorption isotherms on two commonly investigated crystal surfaces: the (111) fluorite surface and the (100) perovskite surface which has the same geometric symmetry as the NaCl (100) surface. The functional form is generalized to be applicable to all values of the equilibrium constant by a shift along the pressure axis. Functions have been determined for estimating the pressure at which a desired coverage would be achieved and, conversely, for estimating the coverage at a certain pressure. The generalized form has been calculated by investigating the surface adsorbate coverage across a range of thermodynamic equilibrium constants that span the range 10{sup −26} to 10{sup 13}. The equations have been shown to be general for any value of the adsorption equilibrium constant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detection of Neutral CO Lost During Ionic Dissociation Using Atmospheric Pressure Thermal Dissociation Mass Spectrometry (APTD-MS)

Elucidation of ion dissociation patterns is particularly important to structural analysis by mass spectrometry (MS). However, typically, only the charged fragments from an ion dissociation event are detected in tandem MS experiments; neutrals are not identified. In recent years, we have developed an atmospheric pressure thermal dissociation (APTD) technique that can be applied to dissociate ions at atmosphere pressure and thus provide one way to characterize neutral fragments. In this paper, we focus on the detection of neutral CO resulting from amino acid and peptide ion dissociation. In the first set of experiments, several protonated amino acids (e.g., + 1 ion of phenylalanine) were found to undergo loss of a neutral (s) of total mass 46 Da, a process leading to iminium ion formation. We successfully detected the neutral species CO by using a CO sensor, UV-Vis and MS analysis following selective CO trapping with a rhodium complex. The capture of CO from dissociation of protonated amino acids supports the assignment of the loss of 46 Da to neutral losses of CO and H{sub 2}O, rather than loss of formaldehyde or dihydroxycarbene, other possible fragmentation pathways that have been subject of debate for a long time. In a second experiment, we used the APTD method in combination with the CO detection technique, to demonstrate the formation of CO in the conversion of b ions to a ions during peptide ion dissociations. These results showed the potential of APTD in the elucidation of ion dissociation mechanisms, using simple home-built apparatus. .

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluating Transport Properties and Ionic Dissociation of LiPF 6 in Concentrated Electrolyte

The presence of lithium hexafluorophosphate (LiPF 6 ) ion pairs in carbonate-based electrolyte solutions is widely accepted in the field of battery electrolyte research and is expected to affect solution transport properties. No existing techniques are capable of directly quantifying salt dissociation in these solutions. Previous publications by others have provided estimates of dissociation degrees using dilute solution theory and pulsed field gradient nuclear magnetic resonance spectroscopy (PFG-NMR) measurements of self-diffusivity. However, the behavior of a concentrated electrolyte solution can deviate significantly from dilute solution theory predictions. This paper, for the first time, instead uses Onsager–Stefan–Maxwell concentrated solution theory and the generalized Darken relation with PFG-NMR measurements to quantify the degrees of dissociation in electrolyte solutions (LiPF 6 in ethylene carbonate/diethyl carbonate, 1:1 by weight). At LiPF 6 concentrations ranging from 0.1 M to 1.5 M, the salt dissociation degree is found to range from 61% to 37%. Finally, transport properties are then calculated through concentrated solution theory with corrections for these significant levels of ion pairing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Au-C Interactions on the Catalytic Activity of Au Nanoparticles Supported on TiC(001) Towards Molecular Oxygen Dissociation

High-resolution photoemission and density functional calculations on realistic slab surface models were used to study the interaction and subsequent dissociation of O{sub 2} with Au nanoparticles supported on TiC(001). The photoemission results indicate that at 150 K O{sub 2} adsorbs molecularly on the supported gold nanoparticles, and upon heating to temperatures above 200 K the O{sub 2} {yields} 2O reaction takes place with migration of atomic oxygen to the TiC(001) substrate. The addition of Au to TiC(001) substantially enhances the rate of O{sub 2} dissociation at room temperature. The reactivity of Au nanoparticles supported on TiC(001) toward O{sub 2} dissociation is much larger than that of similar nanoparticles supported either on TiO{sub 2}(110) or MgO(001) surfaces, where the cleavage of O-O bonds is very difficult. Density functional calculations carried out on large supercells show that the contact of Au with TiC(001) is essential for charge polarization and an enhancement in the chemical activity of Au. Small two-dimensional particles which expose Au atoms in contact with TiC(001) are the most reactive. While O{sub 2} prefers binding to Au sites, the O atoms interact more strongly with the TiC(001) surface. The oxygen species active during the low-temperature (<200 K) oxidation of carbon monoxide on Au/TiC(001) is chemisorbed O{sub 2}. Once atomic O binds to TiC(001), the chemisorption bond is so strong that temperatures well above 400 K are necessary to remove the O adatoms from the TiC(001) substrate by direct reaction with CO. The high reactivity of Au/TiC(001) toward O{sub 2} at low-temperature opens the route for the transformation of alcohols and amines on the supported Au nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissociative Chemisorption and Oxidation of H 2 on the Stoichiometric IrO 2 (110) Surface

In this work, we investigated the dissociative chemisorption and oxidation of H 2 and D 2 on the stoichiometric IrO 2 (110) surface (“s-IrO 2 (110)”) using temperature programmed reaction spectroscopy (TPRS) and density functional theory (DFT) calculations. We find that the dissociative chemisorption of hydrogen occurs efficiently on s-IrO 2 (110) during adsorption at 90 K, with ~90% of the dissociated H 2 oxidizing to H 2 O during TPRS and evolving in a broad feature between 400 and 800 K. We also observe small quantities of H 2 desorbing in TPRS peaks at 200 K and 530 K, and show that these peaks arise from the desorption of molecularly-adsorbed H 2 and the recombination of atomic hydrogen, respectively. Our results demonstrate that H 2 dissociation on s-IrO 2 (110) occurs by a precursor-mediated mechanism wherein H 2 molecules adsorb strongly on coordinatively-unsaturated Ir atoms (Ircus) and the resulting σ-complexes then serve as precursors for H 2 bond cleavage. Our DFT calculations predict that H 2 adsorbs strongly on an atop-Ircus site, and that the H 2 complex can dissociate by a facile pathway involving H-transfer to a neighboring bridging O atom (Obr) to produce an H-Ircus/HObr pair. For this pathway, we predict that the energy barrier for dissociation is ~65 kJ/mol lower than the binding energy of the adsorbed H 2 complex. We also find that the total hydrogen uptake on s-IrO 2 (110) saturates at an H 2 coverage of ~0.65 ML during adsorption at 90 K, and present evidence that this limited uptake results from a strong influence of HObr groups on H 2 sigma-complex formation. Finally, we used DFT to examine pathways for H 2 O formation on s-IrO 2 (110) and find that steps leading directly to H 2 O formation are energetically demanding and likely determine the overall rate of H 2 oxidation on s-IrO 2 (110).

Dissociative Chemisorption↗

Ring Opening in Cycloheptane and Dissociation of 1-Heptene at High Temperatures

Cycloalkanes and alkenes are important components of real fuels but there is little kinetic and mechanistic data on the dissociation of most large cyclic and olefinic molecules at elevated temperatures. We present here the first experimental and theoretical investigation of dissociation of cycloheptane and the initial product from ring opening, 1-heptene. Experiments were performed in a diaphragmless shock tube using laser schlieren densitometry. Pyrolysis of cycloheptane (0.5-4% in Kr) was studied over 1450-2000 K and 30-120 Torr. Experiments with 1-heptene (1-4% in Kr) covered 1200-1650 K and 30-120 Torr. A newly developed chemical kinetic mechanism for pyrolysis of cycloheptane and 1-heptene is presented herein. Simulations are in very good agreement with the experimental measurements. Rate coefficients for the initial ring-opening process in cycloheptane, k 1 , and dissociation of 1-heptene, k 2 , were determined from the experiments. Both k 1 and k 2 are in falloff, and the pressure and temperature dependencies were well reproduced by theoretical calculations allowing extrapolation to conditions beyond the scope of this work. These calculations yielded the following expressions for k 1 and k 2 with the uncertainties estimated as +/- 40% and +/- 50% respectively: k 1 , infinity = 5 . 94 & times; 10 17 exp ( & minus;44 T, 521 ) s & minus;1 and k 2 , infinity = 8 . 86 & times; 10 16 exp ( & minus;35 , 887 T ) s & minus;1 . The results of this study indicate that cycloheptane dissociates similarly to cyclopentane and cyclohexane, i.e. ring-opening via C -C scission to a diradical that rapidly isomerizes to a conjugate 1-alkene. The secondary chemistry is dominated by the dissociation products of the 1-alkenes i.e. allyl and n-alkyl radicals. Furthermore, rates of dissociation of the cycloalkanes are size dependent and k cyclopentane << k cyclohexane < k cycloheptane . (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Chemical kinetics↗