Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed-memory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

ScaWL: Scaling k-WL (Weisfeiler-Lehman) Algorithms in Memory and Performance on Shared and Distributed-Memory Systems

The k-dimensional Weisfeiler-Lehman (k-WL) algorithm—developed as an efficient heuristic for testing if two graphs are isomorphic—is a fundamental kernel for node embedding in the emerging field of graph neural networks. Unfortunately, the k-WL algorithm has exponential storage requirements, limiting the size of graphs that can be handled. This work presents a novel k-WL scheme with a storage requirement orders of magnitude lower while maintaining the same accuracy as the original k-WL algorithm. Due to the reduced storage requirement, our scheme allows for processing much bigger graphs than previously possible on a single compute node. For even bigger graphs, we provide the first distributed-memory implementation. Our k-WL scheme also has significantly reduced communication volume and offers high scalability. Our experimental results demonstrate that our approach is significantly faster and has superior scalability compared to five other implementations employing state-of-the-art techniques.

algorithims↗
NASA NTRS1991

Studies of electron collisions with polyatomic molecules using distributed-memory parallel computers

Elastic electron scattering cross sections from 5-30 eV are reported for the molecules C2H4, C2H6, C3H8, Si2H6, and GeH4, obtained using an implementation of the Schwinger multichannel method for distributed-memory parallel computer architectures. These results, obtained within the static-exchange approximation, are in generally good agreement with the available experimental data. These calculations demonstrate the potential of highly parallel computation in the study of collisions between low-energy electrons and polyatomic gases. The computational methodology discussed is also directly applicable to the calculation of elastic cross sections at higher levels of approximation (target polarization) and of electronic excitation cross sections.

Winstead, C.↗
NASA NTRS1991

Parallel computation of aerodynamic influence coefficients for aeroelastic analysis on a transputer network

Aeroelastic analysis is mult-disciplinary and computationally expensive. Hence, it can greatly benefit from parallel processing. As part of an effort to develop an aeroelastic analysis capability on a distributed-memory transputer network, a parallel algorithm for the computation of aerodynamic influence coefficients is implemented on a network of 32 transputers. The aerodynamic influence coefficients are calculated using a three-dimensional unsteady aerodynamic model and a panel discretization. Efficiencies up to 85 percent are demonstrated using 32 processors. The effects of subtask ordering, problem size and network topology are presented. A comparison to results on a shared-memory computer indicates that higher speedup is achieved on the distributed-memory system.

Janetzke, D. C.↗
DOE OSTI2024

DyG-DPCD: A Distributed Parallel Community Detection Algorithm for Large-Scale Dynamic Graphs

Dynamic (Temporal) graphs capture the valuable evolution of real-world systems, from the continuously evolving patterns of social interactions and genetic pathways to the dynamic fluctuations of economic forces. Detecting communities for such evolving networks poses unique challenges. Detecting and analyzing the evolution of communities within dynamic graphs unlocks valuable insights into the underlying structural and temporal patterns of real-world systems. However, the sheer volume of modern graph data and the inherent complexity of the temporal dimension pose significant challenges to scalable community detection algorithms. Addressing this gap, our work explores the limited landscape of scalable distributed-memory parallel methods specifically designed for dynamic network community detection. We propose a novel parallel algorithm, DyG-DPCD (Dynamic Graph Distributed Parallel Community Detection), to detect communities in dynamic networks using the Message Passing Interface (MPI) framework. We present a vertex-centric approach, allowing us to detect communities through local optimization. Furthermore, we enhance our baseline algorithm by incorporating three heuristics, which improve the algorithm’s performance significantly while maintaining the quality of the solutions. We demonstrate the efficiency of our algorithm by experimenting on several real-world large-scale networks with hundreds of millions of edges spanning diverse domains. Notably, DyG-DPCD achieves speedups between 25× and 30× for large networks that we experimented on using NERSC compute nodes. In conclusion, our algorithm outperforms the STINGER parallel re-agglomeration algorithm by 30×.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Computing material volume fractions on a superimposed mesh as applied to Monte Carlo particle transport simulations

Here, we present a newly implemented ray tracing algorithm in OpenMC for efficiently computing material volume fractions on superimposed meshes in complex geometries. By firing rays along each coordinate direction through the geometry, the approach accumulates track-length data in each mesh element, thereby determining the fractional composition of each material. Scaling studies on three different models—a random tetrahedra configuration, the Frascati Neutron Generator ITER dose rate benchmark, and a stellarator design—show excellent parallel performance, with nearly linear speedup on modern multi-threaded and distributed-memory systems. An analysis of the residual error relative to high-resolution reference solutions demonstrated that under optimal conditions it decreases as 1/R, where R is the number of rays fired, making it straightforward to achieve user-prescribed accuracy. This new functionality enables practical, mesh-based approaches for detailed nuclear analyses in production Monte Carlo workflows without resorting to expensive, fully conformal or unstructured meshing.

Monte Carlo↗
DOE OSTI2025

LATTE: open-source, high-performance traveltime computation, tomography and source location in acoustic and elastic media

Traveltime-based tomography and source location are fundamental approaches for imaging subsurface structures and understanding the spatiotemporal distribution of seismicity from local to global scales. We present an open-source, high-performance framework integrating eikonal equation solvers and adjoint-state theory for traveltime computation, velocity tomography, source location and joint tomography-location in 2-D/3-D acoustic and elastic media. We introduce novel regularization schemes based on total generalized p-variation, structural similarity and multitask machine learning to enhance the fidelity and interpretability of inverted models and source locations. Key features of our implementation also include the ability to leverage both absolute-difference and double-difference traveltime misfits for high-fidelity velocity tomography and source parameter estimation; support for traveltime computation and inversion in diverse 2-D/3-D scenarios with arbitrary source and receiver distributions; and a perturbation-based optimal step-size estimation method to reduce computational costs. In addition, our implementation employs shared-memory and distributed-memory parallelization to provide an efficient solution for traveltime computation, tomography, and source location. In conclusion, we validate the efficacy and accuracy of our approach through multiple synthetic data examples.

58 GEOSCIENCES↗
DOE OSTI2024

MassiveGNN: Efficient Training via Prefetching for Massively Connected Distributed Graphs

Graph Neural Networks (GNN) are indispensable in learning from graph-structured data, yet their rising computational costs, especially on massively connected graphs, pose significant challenges in terms of execution performance. To tackle this, distributed-memory solutions such as partitioning the graph to concurrently train multiple replicas of GNNs are in practice. However, approaches requiring a partitioned graph usually suffer from communication overhead and load imbalance, even under optimal partitioning and communication strategies due to irregularities in the neighborhood minibatch sampling. This paper proposes practical trade-offs for improving the sampling and communication overheads for representation learn- ing on distributed graphs (using popular GraphSAGE architecture) by developing a parameterized prefetch and eviction scheme on top of the state-of-the-art Amazon DistDGL distributed GNN framework, demonstrating about 15–40% improvement in end-to-end training performance on the NERSC Perlmutter supercomputer for various OGB datasets.

Machine Leanring, high performance comptuing, grap↗
DOE OSTI2025

Communication Lower Bounds and Optimal Algorithms for Symmetric Matrix Computations

In this article, we focus on the communication costs of three symmetric matrix computations: (i) multiplying a matrix with its transpose, known as a symmetric rank-k update (SYRK) (ii) adding the result of the multiplication of a matrix with the transpose of another matrix and the transpose of that result, known as a symmetric rank-2k update (SYR2K) (iii) performing matrix multiplication with a symmetric input matrix (SYMM). All three computations appear in the Level 3 Basic Linear Algebra Subroutines (BLAS) and have wide use in applications involving symmetric matrices. We establish communication lower bounds for these kernels using sequential and distributed-memory parallel computational models, and we show that our bounds are tight by presenting communication-optimal algorithms for each setting. Our lower bound proofs rely on applying a geometric inequality for symmetric computations and analytically solving constrained nonlinear optimization problems. As a result, the symmetric matrix and its corresponding computations are accessed and performed according to a triangular block partitioning scheme in the optimal algorithms.

Al Daas, Hussam [Rutherford Appleton Laboratory, D↗
DOE OSTI2025

New Results on Communication- and Memory-Aware Load Balancing Model and Algorithms

While load balancing in distributed-memory computing has been well-studied, we present an innovative approach to this problem: a unified, reduced-order model that combines three key components to describe “work” in a distributed system: computation, communication, and memory. Our model enables an optimizer to explore complex tradeoffs in task placement, such as augmented parallelism, at the expense of data replication increasing memory usage. We propose a fully distributed, heuristic-based load balancing optimization algorithm, and demonstrate that it quickly finds close-to-optimal solutions. We formalize the complex optimization problem as a mixed-integer linear program, and compare it to our strategy. Finally, we show that when applied to an electromagnetics code, our approach obtains up to 2.3x speedups for the imbalanced execution.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Xyce™ Parallel Electronic Simulator Users’ Guide, Version 7.10

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator, and has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability over the current state-of-the-art in the following areas: • Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). This includes support for most popular parallel and serial computers. • A differential-algebraic-equation (DAE) formulation, which better isolates the device model package from solver algorithms. This allows one to develop new types of analysis without requiring the implementation of analysis-specific device models. • Device models that are specifically tailored to meet Sandia’s needs, including some radiation-aware devices (for Sandia users only). • Object-oriented code design and implementation using modern coding practices. Xyce is a parallel code in the most general sense of the phrase — a message passing parallel implementation — which allows it to run efficiently a wide range of computing platforms. These include serial, shared-memory and distributed-memory parallel platforms. Attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Parallel Programming in MCNP6

Monte Carlo N-Particle (MCNP)1 is a general-purpose Monte Carlo particle transport code developed by Los Alamos National Laboratory (LANL). To efficiently handle long simulations, MCNP version 6 (MCNP6) supports parallel execution using two primary programming models: • Shared-memory task-based threading using OpenMP (Open Multi-Processing), and • Distributed-memory calculations using MPI (Message Passing Interface). The OpenMP and MPI programming models enable MCNP6 to scale from desktop systems to high-performance computing (HPC) clusters, allowing users to run MCNP in one of three parallel modes: • OpenMP-only, • MPI-only, and • Hybrid (MPI + OpenMP). The choice of parallelization mode depends on the underlying computer architecture and the characteristics of the simulation problem.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Exact signed distance fields using parallel Fast Sweeping Method

Signed distance fields are often used in multiphysics simulations to track material interfaces. We present a simple methodology based on the fast sweeping method to generate the exact signed distance from triangular meshes and linear paths on Cartesian grids. The methodology propagates the closest primitive to the boundary to the rest of the domain following the characteristics. A local upwind criterion is used to decide between the new and existing closest primitive at each grid point while capturing the correct sign of the global function. The methodology has optimal computational complexity and runs efficiently in distributed-memory architectures. We include 2D and 3D test cases along with a resolution study up to 0.512 trillion zones and 1,000 computer cores. The solution strategy can also be applied to other types of meshes or collections of primitives.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Unitary Qubit Lattice Algorithms for Plasma Physics

This final technical report summarizes research conducted under DOE Award DE-SC0021653 to develop unitary Quantum Lattice Algorithms for modeling electromagnetic wave propagation and scattering in complex media, including plasmas. The project developed and validated quantum-inspired formulations of Maxwell's equations that preserve unitary evolution and can be evaluated on classical high-performance computing systems while providing a foundation for future quantum-computing implementations. Major accomplishments include the development of two- and three-dimensional algorithms for electromagnetic scattering; scalable, distributed-memory implementations demonstrated on the Perlmutter supercomputer; formulations for nonlinear lossless fluid dynamics and cold, lossless, inhomogeneous magnetized plasmas; and an explicit quantum algorithm for a time-discretized Lorenz model. Simulations reproduced a range of characteristic wave phenomena, including transient effects that are not readily apparent in conventional frequency-domain studies, demonstrating the effectiveness of the proposed approach for modeling complex electromagnetic and plasma systems. The work establishes a unified theoretical and computational framework for quantum and quantum-inspired simulation and provides a foundation for future implementation on fault-tolerant quantum systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Parallel Runtime Interface for Fortran (PRIF) Specification (Rev. 0.5)

This document specifies an interface to support the parallel features of Fortran, named the Parallel Runtime Interface for Fortran (PRIF). PRIF is a proposed solution in which the runtime library is primarily responsible for implementing coarray allocation, deallocation and accesses, image synchronization, atomic operations, events, teams and collective subroutines. In this interface, the compiler is responsible for transforming the invocation of Fortran-level parallel features into procedure calls to the necessary PRIF subroutines. The interface is designed for portability across shared- and distributed-memory machines, different operating systems, and multiple architectures. Implementations of this interface are intended as an augmentation for the compiler's own runtime library. With an implementation-agnostic interface, alternative parallel runtime libraries may be developed that support the same interface. One benefit of this approach is the ability to vary the communication substrate. A central aim of this document is to define a parallel runtime interface in standard Fortran syntax, which enables us to leverage Fortran to succinctly express various properties of the procedure interfaces, including argument attributes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Parallel Runtime Interface for Fortran (PRIF) Specification (Rev. 0.6)

This document specifies an interface to support the multi-image parallelism features of Fortran, named the Parallel Runtime Interface for Fortran (PRIF). PRIF is a solution in which a runtime library is primarily responsible for implementing coarray allocation, deallocation and accesses, image synchronization, atomic operations, events, teams and collective subroutines. The Fortran compiler is responsible for transforming the invocation of Fortran-level multi-image parallelism features into procedure calls to the necessary PRIF subroutines. The interface is designed for portability across shared- and distributed-memory machines, different operating systems, and multiple architectures. Implementations of this interface are intended as an augmentation for the compiler's own runtime library. With an implementation-agnostic interface, alternative parallel runtime libraries may be developed that support the same interface. One benefit of this approach is the ability to vary the communication substrate. A central aim of this document is to define a parallel runtime interface in standard Fortran syntax, which enables us to leverage Fortran to succinctly express various properties of the procedure interfaces, including argument attributes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Parallel Runtime Interface for Fortran (PRIF): A Multi-Image Solution for LLVM Flang

Fortran compilers that provide support for Fortran’s native parallel features often do so with a runtime library that depends on details of both the compiler implementation and the communication library, while others provide limited or no support at all. This paper introduces a new generalized interface that is both compiler- and runtime-library-agnostic, providing flexibility while fully supporting all of Fortran’s parallel features. The Parallel Runtime Interface for Fortran (PRIF) was developed to be portable across shared- and distributed-memory systems, with varying operating systems, toolchains and architectures. It achieves this by defining a set of Fortran procedures corresponding to each of the parallel features defined in the Fortran standard that may be invoked by a Fortran compiler and implemented by a runtime library. PRIF aims to be used as the solution for LLVM Flang to provide parallel Fortran support. This paper also briefly describes our PRIF prototype implementation: Caffeine.

Bonachea, Dan↗
NASA NTRS1990

Parallel simulated annealing algorithms for cell placement on hypercube multiprocessors

Two parallel algorithms for standard cell placement using simulated annealing are developed to run on distributed-memory message-passing hypercube multiprocessors. The cells can be mapped in a two-dimensional area of a chip onto processors in an n-dimensional hypercube in two ways, such that both small and large cell exchange and displacement moves can be applied. The computation of the cost function in parallel among all the processors in the hypercube is described, along with a distributed data structure that needs to be stored in the hypercube to support the parallel cost evaluation. A novel tree broadcasting strategy is used extensively for updating cell locations in the parallel environment. A dynamic parallel annealing schedule estimates the errors due to interacting parallel moves and adapts the rate of synchronization automatically. Two novel approaches in controlling error in parallel algorithms are described: heuristic cell coloring and adaptive sequence control.

Banerjee, Prithviraj↗
NASA NTRS1992

Electrostatic Particle-In-Cell Code For Hypercube Computer

Code simulates two-dimensional motions of plasma particles in self-consistent electrostatic field and externally applied magnetic field developed for execution on Mark IIIfp hypercube computer. Based on generalization of one-dimensional particle-in-cell algorithm applicable to many different parallel computing architectures. Intermediate product of continuing effort to speed particle-in-cell computations by taking advantage of distributed-memory parallel computers like those of hypercube class.

Ferraro, Robert D.↗