SEARCH · Search NASA
Results for “Draft Requirements”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Space-Based Point Design for Global Coherent Doppler Wind Lidar Profiling Matched to the Recent NASA/NOAA Draft Science Requirements
An end-to-end point design, including lidar, orbit, scanning, atmospheric, and data processing parameters, for space-based global profiling of atmospheric wind will be presented. The point design attempts to match the recent NASA/NOAA draft science requirements for wind measurement.
A Path to Planetary Protection Requirements for Human Exploration: A Literature Review and Systems Engineering Approach
As systems, technologies, and plans for the human exploration of Mars and other destinations beyond low Earth orbit begin to coalesce, it is imperative that frequent and early consideration is given to how planetary protection practices and policy will be upheld. While the development of formal planetary protection requirements for future human space systems and operations may still be a few years from fruition, guidance to appropriately influence mission and system design will be needed soon to avoid costly design and operational changes. The path to constructing such requirements is a journey that espouses key systems engineering practices of understanding shared goals, objectives and concerns, identifying key stakeholders, and iterating a draft requirement set to gain community consensus. This paper traces through each of these practices, beginning with a literature review of nearly three decades of publications addressing planetary protection concerns with respect to human exploration. Key goals, objectives and concerns, particularly with respect to notional requirements, required studies and research, and technology development needs have been compiled and categorized to provide a current 'state of knowledge'. This information, combined with the identification of key stakeholders in upholding planetary protection concerns for human missions, has yielded a draft requirement set that might feed future iteration among space system designers, exploration scientists, and the mission operations community. Combining the information collected with a proposed forward path will hopefully yield a mutually agreeable set of timely, verifiable, and practical requirements for human space exploration that will uphold international commitment to planetary protection.
Program requirements for the DRAFT 2 system, revision A
Program requirements for DRAFT 2 system
Coordination and Cooperation to Achieve the GEOSS Space Segment: A Systems Approach
Established in April 2007, the SEO has made significant accomplishments in the support of CEOS and the virtual constellations. These accomplishments include (1) constellation trade studies for Atmospheric Composition and Land Surface Imaging, (2) a new engineering framework for requirements definition, assessment and architecture planning, (3) completion of a draft requirements document and gap analysis for the Atmospheric Composition Virtual Constellation, and (4) the development of a DVD video highlighting CEOS and the Virtual Constellation concept.
Unmitigated ACES Simulation Supporting Draft DAA MOPS Alerting
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements for DAA alerting system performance. A recent study conducted using NASA's ACES (Airspace Concept Evaluation System) simulation capability begins to address questions surrounding the development of draft MOPS for DAA alerting systems. ACES simulations were conducted to study the performance of an alerting scheme proposed by the SC-228 DAA Alerting sub-group. Analysis included but was not limited to: 1) correct alert (and their timeliness), 2) false alert (and their severity and duration), 3) missed alert, and 4) probability of an alert type at the time of loss of well clear. The results will be used by SC-228 to inform decisions about the alerting aspect of UAS DAA systems and future requirements development and validation efforts.
Analysis of UAS DAA Alerting in Fast-Time Simulations without DAA Mitigation
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements for DAA alerting system performance. A recent study conducted using NASA's ACES (Airspace Concept Evaluation System) simulation capability begins to address questions surrounding the development of draft MOPS for DAA alerting systems. ACES simulations were conducted to study the performance of alerting systems proposed by the SC-228 DAA Alerting sub-group. Analysis included but was not limited to: 1) correct alert (and timeliness), 2) false alert (and severity and duration), 3) missed alert, and 4) probability of an alert type at the time of loss of well clear. The performance of DAA alerting systems when using intent vs. dead-reckoning for UAS ownship trajectories was also compared. The results will be used by SC-228 to inform decisions about the surveillance standards of UAS DAA systems and future requirements development and validation efforts.
Analysis of UAS DAA Surveillance in Fast-Time Simulations without DAA Mitigation
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements for DAA surveillance system performance. A recent study conducted using NASA's ACES (Airspace Concept Evaluation System) simulation capability begins to address questions surrounding the development of draft MOPS for DAA surveillance systems. ACES simulations were conducted to study the performance of sensor systems proposed by the SC-228 DAA Surveillance sub-group. Analysis included but was not limited to: 1) number of intruders (both IFR and VFR) detected by all sensors as a function of UAS flight time, 2) number of intruders (both IFR and VFR) detected by radar alone as a function of UAS flight time, and 3) number of VFR intruders detected by all sensors as a function of UAS flight time. The results will be used by SC-228 to inform decisions about the surveillance standards of UAS DAA systems and future requirements development and validation efforts.
ACES Study of DAA-Mitigated UAS Operations SC-228 Requirements Sub Group
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. A recent study conducted using NASA's ACES (Airspace Concept Evaluation System) simulation capability begins to address questions surrounding the development of draft MOPS for DAA systems by assessing DAA performance in a NAS-wide context. ACES analyses were conducted to determine the impact of varying elements of UAS pilot performance and uncertainty mitigations on DAA system performance. Simulations were conducted with recorded cooperative and non-cooperative VFR (Visual Flight Rules) traffic to accurately model UAS encounters with other NAS traffic (ATC (Air Traffic Control) being responsible for separation with other IFR (Instrument Flight Rules) aircraft) and with roughly 25, 000 simulated UAS operations The number of Loss of Well Clear (LoWC) events were recorded across the range of independent variables: pilot response time, horizontal LoWC prediction buffer and horizontal LoWC resolution buffer. The number of LoWC events was compared to the unmitigated case (without the benefit of a DAA system) to determine the resultant risk-ratio for each of 8 simulation conditions. The parameter trades presented by the resultant DAA system performance (risk ratio) will be used by SC 228 to inform decisions about future requirements development and validation efforts.
Airspace Safety Threshold Study: Status Update to SC-228 DAA Safety Sub-Group
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228, is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. A recent study conducted using NASA's ACES (Airspace Concept Evaluation System) simulation capability begins to address questions surrounding the development of draft MOPS for DAA systems. ACES analyses were conducted to determine: 1) the rate at which IFR aircraft encounter other IFR and VFR aircraft, and 2) the rate at which UAS aircraft encounter VFR aircraft. Five different separation thresholds were used (two for encounter and one each for well-clear, near mid-air collision, and closest point of approach). The results will be used by SC228 to inform decisions about the safety aspect of UAS DAA systems and future requirements development and validation efforts.
Mission-oriented requirements for updating MIL-H-8501: Calspan proposed structure and rationale
This report documents the effort by Arvin/Calspan Corporation to formulate a revision of MIL-H-8501A in terms of Mission-Oriented Flying Qualities Requirements for Military Rotorcraft. Emphasis is placed on development of a specification structure which will permit addressing Operational Missions and Flight Phases, Flight Regions, Classification of Required Operational Capability, Categorization of Flight Phases, and Levels of Flying Qualities. A number of definitions is established to permit addressing the rotorcraft state, flight envelopes, environments, and the conditions under which degraded flying qualities are permitted. Tentative requirements are drafted for Required Operational Capability Class 1. Also included is a Background Information and Users Guide for the draft specification structure proposed for the MIL-H-8501A revision. The report also contains a discussion of critical data gaps and attempts to prioritize these data gaps and to suggest experiments that should be performed to generate data needed to support formulation of quantitative design criteria for the additional Operational Capability Classes 2, 3, and 4.
NASA Low Visibility Landing and Surface Operations (LVLASO) Atlanta Demonstration: Surveillance Systems Performance Analysis
NASA conducted a series of flight experiments at Hartsfield Atlanta International Airport as part of the Low Visibility Landing and Surface Operations (LVLASO) Program. LVLASO is one of the subelements of the NASA Terminal Area Productivity (TAP) Program, which is focused on providing technology and operating procedures for achieving clear-weather airport capacity in instrument-weather conditions, while also improving safety. LVLASO is investigating various technologies to be applied to airport surface operations, including advanced flight deck displays and surveillance systems. The purpose of this report is to document the performance of the surveillance systems tested as part of the LVLASO flight experiment. There were three surveillance sensors tested: primary radar using Airport Surface Detection Equipment (ASDE-3) and the Airport Movement Area Safety System (AMASS), Multilateration using the Airport Surface Target Identification System (ATIDS), and Automatic Dependent Surveillance - Broadcast (ADS-B) operating at 1090 MHz. The performance was compared to the draft requirements of the ICAO Advanced Surface Movement Guidance and Control System (A-SMGCS). Performance parameters evaluated included coverage, position accuracy, and update rate. Each of the sensors was evaluated as a stand alone surveillance system.
Consistency Across Standards or Standards in a New Business Model
Presentation topics include: standards in a changing business model, the new National Space Policy is driving change, a new paradigm for human spaceflight, consistency across standards, the purpose of standards, danger of over-prescriptive standards, a balance is needed (between prescriptive and general standards), enabling versus inhibiting, characteristics of success-oriented standards, characteristics of success-oriented standards, and conclusions. Additional slides include NASA Procedural Requirements 8705.2B identifies human rating standards and requirements, draft health and medical standards for human rating, what's been done, government oversight models, examples of consistency from anthropometry, examples of inconsistency from air quality and appendices of government and non-governmental human factors standards.
Flight Test 4 Preliminary Results: NASA Ames SSI
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. The Unmanned Aircraft System (UAS) Integration into the National Airspace System (NAS) Project conducted flight test program, referred to as Flight Test 4, at Armstrong Flight Research Center from April -June 2016. Part of the test flights were dedicated to the NASA Ames-developed Detect and Avoid (DAA) System referred to as JADEM (Java Architecture for DAA Extensibility and Modeling). The encounter scenarios, which involved NASA's Ikhana UAS and a manned intruder aircraft, were designed to collect data on DAA system performance in real-world conditions and uncertainties with four different surveillance sensor systems. Flight test 4 has four objectives: (1) validate DAA requirements in stressing cases that drive MOPS requirements, including: high-speed cooperative intruder, low-speed non-cooperative intruder, high vertical closure rate encounter, and Mode CS-only intruder (i.e. without ADS-B), (2) validate TCASDAA alerting and guidance interoperability concept in the presence of realistic sensor, tracking and navigational errors and in multiple-intruder encounters against both cooperative and non-cooperative intruders, (3) validate Well Clear Recovery guidance in the presence of realistic sensor, tracking and navigational errors, and (4) validate DAA alerting and guidance requirements in the presence of realistic sensor, tracking and navigational errors. The results will be presented at RTCA Special Committee 228 in support of final verification and validation of the DAA MOPS.
ACES M and S: Unmitigated Factorial Encounter Study on DAA/TCAS Interoperability
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements for DAA alerting and guidance systems. This presentation contains the results of two combinatorial encounter analysis studies using NASA's SAA Control fast-time simulation capability for this purpose. In these studies, encounters between two aircraft were simulated one at a time for the full factorial combination of encounter geometries (e.g., encounter angle, CPA offset) and aircraft performance (e.g., ownership and intruder ground speeds and vertical rates). The first study analyzes the relationships (e.g., timeline) between the different alerting-safety regions in the SC-228 MOPS (in order of increasing severity): 1) DAA warning alert, 2) well clear recovery (WCR) guidance, 3) DAA-Collision Avoidance (CA), and 4) TCAS RA. This study will focus primarily on encounter situations in which TCAS RA occurs prior to any of the other alerting-safety boundaries. In particular, this study will investigate whether using vertical distance or vertical distance at closest point of approach (i.e., vertical miss distance or VMD) is more appropriate for the definition of the DAA-CA region. In addition, cases where transitions between different regions skip an intermediate region will be analyzed. The second study in this presentation explores a proposal to use an altitude rate error threshold to determine if vertical maneuvers are acceptable for DAA WCR guidance against non-cooperative intruders. This study incorporates the radar from the Honeywell sensor model and examines a series of pairwise encounters between a non-cooperative intruder and a UAS ownship, with different combinations of intruder states and ownship performance levels. The study uses SAA Control as a simulation platform and pilot model, and Omnibands to provide DWC recovery guidance. Two simulation sets, one that allows vertical DWC recovery guidance and one that does not, are compared to determine if encounters with altitude rate errors above 250 feet-per-minute are more likely to have more severe losses of well clear, as determined by the Loss of Well-Clear Severity metric.
Airspace Safety Threshold Study: NAS-Wide Encounter Rate Evaluation Using Historical Radar Data and ACES
Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 (SC-228) is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. With regard to the safety aspect being studied by the SC-228 DAA Safety sub-group, NASA has conducted a study using the ACES (Airspace Concept Evaluation System) simulation capability to determine: 1) the rate at which IFR aircraft encounter other IFR and VFR aircraft, and 2) the rate at which UAS aircraft encounter VFR aircraft as well as the corresponding encounter geometries. Five different separation thresholds were used (two for encounter and one each for well-clear, near mid-air collision, and closest point of approach). The results will be used by the SC-228 DAA Safety sub-group to inform decisions about the safety aspect of UAS DAA systems and future requirements development and validation efforts.
Vision and Objectives
The purpose of Industry Day is to exchange information with industry to increase understanding of the Government's current vision and objectives for the xEVA Production and Services Contract. The presentation provides industry with the opportunity to provide input into the xEVAPS procurement strategy and encourage offerors to submit questions and comments. A technical overview of the xEVA System serves as the foundation for the content related to draft requirements in the SOW.
Requirements and Waivers
Good requirements are the first step for good communications, and good communications are central to insure an understanding between the customer and contractor. Failure to generate good requirements is unfortunately commonplace and repeated. Waivers to requirements are discussed from a risk based point of view. The assumption that every requirement will eventually be waived is used to establish a critical review of a draft safety requirement. Validation methods of requirements are addressed. Value added that safety requirements contribute to the Project is estimated to further our critical review of draft requirements.