Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic stiffness removal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Dynamic stiffness removal for direct numerical simulations

A systematic approach was developed to derive non-stiff reduced mechanisms for direct numerical simulations (DNS) with explicit integration solvers. The stiffness reduction was achieved through on-the-fly elimination of short time-scales induced by two features of fast chemical reactivity, namely quasi-steady-state (QSS) species and partial-equilibrium (PE) reactions. The sparse algebraic equations resulting from QSS and PE approximations were utilized such that the efficiency of the dynamic stiffness reduction is high compared with general methods of time-scale reduction based on Jacobian decomposition. Using the dimension reduction strategies developed in our previous work, a reduced mechanism with 52 species was first derived from a detailed mechanism with 561 species. The reduced mechanism was validated for ignition and extinction applications over the parameter range of equivalence ratio between 0.5 and 1.5, pressure between 10 and 50 atm, and initial temperature between 700 and 1600 K for ignition, and worst-case errors of approximately 30% were observed. The reduced mechanism with dynamic stiffness removal was then applied in homogeneous and 1-D ignition applications, as well as a 2-D direct numerical simulation of ignition with temperature inhomogeneities at constant volume with integration time-steps of 5-10 ns. The integration was numerically stable and good accuracy was achieved. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An iterative dynamic chemical stiffness removal method for reacting flow simulations

Abstract An iterative dynamic chemical stiffness removal method (IDCSR) based on quasi-steady-state approximation (QSSA) is proposed. The IDCSR method is built on a previously developed non-iterative method which has proved to work well for small timestep sizes. A novel iterative procedure is designed in IDCSR to enable explicit time integration of stiff chemistry at relatively large timestep sizes relevant to practical reacting flow simulations. The effectiveness of the iterative procedure is first demonstrated with a toy problem and homogeneous auto-ignition with fixed integration step sizes, showing that larger timestep sizes can be allowed for explicit time integration using IDCSR compared with the previous non-iterative method. IDCSR is then compared with existing explicit chemistry solvers for simulations of homogeneous auto-ignition and shows similar or lower computational cost but significantly higher accuracy across a wide range of timestep sizes. IDCSR is further combined with an automatic adaptive time-stepping scheme for simulations of 0-D homogeneous auto-ignition and a 2-D laminar lifted n -dodecane jet flame. For the 0-D auto-ignition simulations, IDCSR is shown to reduce both the error (by 43%–90%) and computational cost (by 6–15 times) compared with existing explicit solvers, while achieving speed-up factors of up to 400 compared with VODE for a wide range of timestep sizes and reaction mechanisms. For the 2-D jet flame simulations, speed-up factors of 15 and 31 for chemistry integration, and 5 and 9 for overall simulation, are achieved by IDCSR compared with CVODE with and without analytic Jacobian, respectively.

Xu, Chao (ORCID:0000000153074159)↗

Model reduction in the physical coordinate system

In the dynamics modeling of a flexible structure, finite element analysis employs reduction techniques, such as Guyan's reduction, to remove some of the insignificant physical coordinates, thus producing a dynamics model that has smaller mass and stiffness matrices. But this reduction is limited in the sense that it removes certain degrees of freedom at a node points themselves in the model. From the standpoint of linear control design, the resultant model is still too large despite the reduction. Thus, some form of the model reduction is frequently used in control design by approximating a large dynamical system with a fewer number of state variables. However, a problem arises from the placement of sensors and actuators in the reduced model, because a model usually undergoes, before being reduced, some form of coordinate transformations that do not preserve the physical meanings of the states. To correct such a problem, a method is developed that expresses a reduced model in terms of a subset of the original states. The proposed method starts with a dynamic model that is originated and reduced in finite element analysis. Then the model is converted to the state space form, and reduced again by the internal balancing method. At this point, being in the balanced coordinate system, the states in the reduced model have no apparent resemblance to those of the original model. Through another coordinate transformation that is developed, however, this reduced model is expressed by a subset of the original states.

Yae, K. Harold↗

Structural Determinants of Cadherin-23 Function in Hearing and Deafness

The hair-cell tip link, a fine filament directly conveying force to mechanosensitive transduction channels, is composed of two proteins, protocadherin-15 and cadherin-23, whose mutation causes deafness. However, their molecular structure, elasticity, and deafness-related structural defects are unknown. We present crystal structures of the first and second extracellular cadherin repeats of cadherin-23. Overall, structures show typical cadherin folds, but reveal an elongated N terminus that precludes classical cadherin interactions and contributes to an N-terminal Ca{sup 2+}-binding site. The deafness mutation D101G, in the linker region between the repeats, causes a slight bend between repeats and decreases Ca{sup 2+} affinity. Molecular dynamics simulations suggest that cadherin-23 repeats are stiff and that either removing Ca{sup 2+} or mutating Ca{sup 2+}-binding residues reduces rigidity and unfolding strength. The structures define an uncharacterized cadherin family and, with simulations, suggest mechanisms underlying inherited deafness and how cadherin-23 may bind with itself and with protocadherin-15 to form the tip link.

36 MATERIALS SCIENCE↗

An Experimental Investigation of the Effects of Mach Number, Stabilizer Dihedral, and Fin Torsional Stiffness on the Transonic Flutter Characteristics of a Tee-Tail

A transonic flutter investigation was made of elastically and dynamically scaled models of the tee-tail of a patrol bomber. It was found that removal of the 15 deg. dihedral of the stabilizer used on the airplane raised the flutter boundary to higher dynamic pressures. The effect of Mach number on the flutter boundary was different for dihedral angles of 0 and 15 deg. The dynamic pressure at the flutter boundary increased approximately linearly with the torsional stiffness of the fin. High-speed motion pictures indicated that the flutter mode consisted primarily of fin bending and fin torsion.

Land, Norman S.↗

Digital simulation of stiff linear dynamic systems.

A method is derived for digital computer simulation of linear time-invariant systems when the insignificant eigenvalues involved in such systems are eliminated by an ALSAP root removal technique. The method is applied to a thirteenth-order dynamic system representing a passive RLC network.

Holland, L. D.↗

An energy-based study of the embedded element method for explicit dynamics

Abstract The embedded finite element technique provides a unique approach for modeling of fiber-reinforced composites. Meshing fibers as distinct bundles represented by truss elements embedded in a matrix material mesh allows for the assignment of more specific material properties for each component rather than homogenization of all of the properties. However, the implementations of the embedded element technique available in commercial software do not replace the material of the matrix elements with the material of the embedded elements. This causes a redundancy in the volume calculation of the overlapping meshes leading to artificially increased stiffness and mass. This paper investigates the consequences in the energy calculations of an explicit dynamic model due to this redundancy. A method for the correction of the edundancy within a finite element code is suggested which removes extra energy and is shown to be effective at correcting the energy calculations for large amounts of redundant volume.

Martin, Valerie A.↗

A Reduction Procedure for One-Dimensional Joint Models and Application to a Lap Joint

A reduction procedure for joint models that was developed in earlier work is extended to allow for relative motion between surfaces, and the effect of this procedure on timestep issues is considered. A general one-dimensional structure containing a frictional interface is considered. Coulomb friction is approximated with nonlinear springs of large but finite stiffness. The system of equations describing this structure is reduced in a procedure similar to Guyan reduction by assuming that the system deforms only in the shapes that it takes when the interface is massless. The result of this procedure is that the dynamics associated with the interface region are removed from the analysis. Following the development of the reduction procedure, the reduced formulation is specialized to the case of a simple lap joint. A numerical example problem is considered in which both the full and reduced equations of motion are integrated over time. It is seen that, for the example problem considered, the reduction procedure results in tremendous computational savings with little loss of accuracy. Based on the results of the simple example problem, it appears that the proposed reduction procedure has potential to be an accurate and effective method of alleviating the timestep difficulties associated with direct finite element analysis of joints in structural dynamics applications.

42 ENGINEERING↗

Atomistic modeling of bending properties of oxidized silicon nanowires

In this work, we have modeled a three point bending test of monocrystalline Si nanowires using molecular dynamics simulations in order to investigate their elastic properties. Tested nanowires were about 30 nm in length and had diameters from 5 to 9 nm. To study the influence of a native oxide layer, nanowires were covered with a 1 nm thick silica layer. The bending force was applied by a carbon diamond half-sphere with a 5 nm diameter. The Si-O parametrization for the Tersoff potential was used to describe atomic interactions between Si and O atoms. In order to remove the indentation effect of the diamond half-sphere and to obtain a pure bending behavior, we have also performed a set of simulations with fixed bottoms of the nanowires. Our results show that the oxide layer reduces the nanowire stiffness when compared with a pure Si nanowire with the same number of silicon atoms—in spite of the fact that the oxidized nanowires had larger diameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Asynchronous τ-leaping

Stochastic simulation of cell signaling pathways and genetic regulatory networks has contributed to the understanding of cell function; however, investigation of larger, more complicated systems requires computationally efficient algorithms. τ-leaping methods, which improve efficiency when some molecules have high copy numbers, either use a fixed leap size, which does not adapt to changing state, or recalculate leap size at a heavy computational cost. We present a hybrid simulation method for reaction-diffusion systems which combines exact stochastic simulation and τ-leaping in a dynamic way. Putative times of events are stored in a priority queue, which reduces the cost of each step of the simulation. For every reaction and diffusion channel at each step of the simulation the more efficient of an exact stochastic event or a τ-leap is chosen. This new approach removes the inherent trade-off between speed and accuracy in stiff systems which was present in all τ-leaping methods by allowing each reaction channel to proceed at its own pace. Both directions of reversible reactions and diffusion are combined in a single event, allowing bigger leaps to be taken. This improves efficiency for systems near equilibrium where forward and backward events are approximately equally frequent. Comparison with existing algorithms and behaviour for five test cases of varying complexity shows that the new method is almost as accurate as exact stochastic simulation, scales well for large systems, and for various problems can be significantly faster than τ-leaping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Track-train dynamic analysis and test program. Barber S-2 static test

The results of a static test of a Barber S-2 freight truck conducted to measure the stiffness and friction parameters of the modes of deformation which are being used in various mathematical models in the railroad industry were presented. Some difficulty was first experienced with the truck hardware since it was in an essentially new condition with many high spots causing interference. No difficulty was experienced once the interference was removed. The characteristics of the Barber S-2 are very similar to the ASF ride control truck. The major difference between the two trucks is the amount of friction between the bolster and side frames in both the vertical and lateral directions. The Barber S-2 has approximately twice the friction the ASF ride control truck has in the fully loaded condition. This does not necessarily imply that all trucks will have this same ratio of friction.

Abbott, P. W.↗

Understanding of the Dynamics of the Stirling Convertor Advanced by Structural Testing

The NASA Glenn Research Center, the U.S. Department of Energy, and the Stirling Technology Company (STC) are developing a highly efficient, long-life, free-piston Stirling convertor for use as an advanced spacecraft power system for future NASA missions, including deep-space and Mars surface applications. As part of this development, four structural dynamic test programs were recently performed on Stirling Technology Demonstration Convertors (TDC's) that were designed and built by STC under contract to the Department of Energy. This testing was performed in Glenn's Structural Dynamics Laboratory and Microgravity Emissions Laboratory. The first test program, in November and December 1999, demonstrated that the Stirling TDC could withstand the harsh random vibration experienced during a typical spacecraft launch and survive with no structural damage or functional power performance degradation. This was a critical step in enabling the use of Stirling convertors for future spacecraft power systems. The most severe test was a 12.3grms random vibration test, with test durations of 3 min per axis. The random vibration test levels were chosen to simulate, with margin, the maximum anticipated launch vibration conditions. The Microgravity Emissions Laboratory is typically used to measure the dynamics produced by operating space experiments and the resulting impact to the International Space Station's microgravity environment. For the second Stirling dynamic test program, performed in January 2001, the Microgravity Emissions Laboratory was used to characterize the structure-borne disturbances produced by the normal operation of a pair of Stirling convertors. The forces and moments produced by the normal operation of a Stirling system must be recognized and controlled, if necessary, so that other nearby spacecraft components, such as cameras, are not adversely affected. The Stirling convertor pair emitted relatively benign tonal forces at its operational frequency and associated harmonics. Therefore, Stirling power systems will not disturb spacecraft science experiments if minimal appropriate mounting efforts are made. The third test program, performed in February and May 2001, resulted in a modal characterization of a Stirling convertor. Since the deflection of the TDC piston rod, under vibration excitation, was of particular interest, the outer pressure shell was removed to allow access to the rod. Through this testing, the Stirling TDC's natural frequencies and modes were identified. This knowledge advanced our understanding of the successful 1999 vibration test and may be utilized to optimize the output power of future Stirling designs. The fourth test program, in April 2001, was conducted to characterize the structural response of a pair of Stirling convertors, as a function of their mounting interface stiffness. The test results provide guidance for the Stirling power package interface design. Properly designed, the interface may lead to increased structural capability and power performance beyond what was demonstrated in the successful 1999 vibration test. Dynamic testing performed to date at Glenn has shown that the Stirling convertors can withstand liftoff random vibration environments and meet "good neighbor" vibratory emission requirements. Furthermore, the future utilization of the information obtained during the tests will allow the corporation selected to be the Stirling system integrator to optimize their convertor and system interfaces designs. Glenn's Thermo-Mechanical Systems Branch provides Stirling technology expertise under a Space Act Agreement with the Department of Energy. Additional vibration testing by Glenn's Structural Systems Dynamics Branch is planned to continue to demonstrate the Stirling power system's vibration capability as its technology and flight system designs progress.

Hughes, William O.↗

Algebraic Stabilization of Explicit Numerical Integration for Extremely Stiff Reaction Networks

In contrast to the prevailing view in the literature, it is shown that even extremely stiff sets of ordinary differential equations may be solved efficiently by explicit methods if limiting algebraic solutions are used to stabilize the numerical integration. The stabilizing algebra differs essentially for systems well removed from equilibrium and those near equilibrium. Explicit asymptotic and quasi-steady-state methods that are appropriate when the system is only weakly equilibrated are examined first. These methods are then extended to the case of close approach to equilibrium through a new implementation of partial equilibrium approximations. Using stringent tests with astrophysical thermonuclear networks, evidence is provided that these methods can deal with the stiffest networks, even in the approach to equilibrium, with accuracy and integration timestepping comparable to that of implicit methods. Because explicit methods can execute a timestep faster and scale more favorably with network size than implicit algorithms, our results suggest that algebraically stabilized explicit methods might enable integration of larger reaction networks coupled to fluid dynamics than has been feasible previously for a variety of disciplines.

differential equations↗

A machining digital twin for hybrid manufacturing

Hybrid manufacturing consisting of metal additively manufactured preforms and computer numerical control (CNC) machining has been established to be an effective method for high material use rates. However, hybrid manufacturing introduces unique challenges. Near-net shape designs are typically selected, which result in a smaller margin for part placement within the stock and stringent requirements for work coordinate system identification. Additionally, less stock material reduces the preform stiffness, which limits the material removal rates during machining. This paper demonstrates a digital twin for CNC machining of a wire arc additively manufactured preform that implements: 1) structured light scanning for stock model identification and tool path generation; 2) a fused filament fabrication apparatus to attach temporary fiducials and scan targets to the preform that enable coordinate system definition for both the CAM and CNC machine; 3) preform and tool tip frequency response function measurements to enable stable milling parameter selection; and 4) post-manufacturing measurements of geometry, surface finish, and structural dynamics to confirm designer intent. These efforts define key components of the machining digital twin for hybrid manufacturing.

36 MATERIALS SCIENCE↗

Measuring the elastic wave velocity in the lens of the eye as a function of intraocular pressure using optical coherent elastography

The dependence of the elastic properties of the eye lens on the intraocular pressure is investigated in porcine eyes ex vivo. To measure the stiffness of the lens, the method of dynamic optical coherent elastography is used, in which the propagation velocity of surface elastic waves in the lens is measured using phase-sensitive optical coherent tomography. Measurement data show an increase in Young’s modulus of the lens by ∼30% with an increase in intraocular pressure from 10 to 40 mm Hg. This result allows us to conclude that the effect of intraocular pressure on the rigidity of the lens is less significant than on the rigidity of other eye tissues, such as the cornea and sclera. The method of optical coherent elastography makes it possible to measure the elastic properties of the lens without removing it from the eyeball and has considerable potential for clinical use. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hybrid Active-Passive Systems for Control of Aircraft Interior Noise

Previous work has demonstrated the large potential for hybrid active-passive systems for attenuating interior noise in aircraft fuselages. The main advantage of an active-passive system is, by utilizing the natural dynamics of the actuator system, the control actuator power and weight is markedly reduced and stability/robustness is enhanced. Three different active-passive approaches were studied in the past year. The first technique utilizes multiple tunable vibration absorbers (ATVA) for reducing narrow band sound radiated from panels and transmitted through fuselage structures. The focus is on reducing interior noise due to propeller or turbo fan harmonic excitation. Two types of tunable vibration absorbers were investigated; a solid state system based upon a piezoelectric mechanical exciter and an electromechanical system based upon a Motran shaker. Both of these systems utilize a mass-spring dynamic effect to maximize tile output force near resonance of the shaker system and so can also be used as vibration absorbers. The dynamic properties of the absorbers (i.e. resonance frequency) were modified using a feedback signal from an accelerometer mounted on the active mass, passed through a compensator and fed into the drive component of the shaker system (piezoelectric element or voice coil respectively). The feedback loop consisted of a two coefficient FIR filter, implemented on a DSP, where the input is acceleration of tile ATVA mass and the output is a force acting in parallel with the stiffness of the absorber. By separating the feedback signal into real and imaginary components, the effective natural frequency and damping of the ATVA can be altered independently. This approach gave control of the resonance frequencies while also allowing the simultaneous removal of damping from the ATVA, thus increasing the ease of controllability and effectiveness. In order to obtain a "tuned" vibration absorber the chosen resonant frequency was set to the excitation frequency. In order to minimize sound radiation a gradient descent algorithm was developed which globally adapted the resonance frequencies of multiple ATVA's while minimizing a cost based upon the radiated sound power or sound energy obtained from an array of microphones.

Fuller, Chris R.↗

Cytoskeleton Remodeling Induces Membrane Stiffness and Stability Changes of Maturing Reticulocytes

Reticulocytes, the precursors of erythrocytes, undergo drastic alterations in cell size, shape, and deformability during maturation. Experimental evidence suggests that young reticulocytes are stiffer and less stable than their mature counterparts; however, the underlying mechanism is yet to be fully understood. Here, we develop a coarse-grained molecular-dynamics reticulocyte membrane model to elucidate how the membrane structure of reticulocytes contributes to their particular biomechanical properties and pathogenesis in blood diseases. First, we show that the extended cytoskeleton in the reticulocyte membrane is responsible for its increased shear modulus. Subsequently, we quantify the effect of weakened cytoskeleton on the stiffness and stability of reticulocytes, via which we demonstrate that the extended cytoskeleton along with reduced cytoskeleton connectivity leads to the seeming paradox that reticulocytes are stiffer and less stable than the mature erythrocytes. Our simulation results also suggest that membrane budding and the consequent vesiculation of reticulocytes can occur independently of the endocytosis-exocytosis pathway, and thus, it may serve as an additional means of removing unwanted membrane proteins from reticulocytes. Finally, we find that membrane budding is exacerbated when the cohesion between the lipid bilayer and the cytoskeleton is compromised, which is in accord with the clinical observations that erythrocytes start shedding membrane surface at the reticulocyte stage in hereditary spherocytosis. Taken together, our results quantify the stiffness and stability change of reticulocytes during their maturation and provide, to our knowledge, new insights into the pathogenesis of hereditary spherocytosis and malaria.

Biophysics↗

Dynamic blade loading in the ERDA/NASA 100 kW and 200 kW wind turbines

Dynamic blade loads, including aerodynamic, gravitational, and inertial effects, are presented for two large horizontal-axis wind turbines: the ERDA-NASA 100 kW Mod-0 and 200 kw Mod-0A wind power systems. Calculated and measured loads are compared for an experimental Mod-0 machine in operation. Predicted blade loads are also given for the higher power Mod-0A wind turbine now being assembled for operation as part of a municipal power plant. Two major structural modifications have been made to the Mod-0 wind turbine for the purpose of reducing blade loads. A stairway within the truss tower was removed to reduce the impulsive aerodynamic loading caused by the tower wake on the downwind rotor blades. Also, the torsional stiffness of the yaw drive mechanism connecting the turbine nacelle to the tower was doubled to reduce rotor-tower interaction loads. Measured reductions in load obtained by means of these two modifications equaled or exceeded predictions.

Spera, D. A.↗