Search NASA⌕ Search

SEARCH · Search NASA

Results for “EFFECTIVE CHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Observations of differential charging effects on ATS 6

Differential charging effects observed in the electron data of the University of California, San Diego, auroral particles experiment on Applied Technology Satellite 6 are described and analyzed. An electrostatic barrier around the environmental measurements experiment (EME) package on ATS 6 is shown to be the natural result of dielectrics around the spacecraft which are more negatively charged than the mainframe of the spacecraft. In particular, the large dish antenna on ATS 6 causes the formation of a barrier which traps particles emitted from the EME package surface and returns them to the spacecraft. The insulating surface of the rotating University of Minnesota detector on the otherwise conducting EME package is shown to be the source of accelerated fluxes of electrons during charging events.

Olsen, R. C.↗
NASA NTRS1996

NASA's Technical Handbook for Avoiding On-Orbit ESD Anomalies Due to Internal Charging Effects

This paper describes NASA-HDBK-4002, "Avoiding Problems Caused by Spacecraft On-Orbit Internal Charging Effects". The handbook includes a description of internal charging and why it is of concern to spacecraft designers. It also suggests how to determine when a project needs to consider internal spacecraft charging, it contains an electron penetration depth chart, rationale for a critical electron flux criterion, a worst-case geosynchronous electron plasma spectrum, general design guidelines, quantitative design guidelines, and a typical materials characteristics list. Appendices include a listing of some environment codes, electron transport codes, a discussion of geostationary electron plasma environments, a brief description of electron beam and other materials tests, and transient susceptibility tests. The handbook will be in the web page, hftp://standards.nasa.gov. A prior document, NASA TP2361 "Design Guidelines for Assessing and controlling Spacecraft Charging Effects", 1984, is in use to describe mitigation techniques for the effects of surface charging of satellites in space plasma environments. HDBK-4002 is meant to complement 2361 and together, the pair of documents describe both cause and mitigation designs for problems caused by energetic space plasmas.

Whittlesey, Albert↗
NASA NTRS1990

Vehicle charging effects during electron beam emission from the CHARGE-2 experiment

The CHARGE-2 sounding rocket payload has measured the transient and steady-state charging of a spacecraft in LEO during the emission of a low-power electron beam. The electron beam successfully escaped the emitting spacecraft above 240 km, rather than being degraded by the spacecraft's potentials. These potentials were limited to about half of the 1-kV beam accelerating potential at all latitudes, suggesting that the electron beam was able to escape at altitudes down to 160 km. Electrons created from beam-plasma interactions become increasingly important in the return current below 240 km, and increased with decreasing altitude.

Myers, Neil B.↗
NASA NTRS1976

Development of environmental charging effect monitors for operational satellites

An instrumentation package to monitor the effects of the environmental charging of spacecraft surfaces on the systems of operational spacecraft was developed. This package performs two functions: first, the local charged particle flux and the particle characteristic energy is monitored; and second, transients in the spacecraft electrical harness is counted as a function of amplitude, with time. It is used to determine the duration and effect of any environmental charging of the spacecraft surfaces. Thus, it will be possible to determine the relationship between the occurrence of any anomalies and the charging phenomenon. Design details and design goals of this package are presented.

Stevens, N. J.↗
NASA NTRS1984

Design guidelines for assessing and controlling spacecraft charging effects

The need for uniform criteria, or guidelines, to be used in all phases of spacecraft design is discussed. Guidelines were developed for the control of absolute and differential charging of spacecraft surfaces by the lower energy space charged particle environment. Interior charging due to higher energy particles is not considered. A guide to good design practices for assessing and controlling charging effects is presented. Uniform design practices for all space vehicles are outlined.

Purvis, C. K.↗
NASA NTRS1985

Design guidelines for assessing and controlling spacecraft charging effects

The need for uniform criteria, or guidelines, to be used in all phases of spacecraft design is discussed. Guidelines were developed for the control of absolute and differential charging of spacecraft surfaces by the lower energy space charged particle environment. Interior charging due to higher energy particles is not considered. A guide to good design practices for assessing and controlling charging effects is presented. Uniform design practices for all space vehicles are outlined.

Purvis, C. K.↗
NASA NTRS1987

Three-dimensional charging effects

The physics of three dimensional spacecraft charging is reviewed. The asymmetric plasma sheath created around a spacecraft can significantly alter the trajectories of incoming particles or repel secondary particles emitted from the surface back to the surface. Thus seemingly anomolous potential variations can be encountered. Depending on the sensitivities of the spacecraft and its instruments to such variations, charging can jeopardize mission performance or even mission life through enhanced arcing. Three dimensional interactions between the Space Station and the ambient plasma and magnetic field are increasingly important.

Garrett, Henry Berry↗
NASA NTRS1985

Charging effects in the cometary environment of Halley

Electrostatic charging of the Giotto spacecraft in different impact induced charged particle environments was studied with 3D numerical particle-in-cell models. The simulation results are assessed according to first experimental results of Giotto and Vega instruments. Decreasing and even negative spacecraft potentials measured on Vega near closest approach to the comet suggest the influence of the cometary plasma, which is also confirmed by corresponding numerical simulations.

Thiemann, H.↗
NASA NTRS1975

Evaluation of electrostatic charge effects on the data processing system and the orbiter communication and tracking receivers

An analysis of radiated interference test results obtained from frictionally charged Orbiter TPS tile was presented. The tests included the measurement of noise pick-up by Orbiter S-band, L-band, C-band, and Ku-band antennas located beneath the tiles in a manner simulating their installation on Orbiter. In addition, the radiated field characteristics resulting from the static discharge was determined. The results are analyzed as to their effect on data bus equipment and on Orbiter Communications and Tracking (C&T) receivers. It was concluded that the radiated interference should have no effect on MDM's. However the CPU, IOP and PMU enclosures require some minor modification to assure immunity from P-static interference. Orbiter antenna tests indicate that the S-band receiver should not be affected by P-static noise. The TACAN and Radar Altimeter performance appears to be adequate but with a small margin. MSBLS performance is uncertain because laboratory instrumentation cannot approach the MSBLS sensitivity.

Lawton, R. M.↗
NASA NTRS1987

Space charge effects during the injection of dense electron beams into space plasmas

One-dimensional electrostatic particle simulations are used to investigate the injection and propagation of intense electron beams and the plasma response to the beam injection. Beam densities greater than about the plasma density are considered. It is shown that if the injection is continuous, most of the beam electrons are drawn back into the spacecraft because of the buildup of positive charge on the spacecraft. Those electrons which are able to propagate away from the spacecraft are emitted periodically because of space charge oscillations induced by electric fields associated with the beam. A substantial increase in the fraction and average energy of electrons which can propagate away can be obtained if the injection is changed to periodic pulses having width and period matched to the induced space charge oscillations.

Winglee, R. M.↗
NASA NTRS1992

Increased response of the reversal electron attachment detector and modeling of ion space-charge effects

Design and sensitivity tests of a modified version of the so-called reversal electron attachment detector (READ) are presented. The new version uses a spherical cathode capable of emitting higher electron currents. As in the original READ (which used a planar emitter) electrons are focused into an electrostatic mirror which reverses their trajectories. In the reversal region electrons have essentially zero energy and attach to target molecules to form negative ions. The electron gun lens system has been modified using a field and trajectory code with space charge included. Electron trajectories have been calculated for 1-mA current focused into a reversal region of 3.5-mm diameter. The detection limit of the apparatus is approximately 25 times lower than for the original READ. Nonlinearity in the measured signal vs electron current is described by a model in which a spherical ball of ions expands outward with velocity determined by the space-charge force and the initial velocity of ion formation.

Boumsellek, S.↗
NASA NTRS1997

Spacecraft power system architecture to mitigate spacecraft charging effects

A power system architecture for a spacecraft and a method of a power supply for a spacecraft are presented which take advantage of the reduced plasma interaction associated with positive ground high voltage photovoltaic arrays and provide a negative ground power supply for electrical loads of the spacecraft. They efficiently convert and regulate power to the load bus and reduce power system mass and complexity. The system and method ground the positive terminal of the solar arrays to the spacecraft hull, and using a power converter to invert the electric sign, permit a negative ground for the electrical distribution bus and electrical components. A number of variations including a load management system and a battery management system having charging and recharging devices are presented.

Manner, David B.↗