Search NASA⌕ Search

SEARCH · Search NASA

Results for “EFFECTIVE MASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Evidence of Polaron Formation in Halide Perovskites via Carrier Effective Mass Measurements

Carrier effective mass is a central parameter in solid-state physics. It is a measure of the strength of the coupling between a carrier and excitations arising from its surrounding medium, and features prominently in transport and optical calculations. Experimental techniques employed to determine it are steady-state ones, and so are unable to detect any change in the effective mass after a strong perturbation to the system, e.g., strong optical excitation. By combining time-resolved terahertz spectroscopy and transient absorption spectroscopy, on a mixed-cation mixed-halide perovskite thin film, we observe a large and long-lived photoinduced enhancement of the carrier effective mass, and from it deduce a twofold increase of the carrier-phonon coupling constant, giving evidence of polaron formation. Our work demonstrates a new approach to track the strength and ultrafast lifetimes of photoinduced carrier-boson interactions down to picosecond timescales that can be applied to a wide range of solid-state systems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effective Mass from Seebeck Coefficient

Abstract Engineering semiconductor devices requires an understanding of the effective mass of electrons and holes. Effective masses have historically been determined in metals at cryogenic temperatures estimated using measurements of the electronic specific heat. Instead, by combining measurements of the Seebeck and Hall effects, a density of states effective mass can be determined in doped semiconductors at room temperature and above. Here, a simple method to calculate the electron effective mass using the Seebeck coefficient and an estimate of the free electron or hole concentration, such as that determined from the Hall effect, is introduced here is the Seebeck effective mass, n H is the charge carrier concentration measured by the Hall effect ( n H = 1/ eR H , R H is Hall resistance) in 10 20 cm −3 , T is the absolute temperature in K, S is the Seebeck coefficient, and k B / e = 86.3 μV K −1 . This estimate of the effective mass can aid the understanding and engineering of the electronic structure as it is largely independent of scattering and the effects of microstructure (grain boundary resistance). It is particularly helpful in characterizing thermoelectric materials.

Snyder, Gerald Jeffrey↗
DOE OSTI2022

Effective mass of α-cluster in 12C nucleus

Based on the effective-mass concept, we perform the Faddeev calculations for a low-lying spectrum of 3[Formula: see text] states in [Formula: see text]C nucleus. A three-body potential is used to describe the known breaking of the 3[Formula: see text]-cluster structure in the nucleus. We show that the contribution of the three-body potential to the Hamiltonian can be compensated by increasing/decreasing the [Formula: see text]-particle free mass. The effective-mass values are adjusted to reproduce the experimental data for the [Formula: see text]C nucleus. The energy dependence of the effective mass and the correlation to a three-body potential are discussed. We show that the coupling between the [Formula: see text] ([Formula: see text]) levels forms a specific picture of anti-crossing on the energy/effective-mass plane.

Physics↗
DOE OSTI2022

Improving Effective Mass Estimations in Pu-Metal Annuli

Determining the effective mass of 240 Pu in a plutonium metal item can be achieved through a number of destructive and non-destructive assay techniques. However, these techniques have one or more shortcomings. These include the need for large quantities of plutonium, long measurement time, or lack of sufficient accuracy. While efforts have been made to mitigate these issues by estimating 240 Pu quantities through neutron coincidence counting techniques, these estimates are subject to systematic bias, and their estimates are not well characterized when other factors of the annulus’ physical form and composition are accounted for. In this work, we expand upon these non-destructive assay techniques via the implementation of random forest machine learning models, which produce correction functions that augment and improve the effective mass estimates derived from classical leakage multiplication, singles, doubles, and triples multiplicity counting equations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Constraining nucleon effective masses with flow and stopping observables from the S π RIT experiment

Properties of the nuclear equation of state (EoS) can be probed by measuring the dynamical properties of nucleus-nucleus collisions. In this study, we present the directed flow (υ 1 ), elliptic flow (υ 2 ) and stopping (VarXZ) measured in fixed target Sn + Sn collisions at 270 AMeV with the SπRIT Time Projection Chamber. We perform Bayesian analyses in which EoS parameters are varied simultaneously within the Improved Quantum Molecular Dynamics-Skyrme (ImQMD-Sky) transport code to obtain a multivariate correlated constraint. The varied parameters include symmetry energy, S 0 , and slope of the symmetry energy, L, at saturation density, isoscalar effective mass, $m^{⁎}_{S}$/$m_{N}$ , isovector effective mass, $m^{⁎}_{υ}$/$m_{N}$ and the in-medium cross-section enhancement factor η. We find that the flow and VarXZ observables are sensitive to the splitting of proton and neutron effective masses and the in-medium cross-section. Comparisons of ImQMD-Sky predictions to the SπRIT data suggest a narrow range of preferred values for $m^{⁎}_{S}$/$m_{N}$, $m^{⁎}_{υ}$/$m_{N}$ and η.

Astronomy & Astrophysics↗
DOE OSTI2024

Electronic structure and effective mass of pristine and Cl-doped CsPbBr 3

Organic–inorganic lead halide perovskites (LHPs) have attracted great interest owing to their outstanding optoelectronic properties. Typically, the underlying electronic structure would determinate the physical properties of materials. But as for now, limited studies have been done to reveal the underlying electronic structure of this material system, comparing to the huge amount of investigations on the material synthesis. The effective mass of the valance band is one of the most important physical parameters which plays a dominant role in charge transport and photovoltaic phenomena. In pristine CsPbBr 3 , the Fröhlich polarons associated with the Pb–Br stretching modes are proposed to be responsible for the effective mass renormalization. In this regard, it would be very interesting to explore the electronic structure in doped LHPs. Here, we report high-resolution angle-resolved photoemission spectroscopy (ARPES) studies on both pristine and Cl-doped CsPbBr 3 . The experimental band dispersions are extracted from ARPES spectra along both $\overline{\Gamma}$–$\overline{M}$–$\overline{\Gamma}$ and $\overline{X}$–$\overline{M}$–$\overline{X}$ high symmetry directions. DFT calculations are performed and directly compared with the ARPES data. Our results have revealed the band structure of Cl-doped CsPbBr 3 for the first time, which have also unveiled the effective mass renormalization in the Cl-doped CsPbBr 3 compound. Doping dependent measurements indicate that the chlorine doping could moderately tune the renormalization strength. These results will help understand the physical properties of LHPs as a function of doping.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Static Self-Energy and Effective Mass of the Homogeneous Electron Gas from Quantum Monte Carlo Calculations

We discuss the methodology of quantum Monte Carlo calculations of the effective mass based on the static self-energy Σ(k,0). We then use variational Monte Carlo calculations of Σ(k,0) of the homogeneous electron gas at various densities to obtain results very close to perturbative G 0 W 0 calculations for values of the density parameter 1 ≤ r s ≤ 10. Here, the obtained values for the effective mass are close to diagrammatic Monte Carlo results and disagree with previous quantum Monte Carlo calculations based on a heuristic mapping of excitation energies to those of an ideal gas.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Role of effective mass and long-range interactions in the band-gap renormalization of photoexcited semiconductors

Understanding how to control changes in the electronic structure and related dynamical renormalizations by external driving fields is the key for understanding ultrafast spectroscopy and applications in electronics. Here, we focus on the band gap's modulation by external electric fields and uncover the effect of band dispersion on the gap renormalization. We employ the Green's function formalism using the real-time Dyson expansion to account for dynamical correlations induced by photodoping. The many-body formalism captures the dynamics of systems with long-range interactions, carrier mobility, and variable electron and hole effective mass. We also demonstrate that mean-field simulations based on the Hartree-Fock Hamiltonian, which lacks dynamical correlations, yields a qualitatively incorrect picture of band-gap renormalization. We find the trend that increasing effective mass, thus decreasing mobility, leads to as much as a 6% enhancement in band-gap renormalization. Further, the renormalization is strongly dependent on the degree of photodoping. As the screening induced by free electrons and holes effectively reduces any long-range and interband interactions for highly excited systems, we show that there is a specific turnover point with a minimal band gap. Here, we further demonstrate that the optical gap renormalization follows the same trend though its magnitude is altered by the Moss-Burstein effect.

Approximation methods for many-body systems↗
DOE OSTI2024

Bare mass effects on the reheating process after inflation

We consider the effects of a bare mass term for the inflaton, when the inflationary potential takes the form V(Φ)=λΦ k about its minimum with k ≥ 4. We concentrate on k =4, but discuss general cases as well. Further, we assume $λΦ$$^{2}_{end}$ >> $m$$^{2}_{Φ}$, where Φ end is the inflaton field value when the inflationary expansion ends. We show that the presence of a mass term (which may be present due to radiative corrections or supersymmetry breaking) can significantly alter the reheating process, as the equation of state of the inflaton condensate changes from w Φ = $\frac{1}{3}$ to w Φ = 0 when λ⁢Φ 2 drops below $m$$^{2}_{Φ}$. We show that, for a mass mΦ ≳ 3⁢λ $\frac{1}{4}$ T RH , the mass term will dominate at reheating. The value of λ is relatively model independent as it is normalized by the cosmic microwave background perturbation spectrum. For T models of inflation, this leads to m Φ ≳ T RH /250. We compute the effects on the reheating temperature for cases where reheating is due to inflaton decay (to fermions, scalars, or vectors) or to inflaton scattering (to scalars or vectors). For scattering to scalars and in the absence of a decay, there is always a residual inflaton background that acts as cold dark matter. In this case, we derive a strong upper limit to the inflaton bare mass which for T models is m Φ < 350 MeV⁢(T RH /10 10 GeV) 3/5 . We also consider the effect of the bare mass term on the fragmentation of the inflaton condensate.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Heavy quark mass effects in charged-current deep-inelastic scattering at approximate NNLO in the Aivazis-Collins-Olness-Tung scheme

The approximate SACOT-𝜒 scheme for heavy quark production in deep-inelastic scattering was initially formulated for the neutral current structure functions 𝐹 2 and 𝐹 𝐿 . We extend this approach to the charged current case (also including 𝐹 3 ), and thereby complete the definitions for the most relevant inclusive structure functions. Furthermore, we implement these structure functions in the open-source code APFEL++ which provides fast numerical evaluations over a wide kinematic range; this addition to the APFEL++ code is publicly available, with details provided in the Appendix. This SACOT-𝜒 implementation enables detailed numerical insights on the mass dependence of the structure functions and cross sections in the (𝑥,𝑄 2 )-plane for both neutral and charged current processes. We consider kinematic regions relevant for the experimental measurements from fixed-target 𝜈⁢ DIS experiments (NuTeV, CCFR, and Chorus) and HERA, and also projections for the upcoming EIC. In particular, the 𝜈⁢ DIS experiments reveal a surprisingly strong dependence on the mass effects, offering valuable insights that may help resolve long-standing challenges in accurately describing these datasets.

Risse, P. [Westfälische Wilhelms-Universität Münst↗
DOE OSTI2024

The beyond-halo mass effects of the cosmic web environment on galaxies

ABSTRACT Galaxy properties primarily depend on their host halo mass. Halo mass, in turn, depends on the cosmic web environment. We explore if the effect of the cosmic web on galaxy properties is entirely transitive via host halo mass, or if the cosmic web has an effect independent of mass. The secondary galaxy bias, sometimes referred to as ‘galaxy assembly bias’, is the beyond-mass component of the galaxy–halo connection. We investigate the link between the cosmic web environment and the secondary galaxy bias in simulations. We measure the secondary galaxy bias through the following summary statistics: projected two-point correlation function, $w_{\mathrm{p}}(r_{\mathrm{p}})$, and counts-in-cylinders statistics, $P(N_{\mathrm{CIC}})$. First, we examine the extent to which the secondary galaxy bias can be accounted for with a measure of the environment as a secondary halo property. We find that the total secondary galaxy bias preferentially places galaxies in more strongly clustered haloes. In particular, haloes at fixed mass tend to host more galaxies when they are more strongly associated with nodes or filaments. This tendency accounts for a significant portion, but not the entirety, of the total secondary galaxy bias effect. Secondly, we quantify how the secondary galaxy bias behaves differently depending on the host halo proximity to nodes and filaments. We find that the total secondary galaxy bias is relatively stronger in haloes more associated with nodes or filaments. We emphasize the importance of removing halo mass effects when considering the cosmic web environment as a factor in the galaxy–halo connection.

Astronomy & Astrophysics↗
DOE OSTI2022

Charm mass effects in the static energy computed in 2+1+1 flavor lattice QCD

We report our analysis for the static energy in (2+1+1)-flavor QCD over a wide range of lattice spacings and several quark masses. We obtain results for the static energy out to distances of nearly 1 fm, allowing us to perform a simultaneous determination of the lattice scales $r_2$, $r_1$ and $r_0$ as well as the string tension, $\sigma$. While our results for ${r_0}/{r_1}$ and $r_0$$\sqrt{\sigma}$ agree with published (2+1)-flavor results, our result for ${r_1}/{r_2}$ differs significantly from the value obtained in the (2+1)-flavor case, likely due to the effect of the charm quark. We study in detail the effect of the charm quark on the static energy by comparing our results on the finest lattices with the previously published (2+1)-flavor QCD results at similar lattice spacing. The lattice results agree well with the two-loop perturbative expression of the static energy incorporating finite charm mass effects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Isotopic mass effects of tritium-fueled high-performance TFTR supershots

An increase in total stored energy correlated with the addition of tritium fuel was observed in supershots during the TFTR DT campaign. This supershot regime had strikingly high, centrally peaked ion and electron temperatures, and the largest neutron emission rates observed in TFTR. This paper presents a study of the causes of this increase in stored energy in supershots. Twenty-six supershots have been recently reanalyzed with the TRANSP plasma analysis code. Early TRANSP simulations did not accurately match the measured magnitude and time evolutions of the neutron emission rates. This mismatch is attributed to neglecting apparent increases of trace amounts of heavy impurities during neutral beam injection. The new TRANSP runs were tuned to accommodate this and match the measured global neutron emission rates. These new runs also had improved fidelity in predicting the time histories and radial dependencies of measured DT neutron emission rates. That in turn adds confidence in the simulated thermal deuterium and tritium density profiles that are needed for calculating the average hydrogenic atomic mass profiles. Six subsets of these supershots had well matched toroidal field B tor , plasma current I p , flux geometry, and total injected neutral beam power. The mix of D and T beam ions was varied for different discharges. The magnitude of the increase of the thermal ion energy W i with added tritium was relatively small, and the total W tot increase is dominated by the increase in fast beam ions with T. Analyses at times before the occurrences of deleterious MHD instabilities yielded scaling of W tot with the volume-average isotopic mass consistent with previous publications. The relative fraction of fast energy ions is expected to be small in practical tokamak reactors. Thus the increase in stored energy W tot observed in TFTR supershots does not appear likely to be significantly helpful for producing useful fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Reduced Sediment Settling in Turbulent Flows Due To Basset History and Virtual Mass Effects

The behavior of suspended particles in turbulent flows is a recalcitrant problem spanning wide-ranging fields including geomorphology, hydrology, and dispersion of particulate matter in the atmosphere. One key mechanism underlying particle suspension is the difference between particle settling velocity (w s ) in turbulence and its still water counterpart (w so ). This difference is explored here for a range of particle-to-fluid densities (1 – 10) and particle diameter to Kolmogorov micro-eddy sizes (0.1 – 10). Conventional models of particle fluxes that equate w s to w so result in eddy diffusivities and turbulent Schmidt numbers contradictory to laboratory experiments. Incorporating virtual mass and Basset history forces resolves these inconsistencies, providing clarity as to why w s /w so is sub-unity for the aforementioned conditions. The proposed formulation can be imminently used to model particle settling in turbulence, especially when sediment distribution outcomes over extended time scales far surpassing turbulence time scales are sought.

Geology↗