Search NASA⌕ Search

SEARCH · Search NASA

Results for “EIGENFREQUENCY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Eigenfrequency constrained topology optimization of finite strain hyperelastic structures

This paper incorporates hyperelastic materials, nonlinear kinematics, and preloads in eigenfrequency constrained density–based topology optimization. The formulation allows for initial finite deformations and subsequent small harmonic oscillations. The optimization problem is solved by the method of moving asymptotes, and the gradients are calculated using the adjoint method. Both simple and degenerate eigenfrequencies are considered in the sensitivity analysis. A well-posed topology optimization problem is formulated by filtering the volume fraction field. Numerical issues associated with excessive distortion and spurious eigenmodes in void regions are reduced by removing low volume fraction elements. The optimization objective is to maximize stiffness subject to a lower bound on the fundamental eigenfrequency. Numerical examples show that the eigenfrequencies drastically change with the load magnitude, and that the optimization is able to produce designs with the desired fundamental eigenfrequency.

42 ENGINEERING↗
NASA NTRS1977

The sensitivity of nonradial p mode eigenfrequencies to solar envelope structure

Eigenfrequencies are calculated for nonradial p mode oscillations in the sun. These frequencies are shown to depend on the adiabat of the solar convective envelope. The frequency dependence is greatest for the p2 and p3 modes described by spherical harmonics with l = 500 to 1000. The solar envelope model includes a realistic representation of the chromosphere out to the base of the corona. For the chromospheric model of Vernazza, Avrett, and Loeser (1976) chromospheric modes with a distinct locus of eigenfrequencies exist near an eigenfrequency of 0.026 Hz. The actual frequencies of these eigenmodes depend on the thickness of the chromosphere. Because of the difference in the dependence of eigenfrequency on l for the chromospheric modes as compared with the p modes, the two types of mode can be distinguished observationally. If detected, the chromospheric modes would provide a good way of determining the thickness of the chromosphere.

Ulrich, R. K.↗
DOE OSTI2019

Eigenfrequency-Based Prediction of the Cutting Properties of Superhard Inserts

The relation between the cutting properties of superhard tool inserts and their eigenfrequency is studied. The relation between the life of inserts and their acoustic properties is confirmed experimentally in the turning of high-temperature nickel alloys and quenched steels. A method is developed for determining the eigenfrequency of cutting inserts, along with the corresponding equipment.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Determining the Mass Density Along Magnetic Field Lines from Toroida Eigenfrequencies

Toroidal eigenfrequencies can be used to remotely sense the equatorial mass density rho(sub eq) and the density dependence along a magnetic field line. Here we present improvements to the method of Schulz [1996], which allows rho(sub eq) and the power law index alpha (for mass density along a field line proportional to R(sup -alpha), where R is the radial distance from the center of the Earth) to be determined from the y intercept and slope of a plot of toroidal frequency versus toroidal harmonic number n. Our modifications include a model form for eigenfrequencies with a fractional precision of 0.0005 for -6 less than or = alpha less than or = 6 and 2 less than or = L less than or = 8 (accuracy is doubtful beyond L = 5) and an iterative procedure for getting more accurate results than those found using Schulz's method. In addition, we do an analysis of the effect of random measurement errors. Observed frequencies need to be accurate to approx. 6% (3%) of the fundamental frequency in order to determine rho(sub eq) (alpha) to a precision of 30% (unity). We then apply our method to data generated using the Global Core Plasma Model for plasmaspheric mass density; our analysis demonstrates clearly bow the alpha index represents the mass density dependence on the outer part of the field line (R/(LR(sub E)) greater than or approx. 2/3).

Denton, R.↗
DOE OSTI2019

Acoustic manipulation of fluids based on eigenfrequency

An acoustic resonator device includes a fluid chamber with a carrier surface and a reflector surface. The fluid chamber is filled with a volume of a fluid that includes a phase-separate material such as algae. The carrier surface is coupled to a transducer, which may be a lead zirconate titanate (PZT) transducer. The transducer, when supplied with electricity, emits an acoustic wave-based output of an output frequency (e.g., ultrasound). A sensor may be used to track one or more eigenfrequencies of the volume of fluid, the acoustic resonator device, or some combination thereof. A controller may receive tracking data from the sensor and control the voltage source, the transducer, or some combination thereof to ensure that the output frequency matches one of the tracked eigenfrequencies, thereby maximizing excitation of the fluid to improve efficiency of mixing, stimulation, and separation of materials from fluid (e.g., for algal biocrude production).

09 BIOMASS FUELS↗
DOE OSTI2018

Mill Eigenfrequency in Thermal Fitting

A method is proposed for the analytical calculation of the elastic displacement of a shaft relative to a bush in joints with interference under the action of radial force and a bending torque. Those displacements are associated with elastic deformation of the shaft, the bush, and the contact layer formed by their rough surfaces. On the basis of that approach, a method is proposed for estimating the lower eigenfrequency of the shaft–bush system. As an example, the thermal fitting of an axial tool in a mandrel is considered.

42 ENGINEERING↗
DOE OSTI2023

Gravitational Wave Eigenfrequencies from Neutrino-driven Core-collapse Supernovae

Abstract Core-collapse supernovae (CCSNe) are predicted to produce gravitational waves (GWs) that may be detectable by Advanced LIGO/Virgo. These GW signals carry information from the heart of these cataclysmic events, where matter reaches nuclear densities. Recent studies have shown that it may be possible to infer the properties of the proto-neutron star (PNS) via GWs generated by hydrodynamic perturbations of the PNS. However, we lack a comprehensive understanding of how these relationships may change with the properties of CCSNe. In this work, we build a self-consistent suite of over 1000 exploding CCSNe from a grid of progenitor masses and metallicities combined with six different nuclear equations of state (EOS). Performing a linear perturbation analysis on each model, we compute the resonant GW frequencies of the PNS, and we motivate a time-agnostic method for identifying characteristic frequencies of the dominant GW emission. From this, we identify two characteristic frequencies, of the early- and late-time signal, that measure the surface gravity of the cold remnant neutron star, and simultaneously constrain the hot nuclear EOS. However, we find that the details of the CCSN model, such as the treatment of gravity or the neutrino transport, and whether it explodes, noticeably change the magnitude and evolution of the PNS eigenfrequencies.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1979

The effect of a radial rotational velocity gradient on p-mode eigenfrequencies

The splitting of p-mode eigenfrequencies due to a depth-dependent solar rotation rate is considered. It is shown that to a first approximation this splitting can be treated as resulting from the translation of the wave pattern across the field of view with a velocity equal the actual velocity at a depth called the effective depth. The effective depths for a model solar envelope with l/H = 3 are presented as a function of position on the (kh, omega)-plane. The combination of omega near 0.025/s and kh near 0 yields the deepest probe of the solar envelope. For this same combination of kh and omega it is possible to resolve individual groups of eigenmodes in frequency but not in spatial wavenumber. Achievement of this resolution observationally may permit a determination of the lifetime of these particular modes.

Ulrich, R. K.↗
NASA NTRS1981

Effect of elastic end rings on the eigenfrequencies of thin cylinders

The effect of elastic end rings on the eigenfrequencies of thin cylindrical shells is studied by using an exact solution of the linear eigenvalue problem. The out-of-plane and torsional rigidities of the rings are responsible for the overall shell stiffness. Considerable mode interaction exists for modes with low circumferential wave numbers when the mass of the ring is comparable with that of the shell. The hypothetical simply supported and clamped boundary conditions are practically impossible to realize with a finite-mass ring for relatively short and thin shells.

El Raheb, M.↗
NASA NTRS1984

The Sensitivity of Solar Eigenfrequencies to the Treatment of the Equation of State

The principal uncertainties in the equation of state involve the treatment of pressure ionization, the Debye-Huckel coulomb corrections, and the treatment of many-particle interaction effects. It is found that, for the lowest degree modes (l between 0 and 3), the terms and procedures used in the equation of state which deal with these uncertainties introduce changes in the frequencies which are less than 4 micro Hz. Recently, Shibahashi, Noels and Gabriel (1983) published solar eigenfrequencies using a theory with an equation of state improved with respect to the theory used earlier by Shibahashi and Osaki (1981). Their comparison between the two sets of results suggested that uncertainties in the frequencies as large as 10 micro Hz could be caused by the equation of state. It is felt that since the entire effect of the uncertain terms is only 4 micro Hz and since the uncertainties are only a fraction of each term, the 10 micro Hz changes found by Shibahashi et al must be a consequence of differences between the earlier and later calculations in areas other than the equation of state.

Ulrich, R. K.↗
NASA NTRS1995

The role of photospheric magnetic fields in the variation of solar oscillation eigenfrequencies

The frequencies of solar oscillations have been found to be higher at the peak of the solar cycle, their variation being consistent with that expected from a change in the solar structure confined to the Sun's outer layers. In this work, a technique is introduced for estimating the effect of the highly inhomogeneous photospheric magnetic field on solar oscillation eigenfrequencies, and its results are compared with the solar data. It is found that the observed steep rise in frequency shift at low frequency and the leveling of or decline at high frequency are well reproduced by the model. The correct order of magnitude for the frequency changes is also reproduced, at least at low frequency. The model implies a particular functional form for the variation of the frequency changes with order and degree, and it is suggested that future advances in observation and theory will therefore allow this model to be confirmed or refuted.

Rosenthal, C. S.↗
NASA NTRS2009

A Technique for Adjusting Eigenfrequencies of WGM Resonators

A simple technique has been devised for making small, permanent changes in the eigenfrequencies (resonance frequencies) of whispering-gallery-mode (WGM) dielectric optical resonators that have high values of the resonance quality factor (Q). The essence of the technique is to coat the resonator with a thin layer of a transparent polymer having an index of refraction close to that of the resonator material. Successive small frequency adjustments can be made by applying successive coats. The technique was demonstrated on a calcium fluoride resonator to which successive coats of a polymer were applied by use of a hand-made wooden brush. To prevent temperature- related frequency shifts that could interfere with the verification of the effectiveness of this technique, the temperature of the resonator was stabilized by means of a three-stage thermoelectric cooler. Measurements of the resonator spectrum showed the frequency shifts caused by the successive coating layers.

Strekalov, Dmitry↗
NASA NTRS1987

An analysis of electromagnetic coupling and eigenfrequencies for microwave electrothermal thruster discharges

This paper discusses the basic approach to developing a comprehensive electromagnetic model for a microwave electrothermal discharge. The discharge and surrounding region are modeled as a section of waveguide loaded with a uniform, cold, lossy plasma. A characteristic equation has been derived describing all possible system modes. In particular the TM(01) mode is numerically solved. Propagation and attenuation constants for the TM(01) mode are found numerically for a given range of electron-neutral collision frequencies and plasma densities. Results are used to interpret a number of experimental observations in helium. Specifically, they are used to explain high coupling efficiencies and ease of cavity tuning at high pressures.

Frasch, L. L.↗
NASA NTRS1990

Eigenfrequencies and horizontal structure of divergent barotropic instability originating in tropical latitudes

A systematic investigation of eigenfunctions of the generalized Laplace tidal equation, for the case of tropical-latitude monotonic mean zonal wind profiles with a single narrow reversed vorticity gradient region, has revealed that, in the limit of low planetary zonal wavenumber, the barotropic instability modes bifurcate into weakly divergent modes of hemispheric scale, on the one hand, and on the other strongly divergent 'internal' modes trapped about the source region. These latter disturbances penetrate into the deep tropics as a Kelvin wave-type phenomenon not previously seen in this context. These results suggest that hemispheric barotropic instability need not be purely nondivergent, and that the growth of weakly divergent modes is preferred.

Dunkerton, Timothy J.↗
NASA NTRS1995

Uncertainties for two-dimensional models of solar rotation from helioseismic eigenfrequency splitting

Observed solar p-mode frequency splittings can be used to estimate angular velocity as a function of position in the solar interior. Formal uncertainties of such estimates depend on the method of estimation (e.g., least-squares), the distribution of errors in the observations, and the parameterization imposed on the angular velocity. We obtain lower bounds on the uncertainties that do not depend on the method of estimation; the bounds depend on an assumed parameterization, but the fact that they are lower bounds for the 'true' uncertainty does not. Ninety-five percent confidence intervals for estimates of the angular velocity from 1986 Big Bear Solar Observatory (BBSO) data, based on a 3659 element tensor-product cubic-spline parameterization, are everywhere wider than 120 nHz, and exceed 60,000 nHz near the core. When compared with estimates of the solar rotation, these bounds reveal that useful inferences based on pointwise estimates of the angular velocity using 1986 BBSO splitting data are not feasible over most of the Sun's volume. The discouraging size of the uncertainties is due principally to the fact that helioseismic measurements are insensitive to changes in the angular velocity at individual points, so estimates of point values based on splittings are extremely uncertain. Functionals that measure distributed 'smooth' properties are, in general, better constrained than estimates of the rotation at a point. For example, the uncertainties in estimated differences of average rotation between adjacent blocks of about 0.001 solar volumes across the base of the convective zone are much smaller, and one of several estimated differences we compute appears significant at the 95% level.

Genovese, Christopher R.↗