The Capture, Containment, and Return System’s (CCRS) Earth Entry System (EES) Protection and Release Phase, the Last Step in Bringing Back Samples from Mars
Explore the source record for details and available documents.
Bruno Sarli↗
SEARCH · Search NASA
Results for “Earth Entry System”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Status of the Development of 3MDCP, the 3-D Woven TPS enabling the Mars Sample Return Earth Entry System
- The Mars Sample Return Earth Entry System is being designed to withstand entry environments of: - Peak Heat Flux of > 3000 W/cm2 - Peak Dynamic Pressure of > 2 atmospheres - Peak Shear of > 3000 Pa. - The TPS Material System Selected to support MSR EES is “3MDCP”, 3D Mid Density Carbon Phenolic. 3MDCP is a derivative of the HEEET material system, using the “Insulation Layer” only. - Implementation of 3MDCP on EES is monolithic instead of a tile architecture in order to meet MSR reliability demands. - The EES TPS Team has recently completed a number of major engineering development milestones in support of delivering the flight 3MDCP TPS hardware: - Weaving Scale-Up completed, > 80” width woven preform production underway - Full Scale Forming & Manufacturing Attrition completed to verify delivered thickness capabilities. - Recent Design Change: EES design has been changed from a 45 degree sphere cone to a 52.5 degree sphere cone to allow for additional system mass.
Z. Young↗
Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness
The Mars Sample Return Earth Entry System is a mission concept which would be the first NASA entry vehicle to utilize a woven thermal protection system as well as a 52.5 degree sphere-cone forebody geometry. Due to its novel design, historic experimental data sets were insufficient to validate the models used to characterize the expected aerothermal environment. A wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project in the NASA Langley 20-Inch Mach 6 Air Tunnel in order to obtain validation data. The December 2023 test entry of this campaign sought to obtain thermographic data to capture the impact of supersonic flow near woven surface roughness elements on convective heating augmentation, which was the largest remaining uncertainty in aerothermal design of the Earth Entry System. Data obtained were in family with prior results obtained on identical woven patterns without supersonic flow present at roughness elements, and it was found that this presence of supersonic flow did not have a noticeable effect on surface convective heating augmentation. Data were directly leveraged to support the NASA Mars Sample Return flight program and this data set is valuable for validating computational solutions on roughness-resolved grids.
Mars Sample Return↗
Aeroheating Testing of the Mars Sample Return Earth Entry System with Surface Roughness
The Mars Sample Return Earth Entry System is a mission concept which would be the first NASA entry vehicle to utilize a woven thermal protection system as well as a 52.5 degree sphere-cone forebody geometry. Due to its novel design, historic experimental data sets were insufficient to validate the models used to characterize the expected aerothermal environment. A wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project in the NASA Langley 20-Inch Mach 6 Air Tunnel in order to obtain validation data. The December 2023 test entry of this campaign sought to obtain thermographic data to capture the impact of supersonic flow near woven surface roughness elements on convective heating augmentation, which was the largest remaining uncertainty in aerothermal design of the Earth Entry System. Data obtained were in family with prior results obtained on identical woven patterns without supersonic flow present at roughness elements, and it was found that this presence of supersonic flow did not have a noticeable effect on surface convective heating augmentation. Data were directly leveraged to support the NASA Mars Sample Return flight program and this data set is valuable for validating computational solutions on roughness-resolved grids.
Mars Sample Return↗
Mars Sample Return Earth Entry System Woven Roughness Mach 6 Aeroheating Test
The Mars Sample Return Earth Entry System is the first entry vehicle designed for a NASA flagship mission to utilize a woven thermal protection system as well as a 52.5 degree sphere cone forebody geometry. As a result, no heritage aeroheating experimental data set exists to compare with computational predictions. In order to obtain a set of validation data for computational models, an extensive wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project. The first entry in the test campaign was completed in April of 2023, which was an investigation of turbulent heating augmentation due to woven thermal protection system roughness on the 52.5 degree Mars Sample Return - Earth Entry System vehicle forebody geometry. This test entry produced the first ever experimental aeroheating data on a 52.5 degree sphere-cone geometry as well as the first NASA experimental aeroheating data on a woven surface roughness pattern. Data obtained from this test campaign is being directly leveraged to support the NASA flight program, as experimental results are being utilized to validate the computational models which characterize the aeroheating environment that the vehicle experiences and predict turbulent surface heating levels and margins across the woven surface.
Jonathan S Cheatwood↗
Mars Sample Return Earth Entry System Woven Roughness Mach 6 Aeroheating Test
The Mars Sample Return Earth Entry System is the first entry vehicle designed for a NASA flagship mission to utilize a woven thermal protection system as well as a 52.5 degree sphere cone forebody geometry. As a result, no heritage aeroheating experimental data set exists to compare with computational predictions. In order to obtain a set of validation data for computational models, an extensive wind tunnel test campaign was funded by the Mars Sample Return Earth Entry System project. The first entry in the test campaign was completed in April of 2023, which was an investigation of turbulent heating augmentation due to woven thermal protection system roughness on the 52.5 degree Mars Sample Return - Earth Entry System vehicle forebody geometry. This test entry produced the first ever experimental aeroheating data on a 52.5 deg sphere-cone geometry as well as the first NASA experimental aeroheating data on a woven surface roughness pattern. Data obtained from this test campaign is being directly leveraged to support the NASA flight program, as experimental results are being utilized to validate the computational models which characterize the aeroheating environment that the vehicle experiences and predict turbulent surface heating levels and margins across the woven surface.
Jonathan Cheatwood↗
Flight Mechanics Modeling and Simulation of the Earth Entry System
Introduction: The Mars Sample Return (MSR) Campaign being planned by NASA and ESA has the ambitious goal to return Mars samples back to Earth. This international collaboration had developed a concept of operations that included a ESA-designed Earth Return Orbiter (ERO) and NASA-designed Capture, Containment, and Return System (CCRS). The Earth Entry System (EES), consisting of a protective aeroshell that houses the samples as well as sample containment vessels, would conduct entry, descent, and landing (EDL) on a direct Earth trajectory. The EES would enter on a spin-stabilized ballistic trajectory with the goal to passively achieve aerodynamic stability throughout all regions of flight. The EDL sequence would end with the EES impacting the soft playa soil of the Utah Test and Training Range (UTTR). As of the submission of this abstract, the MSR campaign is undergoing a re-architecture leading to a pause in EES development. However, the novel approaches developed in flight mechanics modeling and simulation can significantly benefit the greater IPPW community in the development of Earth return vehicles. This paper will present the latest state of EES flight mechanics modeling and simulation. The paper will highlight the simulation architecture developed and key lessons learned from understanding of EDL trajectory sensitivities. Modeling and Simulation: Figure 1 provides a high-level concept of operations for the approach, entry, descent, and landing (AEDL) phase of the CCRS-portion of MSR. The objective of EES flight mechanics is to model and simulate the EES trajectory from ERO separation to ground impact at UTTR. A variety of flight mechanics simulation models were utilized to model both exo-atmopsheric and atmospheric portions of flight. 42, a 6-DOF simulation developed at Goddard Space Flight Center, is utilized for propagating the attitude of EES during exo-atmospheric flight. 42 allows for a variety of spin eject mechanism scenarios to be simulated for analysis. 10 minutes prior to entry, the 42 states are handed off to the EDL sims. The prime EDL sim utilized by EES is the Program to Optimize Simulated Trajectories II (POST2), a 6-DOF sim developed at Langley Research Center, and the independent verification and validation EDL sim utilized is DSENDS, a 6-DOF sim developed at Jet Propulsion Laboratory. Figure 2 provides a visualization of the flight mechanics simulation model flow through various points in the AEDL phase. Due to the existence of a variety of sim models, the EES flight mechanics team developed processes for data hand-off. These processes included the development of a centralized coordinate frame document, utilization of a single, centralized simulation input document for all sims to reference, and hand-off files containing both the technical data to be ingested by other flight mechanics sims as well as annotations of modeling assumptions utilized to generate the data. Figure~\ref{fig:post2simarchitecture} provides an overview of the POST2 sim architecture wherein POST2 ingests numerous subsystem models and input files. The dispersed state file generated by MONTE provides the position/velocity state of the trajectory while the 42 Handoff file provides the attitude. The aerodynamics database, delivered by the EES aeroscience team, is utilized to simulate the aerodynamic forces and moments experienced during EDL. A custom atmosphere model, developed by EES atmosphere team, is utilized to simulate the anticipated atmosphere environment around the region of Earth through which the EES trajectory flys. These inputs and subsystem models can be varied depending on the AEDL flight mechanics scenario being simulated. Monte Carlo simulations are utilized to generate statistical AEDL performance metrics in the form of scorecards and violin plots. Furthermore, outputs from the POST2 simulation are utilized for follow-on analyses including aerothermal and landing performance. \section{Flight Mechanics Lessons Learned} Though the EES flight mechanics team uncovered a variety of lessons learned through the analysis conducted to support CCRS through preliminary design review, this paper will highlight the most important lessons. A key AEDL performance goal is to ensure the landing footprint of EES remains on the UTTR south range. A common modeling strategy used in EDL analysis is One-Variable-At-a-Time (OVAT). OVAT analysis provides insight into the key drivers that affect AEDL performance metrics. Figure 3 shows the landing ellipses for single dispersion sources as compared to the baseline aggregate of all dispersions. The figure shows that atmosphere winds alone dominate the size of the footprint ellipse (note: EES does not use a parachute unlike previous Earth-return missions and is in wind-driven free fall for ~5min). The significance of the wind led the EES flight mechanics team to pursue the development of a Custom Atmosphere Model [4], in lieu of EarthGRAM [1], built on actual radiosonde wind measurements around the UTTR-region. This decision was driven by the realism in the generated footprint ellipses and lessons-learned from Stardust [5]. These findings will be invaluable for future Earth-return missions in providing an early understanding of the key drivers affecting footprint size and modeling considerations for which to account. Another lesson learned is tied to the AEDL performance goal of achieving passive stability throughout all regions of flight. It is well understood that blunt-body aeroshells are less stable as they transition from supersonic to subsonic. Eliminating a backshell does help improvestability; however, other phenomena such as roll-induced instability during terminal descent can still arise. The EES flight mechanics team developed stability metrics as tools to better understand the causes of and better predict the onset of dynamic instability. These tools were built upon analytical models developed by Jaffe [3] and Murphy [2]. The tools were shown to both be very accurate in correlation with actual unstable cases and useful in developing stability margin policies based on the vehicle design and simulation considerations (e.g. sphere-cone angle change, mass change, wind turbulence). These tools allowed for the current EES design to demonstrate the ability to achieve passive stability and can be an invaluable tool for consideration in the design of parachute-less Earth-return vehicles.
Rohan Deshmukh↗
Earth Entry System Atmosphere Model Study
The Mars Sample Return Campaign has the ambitious goal of returning Mars samples back to Earth [1]. The Earth Entry System (EES), containing the samples, conducts entry, descent, and landing (EDL) on a direct Earth trajectory. During EDL, the EES traverses through many regions of Earth’s atmosphere before impacting the ground at Utah Test and Training Range (UTTR). This poster highlights preliminary results from a study that assessed the flight mechanics simulation sensitivity to atmosphere model settings and investigated the validity of current atmosphere models as compared to available atmospheric data measurements.
Rohan Deshmukh↗
Overview of Micrometeoroid and Orbital Debris Analysis Process for Mars Sample Return Earth Entry System
Introduction: Micrometeoroid and orbital debris (MMOD) risk analyses for the Mars Sample Return (MSR) Earth Entry System (EES) have been significantly more rigorous than previously flown missions because of its categorization as a Class V restricted return mission. This means the returned samples present significant concern for biogenic contamination. These analyses seek to determine if a micrometeoroid or orbital debris strike would result in loss of containment assurance and are summarized in the flowchart in Fig. 1. Methodology: The mission is considered in two MMOD phases: a pre-release phase where the EES is protected by a Micrometeoroid Protection System (MMPS) and a post-release phase called “free-flight” where the EES is exposed directly to the MMOD environment. These phases correspond to interplanetary cruise and imminent re-entry, respectively. To inform the MMPS design, a 30-shot high velocity impact testing (HVIT) series on candidate configurations at NASA White Sands Test Facility was completed in the summer of 2022. Sample post-shot images are shown in Fig 2 [1]. These data are used to baseline the MMPS design and to tune the hydrocode simulations. ALE3D, CTH, and SPHC are the hydrocodes that simulate physics of high-speed impacts [2]. Results generated with these populate a penetration depth versus energy space beyond the testable velocity regime of HVIT (~7 km/s). The penetration depth versus energy space data are used to define a critical projectile diameter function called a Ballistic Limit Equation (BLE), where the projectile “criticality” is determined by zone dependent failure criteria defined a-priori [3]. For example, the nose of the heatshield has a failure criterion of 50% TPS penetration, assigned because the landing loads are concentrated on that region and no substructure damage is permitted. The BLEs for each vehicle material zone are input into the BUMPER 3 code, along with the vehicle surface mesh and the corresponding space environment model, to calculate a probability of penetration or number of penetrations. The environment models, MEM3 for MM and ORDEM 3.2 for OD, simulate the meteoroid environment from 0.2 to 2 au based on the Grün flux equation, and the debris environment up to 40,000 km altitude from Earth surface, respectively [4,5]. Presentation Focus: The presentation or poster will present the results to-date focusing on the full risk analysis process flow seen in Fig. 1. Details on the derivation of the failure criteria will be discussed, along with HVIT results and how these influenced the MMPS configuration baseline decision. Further, results of hydrocode simulations will be presented and the tuning to HVIT outputs will be described. Finally, the strategies that direct the BLE formulation will be reviewed, specifically, for the EES elements that are most exposed to the MMOD environment.
mmod↗
Mars Sample Return Earth Entry System Helicopter Drop Test Reconstruction
The Mars Sample Return campaign conducted four successful helicopter drop tests of the Earth Entry System at the Utah Test and Training Range on October, 2023. The tests acquired data for the 52.5 deg sphere cone geometry that can be used to develop models for the terminal descent aerodynamics and flight dynamics used to model ground impact conditions. The acquired test data included both sensor data outputs from an on-board inertial measurement unit, global positioning system, and video cameras as well as atmospheric measurements from weather balloons. This data was processed using a Kalman filter/smoother to reconstruct the capsule’s trajectory and aerodynamics. An equation-error method was used to reconcile the aerodynamics by solving for a set of dispersions in the aerodynamic database that form a best-fit to the reconstructed aerodynamics. The reconstructed trajectories were compared with flight simulations generated using Program to Optimize Simulated Trajectories II. The results indicate that the simulation underpredicted the vehicle oscillation amplitudes. The reconstruction exhibits a persistent low-amplitude oscillation that does not damp out as predicted.
Chris D Karlgaard↗
Mars Sample Return Earth Entry System Helicopter Drop Test Reconstruction
The Mars Sample Return campaign conducted four successful helicopter drop tests of the Earth Entry System at the Utah Test and Training Range on October, 2023. The tests acquired data for the 52.5 deg sphere cone geometry that can be used to develop models for the terminal descent aerodynamics and flight dynamics used to model ground impact conditions. The acquired test data included both sensor data outputs from an on-board inertial measurement unit, global positioning system, and video cameras as well as atmospheric measurements from weather balloons. This data was processed using a Kalman filter/smoother to reconstruct the capsule’s trajectory and aerodynamics. An equation-error method was used to reconcile the aerodynamics by solving for a set of dispersions in the aerodynamic database that form a best-fit to the reconstructed aerodynamics. The reconstructed trajectories were compared with flight simulations generated using Program to Optimize Simulated Trajectories II. The results indicate that the simulation underpredicted the vehicle oscillation amplitudes. The reconstruction exhibits a persistent low-amplitude oscillation that does not damp out as predicted.
Chris D Karlgaard↗
3D Woven Mid-Density Carbon Phenolic (3MDCP) Full-Scale Heatshield Development for Mars Sample Return (MSR) Earth Entry System (EES)
The Mars Sample Return (MSR) mission will be returning samples of Martian soil to Earth. The samples will be returned in the Earth Entry System (EES). The EES capsule is protected by a new thermal protection system; the 3-Dimensionally Woven, Mid-Density, Carbon Phenolic (3MDCP) material which is derived from the Heatshield for Extreme Entry Environment Technology (HEEET). The baseline 3MDCP design is a single piece thermal protection system that avoids the manufacturing and certification challenges associated with a tiled configuration. A 3MDCP heatshield begins as a flat woven preform that is formed to the final heatshield shape and then infused with phenolic resin. A NASA Ames lead team, in collaboration with Spirit Textiles (formerly TEAM Inc.), Fiber Materials Inc. (FMI, a Spirit AeroSystems Company), and Kratos SRE, has been developing and demonstrating the processes to fabricate the 3MDCP heatshield and characterize the resulting properties. The process of forming the flat woven preform into the final heatshield shape, a sphere-cone geometry with a 52.5° cone angle, involves local but substantial movement of the yarns in the weave. This results in continuous fibers across the single piece heatshield, albeit with property variations between different regions of the heatshield. This presentation will provide a high-level status of 3MDCP development for the MSR EES heatshield. This will include an overview of the manufacturing processes with an emphasis on the impact of forming on fiber orientation, material properties, and performance. Results comparing preliminary formed and flat materials will be shown. Additionally, the presentation will layout the broader plan for property testing and tie-in to aerothermal performance.
Peter Edward Marshall↗
Improved Aerothermal Reliability Analysis Enabled by the Mars Sample Return Earth Entry System Aerothermal Database
The Mars Sample Return (MSR) campaign is a series of missions designed to retrieve Martian rock and soil samples for detailed study on Earth. The campaign is split into three primary phases: sample collection with the Mars2020 rover, retrieval with the Sample Return Lander (SRL) and Mars Ascent Vehicle (MAV), and then return to Earth with the Earth Return Orbiter (ERO) and Capture, Containment, and Return System (CCRS) [1]. The final sequence in the Earth return phase is the delivery and entry of the Earth Entry System (EES) sample return capsule. Due to unprecedented planetary protection concerns, the sample return capsule is subject to strict reliability requirements. To this end, the MSR-EES aerothermal team has implemented a flexible aerothermal database architecture capable of integration with state-of-the-art trajectory codes to provide a more rigorous aerothermal reliability analysis. The EES database enables the generation of environments at any location on the heatshield and can incorporate trajectory uncertainties to both statistically quantify aerothermal environments for arcjet testing and produce material response boundary conditions to rigorously select thermal protection system (TPS) sizing environments. This poster will not discuss the fundamental modeling assumptions included in the database, and will instead focus on the downstream reliability analyses that can be performed with a database of this architecture.
MSR-EES↗
Progress Toward Evaluating Roughness-Resolved Aerothermodynamic Simulations for the Mars Sample Return Earth Entry System
This work pursues the efficient Navier-Stokes simulation, using NASA’s standard LAURA and DPLR simulation tools, of the flowfield and convective heating resulting from the patterned-roughness surface of the Mars Sample Return (MSR) Earth Entry System (EES). This type of simulation has been infeasible for past NASA missions. However, for EES, the combination of a patterned roughness heatshield approximated with a sinusoidal pattern, the zero degrees angle of attack nominal flow, and the supersonic boundary layer edge Mach number, all combine to make these roughness resolved grid simulations feasible. The patterned roughness and zero degrees angle of attack nominal flow allow the simulation domain to be reduced to a thin axial flowfield slice that captures a minimum of single period of the roughness pattern. With a periodic boundary condition applied along the boundaries of this slice, simulation on the reduced domain is identical to the full domain but with significant cost saving. The supersonic boundary layer edge Mach number prevents the upstream influence, which allows the smooth stagnation region to be frozen. This freezing of the stagnation region flow is required because of the numerical instability resulting from the tight spacing of the grid in the axial direction as the stagnation point is approached. Applying the developed analysis approach to a peak heating EES case results in a roughness augmentation factor for the convective heating of 1.32, which agrees well with correlations that predict values between 1.30 and 1.37. Analysis approach developed in this work provides the framework for future studies of turbulence modeling impacts and the influence of an ablating surface.
Earth Entry System↗
Atmosphere Modeling and Performance Sensitivity for the Mars Sample Return Earth Entry System
The Capture, Containment, and Return System (CCRS) mission is a key element of the joint NASA-European Space Agency (ESA) planned Mars Sample Return (MSR) Campaign. The CCRS assembled Earth Entry System (EES) will enter the mission’s final segment in its Approach, Entry, Descent, and Landing (AEDL) Phase. The EES AEDL aims to deliver a highly reliable, safe, and accurate return while maintaining strict containment assurance targets established by the campaign. As currently designed, the EES would be the first fully passive sample return capsule with no parachute or onboard control system, prompting a significant effort in Earth atmosphere characterization and modeling. Earth’s atmosphere, specifically winds, have a strong influence on EES flight mechanics and landing footprint during its free fall landing. This paper describes Earth atmosphere modeling, atmosphere characterization, and performance sensitivities incorporated into the teams’s efforts to ensure AEDL success. By utilizing high resolution balloon radiosondes, analyzing wind structural and distributional compositions, and investigating flight mechanics sensitivities, the AEDL atmosphere team has been able to better understand and simulate local wind conditions at the Utah Test and Training Range (UTTR). Utilizing tools such as horizontal turbulent kinetic energy, vertical wind shear, or integrated wind, the team have been able to reveal valuable information about wind profiles in a deeper context than previously conducted, ultimately improving understanding of AEDL flight mechanics sensitivity and EES design.
Kaustubh Ray↗
Mechanical Testing of Soils from the South Range of the Utah Test and Training Range: Derivation of Soil Properties to Support the Earth Entry System Landing for Mars Sample Return
This report summarizes results from laboratory tests conducted by Applied Research Associates, Inc. (ARA) on soil samples collected from multiple sites within the South Range of the U.S. Air Force Utah Test and Training Range (UTTR). The goal of the laboratory tests was to establish soil constitutive properties and develop computational soil models enabling NASA to simulate impact landings of the Earth Entry System (EES) for the Mars Sample Return (MSR) mission. Test methods and results are presented describing the strength, compressibility, and stiffness of soils in the UTTR South Range including methods to incorporate the measured properties into Ansys LS-DYNAÒ constitutive material models for EES landing simulations.
Soil↗
Status of the 3-MDCP, the 3-D Woven TPS enabling MSR Earth Entry System Development
While the HEEET project established the dual-layer, 3-D Woven TPS at TRL 6 for extreme entry environment missions such as Saturn and Ice-Giant Probe missions, subsequent to the completion of HEEET project in 2018, further development was undertaken to assess the viability of a variant of the 3-D Woven, a single, insulating layer alone as a viable TPS for Mars Sample Return mission. MSR Earth Entry System (EES) baselined it and named the TPS as 3D, mid-density, carbon-phenolic (3MDCP). MSR program invested in building a new loom and the weaver T.E.A.M. Inc is currently weaving 80” wide 1.2” thick insulating layer. Unlike HEEET, where a set of tiles and seams are integrated to form the heat-shield, 3MDCP is a seamless heatshield by wrapping and shaping a flat panel into the heatshield shape and then rigidizing the preform through resin infusion. MSR EES is investing in technology maturation of 3MDCP for the current mission launch in 2027. This lighting talk will provide key developments and time line for 3MDCP technology maturation to show that 3MDCP will be ready to support future UOP or Saturn Probe mission. In addition, the limitations of the capability will be presented so that Saturn mission proposers as well as UOP flagship mission study can be fully informed as to the 3MDCP capability.
HEEET↗
State of the Art Thermal Protection Systems at NASA for Outer Planet Probes and Mars Sample Return Mission Earth Entry System
Explore the source record for details and available documents.
Thermal Protection System↗