SEARCH · Search NASA

Results for “Elastic energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Absorptive corrections to the electromagnetic form factor in high-energy elastic proton-proton scattering

Recently, it was noted that absorptive corrections to the electromagnetic form factor in high-energy proton-proton scattering are important for the theoretical interpretation of the p ↑ p and p ↑ A analyzing power A N ( t ) measurements with the Hydrogen Jet Target polarimeter (HJET) at RHIC. Here, a concise expression for the absorptive correction was derived within the eikonal approach. The resulting analysis reveals a systematic bias, nearly independent of the beam energy, in the experimental determination of the real-to-imaginary ratio ρ when absorption effects are overlooked in the data analysis. Quantification of this bias, as ρ meas = ρ + ( 0.036 ± 0.016 ) bias , was achieved using a Regge fit applied to available proton-proton measurements of ρ meas ( s ) and σ tot meas ( s ) . Considering the potential impact of such an effect on the experimentally determined A N ( t ) , one may enhance consistency between the HJET and STAR measurements of the hadronic spin-flip amplitude. While the sign of the bias in the value of ρ aligns with the anticipated effective increase in the proton charge radius in p p scattering due to absorption, it amplifies the observed discrepancy between σ tot meas and ρ meas values at s = 13 TeV as measured in the TOTEM experiment. Evaluation (using published TOTEM data) of the measured proton-proton d σ / d t dependence on the absorptive corrections indicated that possible soft photon corrections to the hadronic amplitude slope may be essential for such data analysis. Published by the American Physical Society 2024

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Ferri-ionic coupling in Cu In P 2 S 6 nanoflakes: Polarization states and controllable negative capacitance

We consider nanoflakes of van der Waals ferrielectric Cu In P 2 S 6 covered by an ionic surface charge and reveal the appearance of polar states with a relatively large polarization of approximately 5 µC/ cm 2 and stored free charge of around 10 µC/ cm 2 , which can mimic “midgap” states associated with a surface-field-induced transfer of Cu and/or In ions in the van der Waals gap. The change in the ionic screening degree and mismatch strains induce a broad range of the transitions between paraelectric phase, antiferroelectric, ferrielectric, and ferri-ionic states in Cu In P 2 S 6 nanoflakes. The states’ stability and/or metastability is determined by the minimum of the system free energy consisting of electrostatic energy, elastic energy, and a Landau-type four-well potential of the ferrielectric dipole polarization. The possibility of governing the transitions by strain and ionic screening can be useful for controlling the tunneling barrier in thin-film devices based on Cu In P 2 S 6 nanoflakes. Additionally, we predict that the Cu In P 2 S 6 nanoflakes reveal features of the controllable negative capacitance effect, which make them attractive for advanced electronic devices, such as nanocapacitors and gate oxide nanomaterials with reduced heat generation. Published by the American Physical Society 2024

Physics↗

DOE OSTI2024

Comparison of excess free energy at an interface according to the applied interpolation scheme for elasticity: A phase-field method

Phase-field modeling is an effective simulation technique for modeling microstructure evolution of elastically anisotropic systems. To introduce the elastic energy contribution in a phase field model, an interpolation scheme is used to define the mechanical properties within the phases and across the continuous interface. Several existing interpolation schemes introduce a potential excess elastic energy at the interface, which undesirable effect on microstructure evolution needs to be evaluated. In this study, we focused on three interpolation schemes including Khachaturyan’ scheme (KHS), Voigt–Taylor’s scheme (VTS), and Steinbach–Apel’s scheme (SAS). Comparisons of these schemes’ performances were performed in three configuration types using the MOOSE (Multiphysics Object-Oriented Simulation Environment) framework: bi-crystal, isotropic particle-matrix and anisotropic particle-matrix. The contribution of excess elastic energy on the interface energy as a function of interface width and the computational time to steady-state were evaluated in these three configurations. SAS introduces the lowest excess elastic energy contribution and the VTS has the biggest contribution amongst the considered schemes. Moreover, when modeling precipitation in an anisotropic elastic material, the SAS approach seems to predict more physical convex shapes during growth, making it preferable to KHS and VTS. Finally, as currently implemented, SAS requires the largest computational time and KHS requires the smallest time to reach steady-state amongst the considered schemes.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Nanocrystal Geometry Governs Phase Transformation Pathways in Palladium Hydride

Pathways and structural dynamics of phase transformations impact performance of materials in energy and information storage technologies. Palladium hydride (PdH x ) nanocrystals are an ideal model system for studying solute-induced phase transformations, where elastic energy from lattice mismatch between α-PdH x and β-PdH x phases is often considered a key to determining the transformation pathways. α/β-PdH x interfacial elastic energy is affected by the confined geometry of a nanocrystal. However, how nanocrystal geometry influences phase transformation pathways is largely unknown. Using in situ liquid phase transmission electron microscopy, we directly visualize hydrogenation in Pd nanocrystals with two geometries, a nanocube and a hexagonal nanoplate. Both follow similar sequences of an initially curved nucleus, interface flattening, and reverse-stage nucleation; however, their evolving α/β-PdH x interfaces exhibit geometry-dependent crystallographic alignments. In nanocubes, {100}-aligned configurations conform to static elastic energy ordering, representing a pathway that maintains a local mechanical equilibrium, whereas nanoplates display both {110}- and {211}-aligned interfaces. Theoretical simulations show that geometry determines the accessibility of alternative phase transformation pathways as the system is driven far from equilibrium during hydrogenation. In conclusion, these findings identify geometry as a fundamental parameter for directing phase transformation pathways, offering design principles for accessing atypical configurations and improving properties of intercalation-based devices.

Lee, Daewon [Lawrence Berkeley National Laboratory↗

DOE OSTI2024

Novel ceramic capacitors with ultrahigh energy density and efficiency (Final Technical Report)

Antiferroelectric ceramics are a special class of material that have shown great potential as the dielectric in electrical capacitors due to their high energy- and power-density. During each charge-discharge cycle, the ceramic undergoes transformation to a ferroelectric phase and resumes its antiferroelectric phase. The hysteresis associated with the transitions leads to a mediocre energy efficiency and service lifetime of antiferroelectric capacitors and, hence, their almost absence in commercial products. Under the support of this research project, we first formulated a universal lattice-compatibility theory that included electrostatic polarization energy along with elastic energy and thermal energy to understand the origin of the hysteresis in antiferroelectric oxides. Guided by this compatibility theory, we conducted high-throughput density functional theory (DFT) calculations to assess chemical modifiers and their effect on crystal structures of 400+ PbZrO 3 -based compositions. Down-selected compositions were experimentally validated for their suppressed hysteresis and higher energy efficiency. The verified low-hysteresis compositions were then expanded to an antiferroelectric ceramic library with nearly 500 new compositions (more than 1,500 samples) using high-throughput experiments involving ceramic synthesis and property screening. The large quantity of data generated (theory and experimental) in these tasks were processed by machine-learning techniques and identified trends were fed to the next iteration. In the end, we successfully discovered four compositions with near-zero hysteresis, yielding a world-record energy efficiency of 98.2% at an energy density of 3.0 J/cm 3 . Furthermore, our antiferroelectric ceramic capacitor reaches 79.5 million charge-discharge cycles lifetime, a factor of 80 enhancement over previous antiferroelectric ceramics with large hysteresis. These research accomplishments have not only met the milestones set in the SOPO, but also led to two patent filings, three journal publications (one of them was in Advanced Materials, impact factor 29.4), and nine oral presentations at various venues. Through the course of the project, three postdocs, four Ph.D. students, and one M.S. student were trained. In short, our project established a new methodology in searching next-generation functional ceramics on the fundamental side and discovered several high-efficiency antiferroelectric compositions for capacitors on the applied side. Once fabricated into the multilayer form for commercial applications, these ceramic capacitors can potentially enable the high temperature high power density DC-link capacitors that are critical for the next generation inverters in electric vehicles. The project also significantly contributed to the nation’s workforce development in the STEM fields.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Nanometer-Scale Acoustic Wave Packets Generated by Stochastic Core-Level Photoionization Events

We demonstrate that the absorption of femtosecond hard x-ray pulses excites quasispherical, high-amplitude, and high-wave-vector coherent acoustic phonon wave packets using an all hard-x-ray pump-probe scattering experiment. The time- and momentum-resolved diffuse scattering signal is consistent with an ensemble of 3D strain wave packets induced by the rapid electron cascade dynamics following photoionization at uncorrelated excitation centers. We quantify key parameters of this process, including the localization size of the stress field and the photon energy conversion efficiency into elastic energy. The parameters are determined by the photoelectron and Auger electron cascade dynamics, as well as the electron-phonon interaction. In particular, we obtain the localization size of the observed strain wave packet to be 1.5 and 2.5 nm for bulk SrTiO 3 and KTaO 3 single crystals, respectively. The results provide crucial information on the mechanism of x-ray energy deposition into matter and shed light on the shortest collective length scales accessible to coherent acoustic phonon generation using x-ray excitation. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗

DOE OSTI2025

Towards a Deeper Fundamental Understanding of (Al,Sc)N Ferroelectric Nitrides

Density functional theory (DFT) calculations, within the virtual crystal alloy approximation, are performed, along with the development of a Landau-type model employing a symmetry-allowed analytical expression of the internal energy and having parameters determined from first principles, to investigate properties and energetics of Al1-xScxN ferroelectric nitrides in their hexagonal forms. These DFT computations and this model predict the existence of two different types of minima, namely, the fourfold-coordinated wurtzite (WZ) polar structure and a five-fold coordinated paraelectric hexagonal phase (denoted as H5), for any Sc composition up to 40%. The H5 minimum progressively becomes the lowest-energy state within hexagonal symmetry as the Sc concentration increases from 0 to 0.4. Furthermore, the model points to several key findings. Examples include the crucial role of the coupling between polarization and strains to create the WZ minimum, in addition to polar and elastic energies, and that the origin of the H5 state overcoming the WZ phase as the global minimum within hexagonal symmetry when increasing the Sc composition mostly lies in the compositional dependency of only two parameters-one linked to the polarization and another one being purely elastic in nature. Other examples are that forcing Al1-xScxN systems to have no or a weak change in lattice parameters when heating them allows us to reproduce their finite-temperature polar properties well and that a value of the axial ratio close to that of the ideal WZ structure implies a large polarization at low temperatures but not necessarily at high temperatures because of the ordered-disordered character of the temperature-induced formation of the WZ state. Such findings should allow for a better fundamental understanding of (Al,Sc)N ferroelectric nitrides, which may be used to design efficient devices having, e.g., low operating voltages.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Computational modeling of phononic pseudocrystal isolators

Methods for the efficient computational prediction of the performance of phononic pseudocrystals (structured materials capable of blocking extraordinary ranges of frequency) in COMSOL and other comparable finite element method codes are set forth. These methods include boundary conditions that make possible halving the size of the computational domain. Also included is an introduction of elastic energy density methods for assessing the extinction of elastic waves within the patterned region.

Swift, Stephen Hales↗

DOE OSTI2025

Reference lattice, sound, stiffness, and magnetic transitions of Ising monolayers

A reference lattice, away from which elastic distortions induced by the spin texturing of two-dimensional (2D) magnets take hold, is motivated from a picture of pairwise Biot-Savart interactions among identical solenoids that either elongate or compress a (“zero-current”) spring lattice. Applied to a paradigmatic CrSiTe 3 monolayer, the reference is given by the average between the atomic positions of ferromagnetic (FM) and Néel antiferromagnetic (AFM) lattices; such an atomic disposition permits understanding structural distortions and elastic energies due to magnetism readily. Furthermore, the anisotropic speed of sound in the magnetic ground state explains an observed anisotropy of vibrational frequencies on similar magnets. Elastic stiffness constants are reported, too. Magnetic energies in four Ising structural configurations were calculated and the strain needed for those 2D magnets to undergo an AFM to FM quantum phase transition was determined as well.

density functional theory↗

DOE OSTI2025

Phase-field modeling of orientation-dependent crack growth in ductile single crystals with anisotropic elasticity

Crack growth in ductile single crystals (DuSCs) is orientation dependent due to the anisotropies of crystal plasticity and elastic tensor. This study develops a phase-field model incorporating both crystal plasticity and crack growth and proposes a general method to decompose the elastic energy into compressive and tensile parts to prevent crack growth under compression in the phase-field description. The phase-field model, in combination with three Euler angles, is employed to simulate orientation-dependent crack growth in DuSCs. The contributions from crystal plasticity and anisotropic elasticity are compared, and the former is found to dominate in the anisotropy of crack growth in copper single crystals. Furthermore, the simulation results demonstrate that crystal orientation strongly affects the heterogeneous distribution of plastic strain and the interaction between plastic strain and crack growth. High-throughput phase-field simulations are performed with exhaustive crystal orientations, and the results are explained based on the anisotropy of the Taylor factor.

Computational Solid Mechanics↗

DOE OSTI2026

Computationally efficient method for determining limiting velocities of edge dislocations in anisotropic crystals

The continuum-limit theory of dislocations in crystals predicts divergences in the elastic energy at crystal-geometry dependent limiting velocities vL, which separate subsonic, transsonic, and supersonic dislocation glide regimes and are therefore import for material strength models at high strain rates. Although it is known how to calculate those limiting velocities, there is one special case - edge dislocations with reflection symmetry, but non-vanishing elastic constants c16 or c26 - where previous methods have been notoriously slow. In this letter, we address this deficiency by deriving a computationally efficient method for determining the limiting velocities of edge dislocations with reflection symmetry which is two orders of magnitude faster than the previous method.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Realizing mechanical frustration at the nanoscale using DNA origami

Structural designs inspired by physical and biological systems have been previously utilized to develop mechanical metamaterials with enhanced properties based on clever geometric arrangement of constituent building blocks. Here, we use the DNA origami method to realize a nanoscale metastructure exhibiting mechanical frustration, a counterpart of the well-known phenomenon of magnetic frustration. By selectively actuating reconfigurable struts, it adopts either frustrated or non-frustrated states, each characterized by distinct free energy profiles. While the non-frustrated state distributes the strain homogeneously, the frustrated mode concentrates it at a specific location. Molecular dynamics simulations reconcile the contrasting behaviors and provide insights into underlying mechanics. We explore the design space further by tailoring responses through structural modifications. Our work combines programmable DNA self-assembly with mechanical design principles to overcome engineering limitations encountered at the macroscale to design dynamic, deformable nanostructures with potential applications in elastic energy storage, nanomechanical computation, and allosteric mechanisms in DNA-based nanomachinery.

DNA nanostructures↗

DOE OSTI2026

Scattering Processes from Quantum Simulation Algorithms for Scalar Field Theories

We provide practical simulation methods for scalar field theories on a quantum computer that yield improved asymptotics as well as concrete gate estimates for the simulation and physical qubit estimates using the surface code. We achieve these improvements through two optimizations. First, we consider a finite volume approach for estimating the elements of the S-matrix. This approach is appropriate in general for 1+1D and for certain low-energy elastic collisions in higher dimensions. Second, we implement our approach using a series of different fault-tolerant simulation algorithms for Hamiltonians formulated both in the field occupation basis and field amplitude basis. Our algorithms are based on either second-order Trotterization or qubitization. The cost of Trotterization in occupation basis scales as O ( λ N 7 | Ω | 3 / ( M 5 / 2 ϵ 3 / 2 ) ) where λ is the coupling strength, N is the occupation cutoff, | Ω | is the volume of the spatial lattice, M is the mass of the particles and ϵ is the uncertainty in the energy calculation used for the S -matrix determination. Qubitization in the field basis scales as O ( | Ω | 2 ( k 2 Λ + k M 2 ) / ϵ ) , where k is the cutoff in the field and Λ is a scaled coupling constant. We find in both cases that the bounds suggest physically meaningful simulations can be performed using on the order of 4 × 10 6 physical qubits and 10 12 T -gates which corresponds to roughly one day on a superconducting quantum computer with surface code and a cycle time of 100 ns. This places the simulation of scalar field theory within striking distance of the gate counts for the best available chemistry simulation results.

Hardy, Andrew [Toronto U.] (ORCID:0000000235817382↗

DOE OSTI2025

Phase-field modeling and experiments of dynamic fracture in single crystal quartz

Predicting the onset and characteristics of brittle fracture is important for a wide range of engineering and geological material applications. In this paper, we study important aspects of brittle fracture in α-quartz by phase-field modeling and experiments using a top-down approach. In the modeling framework, the work term in the Griffith energy balance is replaced with internal energy contributions that represent surface energy, thermal energy, and elastic strain energy stored in defects. This allows parametrization of individual energy contributions in terms of internal state variables and keeps track of energy partitioning after the onset of fracture. The path and history dependence of fracture is included in evolution laws for internal state variables, e.g., entropy evolution, while the energy remains a true potential. In the experimental part, dynamic compression experiments coupled with X-ray phase contrast imaging are performed on cube-like samples with a hole. In the top-down analysis, dynamic compression and three point bending experiments from the literature are simulated with the developed phase-field damage model. In conclusion, the fitted model highlights the strain rate, size, and stress state dependence of damage nucleation and evolution in single crystal α-quartz.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Temperature and dose rate effects on dislocation loop formation and decoration in self-ion irradiated high-purity Fe-Cr model alloys

Body-centered cubic (BCC) Fe-based alloys are promising candidate materials for advanced nuclear reactors. A widespread perception is that the addition of Cr favors the formation of ½ <111> dislocation loops. However, the Cr effects on dislocation loop formation/evolution remain unclear due to the limited experimental studies. In this study, we irradiate ultra-high purity bulk BCC Fe-xCr (x = 3, 5, and 8 wt%) with 6.7-8 MeV Fe ions over a wide range of temperatures (Tirr = 250-500 °C) and dose rates (10⁻⁵ to 10⁻³ dpa/s) to two midrange doses (0.35 and 3.5 dpa). The major irradiation-induced microstructures are loop decoration along non-screw dislocation lines at low temperatures and high dose rates as well as self-assembled loops at elevated temperatures. Post-irradiation Burgers vector analysis via g•b method on loops and electron tomography reveals that <001> preponderance is observable in all irradiated Fe-Cr samples at elevated temperature, resulting from stronger elastic energy originating from <001> edge.

Li, Yao [University of Tennessee (UT)]↗

DOE OSTI2024

Insulating moiré homobilayers lack a threefold symmetric second-harmonic generation

Atoms within moiré bilayers relax in plane to minimize elastic energy; such relaxation brings their space group symmetries down to P1. Here, the ab initio second harmonic generation (SHG) of twisted and atomistically optimized hBN bilayers was determined at four twist angles (θ = 38.21°, 60.00°, 73.17°, and 98.21°) and for three displacements τ measured away from the ground state AA' configuration. All moiré bilayers have a P1 space symmetry after structural optimization. This situation is quite different to monolayers with hexagonal lattices, which retain a threefold symmetry. We point out that the actual symmetries of the SHG reported for hBN bilayers on two experimental works do not coincide with the sixfold symmetric theoretical profiles they provide [either sin 2 ⁡(3⁢Φ) or cos 2 ⁡(3⁢Φ)], and show that the intrinsic low structural symmetry of (atomically optimized) hBN bilayer moirés can in fact be read out from experimental SHG intensity profiles—which are tunable by θ and by the frequency of light ω: The SHG is most definitely not sixfold symmetric because moirés do not retain a threefold symmetry. Furthermore, an extrinsic twofold symmetry of the SHG emission is realized by tilting the pump by an angle α away from the 2D material's normal, regardless of θ and ω. Furthermore, the design of in-plane and ultrathin sources of SHG with low symmetry could be useful for the eventual creation of entanglement sources from 2D materials.

2-dimensional systems↗

DOE OSTI2025

Enhancing stability, magnetic anisotropy, and coercivity of manganese aluminum: Machine learning, ab initio , and micromagnetic modeling

The binary manganese aluminum (MnAl) alloy with L⁢1 0 crystal structure is a promising rare earth (RE) element-free permanent magnetic material because of its exceptional magnetic properties. However, experimentally synthesizing it in a stable bulk form is extremely challenging. Here, in this study, an alternative method of stabilizing the material, a pathway for experimental synthesis and validation, is proposed and theoretically verified. This is done by partially substituting Mn and Al sites with Fe and Ni and identifying its enhanced phase stability, saturation magnetization density, magnetic anisotropy, and coercivity from density functional theory (DFT), machine learning (ML) crystal graph convolution neural network (CGCNN), and micro-magnetic modeling. When considering a fixed 50% Ni, the magnetic anisotropy increases with the increasing Fe content but decreases the formation energy. The calculated formation energies, elastic constants, and phonon frequencies demonstrate that the binary and quaternary compositions are stable. Most importantly, in 50% Fe and Ni-substituted-equiatomic phase, magnetic anisotropy constants and saturation magnetization density increase by 56% and 23% as compared to the MnAl. Further, the coercivity of the equiatomic phase predicted with micro-magnetic modeling is higher by 17% than the parent compound.

Bhandari, Churna [Ames National Laboratory, and Io↗

DOE OSTI2025

Niobium hydride formation in superconducting qubit thin films

The formation of nonsuperconducting hydrides in 160–170-nm-thick films of niobium is examined. We identify six elastically distinct orientation relationships ɛ−Nb 4 ⁢H 3 takes within the matrix, solid-solution 𝛼−NbH 𝑥 phase. We employ a phase field model to assess the impact of elastic energy induced by the strain of phase transformation on the morphology and transformation dynamics of ɛ precipitates within a thin film. We consider the dimensions of the thin film, crystallographic growth direction, and diffusion rates to predict the timescale of hydride evolution. Leveraging the finite element method, we predict two-dimensional and three-dimensional equilibrium shapes of ɛ-hydrides within a bulk sample and in a thin film that has a traction-free surface. Our results suggest that niobium hydrides migrate to the free surface of the film. Precipitates which reach the free surface coarsen, while precipitates within the film dissolve. Precipitates in both two dimensions and three dimensions experience a repulsive interaction force at the free surface, that is attractive in the bulk, shown in experiment and theory of previous studies.

36 - MATERIALS SCIENCE↗