Search NASA⌕ Search

SEARCH · Search NASA

Results for “Elimination reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Interplay of water and a supramolecular capsule for catalysis of reductive elimination reaction from gold

Abstract Supramolecular assemblies have gained tremendous attention due to their ability to catalyze reactions with the efficiencies of natural enzymes. Using ab initio molecular dynamics, we identify the origin of the catalysis by the supramolecular capsule Ga 4 L 6 12− on the reductive elimination reaction from gold complexes and assess their similarity to natural enzymes. By comparing the free energies of the reactants and transition states for the catalyzed and uncatalyzed reactions, we determine that an encapsulated water molecule generates electric fields that contributes the most to the reduction in the activation free energy. Although this is unlike the biomimetic scenario of catalysis through direct host-guest interactions, the electric fields from the nanocage also supports the transition state to complete the reductive elimination reaction with greater catalytic efficiency. However it is also shown that the nanocage poorly organizes the interfacial water, which in turn creates electric fields that misalign with the breaking bonds of the substrate, thus identifying new opportunities for catalytic design improvements in nanocage assemblies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Ethyl transfer reactions of NaBEt 4 with Cp*Rh(PMe 3 )PhBr and elimination reactions

The reaction of NaBEt 4 with Cp*Rh(PMe 3 )PhBr produces Cp*Rh(PMe 3 )PhEt by ethyl transfer. Single crystal X-ray analysis shows a typical piano-stool geometry. This compound reacts photochemically (λ > 320 nm) to give Cp*Rh(PMe 3 )PhH as the major product, plus ethylene. A secondary product was assigned as the square planar complex RhPh(PMe 3 )(η 4 -C 5 Me 5 Et) on the basis of NMR spectroscopy. Finally, the molecule decomposes over several days at ambient temperature, releasing C 5 Me 5 Et.

02 PETROLEUM↗
DOE OSTI2025

Imaging a light-induced molecular elimination reaction with an X-ray free-electron laser

Tracking the motion of individual atoms during chemical reactions represents a severe experimental challenge, especially if several competing reaction pathways exist or if the reaction is governed by the correlated motion of more than two molecular constituents. Here we demonstrate how ultrashort X-ray pulses combined with coincident ion imaging can be used to trace molecular iodine elimination from laser-irradiated diiodomethane (CH 2 I 2 ), a reaction channel of fundamental importance but small relative yield that involves the breaking of two molecular bonds and the formation of a new one. We map bending vibrations of the bound molecule, disentangle different dissociation pathways, image the correlated motion of the iodine atoms and the methylene group leading to molecular iodine ejection, and trace the vibrational motion of the formed product. Our results provide a quantitative mechanistic picture behind previously suggested reaction mechanisms and prove that a variety of geometries are involved in the molecular bond formation.

Atomic and molecular interactions with photons↗
DOE OSTI2023

Rapid Postgrafting Reaction to Prepare Quaternized Polycarbazoles

We report a rapid postgrafting reaction to prepare alkyl ammonium functionalized polycarbazoles from a commercially available monomer. This novel synthetic approach provides benefit to preparing the high molecular weight quaternized polycarbazoles within 1 h of Friedel–Crafts polycondensation, avoiding the synthesis and purification step to prepare a functionalized monomer. The postgrafting reaction produces hexyl alkyl ammonium functionalized polycarbazole with 100% grafting degree. However, the postgrafting reaction produced only 60% grafting with propyl alkyl ammonium due to the competitive elimination reaction because of the higher acidity of β-hydrogen in the propyl alkyl group resulting from the proximity of the bromide and ammonium groups. The hexyl alkyl ammonium functionalized polycarbazole has a high hydroxide conductivity of 103 mS cm –1 at 80 °C and showed excellent alkaline stability with less than 3% loss of ion group after 1 M NaOH treatment at 80 °C for 500 h. In conclusion, this study highlights that the postgrafting reaction provides a pathway for the scale-up synthesis of quaternized aryl ether-free polyaromatics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2007

Quantum Chemical Evaluation of the Astrochemical Significance of Reactions between S Atom and Acetylene or Ethylene

Addition-elimination reactions of S atom in its P-3 ground state with acetylene (C2H2) and ethylene (C2H4) were characterized with both molecular orbital and density functional theory calculations employing correlation consistent basis sets in order to assess the likelihood either reaction might play a general role in astrochemistry or a specific role in the formation of S2 (X (sup 3 SIGMA (sub g) (sup -)) via a mechanism proposed by Saxena and Misra (Mon. Not. R. Astron. Soc. 1995, 272, 89). The acetylene and ethylene reactions proceed through C2H2S ((sup 3)A")) and C2H4S ((sup 3)A")) intermediates, respectively, to yield HCCS ((sup 2)II)) and C2H3S ((sup 2)A')). Substantial barriers were found in the exit channels for every combination of method and basis set considered in this work, which effectively precludes hydrogen elimination pathways for both S + C2H2 and S + C2H4 in the ultracold interstellar medium where only very modest barriers can be surmounted and processes without barriers tend to predominate. However, if one or both intermediates is formed and stabilized efficiently under cometary or dense interstellar cloud conditions, they could serve as temporary reservoirs for S atom and participate in reactions such as S + C2H2S (right arrow) S2 = C2H2 or S + C2H4S (right arrow) S2 + C2H4. For formation and stabilization to be efficient, the reaction must possess a barrier height small enough to be surmountable at low temperatures yet large enough to prevent redissociation to reactants. Barrier heights computed with B3LYP and large basis sets are very low, but more rigorous QCISD(T) and RCCSD(T) results indicate that the barrier heights are closer to 3-4 kcal/mol. The calculations therefore indicate that S + C2H2 or S + C2H4 could contribute to the formation of S2 in comets and may serve as a means to gauge coma temperature. The energetics of the ethylene reaction are more favorable.

Woon, David E.↗
DOE OSTI2024

Resolving Discrepancies Between Theory and Experiment for the NCN + H Reaction

Flame modeling studies have highlighted the role of branching in the kinetics for the prompt NO switch reaction, NCN + H. In this reaction, there is strong competition between the CH + N2 (R1) and HCN + N (R2) product channels. Increased branching towards reaction R2 promotes the subsequent formation of Fenimore or Prompt NO. Recent direct shock tube studies on this complex reaction conclude that branching to reaction R2 is much more favorable than the predicted branching from theoretical studies. The experimentally predicted prompt NO switch temperature (TS), i.e., the temperature at which k2/(k1+k2) = 0.5, is at 1670 K, in contrast to theory that predicts Ts > 3200 K. The present theory/modeling work was initiated to highlight potential causes for this significant discrepancy between experiment and theory. Our analysis of the simulations reported in the experimental studies indicate that including a fall-off representation for C2H5 radical dissociation (with C2H5 produced from C2H5I dissociation and acting as an H-atom source) has a noticeable influence on the simulations for NCN decay and HCN formation in the shock tube studies. With the inclusion of a theory-based pressure fall-off representation for C2H5 dissociation, we show that this radical persists for much longer timescales even at the high-temperatures in the shock tube studies. This persistence then facilitates the rapid conversion of reactive H-atoms to CH3 radicals at the shock tube conditions via the H + C2H5 → CH3 + CH3 reaction. An updated theoretical analysis for this classic addition-elimination reaction is also provided in this work. The rapid formation of CH3 radicals necessitates the inclusion of additional reactions to adequately simulate the NCN and HCN data. Our simulations conclude that, with the inclusion of these additional reactions, the NCN and HCN profiles can be reasonably well simulated by the most recent theoretical predictions.

Ethyl Radicals↗
NASA NTRS1988

Angular-Momentum-Compensating Actuator

Reactionless actuator developed for instrument-pointing platforms on flexible spacecraft; by eliminating reactions, actuator changes aiming angle of platform without inducing vibrations in spacecraft, eliminateing vibrations in point angle of instrument platform. Actuator used on Earth in such systems as helicopter platforms for television cameras in law enforcement and news telecasts.

Wiktor, Peter J.↗
DOE OSTI2024

Reconceptualizing the Ir III Role in Metallaphotoredox Catalysis: From Strong Photooxidant to Potent Energy Donor

Dual Ir III /L n Ni II metallaphotoredox catalyzed C(sp 3 )–C(sp 2 ) cross-coupling reactions are widely assumed to proceed by photoinduced single electron transfer steps due to the highly oxidizing Ir III * excited state (Ir III = [Ir(dF(CF 3 )ppy) 2 (dtbbpy)] + [PF 6 ] – ; dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; L n = dtbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine). Using time-resolved absorption and emission spectroscopy, we reveal that energy transfer between Ir III * and various LnNi II precatalysts and intermediates with k q ≥ 10 8 M –1 s –1 also drives catalysis. Specifically, the excited states of L n Ni II dihalide precatalysts/organometallic intermediates accessible by energy transfer appear to drive bond homolysis, halogen radical elimination, and reductive elimination reactions that facilitate formation of cross-coupled products. Energy transfer dynamics consequently circumvent the need for photoinduced electron transfer, thereby extending substrate scopes to coupling partners that cannot be oxidized by Ir III *. Within a cross-electrophile coupling model reaction between 4-bromobenzotrifluoride and bromocyclohexane, energy transfer activates the L n Ni II precatalyst at early reaction times before nucleophilic reductants are present. In the absence of Ir III , direct excitation of L n Ni II (Br) 2 also activates the precatalyst to form a L n Ni II (Br)(Aryl) intermediate. To compare energy transfer and electron transfer kinetics, we determined rate constants for reductive quenching by Br – (k SET = 4.1 × 10 8 M –1 s –1 ) and for the subsequent electron transfer from reduced Ir III•– to L n Ni II (Br) 2 (k SET = 4.1 × 10 7 M –1 s –1 ) using Stern-Volmer analysis and pulse radiolysis, respectively. Energy transfer rate constants are competitive with the electron transfer rate constants and energy transfer is a parallel pathway within metallaphotoredox catalysis. Exploiting the energy transfer mechanism, we demonstrate highly selective cross-electrophile coupling between 4-chlorobenzotrifluoride and bromocyclohexane to form exclusively cross-coupled product. Here, with alkyl-trifluoroborate nucleophiles that do not reductively quench IrIII* emission, transmetalation with L n Ni II (Br/Cl)(Aryl) followed by energy transfer also drives excited state reductive elimination to form C(sp 3 )–C(sp 2 ) cross-coupled product. Similarly, energy transfer rather than Ni II oxidation drives C(sp 2 )–OR reductive elimination, despite the strongly oxidizing ability of Ir III *. In total, these reactions demonstrate energy transfer processes from Ir III * to L n Ni II in metallaphotoredox catalysis that can unlock alternative reactive pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Single-Facet Dominant Anatase TiO 2 (101) and (001) Model Catalysts to Elucidate the Active Sites for Alkanol Dehydration

Alkanol dehydration on Lewis acid-base pairs of transition metal oxide catalysts is a reaction of importance in oxygen removal from biomass-derived feedstocks and their conversion to chemicals in general. However, catalysts with a high degree of structural heterogeneity, such as commercial TiO 2 powders, are not well-suited to establish rigorous structure-function relationships at an atomic level. Here, we provide compelling evidence for the effects of surface orientation of TiO 2 catalyst on elimination reactions of alcohols. Two anatase titania model catalysts, with preferential exposure of (101) and (001) facets, were synthesized and studied for 2-propanol dehydration using kinetic, isotopic, microscopic, and spectroscopic measurements, coupled with DFT calculations. Surface Lewis acid sites were found to be active for 2-propanol dehydration and (101) facets are more reactive than (001) facets under the reaction conditions studied. On both anatase surfaces, 2-propanol was found to dehydrate via concerted E2 elimination pathways, but with different initial states and thus also different intrinsic activation barriers. Molecular 2-propanol dehydration dominates on TiO2 (101) while on TiO 2 (001), 2-propanol simultaneously converts to more stable 2-propoxide before dehydration, which then requires higher activation energies for E2 elimination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Chemical reactions of metal powders with organic and inorganic liquids during ball milling

Chromium and/or nickel powders were milled in metal chlorides and in organic liquids representative of various functional groups. The powders always reacted with the liquid and became contaminated with elements from them. The milled powders had specific surface areas ranging from 0.14 to 37 sq m/g, and the total contamination with elements from the milling liquid ranged from 0.01 to 56 weight percent. Compounds resulting from substitution, addition, or elimination reactions formed in or from the milling liquid.

Arias, A.↗
NASA NTRS1976

Metal powder reactions in ball milling

On milling chromium powder in three metal chlorides and either chromium or nickel powders in ten organic liquids representative of nine different functional groups, the powders always reacted with the liquids and became contaminated with elements from them. The milled powders had specific surface areas ranging from 0.14 to 37 sq m/g, and the total contamination with elements from the milling liquid ranged from 0.01 to 56 wt%. In most milling runs, compounds resulting from substitution, addition, or elimination reactions formed in or from the milling liquid, and in most runs with organic liquids H2, CH4, and CO2 were generated.

Arias, A.↗
NASA NTRS1988

Surface-catalyzed air oxidation reactions of hydrazines: Tubular reactor studies

The surface-catalyzed air oxidation reactions of hydrazine, monomethylhydrazine, unsymmetrical dimethylhydrazine, symmetrical dimethylhydrazine, trimethylhydrazine and tetramethylhydrazine were investigated in a metal-powder packed turbular flow reactor at 55 plus or minus 3 C. Hydrazine was completely reacted on all surfaces studied. The major products of monomethylhydrazine (MMH) oxidation were methanol, methane and methyldiazene. The di-, tri- and tetra-methyl hydrazines were essentially unreactive under these conditions. The relative catalytic reactivities toward MMH are: Fe greater than Al2O3 greater than Ti greater than Zn greater than 316 SS greater than Cr greater than Ni greater than Al greater than 304L SS. A kinetic scheme and mechanism involving adsorption, oxidative dehydrogenation and reductive elimination reactions on a metal oxide surface are proposed.

Kilduff, Jan E.↗
NASA NTRS1987

Potential energy surfaces for atomic oxygen reactions: Formation of singlet and triplet biradicals as primary reaction products with unsaturated organic molecules

The experimental study of the interaction of atomic oxygen with organic polymer films under LEO conditions has been hampered by the inability to conduct detailed experiments in situ. As a result, studies of the mechanism of oxygen atom reactions have relied on laboratory O-atom sources that do not fully reproduce the orbital environment. For example, it is well established that only ground electronic state O atoms are present at LEO, yet most ground-based sources are known to produce singlet O atoms and molecules and ions in addition to O(3P). Engineers should not rely on such facilities unless it can be demonstrated either that these different O species are inert or that they react in the same fashion as ground state atoms. Ab initio quantum chemical calculations have been aimed at elucidating the biradical intermediates formed during the electrophilic addition of ground and excited-state O atoms to carbon-carbon double bonds in small olefins and aromatic molecules. These biradicals are critical intermediates in any possible insertion, addition and elimination reaction mechanisms. Through these calculations, we will be able to comment on the relative importance of these pathways for O(3P) and O(1D) reactions. The reactions of O atoms with ethylene and benzene are used to illustrate the important features of the mechanisms of atomic oxygen reaction with unsaturated organic compounds and polymeric materials.

Jaffe, Richard L.↗
DOE OSTI2026

Facet-Dependent Water Inhibition of Alkanol Dehydration on TiO2 via Distinct Water–Alkanol Complexes

Water is ubiquitous in biomass-derived feeds, yet its molecular impact on oxygen-elimination reactions remains poorly understood, particularly for catalysts exposing different facets. Here, we utilize well-defined TiO2 nanocrystals with dominant (101) and (001) facets to reveal a pronounced facet-dependent effect of water, where inhibition for dehydration of isopropanol (IPA) on the TiO2(001) surface is about four times more severe than TiO2(101). Through a combination of in situ solid state NMR, in situ infrared spectroscopy, kinetics studies, and theoretical calculations, we demonstrate that this disparity arises from the formation of distinct alkanol-water complex intermediates. On TiO2(001), IPA undergoes dissociative adsorption to form an isopropoxide-H2O complex that readily drives the surface into a complex-dominated regime. This pathway increases the activation barrier for C–H cleavage by 40 kJ mol-1 by inducing a disordered transition state. In contrast, TiO2(101) favors molecular IPA adsorption with weak hydrogen bonding to water, resulting in a smaller complex formation constant and a much smaller activation barrier increase (25 kJ mol-1). By quantitatively linking facet-dependent complex coverage to transition-state destabilization, this work moves beyond simple site-blocking models and provides a conceptual framework for designing catalysts that remain active in water-containing environments

Hu, Wenda↗
DOE OSTI2020

Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Versatile chemical transformations of surface functional groups in two-dimensional transition-metal carbides (MXenes) open up a previously unexplored design space for this broad class of functional materials. We introduce a general strategy to install and remove surface groups by performing substitution and elimination reactions in molten inorganic salts. Successful synthesis of MXenes with oxygen, imido, sulfur, chlorine, selenium, bromine, and tellurium surface terminations, as well as bare MXenes (no surface termination), was demonstrated. These MXenes show distinctive structural and electronic properties. For example, the surface groups control interatomic distances in the MXene lattice, and Ti n +1 C n ( n = 1, 2) MXenes terminated with telluride (Te 2− ) ligands show a giant (>18%) in-plane lattice expansion compared with the unstrained titanium carbide lattice. The surface groups also control superconductivity of niobium carbide MXenes.

Kamysbayev, Vladislav↗