Search NASA⌕ Search

SEARCH · Search NASA

Results for “Epoxy Resins”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reactive Modified Epoxy Resin and Its Miscible Blends Based on Recycled Oligomers from Solvolysis

Chemical depolymerization of fully cured epoxy resin with 20% reactive modifier was successfully performed via a solvent-assisted solvolysis process into low molecular weight recyclable oligomers (RO) at 240 °C in a pressure vessel at 650 psi for 4 h. The thermoset epoxy resin was depolymerized into transparent brown viscous fluid with a higher viscosity than the uncured epoxy resin with approximately 93% yield. Different concentrations of the RO were homogeneously mixed with the pure epoxy resin, and their curing kinetics, viscosity, FTIR, mechanical properties, DMA, and cross-link density were investigated. The curing kinetics of the pure reactive modified epoxy resin (baseline) and its mixtures with RO of different concentrations were investigated under both isothermal and nonisothermal conditions using small amplitude oscillatory shear flow. The elastic and viscous moduli (G′ and G″), complex viscosity (η*), and tan δ values were evaluated at different curing times and temperatures. The G′, G″, and η* increased dramatically, while tan δ decreased strongly by several orders of magnitude at the gel point. The zero-shear viscosity (η 0 ) was determined from the angular frequency dependent on η* based on the Cross model for different blend compositions in the liquid state before curing. The composition dependence of η 0 showed a positive deviation from the linear mixing rule and was well described by the Lecyar model. Here, the apparent activation energy of curing (E a ) was also evaluated according to the Arrhenius equation and was found to be 46 ± 2 kJ/mol regardless of the different contents of RO. For all blends up to 40 wt % RO, only one tan δ peak systematically shifting to lower temperatures with increasing content of RO was observed in the DMA measurements, indicating that the epoxy resin and the RO are miscible with up to 40 wt % RO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey

High performance polymers with bio-based modifiers are promising materials in terms of applications and environmental impact. In this work, raw acacia honey was used as a bio-modifier for epoxy resin, as a rich source of functional groups. The addition of honey resulted in the formation of highly stable structures that were observed in scanning electron microscopy images as separate phases at the fracture surface, which were involved in the toughening of the resin. Structural changes were investigated, revealing the formation of a new aldehyde carbonyl group. Thermal analysis confirmed the formation of products that were stable up to 600 °C, with a glass transition temperature of 228 °C. An energy-controlled impact test was performed to compare the absorbed impact energy of bio-modified epoxy containing different amounts of honey with unmodified epoxy resin. The results showed that bio-modified epoxy resin with 3 wt% of acacia honey could withstand several impacts with full recovery, while unmodified epoxy resin broke at first impact. The absorbed energy at first impact was 2.5 times higher for bio-modified epoxy resin than it was for unmodified epoxy resin. In this manner, by using simple preparation and a raw material that is abundant in nature, a novel epoxy with high thermal and impact resistance was obtained, opening a path for further research in this field.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of a composite flame retardant system on the flame retardancy and mechanical performance of epoxy resin adhesive

Abstract A flame‐retarded epoxy resin (ER) adhesive with strong flame retardancy and adhesion performance was prepared. The coated ammonium polyphosphate (MFAPP), melamine (MEL), and organic montmorillonite (OMMT) were mixed to prepare a composite flame retardant. It was subsequently blended with a toughened ER thoroughly and then the mixture was cured with polyamide. The resultant ER adhesive thermosets achieved UL‐94 V‐0 rating during vertical burning test, and the limiting oxygen index value was as high as 31.6%. The shear strength of the ER adhesive was 27.9 MPa when 25 wt% MFAPP/MEL/OMMT was introduced. Compared with the pure adhesive, the flame retardant epoxy adhesive maintained outstanding adhesion performance because of the good compatibility between the composite flame retardant additives and the toughened ER adhesive. Cone calorimetry tests indicated that the release of heat and smoke were obviously declined with the incorporation of the composite flame retardant system in comparison to pure ER adhesive thermoset. The investigation of flame retardant mechanism revealed that the composite MFAPP/MEL/OMMT flame retardant system stimulated the generation of highly expanded, integral, and strong char layer and the formed char layer exerted superior insulation effect during combusiton. The present work provided an alternative approach to prepare flame retardant ER adhesive with the similar excellent adhesive performance.

Li, Sheng↗
DOE OSTI2025

Surviving nanoscale interfacial stability in extreme thermal expansion contrast Zn(CN) 2 -epoxy resin matrix composites

Here, we report the remarkable stability at the nanoscale matrix-filler interface in a series of overall low coefficient of thermal expansion (CTE) zinc cyanide (ZC)/epoxy resin composites. These interfaces demonstrate the stability of highly contrasting materials. These composites are designed to optimize the properties of both materials: epoxy resins are valued for their high strength, superb chemical resistance, low dielectric properties, and adhesive abilities. ZC, a model flexible framework, exhibits negative thermal expansion (NTE) behavior and compensates for the epoxy resin’s detrimentally large thermal expansion values. Filled resins minimize the native 65 ppm/°C CTE values to 19 ppm/° C over a wide temperature range while maintaining linearity, yielding composites compatible with typical metal and ceramic substrates’—commonly bonded to the resin— 0–20 ppm/° C CTE values. Additionally, with significant intrinsic differences in the materials, we use wide-angle X-ray diffraction and atomic force microscopy to elucidate thermal movement. The ZC/epoxy interface is surprisingly resilient over 1,000 cycles between -55° C and 75° C, extremes typical to aerospace applications. Further, we show that the resin viscosity remains less than 21 Pa*s at up to 30 vol% ZC, an important consideration for workability. We also discuss settling distribution, glass transition temperature, flexural strength, and longevity. All results point favorably towards practical implementation in low thermal expansion application needs: filling the gap in component design.

42 ENGINEERING↗
DOE OSTI2020

Test Plan to Investigate the Optimal Cure Schedule of an Epoxy Resin for Its Application as an Adhesive in Optocouplers

Epoxy resins are polymeric materials that are known for their versatility, low cost, and strong thermal and mechanical properties. They can be used as coatings, adhesives, automotive primers, and have become staples in electronics, aerospace composites and semiconductor encapsulates. Recently, LANL has experienced a decline in the quality of a specialized electronic device, called an optocoupler, which is normally acquired from commercial suppliers. Because of this, a group at LANL is exploring the feasibility of in-house manufacturing of an optocoupler that is better suited for their application. The current prototype has resulted in adhesive failure after being exposed to several thermal cycles. There is a need to investigate the possible reasons for this failure, particularly how the cure schedule of the epoxy might affect its adhesive strength over time and in cycled temperatures. To assist in this investigation, a test plan has been developed involving multiple experiments using thermomechanical analysis (TMA), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Regioisomer-Specific Crystallization of Diglycidyl Ether of Bisphenol F Epoxy Resin

Diglycidyl ether of bisphenol F (DGEBF) is a common industrial epoxy resin, desired for its possible replacement of the bisphenol A (BPA) analogue DGEBA due to potential health hazards of BPA. During curing, crystallization of the DGEBF resin can cause inaccurate resin-to-hardener ratios, resulting in incomplete crosslinking; therefore, understanding the crystallization of DGEBF is important for proper industrial control of the material. Here, in this work, we utilized a combination of single-crystal x-ray diffraction, Raman spectroscopy, and 1 H-NMR to investigate the crystallization of DGEBF. We observed crystallization of two DGEBF regioisomers: ortho-ortho’-DGEBF and ortho-para’-DGEBF, and report their crystal structures. Notably, para-para’-DGEBF crystallization is not observed, indicating crystallization of this regioisomer does not occur under ambient conditions. Density functional theory calculations were performed to describe the phonon modes of the ortho-ortho’- and ortho-para’-DGEBF structures, corroborating Raman signatures for the respective isomers. Using a phonon mode analysis, we identify the presence of three specific optical vibrational modes at 631.3, 344.1, and 345.6 cm -1 that are unique to the para monomer. This work offers insights into the crystallization behavior of DGEBF resins under ambient conditions and may inform potential industrial application of this material.

Neu, Jennifer [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2024

Epoxy resin reinforced with carbonized chicken feathers: An innovative composite material with sustainable potentials

Here, this article explores a novel method for enhancing the mechanical properties of epoxy resin composites by incorporating carbonized chicken feathers as a filler material. The fabrication process involves carbonizing chicken feathers at 600°C and incorporating 5-10 wt% of the fillers into an epoxy matrix. The composites showed enhanced mechanical properties and samples containing 10 wt% filler exhibit the best properties. The performance corresponds to 49% increase in tensile strength, 16% rise in Young’s modulus, 40% improvement in flexural modulus, and 57% in flexural strength. X-ray diffraction and scanning electron microscopy with energy dispersive spectroscopy were employed to characterize the filler. This characterization provides valuable insights into the structure and chemical composition of the pulverized carbonized chicken feathers that contributed to the attained improvement in composites’ properties. Microstructural examination of the developed composite under scanning electron microscope also provides insights into matrix-filler interface and dispersion of the fillers within the composite matrix. The study not only highlights the unique combination of carbonized feathers’ inherent strength and compatibility with the epoxy matrix but also underscores the eco-friendly nature of utilizing agricultural waste. The findings suggest promising applications in industries demanding lightweight, high-strength materials, which can contribute to sustainable engineering solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High performance, rapid thermal/UV curing epoxy resin for additive manufacturing of short and continuous carbon fiber epoxy composites

An additive manufacturing resin system includes a container; a build platform in the container; a build platform drive; an additive manufacturing resin that forms an additive manufacturing resin bath; an additive manufacturing print head; a build material supply connected to the additive manufacturing print head; an infill resin in the container, wherein the infill resin is supported by the additive manufacturing resin bath; a computer controller; and an extruded material that forms the product, wherein the infill resin at least partially surrounds the extruded material that forms the product. An infill resin supply provides the infill resin into the container and a control valve is connected to the infill resin supply. An IR light sensor is connected to the control valve and operatively connected to the infill resin in the container.

Lewicki, James↗
DOE OSTI2021

Thermal and Reliability Characterization of an Epoxy Resin-Based Double-Side Cooled Power Module

Wide-Band Gap (WBG) power devices have become a promising option for high-power applications due to the superior material properties over traditional Silicon. To not limit WBG devices’ mother nature, a rugged and high-performance power device packaging solution is necessary. This study proposes a Double-Side Cooled (DSC) 1.2 kV half-bridge power module having dual epoxy resin insulated metal substrate (eIMS) for solving convectional power module challenges and providing a cost-effective solution. The thermal performance outperforms traditional Alumina (Al2O3) Direct Bonded Copper (DBC) DSC power module due to moderate thermal conductivity (10 W/mK) and thin (120 mm) epoxy resin composite dielectric working as the IMS insulation layer. This novel organic dielectric can withstand high voltage (5 kVAC @ 120 μm) and has a Glass Transition Temperature (Tg) of 300°C, which is suitable for high-power applications. In the thermal-mechanical modeling, the organic DSC power module can pass the thermal cycling test over 1,000 cycles by optimizing the mechanical properties of the encapsulant material. In conclusion, this article not only proposes a competitive organic-based power module but also a methodology of evaluation for thermal and mechanical performance.

42 ENGINEERING↗
DOE OSTI2023

Thermally Induced Structural Transitions in Epoxy Thermoset Polymer Networks and Their Spectroscopic Responses

The polymer network structure of epoxy thermosets plays a significant role in its final material properties. However, the effects of mild thermal exposure on these network structures are poorly studied. In this work, wide-angle X-ray scattering was used to investigate the polymer network structure of two epoxy thermosets: homopolymerized bisphenol A (BPA) epoxy resin and BPA epoxy resin cured with a polyether amine hardener (BPA/T-403). Using density functional theory and wide-angle X-ray scattering, insights into the polymer network structure were obtained. Diffraction features were determined to originate from hardener-to-hardener molecular distance, perpendicular π–π stacking of aromatic p-phenylene rings, and the average carbon–carbon distance in the polymer. Thermal exposure was found to permanently alter these structural features for both thermosets, with an increase in the π–π stacking distance. Homopolymerized BPA had an additional decrease in the hardener-to-hardener distance. These structural alterations were found to be detectable using Fourier transform infrared spectroscopy and Raman spectroscopy, with changes in the hardener-to-hardener distance having the largest variations in the resulting spectra specifically at the aromatic and ether frequencies.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Anticorrosive epoxy coatings from direct epoxidation of bioethanol fractionated lignin

The development of lignin-based anticorrosive epoxy coatings for steel protection is beneficial for both alleviating the fossil resource depletion and value-added utilization of lignin but remains a challenge due to the inherent heterogeneous structure of lignin. Here, in this study, we selectively extract the low molecular weight (MW) fraction of a crop residue-derived enzymatic hydrolysis lignin (EHL) through a bioethanol fractionation process and prepare epoxy resin by direct epoxidation of the bioethanol fractionated lignin (BFL). The coatings are then fabricated using 20–100 wt% of BFL-based epoxy resin (LEp) as the commercial epoxy resin substitute. The low MW and high p-hydroxyphenyl content of the BFL offer high solubility and good workability for BFL and LEp during epoxidation and coating production, respectively. Lignin-based coatings with 20–40 wt% LEp exhibit good adhesion property (5B) and superior corrosion resistance, compared to the commercial epoxy coating. Although coating with high LEp concentrations (i.e., 60–100 wt%) resulted in decreased adhesion strength, the coating with 100 wt% LEp still displayed corrosion protection performance comparable to that of the commercial epoxy coating. Overall, this study provides a simple and effective approach to converting lignin to epoxy resins for a wide variety of surface coating applications.

09 BIOMASS FUELS↗