Search NASA⌕ Search

SEARCH · Search NASA

Results for “Experiment Optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Optimal experiment design for identification of large space structures

The optimal experiment design for on-orbit identification of modal frequency and damping parameters in large flexible space structures is discussed. The main result is a separation principle for D-optimal design which states that under certain conditions the sensor placement problem is decoupled from the input design problem. This decoupling effect significantly simplifies the overall optimal experiment design determination for large MIMO structural systems with many unknown modal parameters. The error from using the uncoupled design is estimated in terms of the inherent damping of the structure. A numerical example is given, demonstrating the usefulness of the simplified criteria in determining optimal designs for on-orbit Space Station identification experiments.

Bayard, D. S.↗
NASA NTRS1993

Optimism Experiment and Development of Space-qualified Seismometers in France

The OPTIMISM experiment will put two magnetometers and two seismometers on the Martian floor in 1995, within the framework of the Mars '94 mission. The seismometers are put within the two small surface stations. The seismometer sensitivity will be better than 10 exp -9 g at 1 Hz, 2 orders of magnitude higher than the Viking seismometer sensitivity. A priori waveform modeling for seismic signals on Mars shows that it will be sufficient to detect quakes with a seismic moment greater than 10 exp 15 Nm everywhere on Mars. Such events, according to the hypothesis of a thermoelastic cooling of the Martian lithosphere, are expected to occur at a rate close to one per week and may therefore be observed within the l-year lifetime of the experiment. Other aspects of the experiment are discussed.

Lognonne, P.↗
NASA NTRS1991

Inverse problems and optimal experiment design in unsteady heat transfer processes identification

Experimental-computational methods for estimating characteristics of unsteady heat transfer processes are analyzed. The methods are based on the principles of distributed parameter system identification. The theoretical basis of such methods is the numerical solution of nonlinear ill-posed inverse heat transfer problems and optimal experiment design problems. Numerical techniques for solving problems are briefly reviewed. The results of the practical application of identification methods are demonstrated when estimating effective thermophysical characteristics of composite materials and thermal contact resistance in two-layer systems.

Artyukhin, Eugene A.↗
NASA NTRS1988

Optimal experiment design for on-orbit identification

An optimal on-orbit experiment is designed to extract the most information from an on-orbit test, subject to the constraints of the testing environment. However, simply jumping in and optimizing standard measures of information with respect to the experiment design can cause severe problems if attention is not paid to the specific needs and properties of the problem at hand. The actual criteria to be optimized depends on (among other things) the particular ID algorithm and parametrization being used. Two parametric techniques are the focus of this presentation: recursive prediction error method (RPEM) and maximum likelihood estimation (MLE).

Bayard, David S.↗
NASA NTRS2003

Analysis of Photothermal Characterization of Layered Materials: Design of Optimal Experiments

In this paper numerical calculations are presented for the steady-periodic temperature in layered materials and functionally-graded materials to simulate photothermal methods for the measurement of thermal properties. No laboratory experiments were performed. The temperature is found from a new Green s function formulation which is particularly well-suited to machine calculation. The simulation method is verified by comparison with literature data for a layered material. The method is applied to a class of two-component functionally-graded materials and results for temperature and sensitivity coefficients are presented. An optimality criterion, based on the sensitivity coefficients, is used for choosing what experimental conditions will be needed for photothermal measurements to determine the spatial distribution of thermal properties. This method for optimal experiment design is completely general and may be applied to any photothermal technique and to any functionally-graded material.

Cole, Kevin D.↗
NASA NTRS2003

Optimal Experiment Design for Thermal Characterization of Functionally Graded Materials

The purpose of the project was to investigate methods to accurately verify that designed , materials meet thermal specifications. The project involved heat transfer calculations and optimization studies, and no laboratory experiments were performed. One part of the research involved study of materials in which conduction heat transfer predominates. Results include techniques to choose among several experimental designs, and protocols for determining the optimum experimental conditions for determination of thermal properties. Metal foam materials were also studied in which both conduction and radiation heat transfer are present. Results of this work include procedures to optimize the design of experiments to accurately measure both conductive and radiative thermal properties. Detailed results in the form of three journal papers have been appended to this report.

Cole, Kevin D.↗
NASA NTRSDate not supplied

Hardware-Efficient Quantum Optimization Layered Algorithms and Experiments

Quantum optimization algorithms, such as QAOA, that implement parametrized stochastic optimization solvers attempt to identify low-energy solutions of Ising systems by exploiting available quantum effects in noisy-intermediate scale machines. Engineering a well-performing parametrized quantum optimization circuit is indeed an exercise in balancing the trade-off between expressivity and implementation complexity. We show that, for MaxCut QAOA circuits defined on native hardware topology (Rigetti’s Aspen Quantum Processors), error-mitigation techniques recover simulated features of the noiseless theory. Moreover, we explore a design space for QAOA-like ansatze that perform well in theory as well as in hardware for fully-connected problems. We also discuss how efficient coherence and entanglement detection methods that could be coupled with quantum optimization experiments require only linear overhead in benchmarking time.

quantum computing↗
NASA NTRS1999

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

The Multidisciplinary Optimization (MDO) Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. An optimization framework call improve the design process while reducing time and costs. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. Since the release of version 4.0, the MDO Branch has gained experience with the iSIGHT framework developed by Engineous Software, Inc. This paper describes experiences with four aerospace applications: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. All applications have been successfully tested using the iSIGHT framework, except for the aerospike nozzle problem, which is in progress. Brief overviews of each problem are provided. The problem descriptions include the number and type of disciplinary codes, as well as all estimate of the multidisciplinary analysis execution time. In addition, the optimization methods, objective functions, design variables, and design constraints are described for each problem. Discussions on the experience gained and lessons learned are provided for each problem. These discussions include the advantages and disadvantages of using the iSIGHT framework for each case as well as the ease of use of various advanced features. Potential areas of improvement are identified.

Padula, S. L.↗
NASA NTRS1999

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

The Multidisciplinary Optimization (MDO) Branch at NASA Langley is investigating frameworks for supporting multidisciplinary analysis and optimization research. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. This year, the MDO Branch has gained experience with the iSIGHT framework. This paper describes experiences with four aerospace applications, including: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. Brief overviews of each problem are provided, including the number and type of disciplinary codes and computation time estimates. In addition, the optimization methods, objective functions, design variables, and constraints are described for each problem. For each case, discussions on the advantages and disadvantages of using the iSIGHT framework are provided as well as notes on the ease of use of various advanced features and suggestions for areas of improvement.

Padula, S. L.↗
NASA NTRS1997

Numerical Optimization Using Computer Experiments

Engineering design optimization often gives rise to problems in which expensive objective functions are minimized by derivative-free methods. We propose a method for solving such problems that synthesizes ideas from the numerical optimization and computer experiment literatures. Our approach relies on kriging known function values to construct a sequence of surrogate models of the objective function that are used to guide a grid search for a minimizer. Results from numerical experiments on a standard test problem are presented.

Trosset, Michael W.↗
NASA NTRS1992

Use of Taguchi design of experiments to optimize and increase robustness of preliminary designs

The research performed this summer includes the completion of work begun last summer in support of the Air Launched Personnel Launch System parametric study, providing support on the development of the test matrices for the plume experiments in the Plume Model Investigation Team Project, and aiding in the conceptual design of a lunar habitat. After the conclusion of last years Summer Program, the Systems Definition Branch continued with the Air Launched Personnel Launch System (ALPLS) study by running three experiments defined by L27 Orthogonal Arrays. Although the data was evaluated during the academic year, the analysis of variance and the final project review were completed this summer. The Plume Model Investigation Team (PLUMMIT) was formed by the Engineering Directorate to develop a consensus position on plume impingement loads and to validate plume flowfield models. In order to obtain a large number of individual correlated data sets for model validation, a series of plume experiments was planned. A preliminary 'full factorial' test matrix indicated that 73,024 jet firings would be necessary to obtain all of the information requested. As this was approximately 100 times more firings than the scheduled use of Vacuum Chamber A would permit, considerable effort was needed to reduce the test matrix and optimize it with respect to the specific objectives of the program. Part of the First Lunar Outpost Project deals with Lunar Habitat. Requirements for the habitat include radiation protection, a safe haven for occasional solar flare storms, an airlock module as well as consumables to support 34 extra vehicular activities during a 45 day mission. The objective for the proposed work was to collaborate with the Habitat Team on the development and reusability of the Logistics Modules.

Carrasco, Hector R.↗
NASA NTRS1991

Experiences with optimizing airfoil shapes for maximum lift over drag

The goal was to find airfoil shapes which maximize the ratio of lift over drag for given flow conditions. For a fixed Mach number, Reynolds number, and angle of attack, the lift and drag depend only on the airfoil shape. This then becomes a problem in optimization: find the shape which leads to a maximum value of lift over drag. The optimization was carried out using a self contained computer code for finding the minimum of a function subject to constraints. To find the lift and drag for each airfoil shape, a flow solution has to be obtained. This was done using a two dimensional Navier-Stokes code.

Doria, Michael L.↗
NASA NTRS1993

The cost of model reference adaptive control - Analysis, experiments, and optimization

In this paper the performance of Model Reference Adaptive Control (MRAC) is studied in numerical simulations and verified experimentally with the objective of understanding how differences between the plant and the reference model affect the control effort. MRAC is applied analytically and experimentally to a single degree of freedom system and analytically to a MIMO system with controlled differences between the model and the plant. It is shown that the control effort is sensitive to differences between the plant and the reference model. The effects of increased damping in the reference model are considered, and it is shown that requiring the controller to provide increased damping actually decreases the required control effort when differences between the plant and reference model exist. This result is useful because one of the first attempts to counteract the increased control effort due to differences between the plant and reference model might be to require less damping, however, this would actually increase the control effort. Optimization of weighting matrices is shown to help reduce the increase in required control effort. However, it was found that eventually the optimization resulted in a design that required an extremely high sampling rate for successful realization.

Messer, R. S.↗
NASA NTRS2003

Thermal Characterization of Functionally Graded Materials: Design of Optimum Experiments

This paper is a study of optimal experiment design applied to the measure of thermal properties in functionally graded materials. As a first step, a material with linearly-varying thermal properties is analyzed, and several different tran- sient experimental designs are discussed. An optimality criterion, based on sen- sitivity coefficients, is used to identify the best experimental design. Simulated experimental results are analyzed to verify that the identified best experiment design has the smallest errors in the estimated parameters. This procedure is general and can be applied to design of experiments for a variety of materials.

Cole, Kevin D.↗
NASA NTRS1989

Optimal trajectories for the aeroassisted flight experiment

The optimal trajectories of the aeroassisted flight experiment (AFE) spacecraft are analyzed in a three-dimensional space using the full system of six ODEs describing the atmospheric pass. The optimal trajectories are computed for two possible transfers: indirect ascent to a 178 NM perigee via a 197 NM apogee and direct ascent to a 178 NM apogee. For each transfer, two cases are investigated: (1) the bank angle is continuously variable, and (2) the trajectory is divided into segments along which the bank angle is constant. It is shown that the optimal trajectories for both cases coalesce into a two subarc trajectory, with the bank angle constant in each subarc. It is also shown that, during the atmospheric pass, the peak values of the changes of the orbital inclination and the longitude of the ascending node are nearly zero.

Miele, A.↗
NASA NTRS2021

Optimal Experimental Design With Fast Neural Network Surrogate Models

Designing optimal experiments minimizes the uncertainty of results and maximizes the efficient use of resources. Herein, machine learning surrogate models and the approximate coordinate exchange (ACE) algorithm are used to determine optimum experimental designs over large or arbitrarily restrictive design spaces. Optimal experimental design is particularly salient in materials science where experiments are expensive and material properties must often be inferred indirectly. The proposed framework is demonstrated by finding optimal experiments with which the hidden constituent properties of composite materials can be most efficiently inferred from observable experimental outcomes. The optimum experimental design is given by an information-theoretic criteria, which maximizes the conditional mutual information between the hidden properties and the expected experimental outcomes. To perform tractable optimization a neural network is trained as a surrogate model to mimic a physics based simulation, which can calculate the expected experimental outcome based on a candidate experimental design and sampled constituent properties. The ACE algorithm is used to optimize over large design spaces with many tests and controlled parameters where an exhaustive search would be intractable even with the surrogate model. Using this approach, optimal experimental designs that are consistent with those produced by heuristic knowledge and established best practices are found; then optimal designs in larger design spaces where heuristic knowledge is unavailable are examined.

machine learning↗