Search NASA⌕ Search

SEARCH · Search NASA

Results for “FACS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The Fuel Accident Condition Simulator (FACS) furnace system for high temperature performance testing of VHTR fuel

The AGR-1 irradiation of TRISO-coated particle fuel specimens was recently completed and represents the most successful such irradiation in US history, reaching peak burnups of greater than 19% FIMA with zero failures out of 300,000 particles. An extensive post-irradiation examination (PIE) campaign will be conducted on the AGR-1 fuel in order to characterize the irradiated fuel properties, assess the in-pile fuel performance in terms of coating integrity and fission metals release, and determine the fission product retention behavior during high temperature safety testing. A new furnace system has been designed, built, and tested to perform high temperature accident tests. The Fuel Accident Condition Simulator furnace system is designed to heat fuel specimens at temperatures up to 2000 degrees C in helium while monitoring the release of volatile fission metals (e.g. Cs, Ag, Sr, and Eu), iodine, and fission gases (Kr, Xe). Fission gases released from the fuel to the sweep gas are monitored in real time using dual cryogenic traps fitted with high purity germanium detectors. Condensable fission products are collected on a plate attached to a water-cooled cold finger that can be exchanged periodically without interrupting the test. Analysis of fission products on the condensation plates involves dry gamma counting followed by chemical analysis of selected isotopes. This paper will describe design and operational details of the Fuel Accident Condition Simulator furnace system and the associated fission gas monitoring system, as well as preliminary system calibration results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Flow Accelerated Erosion-Corrosion (FAC) considerations for secondary side piping in the AP1000{sup R} nuclear power plant design

The issue of Flow Accelerated Erosion-Corrosion (FAC) in power plant piping is a known phenomenon that has resulted in material replacements and plant accidents in operating power plants. Therefore, it is important for FAC resistance to be considered in the design of new nuclear power plants. This paper describes the design considerations related to FAC that were used to develop a safe and robust AP1000{sup R} plant secondary side piping design. The primary FAC influencing factors include: - Fluid Temperature - Pipe Geometry/layout - Fluid Chemistry - Fluid Velocity - Pipe Material Composition - Moisture Content (in steam lines) Due to the unknowns related to the relative impact of the influencing factors and the complexities of the interactions between these factors, it is difficult to accurately predict the expected wear rate in a given piping segment in a new plant. This paper provides: - a description of FAC and the factors that influence the FAC degradation rate, - an assessment of the level of FAC resistance of AP1000{sup R} secondary side system piping, - an explanation of options to increase FAC resistance and associated benefits/cost, - discussion of development of a tool for predicting FAC degradation rate in new nuclear power plants. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Spectroscopic Characterization of Aqua [ fac -Tc(CO) 3 ] + Complexes at High Ionic Strength

Understanding fundamental Tc chemistry is important to both the remediation of nuclear waste and the reprocessing of nuclear fuel; however, current knowledge of the electronic structure and spectral signatures of low-valent Tc compounds significantly lags behind the remainder of the d-block elements. In particular, identification and treatment of Tc speciation in legacy nuclear waste is challenging due to the lack of reference data especially for Tc compounds in the less common oxidation states (I–VI). In an effort to establish a spectroscopic library corresponding to the relevant conditions of extremely high ionic strength typical for the legacy nuclear waste, compounds with the general formula of [ fac -Tc(CO) 3 (OH 2 ) 3– n (OH) n ] 1– n (where n = 0–3) were examined by a range of spectroscopic techniques including 99 Tc/ 13 C NMR, IR, XPS, and XAS. In the series of monomeric aqua species, stepwise hydrolysis results in the increase of the Tc metal center electron density and corresponding progressive decrease of the Tc–C bond distances, Tc electron binding energies, and carbonyl stretching frequencies in the order [ fac -Tc(CO) 3 (OH 2 ) 3 ] > [ fac -Tc(CO) 3 (OH 2 ) 2 (OH)] > [ fac -Tc(CO) 3 (OH 2 )(OH) 2 ] – . These results correlate with established trends of the 99 Tc upfield chemical shift and carbonyl 13 C downfield chemical shift. The lone exception is [ fac -Tc(CO) 3 (OH)] 4 which exhibits a comparatively low electron density at the metal center attributed to the μ 3 -bridging nature of the –OH ligands causing less σ-donation and no π-donation. As a result, this work also reports the first observations of these compounds by XPS and [ fac -Tc(CO) 3 Cl 3 ] 2– by XAS. The unique and distinguishable spectral features of the aqua [ fac -Tc(CO) 3 ] + complexes lay the foundation for their identification in the complex aqueous matrixes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isothiocyanate-Functionalized Bifunctional Chelates and fac -[M I (CO) 3 ] + (M = Re, 99m Tc) Complexes for Targeting uPAR in Prostate Cancer

Developing new strategies to rapidly incorporate the fac-[MI(CO) 3 ] + . (M = Re, 99m Tc) core into biological targeting vectors in radiopharmaceuticals continues to expand as molecules become more complex and as efforts to minimize nonspecific binding increase. This work examines a novel isothiocyanate-functionalized bifunctional chelate based on 2,2'-dipicolylamine (DPA) specifically designed for complexing the fac-[MI(CO) 3 ] + . core. Two strategies (postlabeling and prelabeling) were explored using the isothiocyanate-functionalized DPA to determine the effectiveness of assembly on the overall yield and purity of the complex with amine containing biomolecules. A model amino acid (lysine) examined (1) amine conjugation of isothiocyanate-functionalized DPA followed by complexation with fac-[MI(CO) 3 ] + . (postlabeling) and (2) complexation of fac-[MI(CO) 3 ] + . with isothiocyanate-functionalized DPA followed by amine conjugation (prelabeling). Conducted with stable Re and radioactive 99m Tc analogs, both strategies formed the product in good to excellent yields under macroscopic and radiotracer concentrations. A synthetic peptide (AE105) which targets an emerging biomarker in CaP prognosis, urokinase-type plasminogen activator receptor (uPAR), was also explored using the isothiocyanate-functionalized DPA strategy. In vitro PC-3 (uPAR+) cell uptake assays with the 99m Tc-labeled peptide (8a) showed 4.2 ± 0.5% uptake at 4 h. In a murine model bearing PC-3 tumor xenografts, in vivo biodistribution of 8a led to favorable tumor uptake (3.7 ± 0.7% ID/g) at 4 h p.i. with relatively low accumulation (<2% ID/g) in normal organs not associated with normal peptide excretion. These results illustrate the promise of the isothiocyanate-functionalized approach for labeling amine containing biological targeting vectors with fac-[MI(CO) 3 ] + .

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Intersystem-crossing and phosphorescence rates in fac-Ir{sup III}(ppy){sub 3}: A theoretical study involving multi-reference configuration interaction wavefunctions

We have employed combined density functional theory and multi-reference configuration interaction methods including spin–orbit coupling (SOC) effects to investigate the photophysics of the green phosphorescent emitter fac-tris-(2-phenylpyridine)iridium (fac-Ir(ppy){sub 3}). A critical evaluation of our quantum chemical approaches shows that a perturbational treatment of SOC is the method of choice for computing the UV/Vis spectrum of this heavy transition metal complex while multi-reference spin–orbit configuration interaction is preferable for calculating the phosphorescence rates. The particular choice of the spin–orbit interaction operator is found to be of minor importance. Intersystem crossing (ISC) rates have been determined by Fourier transformation of the time correlation function of the transition including Dushinsky rotations. In the electronic ground state, fac-Ir(ppy){sub 3} is C{sub 3} symmetric. The calculated UV/Vis spectrum is in excellent agreement with experiment. The effect of SOC is particularly pronounced for the metal-to-ligand charge transfer (MLCT) band in the visible region of the absorption spectrum which does not only extend its spectral onset towards longer wavelengths but also experiences a blue shift of its maximum. Pseudo-Jahn-Teller interaction leads to asymmetric coordinate displacements in the lowest MLCT states. Substantial electronic SOC and a small energy gap make ISC an ultrafast process in fac-Ir(ppy){sub 3}. For the S{sub 1}↝T{sub 1} non-radiative transition, we compute a rate constant of k{sub ISC} = 6.9 × 10{sup 12} s{sup −1} which exceeds the rate constant of radiative decay to the electronic ground state by more than six orders of magnitude, in agreement with the experimental observation of a subpicosecond ISC process and a triplet quantum yield close to unity. As a consequence of the geometric distortion in the T{sub 1} state, the T{sub 1} → S{sub 0} transition densities are localized on one of the phenylpyridyl moieties. In our best quantum chemical model, we obtain phosphorescence decay times of 264 μs, 13 μs, and 0.9 μs, respectively, for the T{sub 1,I}, T{sub 1,II}, and T{sub 1,III} fine-structure levels in dichloromethane (DCM) solution. In addition to reproducing the correct orders of magnitude for the individual phosphorescence emission probabilities, our theoretical study gives insight into the underlying mechanisms. In terms of intensity borrowing from spin-allowed transitions, the low emission probability of the T{sub 1,I} substate is caused by the mutual cancellation of contributions from several singlet states to the total transition dipole moment. Their contributions do not cancel but add up in case of the much faster T{sub 1,III} → S{sub 0} emission while the T{sub 1,II} → S{sub 0} emission is dominated by intensity borrowing from a single spin-allowed process, i.e., the S{sub 2} → S{sub 0} transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BONCAT-FACS-Seq reveals the active fraction of a biocrust community undergoing a wet-up event

Determining which microorganisms are active within soil communities remains a major technical endeavor in microbial ecology research. One promising method to accomplish this is coupling bioorthogonal non-canonical amino acid tagging (BONCAT) with fluorescence activated cell sorting (FACS) which sorts cells based on whether or not they are producing new proteins. Combined with shotgun metagenomic sequencing (Seq), we apply this method to profile the diversity and potential functional capabilities of both active and inactive microorganisms in a biocrust community after being resuscitated by a simulated rain event. We find that BONCAT-FACS-Seq is capable of discerning the pools of active and inactive microorganisms, especially within hours of applying the BONCAT probe. The active and inactive components of the biocrust community differed in species richness and composition at both 4 and 21 h after the wetting event. The active fraction of the biocrust community is marked by taxa commonly observed in other biocrust communities, many of which play important roles in species interactions and nutrient transformations. Among these, 11 families within the Firmicutes are enriched in the active fraction, supporting previous reports indicating that the Firmicutes are key early responders to biocrust wetting. We highlight the apparent inactivity of many Actinobacteria and Proteobacteria through 21 h after wetting, and note that members of the Chitinophagaceae, enriched in the active fraction, may play important ecological roles following wetting. Based on the enrichment of COGs in the active fraction, predation by phage and other bacterial members, as well as scavenging and recycling of labile nutrients, appear to be important ecological processes soon after wetting. To our knowledge, this is the first time BONCAT-FACS-Seq has been applied to biocrust samples, and therefore we discuss the potential advantages and shortcomings of coupling metagenomics to BONCAT to intact soil communities such as biocrust. In all, by pairing BONCAT-FACS and metagenomics, we are capable of highlighting the taxa and potential functions that typifies the microbes actively responding to a rain event.

59 BASIC BIOLOGICAL SCIENCES↗

Evaluation of LINE-1 mobility in neuroblastoma cells by in vitro retrotransposition reporter assay: FACS analysis can detect only the tip of the iceberg of the inserted L1 elements

Long Interspersed Nuclear Elements (L1) are retroelements generally repressed in most differentiated somatic cells. Their activity has been observed in some undifferentiated and tumour cells and could be involved in tumour onset and progression. Growing evidences show that the L1 activation can occur in neuronal precursor cells during differentiation process. Neuroblastoma is a tumour originating from neuronal precursor cells, and, although the molecular basis of its progression is still poorly understood, the implication of L1 activation has not yet been investigated. In this study L1 mobility in neuroblastoma BE(2)C cells was assessed using the in vitro retrotransposition assay consisting in an episomal EGFP-tagged L1{sub RP} element, whose mobility can be evaluated by cytofluorimetric analysis (FACS) of EGFP expression. FACS results have shown a low retrotransposition activity. To detect L1{sub RP} integrated in transcriptionally repressed genomic sites, both a cell treatment with a stimulator of reporter gene promoter, and a quantitative Real-Time PCR analysis were performed. A retrotransposition activity ten and one thousand times that of FACS was found, respectively. These results point out that the real rate of L1 retrotransposition events in tumour cells might be considerably higher than that reported so far by evaluating only the reporter gene expression.

60 APPLIED LIFE SCIENCES↗

Allyl Ligand Reactivity in Tantalum(V) Compounds: Experimental and Computational Evidence for Allyl Transfer to the Formamidinate Ligand in fac-Ta(NMe2)3( 1-allyl)[iPrNC(H)NHiPr] via a Metallo-Claisen Rearrangement

Treatment of TaCl(NMe{sub 2})4 (1) with allyl MgCl furnishes the allyl-substituted compound Ta(NMe{sub 2})4({eta}{sup 1}-allyl) (2) in moderate yield. The X-ray structure of 2 reveals a trigonal-bipyramidal geometry at the tantalum center with an equatorially situated {eta}{sup 1}-allyl moiety. VT {sup 1}H NMR measurements confirm that the molecule is fluxional in solution over the temperature range 298-193 K, and DFT calculations indicate that the time-averaged environment exhibited by the allyl moiety in fluid solution derives from a rapid {eta}{sup 1}-to-{eta}{sup 3} equilibration, with Ta(NMe{sub 2})4({eta}{sup 3}-allyl) serving as the transition state for this process. 1 reacts rapidly with the formamidine {sup i}PrNC(H)N{sup i}Pr to yield fac-TaCl(NMe{sub 2}){sub 3}[{sup i}PrNC(H)N{sup i}Pr] (5) and Me{sub 2}NH, and the tantalum product has been characterized by NMR spectroscopy and X-ray diffraction analysis. The five-coordinate compound Ta(NMe{sub 2}){sub 3}[{sup i}PrNCH(allyl)N{sup i}Pr] (7), whose origin is traced to the putative octahedral species fac-Ta(NMe{sub 2}){sub 3}({eta}{sup 1}-allyl)[{sup i}PrNC(H)N{sup i}Pr] (6), has been obtained from the reaction of 2 with {sup i}PrNC(H)N{sup i}Pr; 7 may also be prepared from the reaction of 5 with allylMgCl. The rearrangement of the allyl moiety in fac-Ta(NMe{sub 2}){sub 3}({eta}{sup 1}-allyl)[{sup i}PrNC(H)N{sup i}Pr] to the formamidinate carbon atom in 7 has been investigated by DFT calculations. Here the DFT calculations have provided crucial insight into the reaction mechanism and the composition of those transient species that do not lend themselves to direct spectroscopic observation. The computed barrier for this metallo-Claisen rearrangement is sensitive to the nature of the density functional employed, and the barrier computed using the meta-GGA TPSS functional provides the best agreement with the experimental conditions. The related alkenyl derivatives Ta(NMe{sub 2})4({eta}{sup 1}-3-butenyl) (3) and Ta(NMe{sub 2}){sub 3}({eta}{sup 1}-3-butenyl)[{sup i}PrNC(H)N{sup i}Pr] (8) have been synthesized, and their reactivity is contrasted with the corresponding allyl-substituted analogues.

36 MATERIALS SCIENCE↗

New rhenium(I) compounds containing the donor-acceptor diphosphine ligands 2-(ferrocenylidene)-4,5-bis(diphenylphosphino)4-cyclopenten-1,3-dione (fbpcd) and 2-(3-ferrocenylprop-2-ynylidene)-4,5-bis(diphenylphosphino)4-cyclopenten-1,3-dione (fpbpcd): Electrochemical behavior, MO properties, and X-ray diffraction structure of fac-BrRe(CO)(3)(fpbpcd)

Displacement of the labile THF molecules in BrRe(CO){sub 3}(THF){sub 2} (1) by the diphosphine ligands 2-(ferrocenylidene)-4,5-bis(diphenylphosphino)4-cyclopenten-1,3-dione (fbpcd) and 2-(3-ferrocenylprop-2-ynylidene)-4,5-bis(diphenylphosphino)4-cyclopenten- 1,3-dione (fpbpcd) yields the mononuclear compounds fac-BrRe(CO){sub 3}(fbpcd) (2) and fac-BrRe(CO){sub 3}(fpbpcd) (3), respectively. The new ligand fpbpcd ligand has been synthesized from 3-ferrocenylpropynal and the parent diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) through a Knoevenagel condensation. 2 and 3 have been isolated and fully characterized by IR and NMR spectroscopies ({sup 1}H and {sup 31}P), ESI mass spectrometry, and X-ray diffraction analysis in the case of 3. The electrochemical properties of compounds 2 and 3 have been examined by cyclic voltammetry, and the nature of the HOMO and LUMO levels in these systems has been confirmed by MO calculations at the extended Hueckel level. The redox and MO data are discussed relative to the redox and orbital properties of related functionalized diphosphines based on the bpcd platform.

36 MATERIALS SCIENCE↗

Probing the active fraction of soil microbiomes using BONCAT-FACS

The ability to link soil microbial diversity to soil processes requires technologies that differentiate active microbes from extracellular DNA and dormant cells. Here, we use BONCAT (bioorthogonal non-canonical amino acid tagging) to measure translationally active cells in soils. We compare the active population of two soil depths from Oak Ridge (Tennessee, USA) and find that a maximum of 25-70% of the extractable cells are active. Analysis of 16S rRNA sequences from BONCAT-positive cells recovered by fluorescence-activated cell sorting (FACS) reveals that the phylogenetic composition of the active fraction is distinct from the total population of extractable cells. Some members of the community are found to be active at both depths independently of their abundance rank, suggesting that the incubation conditions favor the activity of similar organisms. We conclude that BONCAT-FACS is effective for interrogating the active fraction of soil microbiomes in situ and provides a new approach for uncovering the links between soil processes and specific microbial groups.

59 BASIC BIOLOGICAL SCIENCES↗

Study of Oak Ridge soils using BONCAT-FACS-Seq reveals that a large fraction of the soil microbiome is active

The ability to link soil microbial diversity to soil processes requires technologies that differentiate active subpopulations of microbes from so-called relic DNA and dormant cells. Measures of microbial activity based on various techniques including DNA labelling have suggested that most cells in soils are inactive, a fact that has been difficult to reconcile with observed high levels of bulk soil activities. We hypothesized that measures of in situ DNA synthesis may be missing the soil microbes that are metabolically active but not replicating, and we therefore applied BONCAT (Bioorthogonal Non Canonical Amino Acid Tagging) i.e. a proxy for activity that does not rely on cell division, to measure translationally active cells in soils. We compared the active population of two soil depths from Oak Ridge (TN) incubated under the same conditions for up to seven days. Depending on the soil, a maximum of 25 – 70% of the cells were active, accounting for 3-4 million cells per gram of soil type, which is an order of magnitude higher than previous estimates. The BONCAT positive cell fraction was recovered by fluorescence activated cell sorting (FACS) and identified by 16S rDNA amplicon sequencing. The diversity of the active fraction was a selected subset of the bulk soil community. Excitingly, some of the same members of the community were recruited at both depths independently from their abundance rank. On average, 86% of sequence reads recovered from the active community shared >97% sequence similarity with cultured isolates from the field site. Our observations are in line with a recent report that, of the few taxa that are both abundant and ubiquitous in soil, 45% are also cultured – and indeed some of these ubiquitous microorganisms were found to be translationally active. The use of BONCAT on soil microbiomes provides evidence that a large portion of the soil microbes can be active simultaneously. We conclude that BONCAT coupled to FACS and sequencing is effective for interrogating the active fraction of soil microbiomes in situ and provides new perspectives to link metabolic capacity to overall soil ecological traits and processes.

58 GEOSCIENCES↗

Quantitative analysis of mammalian translation initiation sites by FACS -seq

An approach combining fluorescence-activated cell sorting and high-throughput DNA sequencing (FACS-seq) was employed to determine the efficiency of start codon recognition for all possible translation initiation sites (TIS) utilizing AUG start codons. Using FACS-seq, we measured translation from a genetic reporter library representing all 65,536 possible TIS sequences spanning the -6 to +5 positions. We found that the motif RYMRMVAUGGC enhanced start codon recognition and translation efficiency. However, dinucleotide interactions, which cannot be conveyed by a single motif, were also important for modeling TIS efficiency. Our dataset combined with modeling allowed us to predict genome-wide translation initiation efficiency for all mRNA transcripts. Additionally, we screened somatic TIS mutations associated with tumorigenesis to identify candidate driver mutations consistent with known tumor expression patterns. Finally, we implemented a quantitative leaky scanning model to predict alternative initiation sites that produce truncated protein isoforms and compared predictions with ribosome footprint profiling data. The comprehensive analysis of the TIS sequence space enables quantitative predictions of translation initiation based on genome sequence.

59 BASIC BIOLOGICAL SCIENCES↗

Fuel Accident Condition Simulator (FACS) Furnace for Post-Irradiation Heating Tests of VHTR Fuel Compacts

Abstract –Fuel irradiation testing and post-irradiation examination are currently in progress as part of the Next Generation Nuclear Plant Fuels Development and Qualification Program. The PIE campaign will include extensive accident testing of irradiated very high temperature reactor fuel compacts to verify fission product retention characteristics at high temperatures. This work will be carried out at both the Idaho National Laboratory (INL) and the Oak Ridge National Laboratory, beginning with accident tests on irradiated fuel from the AGR-1 experiment in 2010. A new furnace system has been designed, built, and tested at INL to perform high temperature accident tests. The Fuel Accident Condition Simulator furnace system is designed to heat fuel specimens at temperatures up to 2000°C in helium while monitoring the release of volatile fission metals (e.g. Cs, Ag, Sr, Eu, and I) and fission gases (Kr, Xe). Fission gases released from the fuel to the sweep gas are monitored in real time using dual cryogenic traps fitted with high purity germanium detectors. Condensable fission products are collected on a plate attached to a water-cooled cold finger that can be exchanged periodically without interrupting the test. Analysis of fission products on the condensation plates involves dry gamma counting followed by chemical analysis of selected isotopes. This paper will describe design and operational details of the Fuel Accident Condition Simulator (FACS) furnace system, as well as preliminary system calibration results.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Syntheses, Spectroscopic Data, and X-ray Diffraction Structures of the Heterometallic RuRe Face-shared Bioctahedral (eta(6)-cymene)Ru(mu-Cl)(3)Re(CO)(3) and MnRu2 Edge-shared Trioctahedral [fac-ClRu(CO)(3)](2)(mu-Cl)(4)Mn(H2O)(2) Complexes

Thermolysis of the diruthenium compound [(eta(6)-cymene)RuCl2](2) (1) with ClRe(CO)(5) (2) leads to the formation of the new confacial bioctahedral compound (eta(6)-cymene) Ru(mu-Cl)(3)Re(CO)(3) (3) in good yields; the same product has also been isolated when a mixture of 1 and 2 is irradiated with near UV-vis light for an extended period of time. Heating 1 and ClMn(CO)(5) (4) does not furnish the corresponding manganese analogue of 3 but rather the trioctahedral halide-bridged product [fac-ClRu(CO)(3)](2)(mu-Cl)(4)Mn(H2O)(2) (5). 3 and 5 have been fully characterized in solution and their molecular structures established by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Dicationic fac -Re(bpy)(CO) 3 Cl for CO 2 Electroreduction at a Reduced Overpotential

Here, a dicationic Re bipyridine-type complex, fac-Re(6,6'-(2-((trimethylammonio)-methyl)phenyl)-2,2'-bipyridine)(CO) 3 Cl hexafluorophosphate (1 2+ ), has been synthesized and its electrochemical behavior under Ar and CO 2 has been investigated. The presence of pendent tetra-alkylammonium cations induces an anodic shift in the electrocatalytic potential for CO 2 reduction relative to structurally similar model complexes. The electrochemical mechanisms in anhydrous CH 3 CN and in the presence of weak acids (water or trifluoroethanol) have been analyzed using cyclic voltammetry assisted by infrared spectroelectrochemistry and theoretical calculations. The dication enables catalysis at a diminished potential through coulombic stabilization of the doubly reduced pentacoordinate species, its CO 2 adduct, the hydroxide anion, and the conjugate base formed during acid-assisted C-OH bond cleavage of the metallocarboxylic acid to the metallocarbonyl and H 2 O. The major reduction product is CO, but in the presence of trifluoroethanol, formate is also produced with 14% Faradaic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene-Immobilized fac -Re(bipy)(CO) 3 Cl for Syngas Generation from Carbon Dioxide

We report herein the synthesis of fac -M(4-amino-bipy)(CO) 3 X (M = Mn and X = Br or M = Re and X = Cl, with bipy = 2,2'-bipyridine), their immobilization on graphene oxide (GrO) via diazonium grafting, and the use of Re-functionalized GrO for electrocatalytic syngas production. Infrared (IR) spectroscopy, X-ray absorption fine structure (XAFS) spectroscopy, and electrocatalysis indicated successful grafting of the Re catalyst onto GrO. Re-functionalized GrO was then deposited onto a glassy carbon electrode (GCE) for CO 2 reduction. Investigation of the Re-functionalized GCE for syngas production was performed in a CO 2 -saturated acetonitrile solution with 3.1 M H 2 O as the proton source and 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF 6 ) as the supporting electrolyte. Cyclic voltammetry (CV), controlled potential electrolysis (CPE), and gas chromatography (GC) were employed to determine its CO 2 -to-CO conversion performance. The Re catalyst shows a turnover frequency (TOF) for generating CO up to 4.44 s –1 with a CO/H 2 ratio of 7:5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗