SEARCH · Search NASA
Results for “FCI”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Optimal Orbital Selection for Full Configuration Interaction (OptOrbFCI): Pursuing the Basis Set Limit under a Budget
Full configuration interaction (FCI) solvers are limited to small basis sets due to their expensive computational costs. An optimal orbital selection for FCI (OptOrbFCI) is proposed to boost the power of existing FCI solvers to pursue the basis set limit under a computational budget. The optimization problem coincides with that of the complete active space SCF method (CASSCF), while OptOrbFCI is algorithmically quite different. OptOrbFCI effectively finds an optimal rotation matrix via solving a constrained optimization problem directly to compress the orbitals of large basis sets to one with a manageable size, conducts FCI calculations only on rotated orbital sets, and produces a variational ground-state energy and its wave function. Coupled with coordinate descent full configuration interaction (CDFCI), we demonstrate the efficiency and accuracy of the method on the carbon dimer and nitrogen dimer under basis sets up to cc-pV5Z. We also benchmark the binding curve of the nitrogen dimer under the cc-pVQZ basis set with 28 selected orbitals, which provide consistently lower ground-state energies than the FCI results under the cc-pVDZ basis set. Furthermore, the dissociation energy in this case is found to be of higher accuracy.
Local probe of bulk and edge states in a fractional Chern insulator
The fractional quantum Hall effect is a key example of topological quantum many-body phenomena, arising from the interplay between strong electron correlation, topological order and time-reversal symmetry breaking. Recently, a lattice analogue of the fractional quantum Hall effect at zero magnetic field has been observed, confirming the existence of a zero-field fractional Chern insulator (FCI). Despite this, the bulk–edge correspondence—a hallmark of a FCI featuring an insulating bulk with conductive edges—has not been directly observed. In fact, this correspondence has not been visualized in any system for fractional states owing to experimental challenges. Here we report the imaging of FCI edge states in twisted MoTe 2 (t-MoTe 2 ) using microwave impedance microscopy. By tuning the carrier density, we observe the system evolving between metallic and FCI states, the latter of which exhibits insulating bulk and conductive edges, as expected from the bulk–boundary correspondence. Further analysis suggests the composite nature of the FCI edge states. We also observe the evolution of edge states across the topological phase transition as a function of interlayer electric field and reveal exciting prospects of neighbouring domains with different fractional orders. Furthermore, these findings pave the way for research into topologically protected one-dimensional interfaces between various anyonic states at zero magnetic field, such as gapped one-dimensional symmetry-protected phases with non-zero topological entanglement entropy, Halperin–Laughlin interfaces and the creation of non-abelian anyons.
Exploring Hilbert space on a budget: Novel benchmark set and performance metric for testing electronic structure methods in the regime of strong correlation
This work explores the ability of classical electronic structure methods to efficiently represent (compress) the information content of full configuration interaction (FCI) wave functions. We introduce a benchmark set of four hydrogen model systems of different dimensionalities and distinctive electronic structures: a 1D chain, a 1D ring, a 2D triangular lattice, and a 3D close-packed pyramid. To assess the ability of a computational method to produce accurate and compact wave functions, we introduce the accuracy volume, a metric that measures the number of variational parameters necessary to achieve a target energy error. Using this metric and the hydrogen models, we examine the performance of three classical deterministic methods: (i) selected configuration interaction (sCI) realized both via an a posteriori (ap-sCI) and variational selection of the most important determinants, (ii) an a posteriori singular value decomposition (SVD) of the FCI tensor (SVD-FCI), and (iii) the matrix product state representation obtained via the density matrix renormalization group (DMRG). We find that the DMRG generally gives the most efficient wave function representation for all systems, particularly in the 1D chain with a localized basis. For the 2D and 3D systems, all methods (except DMRG) perform best with a delocalized basis, and the efficiency of sCI and SVD-FCI is closer to that of DMRG. For larger analogs of the models, the DMRG consistently requires the fewest parameters but still scales exponentially in 2D and 3D systems, and the performance of SVD-FCI is essentially equivalent to that of ap-sCI.
Taming the virtual space for incremental full configuration interaction
Incremental full configuration interaction (iFCI) closely approximates the FCI limit with polynomial cost through a many-body expansion of the correlation energy, providing highly accurate total energies within a given basis set. To extend iFCI beyond previous basis set limitations, this work introduces a novel natural orbital (NO) screening approach, incremental NO full configuration interaction (iNO-FCI). By consideration of the importance of virtual orbital selection in the convergence of iFCI, iNO-FCI maximizes the consistency between orbitals selected for each correlated body. iNO-FCI employs a principle of cancellation of errors and ensures that the same set of virtual NOs is used for interdependent terms. Here, this strategy significantly reduces computational cost without compromising precision. Computational savings of up to 95% are demonstrated, allowing access to larger basis sets that were previously computationally prohibitive. iNO-FCI is herein introduced and benchmarked for several difficult test cases involving double-bond dissociation, biradical systems, conjugated π systems, and the spin gap of a Cu-based transition metal complex.
Edge-driven transition between extended quantum anomalous Hall crystal and fractional Chern insulator in rhombohedral graphene multilayers
Fractional Chern insulators (FCI) with fractionally quantized Hall conductance at fractional fillings and an extended quantum anomalous Hall (EQAH) crystal with an integer quantized Hall conductance over an extended region of doping were recently observed in pentalayer graphene. One particularly puzzling observation is the transition between the EQAH and FCI regimes, driven either by temperature or electrical current. Here, in this study, we propose a scenario to understand these transitions based on the topologically protected gapless edge modes that are present in both the FCI and EQAH phases and should be most relevant at temperature scales below the energy gap. Our consideration is based on the simple assumption that the edge velocity in FCI is smaller than that in EQAHE and thus contributes to a higher entropy. We further argue that domains with opposite fractionally quantized Hall conductance are ubiquitous in the devices due to disorder, which gives rise to a network of edge modes. The velocity of the edge modes between domains is further reduced due to edge reconstruction. The edge velocity can also be reduced by current when the occupation of the edge mode approaches the gap edge. The edge entropy therefore drives the transition from EQAH to FCI either by temperature or current at a nonzero temperature.
Optical control of integer and fractional Chern insulators
Optical control of topology, particularly in the presence of electron correlations, is an interesting topic with broad scientific and technological impact. Twisted MoTe 2 bilayer (tMoTe 2 ) is a zero-field fractional Chern insulator (FCI), exhibiting the fractionally quantized anomalous Hall effect. As the chirality of the edge states and sign of the Chern number are determined by the underlying ferromagnetic polarization, manipulation of ferromagnetism would realize control of the Chern insulator (CI)/FCI states. Here, in this work, we demonstrate control of ferromagnetic polarization, and thus the CI and FCI states, by circularly polarized optical pumping in tMoTe 2 . At low excitation power, we achieve on-demand preparation of ferromagnetic polarization by optical training, that is, electrically tuning the system from non-ferromagnetic to desirable ferromagnetic states under helicity-selective optical pumping. With increased excitation power, we further realize direct optical switching of ferromagnetic polarization at a temperature far below the Curie temperature. Both optical training and direct switching are most effective near CI and FCI states, which we attribute to a gap-enhanced valley polarization of optically pumped holes. The magnetization can be dynamically switched by modulating the helicity of optical excitation. Spatially resolved measurements further demonstrate optical writing of ferromagnetic, and thus CI (or FCI) domains. Our work realizes precise optical control of a topological quantum many-body system with potential applications in topological spintronics, quantum memories and creation of exotic edge states by programmable patterning of integer and fractionally quantized anomalous Hall domains.
Signatures of fractional charges via anyon–trions in twisted MoTe 2
Fractionalization of the electron charge e is one of the most striking phenomena arising from strong electron–electron interactions. A celebrated example is the emergence of anyons with fractional charges in fractional quantum Hall effect (FQHE) states. Recently, zero-field fractional Chern insulators (FCIs), lattice analogues of the FQHE states that form without Landau levels, have been realized. FCIs provide a unique platform to investigate anyons, yet their detection remains a challenge. Here we report the observation of anyon–trions, a new type of excitonic complex formed by binding a trion with a fractional charge in twisted MoTe 2 bilayers. Photoluminescence spectroscopy of quantum-confined excitons reveals emergent peaks that appear only within slightly doped FCI states. The new spectral features are red-shifted relative to the trions in undoped FCIs, but share the same electric field, temperature and magnetic field dependence. These observations suggest their origin as trions binding with elementary quasi-particles, that is, anyon–trions. Crucially, the ratio of binding energies between the anyon–trions in the −2/3 and −3/5 FCI states matches the expected fractional charge ratio of e/3 to e/5. This provides strong evidence for fractional charges in FCI—an essential property of anyons. Our results address a fundamental question in FCI physics and establish trion spectroscopy as a powerful probe of fractionally charged excitations, complementary to transport- and tunnelling-based approaches.
Quantum-metric-induced quantum Hall conductance inversion and reentrant transition in fractional Chern insulators
The quantum metric of single-particle wave functions in topological flat bands plays a crucial role in determining the stability of fractional Chern insulating (FCI) states. Here, we unravel that the quantum metric causes the many-body Chern number of the FCI states to deviate sharply from the expected value associated with partial filling of the single-particle topological flat band. Furthermore, the variation of the quantum metric in momentum space induces band dispersion through interactions, affecting the stability of the FCI states. This causes a reentrant transition into the Fermi liquid from the FCI phase as the interaction strength increases. Published by the American Physical Society 2024
HIGH BURNUP FUEL-COOLANT INTERACTION ANALYSIS SUPPORTING FUEL SAFETY TESTING AT IDAHO NATIONAL LABORATORY
In the near future, experiments on HBu fuel under loss-of-coolant accident (LOCA) and reactivity-initiated accident (RIA) conditions will be performed within the Transient Reactor Test Facility (TREAT) at Idaho National Laboratory (INL). These experiments will be performed using the Transient Water Irradiation System for TREAT (TWIST) experiment vehicle. To support these experiments, analysis of fuel-coolant interaction (FCI) energetics is underway. This paper discusses FCIs in the context of light water reactor (LWR) safety, differentiating between the severe accident focus of commercial reactors and experimental RIA test programs where FCIs have occurred. However, it is highlighted that as the nuclear industry aims for increased burnup limits, the FCI events observed in RIA test programs may become relevant to commercial LWR safety analysis. The paper then presents developments to the UW-FCI computer program to enable simulation of FCIs initiated by solid fuel particles dispersing into the coolant during RIAs.
Toward Full Configuration Interaction for Transition-Metal Complexes
In this work, an efficacious approximation to full configuration interaction (FCI) is adapted to calculate singlet-triplet gaps for transition-metal complexes. This strategy, incremental FCI (iFCI), uses a many-body expansion to systematically add correlation to a simple reference wave function and therefore achieves greatly reduced computational costs compared to FCI. iFCI through the 3-body expansion is demonstrated on four model transition-metal complexes involving the metals Zn, V, and Cu. Screening techniques to increase the computational efficiency of iFCI are proposed and tested, showing reduction in the number of 3-body terms by more than 90% with controlled errors. The largest complex treated by iFCI has 142 valence electrons, all of which are correlated among the full set of 444 active orbitals. Computed spin gaps approach experimental results for the four complexes, though room for improvement remains.
A Systematic, Polynomial-Cost Approach to Exact Correlation Energies (Final Technical Report)
The full configuration interaction (FCI) wave function provides the exact solution to the Schrödinger equation in a given basis set. While FCI is intractable due to exponential computational costs, the many-body expansion (or the method of increments) can reduce scaling to a low-order polynomial with system size. This project entailed advances in the incremental FCI (iFCI) approach, designed to allow iFCI to reach larger system sizes and maintain its intrinsic high accuracy. This document describes advances in solvers for iFCI, strategies to treat multiple charge and spin states, and virtual state management methods to reduce memory requirements. Overall, this project allows iFCI to correlate (for the first time) 142 valence electrons in 444 orbitals in a realistic model of a transition metal complex.
Quantum Solvers for Plane-Wave Hamiltonians: Abridging Virtual Spaces Through the Optimization of Pairwise Correlations
For many-body methods such as MCSCF and CASSCF, in which the number of one-electron orbitals is optimized and independent of the basis set used, there are no problems with using plane-wave basis sets. However, for methods currently used in quantum computing such as select configuration interaction (CI) and coupled cluster (CC) methods, it is necessary to have a virtual space that is able to capture a significant amount of electron-electron correlation in the system. The virtual orbitals in a pseudopotential plane-wave Hartree–Fock calculation, because of Coulomb repulsion, are often scattering states that interact very weakly with the filled orbitals. As a result, very little correlation energy is captured from them. The use of virtual spaces derived from the one-electron operators has also been tried, and while some correlations are captured, the amount is quite low. To overcome these limitations, we have been developing new classes of algorithms to define virtual spaces by optimizing orbitals from small pairwise CI Hamiltonians, which we term as correlation optimized virtual orbitals with the abbreviation COVOs. With these procedures, we have been able to derive virtual spaces, containing only a few orbitals, which are able to capture a significant amount of correlation. The focus in this manuscript is on using these derived basis sets to target full CI (FCI) quality results for H2 on near-term quantum computers. However, the initial results for this approach were promising. We were able to obtain good agreement with FCI/cc-pVTZ results for this system with just 4 virtual orbitals, using both FCI and quantum simulations. The quality of the results using COVOs suggests that it may be possible to use them in other many-body approaches, including coupled cluster and Møller–Plesset perturbation theories, and open up the door to many-body calculations for pseudopotential plane-wave basis set methods.
Optical 14 C Tracing for Biological and Pharmaceutical Applications Using Two-Color Cavity Ringdown Spectroscopy
Laser-based 14 C quantitation has been proposed as a more affordable, higher-throughput, table-top alternative to accelerator mass spectrometry (AMS). Here, we demonstrate the feasibility of a mid-IR 14 C detector based on two-color cavity ringdown spectroscopy (2C-CRDS) for low-level 14 C isotope tracing in biological studies. The 2C-CRDS technique quantifies the sample 14 C content by measuring the 14 CO 2 absorption signals from the combusted samples with mid-IR lasers. With 2C-CRDS, we previously demonstrated the most sensitive and accurate optical measurements of 14 CO 2 . The current detection sensitivity and quantitation accuracy of the instrument, at a few parts per quadrillion (where a quadrillion = 10 15 ) 14 C/C mole fraction, is competitive against AMS. Here, by applying the 2C-CRDS 14 C sensor to two applications relevant to 14 C-labeled biochemical analysis and pharmaceutical studies, we demonstrate sub-fCi level (where 1 fCi = 10 –15 Ci) quantitation of sample 14 C activity, with a minimum sample-size requirement of 3 mg of carbon. The current measurement throughput, ~25 min/sample, is largely limited by the sampling efficiency of the online combustion and CO 2 processing interface to the 2C-CRDS instrument. The possibility of a significantly improved measurement throughput of a few minutes per sample is suggested by the results of a flow-through 14 CO 2 sampling scheme. In conclusion, this improved measurement efficiency, combined with the relatively low cost and compact size of a 2C-CRDS sensor, could potentially revolutionize high-sensitivity 14 C tracing in biological, pharmaceutical, and clinical studies.
Improved Fast Randomized Iteration Approach to Full Configuration Interaction
In this work, we present three modifications to our recently introduced fast randomized iteration method for full configuration interaction (FCI-FRI) and investigate their effects on the method’s performance for Ne, H 2 O, and N 2 . The initiator approximation, originally developed for full configuration interaction quantum Monte Carlo, significantly reduces statistical error in FCI-FRI when few samples are used in compression operations, enabling its application to larger chemical systems. The semistochastic extension, which involves exactly preserving a fixed subset of elements in each compression, improves statistical efficiency in some cases but reduces it in others. We also developed a new approach to sampling excitations that yields consistent improvements in statistical efficiency and reductions in computational cost. We discuss possible strategies based on our findings for improving the performance of stochastic quantum chemistry methods more generally.
Reinforcement Learning Configuration Interaction
Selected configuration interaction (sCI) methods exploit the sparsity of the full configuration interaction (FCI) wave function, yielding significant computational savings and wave function compression without sacrificing the accuracy. Despite recent advances in sCI methods, the selection of important determinants remains an open problem. Furthermore, we explore the possibility of utilizing reinforcement learning approaches to solve the sCI problem. By mapping the configuration interaction problem onto a sequential decision-making process, the agent learns on-the-fly which determinants to include and which to ignore, yielding a compressed wave function at near-FCI accuracy. This method, which we call reinforcement-learned configuration interaction, adds another weapon to the sCI arsenal and highlights how reinforcement learning approaches can potentially help solve challenging problems in electronic structure theory.
Analysis of Fourth-, Fifth-, and Infinite-Order Triple Excitations in Unitary Coupled Cluster Theory
Here, in this work, we introduce a perturbative correction to the unitary coupled cluster method with single and double excitations (UCCSD) that incorporates the effects of missing triple excitations through fifth-order in many-body perturbation theory (MBPT). Referred to as UCCSD[T-5], this method is benchmarked alongside the previously developed UCCSD[T] to lend insight into the behavior of perturbative triples corrections relative to UCCSDT, which inherently provides an infinite-order treatment of triple excitations, as well as full configuration interaction (FCI). Two key findings emerge from this analysis. First, UCCSD[T] consistently yields ground-state energies in closest agreement with FCI, outperforming both UCCSD[T-5] and UCCSDT. Second, UCCSD[T-5] largely emulates the behavior of UCCSDT, suggesting a close relationship between fifth- and infinite-order triple-excitation contributions. Given the growing interest in UCC ansätze for quantum computing and the limitations of current quantum hardware, these results highlight the potential of classically computed perturbative corrections within UCC theory to capture triple-excitation effects without the additional quantum resources required by the UCCSDT ansatz.
The Ground State Electronic Energy of Benzene
We report here on the findings of a blind challenge devoted to determining the frozen-core, full configuration interaction (FCI) ground-state energy of the benzene molecule in a standard correlation-consistent basis set of double-ζ quality. As a broad international endeavor, our suite of wave function-based correlation methods collectively represents a diverse view of the high-accuracy repertoire offered by modern electronic structure theory. In our assessment, the evaluated high-level methods are all found to qualitatively agree on a final correlation energy, with most methods yielding an estimate of the FCI value around -863 mE H . However, we find the root-mean-square deviation of the energies from the studied methods to be considerable (1.3 mE H ), which in light of the acclaimed performance of each of the methods for smaller molecular systems clearly displays the challenges faced in extending reliable, near-exact correlation methods to larger systems. While the discrepancies exposed by our study thus emphasize the fact that the current state-of-the-art approaches leave room for improvement, we still expect the present assessment to provide a valuable community resource for benchmark and calibration purposes going forward.