Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERRIMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Writing of a magnetic memory with electric pulses

Methods and memory circuits for altering a magnetic direction of a magnetic memory cell using picosecond electric current pulses are disclosed. One method includes directing a first electric current pulse through the magnetic memory cell that includes a ferrimagnetic material layer to heat the ferrimagnetic material layer to toggle a magnetic direction of the ferrimagnetic material layer from a first magnetic direction to a second magnetic direction.

Yang, Yang↗

Landau-Lifshitz-Bloch equation for ferrimagnets with higher-order interaction

In this work, we present a micromagnetic formulation for modeling the magnetization dynamics and thermal equilibrium in ferrimagnetic materials at low and elevated temperatures. The formulation is based on a mean-field approximation (MFA). In this formulation, the ferrimagnet is described micromagnetically by two coupled sublattices with corresponding interactions, including inter- and intrasublattice micromagnetic exchange as well as four-spin interactions described as an intersublattice molecular field with a cubic dependence of the magnetization. The MFA is used to derive a Landau-Lifshitz-Bloch type equation for ferrimagnetic material, including cases with a ferromagnetic-antiferromagnetic phase transitions. For validation, the results obtained via the presented model are compared with recent experimental data for phase transitions in FeRh.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bias-field controlled phasing and power combination of gyromagnetic nonlinear transmission lines

Gyromagnetic Nonlinear Transmission Lines (NLTLs) generate microwaves through the damped gyromagnetic precession of the magnetic moments in ferrimagnetic material, and are thus utilized as compact, solid-state, frequency agile, high power microwave (HPM) sources. The output frequency of a NLTL can be adjusted by control of the externally applied bias field and incident voltage pulse without physical alteration to the structure of the device. This property provides a frequency tuning capability not seen in many conventional e-beam based HPM sources. The NLTLs developed and tested are mesoband sources capable of generating MW power levels in the L, S, and C bands of the microwave spectrum. For an individual NLTL the output power at a given frequency is determined by several factors including the intrinsic properties of the ferrimagnetic material and the transmission line structure. Hence, if higher power levels are to be achieved, it is necessary to combine the outputs of multiple NLTLs. This can be accomplished in free space using antennas or in a transmission line via a power combiner. Using a bias-field controlled delay, a transient, high voltage, coaxial, three port, power combiner was designed and tested. Experimental results are compared with the results of a transient COMSOL simulation to evaluate combiner performance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Iron-based nanoparticles and grains

Example nanoparticles may include an iron-based core, and a shell. The shell may include a non-magnetic, anti-ferromagnetic, or ferrimagnetic material. Example alloy compositions may include an iron-based grain, and a grain boundary. The grain boundary may include a non-magnetic, anti-ferromagnetic, or ferrimagnetic material. Example techniques for forming iron-based core-shell nanoparticles may include depositing a shell on an iron-based core. The depositing may include immersing the iron-based core in a salt composition for a predetermined period of time. The depositing may include milling the iron-based core with a salt composition for a predetermined period of time. Example techniques for treating a composition comprising core-shell nanoparticles may include nitriding the composition.

Wang, Jian-Ping↗

Iron-based nanoparticles and grains

Example nanoparticles may include an iron-based core, and a shell. The shell may include a non-magnetic, anti-ferromagnetic, or ferrimagnetic material. Example alloy compositions may include an iron-based grain, and a grain boundary. The grain boundary may include a non-magnetic, anti-ferromagnetic, or ferrimagnetic material. Example techniques for forming iron-based core-shell nanoparticles may include depositing a shell on an iron-based core. The depositing may include immersing the iron-based core in a salt composition for a predetermined period of time. The depositing may include milling the iron-based core with a salt composition for a predetermined period of time. Example techniques for treating a composition comprising core-shell nanoparticles may include nitriding the composition.

Wang, Jian-Ping↗

Interfacial Rashba-Effect-Induced Anisotropy in Nonmagnetic-Material–Ferrimagnetic-Insulator Bilayers

Interfacial magnetic anisotropy in magnetic insulators has been largely unexplored. Recently, interface-induced skyrmions and electrical control of magnetization have been discovered in insulator-based heterostructures, which demand a thorough understanding of interfacial interactions in these materials. We observe a substantial, tunable interfacial magnetic anisotropy between Tm 3 Fe 5 O 12 epitaxial thin films and fifteen nonmagnetic materials spanning a significant portion of the periodic table, which we attribute to Rashba spin-orbit coupling. Our results show a clear distinction between nonmagnetic capping layers from the d-block and the p-block. Finally, this work offers a new path for controlling magnetic phases in magnetic insulators for low-loss spintronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of magnetoresistance and ferromagnetic coupling in the complex perovskites CaCu{sub 3}(Mn{sub 4−x}Al{sub x})O{sub 12} (x = 0, 0.2, 0.4, and 0.6): A neutron diffraction study

New compounds of the series CaCu{sub 3}(Mn{sub 4−x}Al{sub x})O{sub 12} have been prepared under high pressure conditions (2 GPa), in the presence of KClO{sub 4} as oxidizing agent to stabilize Mn{sup 3+,4+} mixed valence. The polycrystalline samples have been characterized by x-ray diffraction, neutron powder diffraction (NPD), magnetic, and magnetotransport measurements. All the samples are cubic, space group Im-3. These oxides adopt a superstructure of ABO{sub 3} perovskite given by the long-range 1:3 ordering of Ca{sup 2+} and Cu{sup 2+} ions at the A sublattice. The NPD study for x = 0.4 shows that Al{sup 3+} ions are statistically distributed at the octahedral positions, being the (Mn,Al)O{sub 6} octahedra strongly tilted, with superexchange (Mn,Al)-O-(Mn,Al) angles of 142.1°. Also, neutron data clearly show that some Mn{sup 3+} ions (0.65(2) per formula) are located together with Cu{sup 2+} at the square-planar 6b positions. Regarding the magnetic properties, all the compounds present a spontaneous increase of the magnetization below T{sub C}, typical of ferro-or ferrimagnetic materials, with T{sub C} decreasing upon Al introduction. The magnetic structure determined from low-temperature NPD data unveils a ferromagnetic coupling between (Cu{sup 2+}, Mn{sup 3+}){sub 6b} spins and Mn{sub 8c} spins at octahedral positions; this is in contrast with the ferrimagnetic structure observed for RCu{sub 3}Mn{sub 4}O{sub 12} and CaCu{sub 3}Mn{sub 4}O{sub 12}, where an AFM coupling is observed between both magnetic sublattices. Interestingly, an enhancement of the magnetoresistance effect is observed for x = 0.2, well beyond that found for the parent compound. This effect, in materials subtly doped with non-magnetic elements at the Mn positions, may be of interest for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Half-Metallic Ferrimagnetic Characteristics of Co{sub 2}YZ (Z = P, As, Sb, and Bi) New Full-Heusler Alloys: a DFT Study

The full-Heusler alloys Co{sub 2}YZ (Z = P, As, Sb, and Bi) were investigated by using the state-of-the-art full-potential linearized augmented plane wave plus local orbital (FP-LAPW + lo) method within the framework of density functional theory (DFT), to understand the structural, electronic, and magnetic properties of these new Heusler alloys. The generalized gradient approximation (GGA) was chosen to define the exchange-correlation potential for studying the structural properties, whereas electronic and magnetic properties were developed by using the GGA + U scheme, where U is the Hubbard term, which explains the Coulomb repulsion and was applied to describe the “d” electrons. The structural properties indicated that the ferromagnetic states of these compounds are energetically more favorable than the paramagnetic states. Through results on the electronic structures (band structures and densities of states), it is found that all these alloys exhibit a complete half-metallic nature, with half-metallic gaps (E{sub HM}) of 0.632, 0.605, 1.223, and 0.922 eV for Co{sub 2}YP, Co{sub 2}YAs, Co{sub 2}YSb, and Co{sub 2}YBi alloys, respectively. The magnetic properties indicated that the total spin magnetic moments of these Heusler alloys obey the Slater-Pauling rule around value 2 µ{sub B} approximately. The local magnetic moments of Co and Y transition elements have opposite signs with different intensities, thus revealing the ferromagnetic character. Our study of both electronic and magnetic properties demonstrates in detail that Co{sub 2}YZ (Z = P, As, Sb, and Bi) full-Heusler alloys are complete half-metallic ferrimagnetic materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synchrotron radiation-based far-infrared spectroscopic ellipsometer with full Mueller-matrix capability

We developed far-IR spectroscopic ellipsometer at the U4IR beamline of the National Synchrotron Light Source in Brookhaven National Laboratory. This ellipsometer is able to measure both, rotating analyzer and full-Mueller matrix spectra using rotating retarders, and wire-grid linear polarizers. We utilize exceptional brightness of synchrotron radiation in the broad spectral range between about 20 and 4000 cm{sup -1}. Fourier-transform infrared (FT-IR) spectrometer is used for multi-wavelength data acquisition. The sample stage has temperature variation between 4.2 and 450 K, wide range of {theta}-2{theta} angular rotation, {chi} tilt angle adjustment, and X-Y-Z translation. A LabVIEW-based software controls the motors, sample temperature, and FT-IR spectrometer and also allows to run fully automated experiments with pre-programmed measurement schedules. Data analysis is based on Berreman's 4 Multiplication-Sign 4 propagation matrix formalism to calculate the Mueller matrix parameters of anisotropic samples with magnetic permeability {mu}{ne} 1. A nonlinear regression of the rotating analyzer ellipsometry and/or Mueller matrix (MM) spectra, which are usually acquired at variable angles of incidence and sample crystallographic orientations, allows extraction of dielectric constant and magnetic permeability tensors for bulk and thin-film samples. Applications of this ellipsometer setup for multiferroic and ferrimagnetic materials with {mu}{ne} 1 are illustrated with experimental results and simulations for TbMnO{sub 3} and Dy{sub 3}Fe{sub 5}O{sub 12} single crystals. We demonstrate how magnetic and electric dipoles, such as magnons and phonons, can be distinguished from a single MM measurement without adducing any modeling arguments. The parameters of magnetoelectric components of electromagnon excitations are determined using MM spectra of TbMnO{sub 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Hall switching of the magnetization in Ta/TbFeCo structures with bulk perpendicular anisotropy

Spin-orbit torques are studied in Ta/TbFeCo/MgO patterned structures, where the ferrimagnetic material TbFeCo provides a strong bulk perpendicular magnetic anisotropy (bulk-PMA) independent of the interfaces. The current-induced magnetization switching in TbFeCo is investigated in the presence of a perpendicular, longitudinal, or transverse field. An unexpected partial-switching phenomenon is observed in the presence of a transverse field unique to our bulk-PMA material. It is found that the anti-damping torque related with spin Hall effect is very strong, and a spin Hall angle is determined to be 0.12. The field-like torque related with Rashba effect is unobservable, suggesting that the interface play a significant role in Rashba-like torque.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and electrical control of engineered materials

Methods, systems, and devices are disclosed for controlling the magnetic and electrical properties of materials. In one aspect, a multi-layer structure includes a first layer comprising a ferromagnetic or ferrimagnetic material, and a second layer positioned within the multi-layer structure such that a first surface of the first layer is in direct physical contact with a second surface of the second layer. The second layer includes a material that undergoes structural phase transitions and metal-insulator transitions upon experiencing a change in temperature. One or both of the first and second layers are structured to allow a structural phase change associated with the second layer cause a change magnetic properties of the first layer.

36 MATERIALS SCIENCE↗

Perpendicular ferrimagnetism in strained Mn{sub 2}As film

Ferrimagnetic Mn{sub 2}As thin films with perpendicular magnetic anisotropy were successfully grown on Si(100) by molecular-beam epitaxy. From the reflection high-energy electron diffraction and X-ray diffraction patterns, the orientation of the Mn{sub 2}As film on Si was along the c-axis in the tetragonal crystal structure. Mn{sub 2}As film exhibited ferrimagnetic ordering at temperatures greater than 300 K, which differs from antiferromagnetic or paramagnetic behaviors in the bulk form. The magnetic moment of Mn{sub 2}As determined by saturated magnetization was 0.51 {mu}{sub B} per unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural Underpinnings of Giant Intrinsic Exchange Bias in Epitaxial NiCo 2 O 4 Thin Films

Understanding intrinsic exchange bias in nominally single-component ferromagnetic or ferrimagnetic materials is crucial for simplifying related device architectures. However, the mechanisms behind this phenomenon and its tunability remain elusive, which hinders the efforts to achieve unidirectional magnetization for widespread applications. Inspired by the high tunability of ferrimagnetic inverse spinel NiCo 2 O 4 , the origin of intrinsic exchange bias in NiCo 2 O 4 (111) films deposited on Al 2 O 3 (0001) substrates are investigated. The comprehensive characterizations, including electron diffraction, X-ray reflectometry and spectroscopy, and polarized neutron reflectometry, reveal that intrinsic exchange bias in NiCo 2 O 4 (111)/Al 2 O 3 (0001) arises from a reconstructed antiferromagnetic rock-salt Ni x Co 1-x O layer at the interface between the film and the substrate due to a significant structural mismatch. Remarkably, by engineering the interfacial structure under optimal growth conditions, it can achieve exchange bias larger than coercivity, leading to unidirectional magnetization. Such giant intrinsic exchange bias can be utilized for realistic device applications. This work establishes a new material platform based on NiCo 2 O 4 , an emergent spintronics material, to study tunable interfacial magnetic and spintronic properties.

36 MATERIALS SCIENCE↗

3d-Metal Induced Magnetic Ordering on U(IV) Atoms as a Route toward U(IV) Magnetic Materials

Uranium(IV) 5f 2 magnetism is dominated by a transition from a triplet to a singlet ground state at low temperatures. For the first time, we achieved magnetic ordering of U(IV) atoms in a complex fluoride through the incorporation of 3d transition metal cations. This new route allowed us to obtain an unprecedented series of U(IV) ferrimagnetic materials of the new composition Cs 2 MU 3 F 16 (M = Mn 2+ , Co 2+ , and Ni 2+ ), which were comprehensively characterized with respect to their structural and magnetic properties. Magnetic susceptibility measurements revealed ferromagnetic-like phase transitions at temperatures of ~14.0, 3.5, and 4.8 K for M = Mn 2+ , Co 2+ , and Ni 2+ , respectively. The transition is not observed when the magnetic M cations are replaced by a diamagnetic cation, Zn 2+ . Neutron diffraction measurements revealed the magnetic moments of 0.91(6)–1.97(3) μ B on the U atoms, which are only partially compensated by antiparallel moments of 1.53(14)–3.26(5) μ B on the 3 d cations. This arrangement promotes suppression of the transition to a diamagnetic ground state characteristic of U(IV), and in doing so, induces magnetic ordering on uranium via 3 d –5 f exchange coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning interfacial Dzyaloshinskii-Moriya interactions in thin amorphous ferrimagnetic alloys

Skyrmions can be stabilized in magnetic systems with broken inversion symmetry and chiral interactions, such as Dzyaloshinskii-Moriya interactions (DMI). Further, compensation of magnetic moments in ferrimagnetic materials can significantly reduce magnetic dipolar interactions, which tend to favor large skyrmions. Tuning DMI is essential to control skyrmion properties, with symmetry breaking at interfaces offering the greatest flexibility. However, in contrast to the ferromagnet case, few studies have investigated interfacial DMI in ferrimagnets. Here we present a systematic study of DMI in ferrimagnetic CoGd films by Brillouin light scattering. We demonstrate the ability to control DMI by the CoGd cap layer composition, the stack symmetry and the ferrimagnetic layer thickness. The DMI thickness dependence confirms its interfacial nature. In addition, magnetic force microscopy reveals the ability to tune DMI in a range that stabilizes sub-100 nm skyrmions at room temperature in zero field. Our work opens new paths for controlling interfacial DMI in ferrimagnets to nucleate and manipulate skyrmions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarized neutron measurements of the internal magnetization of a ferrimagnet across its compensation temperature

We present the first polarized neutron transmission image of a model Néel ferrimagnetic material, polycrystalline terbium iron garnet (Tb 3 Fe 5 O 12 , TbIG for short), as it is taken through its compensation temperature T comp where the macroscopic magnetization vanishes. Our polarized neutron imaging data and the additional supporting measurements using neutron spin echo spectroscopy and SQUID magnetometry are all consistent with a vanishing internal magnetization at T comp .

Ferrimagnetism↗

Memory effect and magnetocrystalline anisotropy impact on the surface magnetic domains of magnetite(001)

The structure of magnetic domains, i.e. regions of uniform magnetization separated by domain walls, depends on the balance of competing interactions present in ferromagnetic (or ferrimagnetic) materials. When these interactions change then domain configurations also change as a result. Magnetite provides a good test bench to study these effects, as its magnetocrystalline anisotropy varies significantly with temperature. Using spin-polarized electron microscopy to map the micromagnetic domain structure in the (001) surface of a macroscopic magnetite crystal (~1 cm size) shows complex domain patterns with characteristic length-scales in the micrometer range and highly temperature dependent domain geometries. Although heating above the Curie temperature erases the domain patterns completely, cooling down reproduces domain patterns not only in terms of general characteristics: instead, complex microscopic domain geometries are reproduced in almost perfect fidelity between heating cycles. A possible explanation of the origin of the high-fidelity reproducibility is suggested to be a combination of the presence of hematite inclusions that lock bulk domains, together with the strong effect of the first order magnetocrystalline anisotropy which competes with the shape anisotropy to give rise to the observed complex patterns.

36 MATERIALS SCIENCE↗