Search NASA⌕ Search

SEARCH · Search NASA

Results for “FERRY SPACECRAFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1963

SPACE AGE TRANSPORTATION SYSTEMS

Space age transportation systems such as reusable launch vehicles, orbital passenger and cargo ferry vehicles and lunar, nuclear ferry vehicles

SPACECRAFT CONFIGURATION↗
NASA NTRS1963

LATERAL-RANGE AND HYPERSONIC LIFT-DRAG-RATIO REQUIREMENTS FOR EFFICIENT FERRY SERVICE FROM A NEAR-EARTH MANNED SPACE STATION

The operation of any long-term manned space station will require some type of ferry vehicle to transport men and equipment to and from the station with regularity and reliability. Such a vehicle, designed for entry at near-orbital speeds, could also be useful in the return from any deeper space mission if either an earth-orbit rendezvous terminal maneuver or a maneuver combining atmospheric braking and a near-earth parking orbit is used. This study was undertaken to determine the class of vehicle which could be most efficiently used as a ferry vehicle between a near-earth space station and the earth. One measure of this efficiency is the ability of the vehicle to reach pre-chosen landing sites with some prescribed frequency. In considering this frequency of return it is necessary to consider not only the normal mode of operation in which only infrequent returns are scheduled at desirable times, but also operation under various degrees of emergency, which dictate quick or even immediate return to earth. In extreme emergencies, when immediate return to earth is necessary, choice of landing site becomes impractical. In most cases, however, although it might be required to abandon the station quickly, the ferry vehicle could remain in orbit for some time before initiating reentry in order to land at a prechosen site. The allowable delay time in orbit would be determined primarily by the capabilities of the ferry life-support system. This paper will examine the geometry of the ferry ranging problem, that is, the lateral ranges required to reach chosen landing sites from various near-earth orbits, and will investigate and compare several means of achieving these ranges. The particular case considered is that of returning from a space station which is in a circular orbit at an altitude of 200 statute miles, but the results obtained are not sensitive to orbit altitude for orbits within a few hundred miles of the surface. From this orbit, the vehicle will retro and reenter at very close to satellite velocity. The downrange problem can be handled by proper timing of the retrofiring , and the desired lateral range can be achieved by aerodynamics, space propulsion to change orbit plane, atmospheric propulsion, or combinations of these methods. The relative cost in terms of weight of using these different methods to achieve lateral range will be discussed.

Hypersonic vehicle↗
NASA NTRS2012

Red Dragon: Low-cost Access to the Surface of Mars using Commercial Capabilities

We will discuss the feasibility of using a minimally-modified variant of a SpaceX Dragon capsule as a low-cost, large-capacity, near-term, Mars lander for scientific and human-precursor missions. We have been evaluating such a Red Dragon platform as an option for a Discovery Program mission concept. A Red Dragon lander has the potential to be low cost primarily because it would be derived from a routinely-flying spacecraft. Dragon is being developed to ferry cargo and crew to and from the International Space Station (ISS). The cargo variant is currently undergoing test flights, which will be followed by standard ISS cargo missions and, eventually, crewed flights. The human variant, unlike other Earth-return vehicles, appears to also have most of the capabilities necessary to land on Mars. In particular, it has a set of high-thrust, throttleable, storable bi-propellant Super- Draco engines integrated directly into the capsule which are intended for launch abort and powered landings on Earth. These thrusters suggest the possibility of a parachute-free, fully-propulsive deceleration at Mars from supersonic speeds to the surface. Concepts for large, human-relevant landers (see, e.g., [1]) also often employ supersonic retro-propulsion; Red Dragon's entry, descent, and landing approach would scale to those landers. Further, SpaceX's Falcon Heavy launch vehicle, currently under development and expected to have its first flight in 2013, will be capable of sending Dragon on a trajectory to Mars. We will discuss our motivation for exploring a Red Dragon lander, the primary technical questions which determine its feasibility, and the current results of our analysis. In particular, we will examine entry, descent, and landing (EDL) in detail. We will describe the modifications to Dragon necessary for interplanetary cruise, EDL, and operations on the Martian surface.

Karcz, John↗
NASA NTRS1987

Advanced electric propulsion for interplanetary missions

Three specific mission applications of advanced electric propulsion systems are discussed and include: the Comet Rendevous Asteroid Flyby (CRAF) science mission, a cargo ferry vehicle for lunar base construction and resupply and a manned mars spacecraft for initial surface exploration. In all three cases electric propulsion is shown to greatly enhance these missions either by increasing payload, lowering the initial spacecraft mass or a combination of the two. Trip times for all but the lunar ferry application are shown to be comparable to using chemical propulsion. The present status and future development goals of the electric propulsion engine technologies to support these mission applications are also discussed.

Aston, Graeme↗
NASA NTRS1992

Thruster sealing system and apparatus

A thruster nozzle sealing system and apparatus is provided for protection of spacecraft thruster motors. The system includes a sealing plug, a sealing plug insertion tool, an outer cover, an outer cover attachment, and a ferry flight attachment. The sealing plug prevents moisture from entering the thruster engine so as to prevent valve failure. The attachments are interchangeably connectable with the sealing plug. The ferry flight attachment is used during air transportation of the spacecraft, and the outer cover attachment is used during storage and service of the spacecraft. The outer cover provides protection to the thruster nozzle from mechanical damage.

Svejkovsky, Paul A.↗
NASA NTRS2007

Testing Lunar Return Thermal Protection Systems using Sub-Scale Flight Test Vehicles

A key objective of NASA's Vision for Space Exploration is to revisit the lunar surface. Such an ambitious goal requires the development of a new human-rated spacecraft, the Orion Crew Exploration Vehicle (CEV), to ferry crews to low earth orbit and to the moon. The successful conclusion of both types of missions will require a thermal protection system (TPS) capable of protecting the vehicle and crew from the extreme heat of atmospheric reentry. As a part of the TPS development, various materials are being tested in arcjet tunnels; however, the combined lunar return aerothermal environment of high heat flux, shear stress, and surface pressure cannot be duplicated using only existing ground test facilities. To ensure full TPS qualification, a flight test program using sub-scale Orion capsules has been proposed to test TPS materials and heat shield construction techniques under the most stressing combination of lunar return aerothermal environments. Originally called Testing Of Reentry Capsule Heat Shield, or TORCH, but later renamed LEX, for Lunar Reentry Experiment, the proposed flight test program is presented along with the driving requirements and descriptions of the vehicle and the TPS instrumentation suite slated to conduct in-flight measurements.

heatshield↗
NASA NTRS1987

Ferry to the moon

Solar-electric propulsion for a fleet of lunar ferry vehicles may allow the creation of a permanent lunar base not long after the turn of the century with greater cost effectiveness than a fleet of chemically powered spacecraft. After delivery by the Space Shuttle to a 300-km earth orbit, the lunar ferry envisioned would travel in spiral trajectory to the moon under the power of 300-kW solar arrays and ten 30-kW Xe-ion engines; each of the solar arrays would be 12 x 61 m long. Each trip between the earth parking orbit and the moon would take about 1 year, so that a fleet of four ferries operating simultaneously could deliver 20 metric tons to a lunar base every 100 days.

Aston, Graeme↗
NASA NTRS1987

Aeroassisted manned transfer vehicle (TAXI) for advanced Mars Transportation: NASA/USRA 1987 Senior Design Project

A conceptual design study of an aeroassisted orbital transfer vehicle is discussed. Nicknamed TAXI, it will ferry personnel and cargo: (1) between low Earth orbit and a spacecraft circling around the Sun in permanent orbit intersecting gravitational fields of Earth and Mars, and (2) between the cycling spacecraft and a Mars orbiting station, co-orbiting with Phobos. Crew safety and mission flexibility (in terms of ability to provide a wide range of delta-V) were given high priority. Three versions were considered, using the same overall configuration based on a low L/D aerobrake with the geometry of a raked off elliptical cone with ellipsoidal nose and a toroidal skirt. The propulsion system consists of three gimballed LOX/LH2 engines firing away from the aerobrake. The versions differ mainly in the size of the aeroshields and propellant tanks. TAXI A version resulted from an initial effort to design a single transfer vehicle able to meet all delta-V requirements during the 15-year period (2025 to 2040) of Mars mission operations. TAXI B is designed to function with the cycling spacecraft moving in a simplified, nominal trajectory. On Mars missions, TAXI B would be able to meet the requirements of all the missions with a relative approach velocity near Mars of less than 9.3 km/sec. Finally, TAXI C is a revision of TAXI A, a transfer vehicle designed for missions with a relative velocity near Mars larger than 9.3 km/sec. All versions carry a crew of 9 (11 with modifications) and a cargo of 10000 lbm. Trip duration varies from 1 day for transfer from LEO to the cycling ship to nearly 5 days for transfer from the ship to the Phobos orbit.

Source record↗
NASA NTRSDate not supplied

The Gateway Program as Part of NASA’s Plans for Human Exploration Beyond Low Earth Orbit

This paper provides an overview and status of Gateway, humanity’s first space station in lunar orbit as a vital component of the NASA-led Artemis missions to return humans to the Moon as preparation for the first human missions to Mars. Gateway is an aggregation point in deep space for a variety of spacecraft, including the crewed Orion vehicle, the Human Landing System that will ferry astronauts to and from the lunar surface, logistics supply craft, and vehicles transiting further into deep space beyond the Earth-Moon system, such as to Mars. NASA is building on decades of partnership with space agencies on three continents and multiple commercial partners to design, build, and launch Gateway’s core elements to near-rectilinear halo orbit (NRHO) around the Moon, where it will operate for a minimum of 15 years. Gateway is humanity’s next in-space science utilization platform, and its first in deep space, with three science payloads already selected to study solar and cosmic radiation. This paper will provide an overview of the Gateway space station’s major components in various stages of development, including the Power and Propulsion Element (PPE), Habitation and Logistics Outpost (HALO), the International Habitation (I-Hab) module, ESPRIT Refueling Module (ERM), the planned airlock, advanced external robotics systems, Deep Space Logistics supply craft, and next-generation autonomous Vehicle System Manager software. It will also provide an overview of how Gateway will be utilized for science, and highlight the space station’s multilateral governance structure and international agreements.

Emma Lehnhardt↗
NASA NTRS1988

Design of an interim space rescue ferry vehicle

This paper proposes a stop-gap nonoptimum vehicle for transferring astronauts from a tumbling stranded spacecraft to a nearby rescue spacecraft. The design is limited to the use of available or 'soon-to-be' available flight-qualified hardware and consists of three major components: the manned maneuvering unit, the personnel rescue enclosure, and the apogee kick motor capture device. The apogee kick motor capture device is modified to serve as the connection between the manned maneuvering unit and the personnel rescue enclosure. The performance of this interim rescue vehicle is analyzed with NASA flight simulation software to test the feasibility of the design. Results show that the control system of the manned maneuvering unit adequately limits uncommanded rotations during all simulated maneuvers in the primary control mode but not during transverse translations in the backup control mode. Impingement of thruster plumes on the personnel rescue enclosure is shown to be of some importance in certain maneuvers. The satellite stabilization mode of the control system is found to have significant rotational-to-translational coupling that has associated adverse effects on flying qualities, making the mode undesirable for the rescue mission.

Halsell, James D., Jr.↗
NASA NTRS1990

Proposal for a remotely manned space station

The United States is in trouble in space. The costs of the proposed Space Station Freedom have grown beyond reach, and the present design is obsolete. The trouble has come from imagining that there are only two alternatives: manned vs. unmanned. Both choices have led us into designs that do not appear to be practical. On one side, the United States simply does not possess the robotic technology needed to operate or assemble a sophisticated unmanned space station. On the other side, the manned designs that are now under way seem far too costly and dangerous, with all of its thousands of extravehicular activity (EVA) hours. More would be accomplished at far less cost by proceeding in a different way. The design of a space station made of modular, Erector Set-like parts is proposed which is to be assembled using earth-based remotely-controlled binary-tree telerobots. Earth-based workers could be trained to build the station in space using simulators. A small preassembled spacecraft would be launched with a few telerobots, and then, telerobots could be ferried into orbit along with stocks of additional parts. Trained terrestrial workers would remotely assemble a larger station, and materials for additional power and life support systems could be launched. Finally, human scientists and explorers could be sent to the space station. Other aspects of such a space station program are discussed.

Minsky, Marvin↗