Search NASA⌕ Search

SEARCH · Search NASA

Results for “FISSION PRODUCT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Rapid activation product separations from fission products and soil matrixes

We report that a rapid method for the separation and qualitative analysis of several neutron activation products ( 198 Au, 192 Ir, 72 Ga, 51 Cr, 191/195m/197 Pt, 54 Mn, 57 Co, and 59 Fe) from fission products and soil matrixes has been developed. Analytes were isolated within 20 h using ion exchange chromatography. After separation, the activation products were characterized by γ-spectroscopy and inductively coupled plasma-optical emission spectroscopy. Validation experiments demonstrated versatility of the method, showing that the activation products could be isolated from fresh fission products and other contaminants associated with complex soil matrixes.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Angular Correlations of Gamma Rays from Fission Product Solution

Fission products from photon-induced fission are routinely used at Idaho National Laboratory as part of nuclear forensics activities. Typically, the focus is on fission products with relatively large fission yields (Ba-140, Mo-99, etc.). The nuclear data associated with the well-known isotopes have small uncertainties, and many have well-known angular correlations between emitted gamma-rays, if applicable. However, for isotopes with smaller fission yields or less intense gamma-ray emission intensities, the nuclear decay schemes and gamma-ray emission intensities may be less well-known. The Germanium Rotational Measurements for Angular Correlation (GeRMAC) system was designed to use two high-purity germanium (HPGe) detectors in a coincidence counting set-up but allows one of the HPGe detectors to rotate at a constant distance from a radioactive source, changing the relative angle between the two HPGe detectors. Angular correlations can then be determined from the relative photopeak areas between two gamma-rays emitted as part of the same nuclear decay. By recording the HPGe spectra in list mode, the angular correlations of gamma-rays emitted from complex sources, consisting of multiple isotopes, can be measured simultaneously and the individual isotope emissions can be isolated. Using the GeRMAC system, a multi-isotope fission product source, produced with photon-induced fission of U-238, was measured using a single rotational arc (180 degrees) to obtain the angular correlation between gamma-rays emitted by the large number of fission products contained in the solution with an angular accuracy of 1 degree. In particular, La-140 (38 gamma rays) and Nd-147 (26 gamma rays) are of interest to the nuclear forensics community.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗
DOE OSTI2020

Measurement of distribution coefficients on TODGA resin and development of a group separation for mixed activation and fission product samples

Batch equilibrium experiments were performed to determine the distribution coefficients for Sc, Ir, and Ta on N,N,N’,N’tetraoctyl-1,5-diglycolamide (TODGA) resin in various acid matrices. Distribution coefficients were determined in hydrochloric acid (Sc, Ir), nitric acid (Sc, Ta), and a mixture of nitric acid and 0.2M hydrofluoric acid (Sc, Ir, Ta). The distribution coefficients determined through these experiments were then utilized to create a group separation method for activation products, fission products, and environmental constituents.

Louie, Christina A.↗
DOE OSTI2019

Fission Product Measurement and Off-Gas Scrubbing for Molten Salt Reactors

The Advanced Reactor Technology (ART) program within the US Department of Energy is developing understanding and technology to help facilitate molten salt reactor commercialization. The off-gas system for MSRs plays an important role in fission product confinement. The strategy used in MSRs is different from that used in pressurized water reactors, where the off-gas mainly mitigates severe accident conditions. Although the details vary depending on the reactor type, the off-gas system of MSRs must reduce radiological emissions to the environment to levels comparable with those mandated for non-MSRs. Systems with molten fuel salt will accumulate material in the headspace: volatile fission products, entrained salt particles, graphite fines, and material that has low solubility in the salt. Operators of thermal fluoride salt reactors with encapsulated fuel will also be concerned about tritium generation and migration. The fission and activation products include noble gases, their daughters, tritium, and aerosolized salt constituents. Their concentrations will generally increase with reactor burnup, depending on the various strategies used for mitigation. Additionally, tritium capture and removal has been reviewed by several groups.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1967

Computer program FPIP-REV calculates fission product inventory for U-235 fission

Computer program calculates fission product inventories and source strengths associated with the operation of U-235 fueled nuclear power reactor. It utilizes a fission-product nuclide library of 254 nuclides, and calculates the time dependent behavior of the fission product nuclides formed by fissioning of U-235.

Brown, W. S.↗
DOE OSTI2020

Zinc-in-titania waste form for immobilizing lanthanide fission products from electrochemical reprocessing

This paper provides microstructural, microchemical, and bulk X-ray diffraction information for a zinc-in-titania waste form for immobilizing rare-earth oxide (REOx) fission products recovered through precipitation from electrochemical salt wastes. This waste form can be used to immobilize REOx at loadings as high as 40 mass% in a chemically durable matrix consisting of glass-bonded minerals including Zn2TiO4 as well as RE-containing phases of REOx, RE2Ti2O7, and REPO4 (monazite). Chemical durability data is also provided, and comparisons are drawn between this waste form and one made using a similar process with half the REOx loading.

rare earth, rare earth waste form, electrochemical↗
DOE OSTI2024

Energy dependence of fission product yields in the second-chance fission region

An extensive dataset of cumulative fission product yields has been generated under a joint collaboration between Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and the Triangle Universities Nuclear Laboratory (TUNL). The energy dependence of the cumulative yield for a select number of high-yield fission products has been measured using quasimonoenergetic neutrons with energies between 5.5 and 11.0 MeV. This is in addition to previously published data covering 0.5–4.5 and 14.8 MeV. The absolute number of fissions was determined during the irradiation period using dual-fission ionization chambers, and the fission products were measured postactivation by whole target γ-ray spectroscopy. Here this paper presents the absolute cumulative fission product yields as a function of incident neutron energy from the neutron-induced fission of 235 U, 238 U, and 239 Pu isotopes at four incident energies in the second-chance fission region and compares them with existing literature values. Corrections relevant to this collaboration's previously published data are also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Characterization of a platform for the gas transport, collection, and identification of fission products in the high-intensity laser environment

Recent progress in the production of laser accelerated high flux proton beams opens new possibilities for the study of fission in unique environments. To this end, we are currently pursuing the development of a platform for the swift gas transport, collection, and identification of fission products. Fission is induced in targets fixed inside a sealed chamber through which a carrier gas flows, transporting fission products to a carbon filter for collection and online spectroscopy. This has been recently demonstrated using target normal sheath accelerated protons at the PHELIX laser facility. There were large discrepancies between measured rates and those expected based on established fission yields and measured beam parameters. These discrepancies prompted a large number of tests at the Idaho Accelerator Center (IAC), where fission in uranium is induced by bremsstrahlung photons generated by 21 MeV electrons from a linear electron accelerator. Here, the results are compared to a series of models that account for the slowing of energetic fission fragments in the carrier gas and the fluid dynamics of the gas flow that transports fission products to the collection filter. Characterization of the apparatus reveals a few mechanisms that together account for a portion of the previously observed discrepancies at the PHELIX laser facility. However, additional research is necessary before high-accuracy experiments can be performed with the apparatus. Work performed under the auspices of the U.S. Department of Energy by LLNL under contract DE-AC52-07NA27344.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Fission Product Chain Yield Measurements [Slides]

Fission product chain yields were historically determined by chemical separation and beta counting of fissile samples irradiated in carefully controlled fission chamber experiments. These measurements provided the means to extract absolute fission product yields (yield per fission, or Y $\mathcal{i}$ /$\mathcal{f}$ for the $\mathcal{i}$ $\mathcal{th}$ fission product) that are included in the international nuclear data libraries, and ultimately used to model and characterize multiplying systems. However, reevaluations conducted at Los Alamos National Lab and Lawrence Livermore National Lab in 2005-2009 for neutron-induced fission of 235 U and 239 Pu highlighted disagreement among many of the measurements. This led to several new, targeted experimental programs to resolve these disagreements. In this presentation we will highlight recent efforts to address these discrepancies using energy-integral measurements at the National Criticality Experiments Research Center (NCERC) and outline our plans to complete the work over the next several years.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Separation of Lanthanide Isotopes from Mixed Fission Product Samples

The measurement of radioactive fission products from nuclear events has important implications for nuclear data production, environmental monitoring, and nuclear forensics. In a previous paper, the authors reported the optimization of an intra-group lanthanide separation using LN extraction resin from Eichrom Technologies®, Inc. and a nitric acid gradient. In this work, the method was demonstrated for the separation and quantification of multiple short-lived fission product lanthanide isotopes from a fission product sample produced from the thermal irradiation of highly enriched uranium. The separations were performed in parallel in quadruplicate with reproducible results and high decontamination factors for 153 Sm, 156 Eu, and 161 Tb. Based on the results obtained here, the fission yields for 144 Ce, 153 Sm, 156 Eu, and 161 Tb are consistent with published fission yields. This work demonstrates the effectiveness of the separations for the intended application of short-lived lanthanide fission product analysis requiring high decontamination factors.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Development and application of sorption mass transfer models for fission product transport in TRISO fuel systems using BISON

Fission product mass transfer within and between TRISO particle and compact layers is an important phenomenon. It directly impacts fission product release predictions, which are used as source terms for safety and licensing calculations. Modeling fission product transport within layers and across bonded interfaces is relatively straightforward under the assumptions of isotropic Fickian diffusion, concentration continuity, and flux continuity. Modeling fission product transport across gaps and debonded layers is more difficult. Gaps are known to form between the buffer and inner PyC (IPyC), and debonding may occur between the IPyC and silicon carbide (SiC). A new mass transfer model was developed to provide a more accurate and robust fission product release calculation by accounting for interlayer sorptivity. One importance of the new model is to account for temperature and material changes across the gap based on sorption isotherm. This work presents the development of the sorption behavioral model and a fission product trapping model, and analyses the subsequent fission product diffusion behavior, specifically cesium, through TRISO particles and compact materials using the BISON fuel performance code.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Fission Product Yield Modeling and Evaluation

Although independent and cumulative fission product yields have been a part of evaluated libraries for decades, there have been few updates over the years. The fission product yield sub-library in the ENDF/B-VIII.0 library is still largely based on the evaluation of England and Rider from the mid-90’s, with only more recent updates to the energy dependence of 239 Pu below 2 MeV and fixes to isomeric states and missing fission products. Over the past several years, there have been a wealth of new measurements of independent and cumulative fission product yields, particularly those with short half-lives, and there have been significant improvements in the modeling of prompt and delayed fission observables. Here, we describe recent progress in the improvement of fission product yield calculations, using the BeoH code and the underlying Hauser Fesh-bach Fission Fragment Decay (HF 3 D) model, developed at Los Alamos National Laboratory. We will describe our recent calculations for consistent prompt and delayed fission observables for major and minor actinides, including new work investigating isomeric ratios. We will detail the ongoing evaluation process for energy-dependent fission product yields from thermal up to 20 MeV incident neutron energy and some validation work that has been performed for these new fission product yield calculations. Additionally, we will discuss future perspectives of this work, highlighting the need for additional data.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Micro- and Nano-techniques for the Study of Fission Product Precipitation in SiC Layer

The complexity of fission product distribution and composition within the SiC layer of tristructural isotropic (TRISO) coated particles, irradiation effects on the SiC structure as well as the variable nature of metallic fission product release, has led to the exploration of multiple micro- and nano-characterization techniques. The fine scale of the fission product precipitates necessitates unique learnings and application of electron microscopic techniques with irradiated fuel during the Advanced Gas Reactor (AGR)-1 experiment analysis. A summarized discussion on the specific advanced techniques with associated method development for TRISO coated particles is provided followed by the down selected techniques currently considered to provide the highest impact. Techniques considered are electron probe micro-analyzer (EPMA), scanning transmission electron microscopy (STEM), and Precession electron diffraction (PED). SiC grain boundary characteristics are evaluated due to the mobility of specific fission products through grain boundaries. PED was performed for understanding the role of grain boundary character on fission product transport. One set of comparative analyses between AGR-1 and AGR-2 particles leads to a finding that the AGR-1, high-Ag-retention particle, had statistically more coincidence site lattice (CSL)-related grain boundaries (but fewer low-angle grain boundaries), compared to the AGR-2 particle. This implies that CSL-related grain boundaries may have a direct influence on Ag retention. However, precipitates were found on a relatively small fraction of CSL-related grain boundaries in both particles. In another set of comparison between AGR-1 and AGR-2 particles that were subjected to safety testing, there is significant differences in average SiC grain boundary distributions, but the fission product distributions on these grain boundaries are very similar.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

AGR-5/6/7 Irradiation Experiment Fission Product Mass Balance

This report presents the fission product mass balance for the AGR-5/6/7 TRISO fuel irradiation experiment. The fission product inventories deposited on capsule components outside of the fuel (e.g., stainless-steel shells, graphite holders, Grafoil disks, and associated hardware) were quantified as part of the post-irradiation examination (PIE) to assess the performance of this fuel. Comparisons were made between these inventories and depletion calculations, non-destructive measurements of fuel fission product inventories in the intact fuel compacts, prior AGR experiments, and results from among each of the five distinct AGR-5/6/7 capsules. The data served as estimates of the condensable fission products released from the fuel during irradiation. Excluding Capsule 1 (which experienced accidental damage during irradiation) and Capsule 3 (which was tested at very high irradiation temperatures of >1300°C), the results indicate that the AGR-5/6/7 fuel performed comparably to fuel from earlier AGR experiments. The mass balance results were also used to estimate the number of particles with in-pile SiC failures. Subject to the assumptions made in these estimates, and excluding Capsules 1 and 3, the in-pile SiC failure rates for AGR-5/6/7 are comparable to those observed in AGR-2.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

AGR TRISO Fuel Fission Product Release Data Summary

Knowledge of fission product retention in and release from TRISO fuel under normal and off-normal conditions is needed for reactor safety analyses. This is important for coated-particle fuel used in high-temperature reactors relying on the functional containment strategy. Data on the release and retention of key fission products (e.g., Ag-110m, Cs-134, Eu-154, and Sr-90) in AGR UCO TRISO fuels have been summarized in this report, and empirical relationships with respect to time and temperature were developed. This included fission product accumulation in the OPyC and compact graphitic matrix during irradiation, release from compacts during irradiation, and release during post-irradiation safety testing at temperatures from 1600-1800°C. The frequencies of SiC failure and TRISO coating failure from irradiation and post-irradiation safety testing were also summarized as they have bearing on the quantities of Cs release from the fuel. In a forthcoming publication, a framework for combining and using these empirical relationships as part of a source term analysis will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Energy Dependent Fission Product Yields (2nd year Milestone and Deliverables)

Introduction to the project: One of the Laboratory missions is to provide consistent, high-precision fission product; yield data critical for testing fission models and maintaining the safety and security of the nation’s nuclear weapons stockpile. However, high-quality, energy-differential fission product yield data is missing for certain actinides and neutron energies important to constrain the new U.S. Nuclear Data Program evaluation effort; It has been shown that the reactor antineutrino anomaly may be at least partially caused by roughly 20 fission products. The fission product yield data is missing or incomplete for many of these isotopes, thus it is necessary to accurately determine these values to better constrain the anomaly; Aitor Bracho is measuring very short-lived (seconds to minutes) fission product yields of 235 U and 239 Pu using monoenergetic neutron beams at E n = 60 and 560 keV; Aitor Bracho is using a direct approach utilizing a state-of-the-art rabbit transfer system, superior HPGe detector, and digital acquisition systems for fission decay measurements. The goals of this project: lop experimental capabilities and data analysis techniques to carry out the gamma-ray spectra analysis necessary for fission product yield calculation; Provide high-precision and energy-dependent fission product data supporting fission theory, neutrino physics, and applied physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Energy dependence of chain fission product yields from neutron-induced fission of 235 U, 238 U, and 239 Pu

The lack of completeness and systematic studies of cumulative fission product yield (FPY) from the three major actinides of 235 U, 238 U, and 239 Pu, over a broad energy range, was the primary motivation for the LLNL-LANL-TUNL collaboration. Given the focus on resolving FPY behavior around fission spectrum neutron energies, our 2016 data provides FPY measurements in fine energy steps in the range of 0.5–5.5 MeV and an additional anchor point at 14.8 MeV. Recently, our collaboration filled the gap between second chance fission and 14.8 MeV, providing a comprehensive study at eleven incident neutron energies from 0.5 to 14.8 MeV. However, during the course of the last measurements, it was found that the reported masses of the actinide deposits in the fission ionization chambers, which were used to measure the number of fissions, were not consistent with the complementary tests. Therefore, some corrections to the old data are needed. The purpose of this paper is to summarize all of the high-yield FPY data obtained for 235 U, 238 U, and 239 Pu isotopes using quasi-monoenergetic neutron beams at 11 incident energies ranging from E n = 0.5 to 14.8 MeV.

Tonchev, A. P. [Lawrence Livermore National Labora↗