Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME PROPAGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Turbulent flame propagation in partially premixed flames

Turbulent premixed flame propagation is essential in many practical devices. In the past, fundamental and modeling studies of propagating flames have generally focused on turbulent flame propagation in mixtures of homogeneous composition, i.e. a mixture where the fuel-oxidizer mass ratio, or equivalence ratio, is uniform. This situation corresponds to the ideal case of perfect premixing between fuel and oxidizer. In practical situations, however, deviations from this ideal case occur frequently. In stratified reciprocating engines, fuel injection and large-scale flow motions are fine-tuned to create a mean gradient of equivalence ratio in the combustion chamber which provides additional control on combustion performance. In aircraft engines, combustion occurs with fuel and secondary air injected at various locations resulting in a nonuniform equivalence ratio. In both examples, mean values of the equivalence ratio can exhibit strong spatial and temporal variations. These variations in mixture composition are particularly significant in engines that use direct fuel injection into the combustion chamber. In this case, the liquid fuel does not always completely vaporize and mix before combustion occurs, resulting in persistent rich and lean pockets into which the turbulent flame propagates. From a practical point of view, there are several basic and important issues regarding partially premixed combustion that need to be resolved. Two such issues are how reactant composition inhomogeneities affect the laminar and turbulent flame speeds, and how the burnt gas temperature varies as a function of these inhomogeneities. Knowledge of the flame speed is critical in optimizing combustion performance, and the minimization of pollutant emissions relies heavily on the temperature in the burnt gases. Another application of partially premixed combustion is found in the field of active control of turbulent combustion. One possible technique of active control consists of pulsating the fuel flow rate and thereby modulating the equivalence ratio (Bloxsidge et al. 1987). Models of partially premixed combustion would be extremely useful in addressing all these questions related to practical systems. Unfortunately, the lack of a fundamental understanding regarding partially premixed combustion has resulted in an absence of models which accurately capture the complex nature of these flames. Previous work on partially premixed combustion has focused primarily on laminar triple flames. Triple flames correspond to an extreme case where fuel and oxidizer are initially totally separated (Veynante et al. 1994 and Ruetsch et al. 1995). These flames have a nontrivial propagation speed and are believed to be a key element in the stabilization process of jet diffusion flames. Different theories have also been proposed in the literature to describe a turbulent flame propagating in a mixture with variable equivalence ratio (Muller et al. 1994), but few validations are available. The objective of the present study is to provide basic information on the effects of partial premixing in turbulent combustion. In the following, we use direct numerical simulations to study laminar and turbulent flame propagation with variable equivalence ratio.

Poinsot, T.↗

End-gas autoignition fraction and flame propagation rate in laser-ignited primary reference fuel mixtures at elevated temperature and pressure

Knock in spark-ignited (SI) engines is initiated by autoignition of the unburned gasses upstream of spark-ignited, propagating, turbulent premixed flames. Knock propensity of fuel/air mixtures is typically quantified using research octane number (RON), motor octane number (MON), or methane number (MN; for gaseous fuels), which are measured using single-cylinder, variable compression ratio engines. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gasses upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (PRF; n-heptane/isooctane) blends of varying reactivity (50 ≤ PRF ≤ 100) were ignited using an Nd:YAG laser over a range of temperatures and pressures, all in excess of 545 K and 16.1 bar. Laser ignition produced outwardly-propagating premixed flames. High-speed pressure measurements and schlieren images indicated the presence of EGAI. The fraction of the total heat release attributed to EGAI (i.e., EGAI fraction) varied with fuel reactivity (i.e., octane number) and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, which were measured using schlieren images, were only weakly correlated with octane number but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates approached one-dimensional premixed laminar flame speed computations performed at the same conditions. Experiments were simulated with a three-dimensional CONVERGE™ model using reduced chemical kinetics (121 species, 538 reactions). The simulations accurately captured the measured flame propagation rates, as well as the variation in EGAI fraction with fuel reactivity and time-integrated end-gas temperature. The simulations also revealed low-temperature heat release as well as formaldehyde and hydrogen peroxide formation in the end-gas upstream of the propagating flame, which increased the temperature and degree of chain branching in the end-gas, ultimately leading to EGAI.

42 ENGINEERING↗

Effect of Fuel Reactivity and End- Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

Zdanowicz, Andrew↗

Effect of Fuel Reactivity and End-Gas Temperature on Autoignition and Flame Propagation Rate in Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Knock in spark-ignited (SI) engines is initiated by autoignition in the unburned gases upstream of spark-ignited, propagating, turbulent premixed flames. In this study, knock propensity of SI fuels was quantified via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (n-heptane/isooctane) blends of varying reactivity were ignited using an Nd:YAG laser over a range of compressed temperatures and pressures, all in excess of 691 K and 18.8 bar. High-speed pressure measurements and schlieren images indicated the presence of EGAI in the unburned gases upstream of spherical, outwardly propagating flames. The fraction of the total heat release attributed to EGAI was found to vary with fuel reactivity and the time-integrated temperature of the end-gas prior to ignition. Flame propagation rates, measured using schlieren imaging, did not vary strongly with fuel reactivity but were affected by turbulence caused by variation in piston timing. Under conditions of low turbulence, measured flame propagation rates agreed with one-dimensional premixed laminar flame speed computations performed at the same conditions.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

Theory of flame propagation

The mechanism of flame propagation has been qualitatively formulated. In accordance with this formulation, the chemical reaction initiated in some layer brings about an increase in the temperature; because of the heat conduction, the temperature is raised in the neighboring layer where in turn the chemical reaction is initiated. In this manner the flame is propagated.

THEORIES - FLAME-PROPAGATION↗

Thermal Theory of Combustion and Explosion: Theory of Normal Flame Propagation - 3

The technical memorandum covers experimental data on flame propagation, the velocity of flame propagation, analysis of the old theoretical views of flame propagation, confirmation of the theory for simple reactions (theory of combustion of explosive substances and in particular nitroglycol), and check of the theory by example of a chain oxidizing reaction (theory of flame propagation in carbon monoxide, air and carbon monoxide - oxygen mixtures).

Semenov, N. N.↗

Flame propagation and extinction in particle clouds

Two phase flame propagation and extinction theory required to support the corresponding experiments planned for the space shuttle is being developed. Also being planned are specialized collaborative, experimental and theoretical NASA UCSD studies needed to support the ongoing definition of needed experimental hardware, experimental procedures, data acquisition philosophy, and other ground based support activities required to assure the success of space shuttle based experiments concerned with combustion of clouds of particulates at reduced gravitational conditions. The further development of relations delineating premixed particle cloud and premixed gaseous systems as well as burner stabilized and freely propagating flame systems is considered.

Berlad, A. L.↗

End-Gas Autoignition Fraction and Flame Propagation Rate in Laser-Ignited Primary Reference Fuel Mixtures at Elevated Temperature and Pressure

Engine knock in spark-ignited (SI) engines is initiated by autoignition and detonation in the unburned gases (i.e., end-gas) upstream of the spark-ignited, propagating, turbulent premixed flame. Knock propensity of fuel/air mixtures is quantified by research octane number (RON), motor octane number (MON), or methane number (MN; for gaseous fuels), which are typically measured using single-cylinder, variable compression ratio research engines. In this study, we demonstrate the ability to evaluate knock propensity of SI fuels via observations of end-gas autoignition (EGAI) in unburned gases upstream of laser-ignited, premixed flames at elevated pressures and temperatures in a rapid compression machine. Stoichiometric primary reference fuel (PRF; n-heptane/isooctane) blends of varying reactivity (50 ≤ PRF ≤ 100) were ignited using an Nd:YAG laser at five discrete temperature and pressure conditions, all in excess of 485 K and 16.75 bar. Laser ignition produced outwardly-propagating, laminar premixed flames. High-speed pressure measurements, paired with high-speed Schlieren imaging, clearly indicated the presence of EGAI. The fraction of the total heat release attributed to EGAI (e.g. EGAI fraction) varied inversely with octane number. EGAI fraction and flame propagation rate were both influenced by the magnitude of convection in the unburned gases upstream of the propagating flame caused by variation in piston timing. Experiments were accompanied by three-dimensional computational modeling with detailed chemical kinetics performed using CONVERGETM. The model results reveal low-temperature heat release and hydrogen peroxide formation in the end-gas upstream of the propagating laminar flame. Low-temperature heat release increases the temperature and degree of chain branching in the end-gas and ultimately leads to EGAI.

End-Gas Autoignition, Engine Knock, Rapid Compress↗

Phenomena in oscillating downward propagating flames induced by external laser irradiation method

Experiments in C{sub 2}H{sub 4}/CO{sub 2}-O{sub 2} premixed flames (Le < 1) propagating downwardly in a tube have been conducted to observe transition phenomena from laminar flame front to turbulent flame propagation triggered by external laser irradiation method. To investigate the exact motions of flame tip fluctuation at the initial moment of irradiating CO{sub 2} laser, the completely flat flame front is selected as a default flame, which is corresponding to the primary acoustic instability as reported by Searby (1992). According to the time-resolved observation, the flame front exposed to CO{sub 2} laser beam shows extremely unstable flame motions in which highly curved flame front towards unburned mixture is subject to diffusive-thermal instability. Then, the sudden enhanced burning state (increased flame surface) caused by flame instability induces the secondary acoustic instability which is akin to the observation in Ref. In the present study, we report the detailed descriptions of flame fronts on the transient behaviors leading the primary acoustic instability to turbulent motions actively induced by the absorption of externally irradiated CO{sub 2} laser beam. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of Laterally Propagating Flames in X-Ray Bursts. II. Realistic Burning and Rotation

In this work, we continue to investigate two-dimensional laterally propagating flames in type I X-ray bursts using fully compressible hydrodynamics simulations. In the current study we relax previous approximations where we artificially boosted the flames. We now use more physically realistic reaction rates, thermal conductivities, and rotation rates, exploring the effects of neutron star rotation rate and thermal structure on the flame. We find that at lower rotation rates the flame becomes harder to ignite, whereas at higher rotation rates the nuclear burning is enhanced by increased confinement from the Coriolis force and the flame propagates steadily. At higher crustal temperatures, the flame moves more quickly and accelerates as it propagates through the atmosphere. If the temperature is too high, instead of a flame propagating across the surface the entire atmosphere burns uniformly. Our findings could have implications for the relationship between observed burst rise times and neutron star rotation and accretion rates. All of the software used for these simulations is freely available.

79 ASTRONOMY AND ASTROPHYSICS↗

Premixed flame propagation characteristics in a supersonic airstream

Measured values of flame angles are presented to aid the design of premixed combustion chambers and prediction of flame propagation. Flame spread, velocity, and dependence of burning rate on the properties of unburned flow and on turbulence levels are compared with the measured values. The premixed flame angle is found proportional to the amount of heat released, and correlates readily with the fuel mixture ratio through the rate of heat release or rate of water formation. Finite rate combustion affects flame angle mostly at off-stoichiometric conditions. The pilot affects the flame angle if abundant unburnt fuel is present in the pilot hot gases. Viscosity runs several times over the rated level.

Agnone, A. M.↗

Fundamental mechanisms in premixed flame propagation via vortex-flame interactions: Numerical simulations

The goal of the present study is to assess numerically the ability of single-step and two-step chemical models to describe the main features encountered during the interaction between a two-dimensional vortex pair and a premixed laminar flame. In the two-step mechanism, the reaction kinetics are represented by a first chain branching reaction A + X yields 2X and a second chain termination reaction X + X yields P. This paper presents the fundamental mechanisms occurring during vortex-flame interactions and the relative impact of the major parameters encountered in turbulent premixed flames and suspected of playing a role in quenching mechanism: (1) Influence of stretch is investigated by analyzing the contribution of curvature and tangential strain on the local structure of the flame. The effect of Lewis number on the flame response to a strained field is analyzed. (2) Radiative heat losses which are suspected to be partially or totally responsible for quenching are also investigated. (3) The effect of the diffusion of the radicals is studied using a two-step mechanism in which an intermediate species is present. The parameters of the two-step mechanism are entirely determined from physical arguments. (4) Precise quantitative comparisons between the DNS and the experimental results of Samaniego et al are performed. These comparisons concern the evolution of the minimum heat release rate found along the flame front during the interaction and the distribution of the heat release rate along the flame front.

Mantel, Thierry↗

Dynamics of Laterally Propagating Flames in X-Ray Bursts. I. Burning Front Structure

We investigate the structure of laterally propagating flames through the highly stratified burning layer in an X-ray burst. Two-dimensional hydrodynamics simulations of flame propagation are performed through a rotating plane-parallel atmosphere, exploring the structure of the flame. We discuss the approximations needed to capture the length and timescales at play in an X-ray burst and describe the flame acceleration observed. Finally, our studies complement other multidimensional studies of burning in X-ray bursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Flame propagation enhancement by plasma excitation of oxygen. Part I: Effects of O{sub 3}

The thermal and kinetic effects of O{sub 3} on flame propagation were investigated experimentally and numerically by using C{sub 3}H{sub 8}/O{sub 2}/N{sub 2} laminar lifted flames. Ozone produced by a dielectric barrier plasma discharge was isolated and measured quantitatively by using absorption spectroscopy. Significant kinetic enhancement by O{sub 3} was observed by comparing flame stabilization locations with and without O{sub 3} production. Experiments at atmospheric pressures showed an 8% enhancement in the flame propagation speed for 1260 ppm of O{sub 3} addition to the O{sub 2}/N{sub 2} oxidizer. Numerical simulations showed that the O{sub 3} decomposition and reaction with H early in the pre-heat zone of the flame produced O and OH, respectively, from which the O reacted rapidly with C{sub 3}H{sub 8} and produced additional OH. The subsequent reaction of OH with the fuel and fuel fragments, such as CH{sub 2}O, provided chemical heat release at lower temperatures to enhance the flame propagation speed. It was shown that the kinetic effect on flame propagation enhancement by O{sub 3} reaching the pre-heat zone of the flame for early oxidation of fuel was much greater than that by the thermal effect from the energy contained within O{sub 3}. For non-premixed laminar lifted flames, the kinetic enhancement by O{sub 3} also induced changes to the hydrodynamics at the flame front which provided additional enhancement of the flame propagation speed. The present results will have a direct impact on the development of detailed plasma-flame kinetic mechanisms and provided a foundation for the study of combustion enhancement by O{sub 2}(a{sup 1}{delta}{sub g}) in part II of this investigation. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗