Binary counter uses fluid logic elements
Binary counter with two fluid flip-flops in each stage has an output taken from the output of the second flip-flop. The flip-flops each contain three fluid logic elements.
Source record↗
SEARCH · Search NASA
Results for “FLUID LOGIC”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Fluid logic control circuit operates nutator actuator motor
Fluid logic control circuit operates a pneumatic nutator actuator motor. It has no moving parts and consists of connected fluid interaction devices. The operation of this circuit demonstrates the ability of fluid interaction devices to operate in a complex combination of series and parallel logic sequence.
Source record↗
Review of research and development in fluid logic elements
Research and development in multistate fluid logic elements is reviewed in a historical and critical report. The report concludes that in the development of fluid amplifiers, there are elements with very high gain and poor switching speed, and other elements with very high switching speed and poor gain.
Reader, T.↗
Queuing register uses fluid logic elements
Queuing register /a multistage bit-shifting device/ uses a series of pure fluid elements to perform the required logic operations. The register has several stages of three-state pure fluid elements combined with two-input NOR gates.
Source record↗
Ferromagnetic-fluid logic devices
Logic element switches flows of low pressure process control fluid in fluidics assemblies. Device operates both electrically and fluidically and is controlled by passing permanent magnet or electromagnet over elements, thus providing proximity switching functions.
Makowski, M. J.↗
Study of pure fluid phenomena Final report, May 28 - Dec. 15, 1965
Dynamic pressure transmission in passive fluid circuits, and fluid circuit for maintaining constant pressure ratio - similarity hypothesis for fluid logic
PRESSURE RATIO↗
Flueric normal shock sensor
Design and testing of sensing elements and fluid logic circuit for shock location measurement of jet engine inlet diffuser
Egolf, D.↗
Fluid amplifier state of the art. volume i- research and development - fluid amplifiers and logic
The report surveys the current state-of-the-art of fluid amplifiers including both theoretical and practical aspects of devices having no mechanically moving parts. It is based on a complete review of the published literature (with an extensive bibliography), information obtained from 20 organizations involved in fluid amplifier development, and work performed by the General Electric Company. Specific areas covered are design techniques, both analytical and experimental; typical elements and assemblies; applications, both now in use and contemplated; fabrication techniques; and instrumentation. The report concludes that, although simple applications are now being made, the fluid amplifier field is still in the early development stage. There continues to be a basis for optimism for space applications requiring extreme environmental tolerance, long life, or the elimination of fluid system interfaces. Specialized military, and commercial applications also look promising. Work now under way should provide a better understanding of the design of devices and increase the number of useful applications.
FLUID AMPLIFICATION↗
A method for attitude control of a satellite in circular orbit by actively varying its inertia.
Equations are developed for a vehicle consisting of a system of particles which move in a generally prescribed fashion. These equations are then specialized to apply to a rigid vehicle with a constant amount of fluid contained in tanks and flowing through interconnecting lines. Various simplifications and specialized forms of the equations are derived, and relationships between mass and inertia that result from the fluid transfer logic and the physical constraints of the configuration are formulated. A tank arrangement and fluid transfer logic are devised which permit each vehicle product of inertia to be varied without varying the remaining elements of the inertia matrix or shifting the center of mass. Vehicle control is achieved by sensing angular rate and the local vertical and by transferring fluid as a function of these variables.
Clarke, W. D.↗
Development of high speed fluidic logic circuitry for a novel pneumatic stepping motor.
High speed fluidic logic circuitry for pneumatic stepping motor
MOTOR SYSTEM↗
Systems and Controls Laboratory Research Report
Fluid and fluid jet systems and controls
CONTROL SYSTEM↗
Fluidic system design. V - Practical fluid resistors.
Pressure vs flow plots of orifice, tube, porous- metal and variable resistors used in fluid amplifier and logic circuit design
FLUID SWITCHING ELEMENT↗
Geometrization of spin and the Weyssenhoff fluid conjecture
It is shown that the logical treatment of spinning perfect fluids occurs in a metric-torsion space-time with or without mass conservation. The Lagrangian formulation of a spin density fluid is reviewed, concentrating on the relationship between spin and torsion for metric-torsion space-times. The significance of the mass constraint is discussed, and its consequences for the variation of the Lagrangian is given. That consequence is the geometrization of spin; that is, the Weyssenhoff form relating spin and the trace-free torsion is obtained without any ad hoc assumption.
Smalley, L. L.↗
Fuzzy Logic Particle Tracking
A new all-electronic Particle Image Velocimetry technique that can efficiently map high speed gas flows has been developed in-house at the NASA Lewis Research Center. Particle Image Velocimetry is an optical technique for measuring the instantaneous two component velocity field across a planar region of a seeded flow field. A pulsed laser light sheet is used to illuminate the seed particles entrained in the flow field at two instances in time. One or more charged coupled device (CCD) cameras can be used to record the instantaneous positions of particles. Using the time between light sheet pulses and determining either the individual particle displacements or the average displacement of particles over a small subregion of the recorded image enables the calculation of the fluid velocity. Fuzzy logic minimizes the required operator intervention in identifying particles and computing velocity. Using two cameras that have the same view of the illumination plane yields two single exposure image frames. Two competing techniques that yield unambiguous velocity vector direction information have been widely used for reducing the single-exposure, multiple image frame data: (1) cross-correlation and (2) particle tracking. Correlation techniques yield averaged velocity estimates over subregions of the flow, whereas particle tracking techniques give individual particle velocity estimates. For the correlation technique, the correlation peak corresponding to the average displacement of particles across the subregion must be identified. Noise on the images and particle dropout result in misidentification of the true correlation peak. The subsequent velocity vector maps contain spurious vectors where the displacement peaks have been improperly identified. Typically these spurious vectors are replaced by a weighted average of the neighboring vectors, thereby decreasing the independence of the measurements. In this work, fuzzy logic techniques are used to determine the true correlation displacement peak even when it is not the maximum peak, hence maximizing the information recovery from the correlation operation, maintaining the number of independent measurements, and minimizing the number of spurious velocity vectors. Correlation peaks are correctly identified in both high and low seed density cases. The correlation velocity vector map can then be used as a guide for the particle-tracking operation. Again fuzzy logic techniques are used, this time to identify the correct particle image pairings between exposures to determine particle displacements, and thus the velocity. Combining these two techniques makes use of the higher spatial resolution available from the particle tracking. Particle tracking alone may not be possible in the high seed density images typically required for achieving good results from the correlation technique. This two-staged velocimetric technique can measure particle velocities with high spatial resolution over a broad range of seeding densities.
Source record↗
Credible Computations: Standard and Uncertainty
The discipline of computational fluid dynamics (CFD) is at a crossroad. Most of the significant advances related to computational methods have taken place. The emphasis is now shifting from methods to results. Significant efforts are made in applying CFD to solve design problems. The value of CFD results in design depends on the credibility of computed results for the intended use. The process of establishing credibility requires a standard so that there is a consistency and uniformity in this process and in the interpretation of its outcome. The key element for establishing the credibility is the quantification of uncertainty. This paper presents salient features of a proposed standard and a procedure for determining the uncertainty. A customer of CFD products - computer codes and computed results - expects the following: A computer code in terms of its logic, numerics, and fluid dynamics and the results generated by this code are in compliance with specified requirements. This expectation is fulfilling by verification and validation of these requirements. The verification process assesses whether the problem is solved correctly and the validation process determines whether the right problem is solved. Standards for these processes are recommended. There is always some uncertainty, even if one uses validated models and verified computed results. The value of this uncertainty is important in the design process. This value is obtained by conducting a sensitivity-uncertainty analysis. Sensitivity analysis is generally defined as the procedure for determining the sensitivities of output parameters to input parameters. This analysis is a necessary step in the uncertainty analysis, and the results of this analysis highlight which computed quantities and integrated quantities in computations need to be determined accurately and which quantities do not require such attention. Uncertainty analysis is generally defined as the analysis of the effect of the uncertainties involved in all stages of a process on the final responses. There are two approaches for conducting the uncertainty analysis: experimental and computational. These analyses and approaches are briefly described.
Mehta, Unmeel B.↗
Proposed test standards for nor and nand fluid digital amplifiers with some preliminary experimental results.
Dynamic testing standards for pure fluid NOR and NAND digital amplifiers covering circuits, procedures and data handling
TEST METHOD↗
Control system development for an organic Rankine cycle engine
The development of a control logic to govern the toluene throttle valve and verify the stability of the speed control approach for multiple engines connected to a 1 MWe point focus solar generator installation for distributed applications is presented. The toluene is is pumped by booster and main feed pumps through a regenerator to the parabolic focus receiver, with the flow rate controlled by a valve to remain at critical level of 4.1 MPa. The valve changes the inlet pressure at the turbine nozzle block. Each concentrator would produce 76 kWth and 20 kWe. Dynamic variables in the logic account for insolation variation, fluid temperature, ac grid voltage, the thermal dynamics of the regenerator, and variations in the head supplied by the feed pump. Separate analyses are presented for the turbine shaft speed and toluene loop dynamics. The resulting logic is considered preliminary and suitable only in full insolation conditions. Extension of the model to nonlinear perturbations is indicated.
Bergthold, F. M., Jr.↗