Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUX DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Planck intermediate results: LII. Planet flux densities

Measurements of flux density are described for five planets, Mars, Jupiter, Saturn, Uranus, and Neptune, across the six Planck High Frequency Instrument frequency bands (100-857 GHz) and these are then compared with models and existing data. In our analysis, we have also included estimates of the brightness of Jupiter and Saturn at the three frequencies of the Planck Low Frequency Instrument (30, 44, and 70 GHz). The results provide constraints on the intrinsic brightness and the brightness time-variability of these planets. The majority of the planet flux density estimates are limited by systematic errors, but still yield better than 1% measurements in many cases. Applying data from Planck HFI, the Wilkinson Microwave Anisotropy Probe (WMAP), and the Atacama Cosmology Telescope (ACT) to a model that incorporates contributions from Saturn's rings to the planet's total flux density suggests a best fit value for the spectral index of Saturn's ring system of β ring = 2.30 ± 0.03 over the 30-1000 GHz frequency range. Estimates of the polarization amplitude of the planets have also been made in the four bands that have polarization-sensitive detectors (100-353 GHz); this analysis provides a 95% confidence level upper limit on Mars's polarization of 1.8, 1.7, 1.2, and 1.7% at 100, 143, 217, and 353 GHz, respectively. The average ratio between the Planck -HFI measurements and the adopted model predictions for all five planets (excluding Jupiter observations for 353 GHz) is 1.004, 1.002, 1.021, and 1.033 for 100, 143, 217, and 353 GHz, respectively. Model predictions for planet thermodynamic temperatures are therefore consistent with the absolute calibration of Planck -HFI detectors at about the three-percent level. We compare our measurements with published results from recent cosmic microwave background experiments. In particular, we observe that the flux densities measured by Planck HFI and WMAP agree to within 2%. These results allow experiments operating in the mm-wavelength range to cross-calibrate against Planck and improve models of radiative transport used in planetary science.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

AN ACCURATE FLUX DENSITY SCALE FROM 1 TO 50 GHz

We develop an absolute flux density scale for centimeter-wavelength astronomy by combining accurate flux density ratios determined by the Very Large Array between the planet Mars and a set of potential calibrators with the Rudy thermophysical emission model of Mars, adjusted to the absolute scale established by the Wilkinson Microwave Anisotropy Probe. The radio sources 3C123, 3C196, 3C286, and 3C295 are found to be varying at a level of less than {approx}5% per century at all frequencies between 1 and 50 GHz, and hence are suitable as flux density standards. We present polynomial expressions for their spectral flux densities, valid from 1 to 50 GHz, with absolute accuracy estimated at 1%-3% depending on frequency. Of the four sources, 3C286 is the most compact and has the flattest spectral index, making it the most suitable object on which to establish the spectral flux density scale. The sources 3C48, 3C138, 3C147, NGC 7027, NGC 6542, and MWC 349 show significant variability on various timescales. Polynomial coefficients for the spectral flux density are developed for 3C48, 3C138, and 3C147 for each of the 17 observation dates, spanning 1983-2012. The planets Venus, Uranus, and Neptune are included in our observations, and we derive their brightness temperatures over the same frequency range.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Magnetic flux density in the heliosphere through several solar cycles

We studied the magnetic flux density carried by solar wind to various locations in the heliosphere, covering a heliospheric distance range of 0.3-5.4 AU and a heliolatitudinal range from 80° south to 80° north. Distributions of the radial component of the magnetic field, B{sub R} , were determined over long intervals from the Helios, ACE, STEREO, and Ulysses missions, as well as from using the 1 AU OMNI data set. We show that at larger distances from the Sun, the fluctuations of the magnetic field around the average Parker field line distort the distribution of B{sub R} to such an extent that the determination of the unsigned, open solar magnetic flux density from the average (|B{sub R} |) is no longer justified. We analyze in detail two methods for reducing the effect of fluctuations. The two methods are tested using magnetic field and plasma velocity measurements in the OMNI database and in the Ulysses observations, normalized to 1 AU. It is shown that without such corrections for the fluctuations, the magnetic flux density measured by Ulysses around the aphelion phase of the orbit is significantly overestimated. However, the matching between the in-ecliptic magnetic flux density at 1 AU (OMNI data) and the off-ecliptic, more distant, normalized flux density by Ulysses is remarkably good if corrections are made for the fluctuations using either method. The main finding of the analysis is that the magnetic flux density in the heliosphere is fairly uniform, with no significant variations having been observed either in heliocentric distance or heliographic latitude.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Long-term Longitudinal Recurrences of the Open Magnetic Flux Density in the Heliosphere

Open magnetic flux in the heliosphere is determined from the radial component of the magnetic field vector measured onboard interplanetary space probes. Previous Ulysses research has shown remarkable independence of the flux density from heliographic latitude, explained by super-radial expansion of plasma. Here we are investigating whether any longitudinal variation exists in the 50 year long OMNI magnetic data set. The heliographic longitude of origin of the plasma package was determined by applying a correction according to the solar wind travel time. Significant recurrent enhancements of the magnetic flux density were observed throughout solar cycle 23, lasting for several years. Similar, long-lasting recurring features were observed in the solar wind velocity, temperature and the deviation angle of the solar wind velocity vector from the radial direction. Each of the recurrent features has a recurrence period slightly differing from the Carrington rotation rate, although they show a common trend in time. Examining the coronal temperature data of ACE leads to the possible explanation that these long-term structures are caused by slow–fast solar wind interaction regions. A comparison with MESSENGER data measured at 0.5 au shows that these longitudinal magnetic modulations do not exist closer to the Sun, but are the result of propagation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2011

WHAT DOES A SUBMILLIMETER GALAXY SELECTION ACTUALLY SELECT? THE DEPENDENCE OF SUBMILLIMETER FLUX DENSITY ON STAR FORMATION RATE AND DUST MASS

We perform three-dimensional dust radiative transfer (RT) calculations on hydrodynamic simulations of isolated and merging disk galaxies in order to quantitatively study the dependence of observed-frame submillimeter (submm) flux density on galaxy properties. We find that submm flux density and star formation rate (SFR) are related in dramatically different ways for quiescently star-forming galaxies and starbursts. Because the stars formed in the merger-induced starburst do not dominate the bolometric luminosity and the rapid drop in dust mass and more compact geometry cause a sharp increase in dust temperature during the burst, starbursts are very inefficient at boosting submm flux density (e.g., a {approx}> 16 Multiplication-Sign boost in SFR yields a {approx}< 2 Multiplication-Sign boost in submm flux density). Moreover, the ratio of submm flux density to SFR differs significantly between the two modes; thus one cannot assume that the galaxies with highest submm flux density are necessarily those with the highest bolometric luminosity or SFR. These results have important consequences for the bright submillimeter-selected galaxy (SMG) population. Among them are: (1) The SMG population is heterogeneous. In addition to merger-driven starbursts, there is a subpopulation of galaxy pairs, where two disks undergoing a major merger but not yet strongly interacting are blended into one submm source because of the large ({approx}> 15'' or {approx}130 kpc at z = 2) beam of single-dish submm telescopes. (2) SMGs must be very massive (M{sub *} {approx}> 6 Multiplication-Sign 10{sup 10} M{sub Sun }). (3) The infall phase makes the SMG duty cycle a factor of a few greater than what is expected for a merger-driven starburst. Finally, we provide fitting functions for SCUBA and AzTEC submm flux densities as a function of SFR and dust mass and bolometric luminosity and dust mass; these should be useful for calculating submm flux density in semi-analytic models and cosmological simulations when performing full RT is computationally not feasible.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

MAGNETIC FLUX DENSITY MEASURED IN FAST AND SLOW SOLAR WIND STREAMS

The radial component of the heliospheric magnetic field vector is used to estimate the open magnetic flux density of the Sun. This parameter has been calculated using observations from the Ulysses mission that covered heliolatitudes from 80 Degree-Sign S to 80 Degree-Sign N, from 1990 to 2009 and distances from 1 to 5.4 AU, the Advanced Composition Explorer mission at 1 AU from 1997 to 2010, the OMNI interplanetary database from 1971, and the Helios 1 and 2 missions that covered the distance range from 0.3 to 1 AU. The flux density was found to be much affected by fluctuations in the magnetic field which make its calculated value dependent on heliospheric location, type of solar wind (fast or slow), and the level of solar activity. However, fluctuations are distributed symmetrically perpendicular to the average Parker direction. Therefore, distributions of the field vector in the two-dimensional plane defined by the radial and azimuthal directions in heliospheric coordinates provide a way to reduce the effects of the fluctuations on the measurement of the flux density. This leads to a better defined flux density parameter; the distributions modified by removing the effects of fluctuations then allow a clearer assessment of the dependence of the flux density on heliospheric location, solar wind type, and solar activity. This assessment indicates that the flux density normalized to 1 AU is independent of location and solar wind type (fast or slow). However, there is a residual dependence on solar activity which can be studied using the modified flux density measurements.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Gauge-invariant perturbation expansion in powers of electric charge for the density-of-states of a network model for charged-particle motion in a uniform background magnetic flux density

An explicitly gauge-invariant expansion in powers of e/$\hbar$ times the magnetic flux density is formally obtained for the density of states [as characterized by the trace of the resolvent $\hat{G}$ = (ω-$\hat{ℎ}$)-1] of a charged particle moving on a Hermitian quantum network that is embedded in a Euclidean background that supports a uniform magnetic flux density. The explicit expressions, given here up to third order in the flux density, are also valid for the “local trace” (the trace of $\hat{P}_i\hat{G}$ , where $\hat{P}_i$ is the projector on a network node) and do not appear to have been previously given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2013

Chemical sputtering of graphite by low temperature nitrogen plasmas at various substrate temperatures and ion flux densities

We report measurements of chemical sputtering yields of graphite exposed to low temperature nitrogen plasmas. The influence of surface temperature and incoming ion energy on the sputtering yields has been investigated in two distinct ion flux density regimes. Sputtering yields grow consistently with increasing temperatures in experiments with low flux density (Γ{sub i}≈10{sup 20} m{sup −2}s{sup −1}−10{sup 21} m{sup −2}s{sup −1}) and high flux density (Γ{sub i}≈10{sup 23} m{sup −2}s{sup −1}). Moreover, empirical fitting of the data suggests that the temperature of 670 °C is optimal for chemical sputtering at high flux density. Negative biasing of the samples was used to vary the ion energy in the low flux density regime. The sputtering yield in this case increases from 0.07 atoms/ion for E{sub i} = 1.5 eV to 0.19 atoms/ion for E{sub i} = 35 eV. After taking into account the dependence of the yields on temperature and ion energy, we evidenced a flux dependence of sputtering, similar to that found for chemical sputtering of carbon by hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Absolute calibration of the radio astronomy flux density scale at 22 TO 43 GHz using Planck

The Planck mission detected thousands of extragalactic radio sources at frequencies from 28 to 857 GHz. Planck's calibration is absolute (in the sense that it is based on the satellite’s annual motion around the Sun and the temperature of the cosmic microwave background), and its beams are well characterized at sub-percent levels. Thus, Planck's flux density measurements of compact sources are absolute in the same sense. We have made coordinated Very Large Array (VLA) and Australia Telescope Compact Array (ATCA) observations of 65 strong, unresolved Planck sources in order to transfer Planck's calibration to ground-based instruments at 22, 28, and 43 GHz. The results are compared to microwave flux density scales currently based on planetary observations. Despite the scatter introduced by the variability of many of the sources, the flux density scales are determined to 1%–2% accuracy. At 28 GHz, the flux density scale used by the VLA runs 2%–3% ± 1.0% below Planck values with an uncertainty of ±1.0%; at 43 GHz, the discrepancy increases to 5%–6% ± 1.4% for both ATCA and the VLA.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Series Solution for Magnetic Flux Density of Circular Current Loop and a Relevant Application

The series solution to the magnetic flux density of a circular current loop is presented in the paper. The convergences of these series are assessed. Comparing the result with elliptic integral method, the validity and feasibility of series solution were verified. A computer program has been developed by the method to calculate the magnetic flux density of a multi-coil magnet and its uniformity successfully.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2013

DETECTION AND FLUX DENSITY MEASUREMENTS OF THE MILLISECOND PULSAR J2145–0750 BELOW 100 MHz

We present flux density measurements and pulse profiles for the millisecond pulsar PSR J2145–0750 spanning 37 to 81 MHz using data obtained from the first station of the Long Wavelength Array. These measurements represent the lowest frequency detection of pulsed emission from a millisecond pulsar to date. We find that the pulse profile is similar to that observed at 102 MHz. We also find that the flux density spectrum between ≈40 MHz to 5 GHz is suggestive of a break and may be better fit by a model that includes spectral curvature with a rollover around 730 MHz rather than a single power law.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Enhanced magnetic flux density mapping using coherent steady state equilibrium signal in MREIT

Measuring the z-component of magnetic flux density B = (B{sub x}, B{sub y}, B{sub z}) induced by transversally injected current, magnetic resonance electrical impedance tomography (MREIT) aims to visualize electrical property (current density and/or conductivity distribution) in a three-dimensional imaging object. For practical implementations of MREIT technique, it is critical to reduce injection of current pulse within safety requirements. With the goal of minimizing the noise level in measured B{sub z} data, we propose a new method to enhance the measure B{sub z} data using steady-state coherent gradient multi-echo (SSC-GME) MR pulse sequence combining with injection current nonlinear encoding (ICNE) method in MREIT, where the ICNE technique injects current during a readout gradient to maximize the signal intensity of phase signal including B{sub z}. The total phase offset in SSC-GME includes additional magnetic flux density due to the injected current, which is different from the phase signal for the conventional spoiled MR pulse sequence. We decompose the magnetization precession phase from the total phase offset including B{sub z} and optimize B{sub z} data using the steady-state equilibrium signal. Results from a real phantom experiment including different kinds of anomalies demonstrated that the proposed method enhanced B{sub z} comparing to a conventional spoiled pulse sequence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Highly-­laminated, high-­saturation-flux-­density, magnetic cores for on-­chip inductors in power converter applications

The objective of this project is development of a manufacturing process to realize thick highly-laminated metallic magnetic cores with suppressed eddy current losses for power applications and demonstration of integrated magnetic components using the process. The continual reduction in size and increase in functionality of portable electronic devices drives the development of ultracompact electrical power converters and therefore their associated inductors, which typically occupy the largest volume within the converter. This inductor size reduction can be achieved by increasing both the converter switching frequency as well as inductor operating flux density by utilizing appropriate magnetic core materials. Magnetically soft metallic alloys (e.g., NiFe and CoNiFe) are good core material candidates due to their superior magnetic properties (e.g., high saturation flux density and low coercivity) compared to conventional ferrite. However, to minimize eddy current losses, the core thickness is limited to the skin depth (typically less than 3 µm for 10 MHz operation); cores of this thickness are likely insufficient for handling high power (> 10W). Therefore, there is great interest in the development of highly-laminated metallic alloy cores with single lamination thickness in the sub-micron range to achieve suppressed eddy-current losses and high power handling capacity simultaneously. During the project, highly-laminated metallic alloy cores comprising up to 2000 layers of permalloy (Ni 80 Fe 20 ) or CoNiFe materials with single lamination thickness less than 1 µm have been fabricated based on automated multilayer electrodeposition technology compatible with CMOS manufacturing. The developed highly-laminated metallic cores preserve the high saturation flux density and low coercivity characteristics of metallic alloys, while suppressing eddy-current losses less than 1 W/cm3 at operation flux density of 0.5 T and frequency over 1 MHz. The developed highly-laminated metallic alloy cores have been further integrated into microfabricated windings to realize compact, on-chip inductors. Utilizing CMOS-compatible integration techniques, circular (toroid) and bar-shape (solenoid) microinductors have been fabricated exhibiting a constant inductance higher than 1 µH up to 50 MHz with peak quality factor as high as 35 at 5 MHz. The microfabricated inductor with highly-laminated core was tested in a power converter and demonstrated a converter efficiency of 93% at 5.5 MHz and 42 W under 100V input and 35V output operation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Korean VLBI Network Calibrator Survey (KVNCS). 1. Source Catalog of KVN Single-dish Flux Density Measurement in the K and Q Bands

We present the catalog of the KVN Calibrator Survey (KVNCS). This first part of the KVNCS is a single-dish radio survey simultaneously conducted at 22 ( K band) and 43 GHz ( Q band) using the Korean VLBI Network (KVN) from 2009 to 2011. A total of 2045 sources are selected from the VLBA Calibrator Survey with an extrapolated flux density limit of 100 mJy at the K band. The KVNCS contains 1533 sources in the K band with a flux density limit of 70 mJy and 553 sources in the Q band with a flux density limit of 120 mJy; it covers the whole sky down to −32.°5 in decl. We detected 513 sources simultaneously in the K and Q bands; ∼76% of them are flat-spectrum sources (−0.5 ≤ α ≤ 0.5). From the flux–flux relationship, we anticipated that most of the radiation of many of the sources comes from the compact components. The sources listed in the KVNCS therefore are strong candidates for high-frequency VLBI calibrators.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Development of a vector-tensor system to measure the absolute magnetic flux density and its gradient in magnetically shielded rooms

Several experiments in fundamental physics demand an environment of very low, homogeneous, and stable magnetic fields. For the magnetic characterization of such environments, we present a portable SQUID system that measures the absolute magnetic flux density vector and the gradient tensor. This vector-tensor system contains 13 integrated low-critical temperature (LTc) superconducting quantum interference devices (SQUIDs) inside a small cylindrical liquid helium Dewar with a height of 31 cm and 37 cm in diameter. The achievable resolution depends on the flux density of the field under investigation and its temporal drift. Inside a seven-layer mu-metal shield, an accuracy better than ±23 pT for the components of the static magnetic field vector and ±2 pT/cm for each of the nine components of the gradient tensor is reached by using the shifting method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2012

ATLBS EXTENDED SOURCE SAMPLE: THE EVOLUTION IN RADIO SOURCE MORPHOLOGY WITH FLUX DENSITY

Based on the Australia Telescope Low Brightness Survey (ATLBS) we present a sample of extended radio sources and derive morphological properties of faint radio sources. One hundred nineteen radio galaxies form the ATLBS Extended Source Sample (ATLBS-ESS) consisting of all sources exceeding 30'' in extent and integrated flux densities exceeding 1 mJy. We give structural details along with information on galaxy identifications and source classifications. The ATLBS-ESS, unlike samples with higher flux-density limits, has almost equal fractions of FR-I and FR-II radio galaxies, with a large fraction of the FR-I population exhibiting 3C31-type structures. Significant asymmetry in lobe extents appears to be a common occurrence in the ATLBS-ESS FR-I sources compared with FR-II sources. We present a sample of 22 FR-Is at z > 0.5 with good structural information. The detection of several giant radio sources, with size exceeding 0.7 Mpc, at z > 1 suggests that giant radio sources are not less common at high redshifts. The ESS also includes a sample of 28 restarted radio galaxies. The relative abundance of dying and restarting sources is indicative of a model where radio sources undergo episodic activity in which an active phase is followed by a brief dying phase that terminates with restarting of the central activity; in any massive elliptical a few such activity cycles wherein adjacent events blend may constitute the lifetime of a radio source and such bursts of blended activity cycles may be repeated over the age of the host. The ATLBS-ESS includes a 2 Mpc giant radio galaxy with the lowest surface brightness lobes known to date.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

An Approximate Analytic Expression for the Flux Density of Scintillation Light at the Photocathode

The flux density of light exiting scintillator crystals is an important factor affecting the performance of radiation detectors, and is of particular importance for position sensitive instruments. Recent work by T. Woldemichael developed an analytic expression for the shape of the light spot at the bottom of a single crystal [1]. However, the results are of limited utility because there is generally a light pipe and photomultiplier entrance window between the bottom of the crystal and the photocathode. In this study, we expand Woldemichael s theory to include materials each with different indices of refraction and compare the adjusted light spot shape theory to GEANT 4 simulations [2]. Additionally, light reflection losses from index of refraction changes were also taken into account. We found that the simulations closely agree with the adjusted theory.

Braverman, Joshua B↗
DOE OSTI2012

QUENCHING STAR FORMATION AT INTERMEDIATE REDSHIFTS: DOWNSIZING OF THE MASS FLUX DENSITY IN THE GREEN VALLEY

The bimodality in galaxy properties has been observed at low and high redshifts, with a clear distinction between star-forming galaxies in the blue cloud and passively evolving objects in the red sequence; the absence of galaxies with intermediate properties indicates that the quenching of star formation and subsequent transition between populations must happen rapidly. In this paper, we present a study of over 100 transiting galaxies in the so-called green valley at intermediate redshifts (z {approx} 0.8). By using very deep spectroscopy with the DEIMOS instrument at the Keck telescope we are able to infer the star formation histories of these objects and measure the stellar mass flux density transiting from the blue cloud to the red sequence when the universe was half its current age. Our results indicate that the process happened more rapidly and for more massive galaxies in the past, suggesting a top-down scenario in which the massive end of the red sequence is forming first. This represents another aspect of downsizing, with the mass flux density moving toward smaller galaxies in recent times.

79 ASTRONOMY AND ASTROPHYSICS↗