Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUX MAPPING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Adjustment of footprint correction for airborne flux mapping over the FIFE site

A meaningful interpretation of airborne flux estimates over nonuniform terrain must consider local advection from nonhomogeneous source distributions (footprint correction). An empirical procedure for footprint correction of airborne flux data obtained in the First ISLSCP Field Experiment (FIFE) 1989 is presented, based on simple analytical solutions of the diffusion equation which have been adjusted to approximate more realistic solutions. Optimized estimates of surface flux 'maps' derived from airborne observations are then constructed for maximum correlation between flux estimates and independently observed surface characteristics. This paper also includes an analysis of resolution for the given procedure, in terms of amplitude recovery of hypothetical square-wave distributions of surface flux density, and discusses its implications for the interpretation of the optimized estimates of FIFE surface flux maps. Results show that corrected spatial sink distributions are obtained by the current empirical procedure at the cost of considerable reduction in amplitude recovery of small-scale variations in surface flux density. The high spatial correlation observed between corrected flux maps and surface characteristics such as greenness or surface temperature excess is ascribed to the approximately correct positioning of the main flux gradients across the site, which can be expected to have been reproduced with amplitude recovery equal to or greater than 60 percent.

Schuepp, P. H.↗
DOE OSTI2015

Protocluster discovery in tomographic Ly α forest flux maps

Here, we present a new method of finding protoclusters using tomographic maps of Ly α forest flux. We review our method of creating tomographic flux maps and discuss our new highperformance implementation, which makes large reconstructions computationally feasible. Using a large N-body simulation, we illustrate how protoclusters create large-scale flux decrements, roughly 10 h -1 Mpc across, and how we can use this signal to find them in flux maps. We test the performance of our protocluster finding method by running it on the ideal, noiseless map and tomographic reconstructions from mock surveys, and comparing to the halo catalogue. Using the noiseless map, we find protocluster candidates with about 90 per cent purity, and recover about 75 per cent of the protoclusters that form massive clusters (>3 × 10 14 h -1 M ⊙ ). We construct mock surveys similar to the ongoing COSMOS Lyman-Alpha Mapping And Tomography Observations survey. While the existing data have an average sightline separation of 2.3 h -1 Mpc, we test separations of 2-6 h -1 Mpc to see what can be tolerated for our application. Using reconstructed maps from small separation mock surveys, the protocluster candidate purity and completeness are very close to what was found in the noiseless case. As the sightline separation increases, the purity and completeness decrease, although they remain much higher than we initially expected. We extended our test cases to mock surveys with an average separation of 15 h -1 Mpc, meant to reproduce high source density areas of the Baryon Oscillation Spectroscopic Survey. Finally, we find that even with such a large sightline separation, the method can still be used to find some of the largest protoclusters.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Detecting Hot Spots of Methane Flux Using Footprint‐Weighted Flux Maps

Abstract In this study, we propose a new technique for mapping the spatial heterogeneity in gas exchange around flux towers using flux footprint modeling and focusing on detecting hot spots of methane (CH 4 ) flux. In the first part of the study, we used a CH 4 release experiment to evaluate three common flux footprint models: the Hsieh model (Hsieh et al., 2000), the Kljun model (Kljun et al., 2015), and the K & M model (Kormann and Meixner, 2001), finding that the K & M model was the most accurate under these conditions. In the second part of the study, we introduce the Footprint‐Weighted Flux Map, a new technique to map spatial heterogeneity in fluxes. Using artificial CH 4 release experiments, natural tracer approaches and flux chambers we mapped the spatial flux heterogeneity, and detected and validated a hot spot of CH 4 flux in a oligohaline restored marsh. Through chamber measurements during the months of April and May, we found that fluxes at the hot spot were on average as high as 6589 ± 7889 nmol m −2 s −1 whereas background flux from the open water were on average 15.2 ± 7.5 nmol m −2 s −1 . This study provides a novel tool to evaluate the spatial heterogeneity of fluxes around eddy‐covariance towers and creates important insights for the interpretation of hot spots of CH 4 flux, paving the way for future studies aiming to understand subsurface biogeochemical processes and the microbiological conditions that lead to the occurrence of hot spots and hot moments of CH 4 flux.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

Using Green's Functions to Compute 3 Dimensional Neutron Flux Maps - 16016

The knowledge of the radionuclide content of radioactive waste is of utmost importance for safety and waste management reasons. Numerical simulations are used by EDF-DP2D to anticipate dismantling and radioactive waste management. The main numerical activation schemes include the computing of a 3 dimensional neutron flux map, obtained on the basis of a neutron propagation calculation. The codes used solve the transport equation called the Boltzmann equation without simplification. The Monte Carlo method is used to solve the Boltzmann equation. Random series of numbers are used to simulate the lives of millions of neutrons. The codes follow each neutron individually, from its birth to its disappearance by leakage, absorption, or fission, and then the neutron flux map is calculated at the nominal power rating conditions. The main drawback of the Monte Carlo codes is the large computing time needed to converge within acceptable statistical criteria. This extended time period is incompatible with the multiple fuel managements used by EDF to operate its NPPs because it is necessary to make a Monte Carlo calculation for each fuel loading pattern. The solution developed by EDF-DP2D is to use the importance factors of Green's Functions to simplify the computing of the 3 dimensional neutron flux maps. Physicists talk about Green's Functions where mathematicians talk about elementary solutions of linear equations with constant coefficients. With an activation scheme based on the Green's Functions approach the 3D neutron flux is obtained on the basis of the convolution of the normalized source contributions (i.e. normalized response matrices) with the neutrons emitted by the fuel assemblies. The response matrices to unitary sources are computed with the Monte Carlo code MCNP for different tallies of interest and the neutron sources emitted by the fuel are computed with a core code for different fuel loading patterns. The principal interest of this approach is the calculation of the response matrices to unitary sources that can be used for all power distributions, thus limiting the Monte Carlo computing time. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2013

Development of a new flux map processing code for moveable detector system in PWR

This paper presents an introduction to the development of the flux map processing code MAPLE developed by China Nuclear Power Technology Research Institute (CNPPJ), China Guangdong Nuclear Power Group (CGN). The method to get the three-dimensional 'measured' power distribution according to measurement signal has also been described. Three methods, namely, Weight Coefficient Method (WCM), Polynomial Expand Method (PEM) and Thin Plane Spline (TPS) method, have been applied to fit the deviation between measured and predicted results for two-dimensional radial plane. The measured flux map data of the LINGAO nuclear power plant (NPP) is processed using MAPLE as a test case to compare the effectiveness of the three methods, combined with a 3D neutronics code COCO. Assembly power distribution results show that MAPLE results are reasonable and satisfied. More verification and validation of the MAPLE code will be carried out in future. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Constructing the Nitrogen Flux Maps (NFMs) of Plants

The main objectives of this project are to construct plant N flux maps (NFMs) from plant genomes and to determine functionality of AT enzymes and plant N metabolic network. To address this grand challenge, this project made use of rapidly growing numbers of plant genomes, high-throughput functional characterization platforms, and computational modeling to deduce both biochemical and systems level functionality of ATs and NFMs. The obtained NFMs will provide a novel framework to advance basic understanding of plant N metabolism and facilitate rational engineering of plants with high productivity even under limited N input.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

The panchromatic hubble andromeda treasury. XVII. Examining obscured star formation with synthetic ultraviolet flux maps in M31

We present synthetic far- and near-ultraviolet (FUV and NUV) maps of M31, both with and without dust reddening. These maps were constructed from spatially resolved star formation histories (SFHs) derived from optical Hubble Space Telescope imaging of resolved stars, taken as part of the Panchromatic Hubble Andromeda Treasury program. We use stellar population synthesis modeling to generate synthetic UV maps with a spatial resolution of ∼100 pc (∼24 arcsec), projected. When reddening is included, these maps reproduce all of the main morphological features in the GALEX imaging, including rings and large star-forming complexes. The predicted UV flux also agrees well with the observed flux, with median ratios between the modeled and observed flux of log{sub 10}(f{sub FUV}{sup syn}/f{sub FUV}{sup obs})=0.03±0.24 and log{sub 10}(f{sub NUV}{sup syn}/f{sub NUV}{sup obs})=−0.03±0.16 in the FUV and NUV, respectively. This agreement is particularly impressive given that we used only optical photometry to construct these UV maps. Having verified the synthetic reddened maps, we use the dust-free maps to examine properties of obscured flux and star formation. We compare our dust-free and reddened maps of FUV flux with the observed GALEX FUV flux and FUV + 24 μm flux to examine the fraction of obscured flux. We find that the maps of synthetic flux require that ∼90% of the FUV flux in M31 is obscured by dust, while the GALEX -based methods suggest that ∼70% of the FUV flux is absorbed by dust. This 30% increase in the estimate of the obscured flux is driven by significant differences between the dust-free synthetic FUV flux and that derived when correcting the observed FUV flux for dust absorption with 24 μm emission observations. The difference is further illustrated when we compare the SFRs derived from the FUV + 24 μm flux with the 100 Myr average SFR from the CMD-based SFHs. We find that the 24 μm corrected FUV flux underestimates the SFR by a factor of 2.3–2.5, depending on the chosen calibration. This discrepancy could be reduced by allowing for variability in the weight applied to the 24 μm data, as has been recently suggested in the literature.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Estimating interfacial thermal conductivity in metamaterials through heat flux mapping

The variability of the thickness as well as the thermal conductivity of interfaces in composites may significantly influence thermal transport characteristics and the notion of a metamaterial as an effective medium. The consequent modulations of the heat flux passage are analytically and experimentally examined through a non-contact methodology using radiative imaging, on a model anisotropic thermal metamaterial. It was indicated that a lower Al layer/silver interfacial epoxy ratio of ∼25 compared to that of a Al layer/alumina interfacial epoxy (of ∼39) contributes to a smaller deviation of the heat flux bending angle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Comprehensive sequence-flux mapping of a levoglucosan utilization pathway in E. coli

Synthetic metabolic pathways often suffer from low specific productivity, and new methods that quickly assess pathway functionality for many thousands of variants are urgently needed. Here we present an approach that enables the rapid and parallel determination of sequence effects on flux for complete gene-encoding sequences. We show that this method can be used to determine the effects of over 8000 single point mutants of a pyrolysis oil catabolic pathway implanted in Escherichia coli . Experimental sequence-function data sets predicted whether fitness-enhancing mutations to the enzyme levoglucosan kinase resulted from enhanced catalytic efficiency or enzyme stability. A structure of one design incorporating 38 mutations elucidated the structural basis of high fitness mutations. One design incorporating 15 beneficial mutations supported a 15-fold improvement in growth rate and greater than 24-fold improvement in enzyme activity relative to the starting pathway. Lastly, this technique can be extended to improve a wide variety of designed pathways.

09 BIOMASS FUELS↗
NASA NTRS1993

Advanced electric motor technology flux mapping

Design of electric motors which fulfill the needs of Thrust Vector Control (TVC) actuators used in large rocket propelled launch vehicles is covered. To accomplish this end the methodology of design is laid out in some detail. In addition a point design of a motor to fulfill the requirements of a certain actuator specified by MSFC is accomplished and reported upon. In the course of this design great stress has been placed on ridding the actuator of internally generated heat. To conduct the heat out of the motor use is made of the unique properties of the in house MSFC designed driving electronics. This property is that as along as they are operated in a quasi-linear mode the electronics nullify the effects of armature inductance as far as the phase of the armature current versus the rotor position is concerned. Actually the additional inductance due to the extended end turns in this design is of benefit because in the shorted armature failure mode the armature current in the fault (caused by the rotor flux sweeping past the armature) is diminished at a given rotor speed when compared to a more conventional motor with lower inductance. The magnetic circuit is analyzed using electromagnetic finite element methods.

Doane, George B., III↗