Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORESTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Comparison of sugar content for ionic liquid pretreated Douglas-fir woodchips and forestry residues

The development of affordable woody biomass feedstocks represents a significant opportunity in the development of cellulosic biofuels. Primary woodchips produced by forest mills are considered an ideal feedstock, but the prices they command on the market are currently too expensive for biorefineries. In comparison, forestry residues represent a potential low-cost input but are considered a more challenging feedstock for sugar production due to complexities in composition and potential contamination arising from soil that may be present. We compare the sugar yields, changes in composition in Douglas-fir woodchips and forestry residues after pretreatment using ionic liquids and enzymatic saccharification in order to determine if this approach can efficiently liberate fermentable sugars. : These samples were either mechanically milled through a 2 mm mesh or pretreated as received with the ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate [C 2 mim][OAc] at 120°C and 160°C. IL pretreatment of Douglas-fir woodchips and forestry residues resulted in approximately 71-92% glucose yields after enzymatic saccharification. X-ray diffraction (XRD) showed that the pretreated cellulose was less crystalline after IL pretreatment as compared to untreated control samples. Two-dimensional nuclear magnetic resonance spectroscopy (2D-NMR) revealed changes in lignin and hemicellulose structure and composition as a function of pretreatment. Mass balances of sugar and lignin streams for both the Douglas-fir woodchips and forestry residues throughout the pretreatment and enzymatic saccharification processes are presented. While the highest sugar yields were observed with the Douglas-fir woodchips, reasonably high sugar yields were obtained from forestry residues after ionic liquid pretreatment. Structural changes to lignin, cellulose and hemicellulose in the woodchips and forestry residues of Douglas-fir after [C 2 mim][OAc] pretreatment are analyzed by XRD and 2D-NMR, and indicate that significant changes occurred. Irrespective of the particle sizes used in this study, ionic liquid pretreatment successfully allowed high glucose yields after enzymatic saccharification. These results indicate that forestry residues may be a more viable feedstock than previously thought for the production of biofuels.

59 BASIC BIOLOGICAL SCIENCES↗

Climate change impacts on US agriculture and forestry: benefits of global climate stabilization

Increasing atmospheric carbon dioxide levels, higher temperatures, altered precipitation patterns, and other climate change impacts have already begun to affect US agriculture and forestry, with impacts expected to become more substantial in the future. There have been numerous studies of climate change impacts on agriculture or forestry, but relatively little research examining the long-term net impacts of a stabilization scenario relative to a case with unabated climate change. We provide an analysis of the potential benefits of global climate change mitigation for US agriculture and forestry through 2100, accounting for landowner decisions regarding land use, crop mix, and management practices. The analytic approach involves a combination of climate models, a crop process model (EPIC), a dynamic vegetation model used for forests (MC1), and an economic model of the US forestry and agricultural sector (FASOM-GHG). We find substantial impacts on productivity, commodity markets, and consumer and producer welfare for the stabilization scenario relative to unabated climate change, though the magnitude and direction of impacts vary across regions and commodities. Although there is variability in welfare impacts across climate simulations, we find positive net benefits from stabilization in all cases, with cumulative impacts ranging from $32.7 billion to $54.5 billion over the period 2015-2100. Our estimates contribute to the literature on potential benefits of GHG mitigation and can help inform policy decisions weighing alternative mitigation and adaptation actions.

agricultural modeling↗

An integrated assessment of the potential of agricultural and forestry residues for energy production in China

Biomass has been widely recognized as an important energy source with high potential to reduce greenhouse gas emissions while minimizing environmental pollution. In this study, we employ the Global Change Assessment Model to estimate the potential of agricultural and forestry residue biomass for energy production in China. Potential availability of residue biomass as an energy source was analyzed for the 21st century under different climate policy scenarios. Currently, the amount of total annual residue biomass, averaged over 2003-2007, is around 15519PJ in China, consisting of 10818PJ from agriculture residues (70%) and 4701PJ forestry residues (30%). We estimate that 12693PJ of the total biomass is available for energy production, with 66% derived from agricultural residue and 34% from forestry residue. Most of the available residue is from south central China (3347PJ), east China (2862PJ) and south-west China (2229PJ), which combined exceeds 66% of the total national biomass. Under the reference scenario without carbon tax, the potential availability of residue biomass for energy production is projected to be 3380PJ by 2050 and 4108PJ by 2095, respectively. When carbon tax is imposed, biomass availability increases substantially. For the CCS 450ppm scenario, availability of biomass increases to 9002PJ (2050) and 11524PJ (2095), respectively. For the 450ppm scenario without CCS, 9183 (2050) and 11150PJ (2095) residue biomass, respectively, is projected to be available. Moreover, the implementation of CCS will have a little impact on the supply of residue biomass after 2035. Our results suggest that residue biomass has the potential to be an important component in China's sustainable energy production portfolio. As a low carbon emission energy source, climate change policies that involve carbon tariff and CCS technology promote the use of residue biomass for energy production in a low carbon-constrained world.

bioenergy↗

Global and regional potential for bioenergy from agricultural and forestry residue biomass

As co-products, agricultural and forestry residues represent a potential low cost, low carbon, source for bioenergy. A method is developed method for estimating the maximum sustainable amount of energy potentially available from agricultural and forestry residues by converting crop production statistics into associated residue, while allocating some of this resource to remain on the field to mitigate erosion and maintain soil nutrients. Currently, we estimate that the world produces residue biomass that could be sustainably harvested and converted into over 50 EJ yr-1 of energy. The top three countries where this resource is estimated to be most abundant are currently net energy importers: China, the United States (US), and India. The global potential from residue biomass is estimated to increase to approximately 80-95 EJ yr-1 by mid- to late- century, depending on physical assumptions such as of future crop yields and the amount of residue sustainably harvestable. The future market for biomass residues was simulated using the Object-Oriented Energy, Climate, and Technology Systems Mini Climate Assessment Model (ObjECTS MiniCAM). Utilization of residue biomass as an energy source is projected for the next century under different climate policy scenarios. Total global use of residue biomass is estimated to increase to 70-100 EJ yr-1 by mid- to late- century in a central case, depending on the presence of a climate policy and the economics of harvesting, aggregating, and transporting residue. Much of this potential is in developing regions of the world, including China, Latin America, Southeast Asia, and India.

09 BIOMASS FUELS↗

Valorisation of forestry waste by pyrolysis in an auger reactor

Pyrolysis of forestry waste has been carried out in an auger reactor to study the influence of operational variables on the reactor performance and the properties of the related products. Pine woodchips were used for the first time as raw material and fed continuously into the reactor. Ten experiments were carried out under inert atmosphere at: (i) different reaction temperature (1073, 973, 873, 823 and 773 K); (ii) different solid residence time (5, 3, 2 and 1.5 min); and (iii) different biomass flow rate (3.9, 4.8 and 6.9 kg/h). Results show that the greatest yields for liquid production (59%) and optimum product characterisation were obtained at the lowest temperature studied (773 K) and applying solid residence times longer than 2 min. Regarding bio-oil properties, GC/MS qualitative identification show that the most abundant compounds are volatile polar compounds, phenols and benzenediols; and very few differences can be observed among the samples regardless of the pyrolysis operating conditions. On the whole, experimental results demonstrate that complete reaction of forest woodchips can be achieved in an auger reactor in most of the experimental conditions tested. Moreover, this study presents the initial steps for the future scaling up of the auger reactor with the aim of converting it into a mobile plant which will be able to remotely process biomass such as energy crops, forestry and agricultural wastes to obtain bio-oil that, in turn, can be used as energy vector to avoid high transport costs.

09 BIOMASS FUELS↗

Application of remote sensing in forestry

The use of remote sensing techniques in forestry studies is investigated. In particular, inventory, monitoring, detection, and management are discussed. Data show that infrared imagery appears to be the best technique for forestry studies. Data also show that color photographs are more easily interpreted than black and white ones.

Lauer, D. T.↗

The utility of ERTS-1 data for applications in agriculture and forestry

A comprehensive study has been undertaken to determine the extent to which ERTS-1 data could be used to detect, identify (classify), locate and measure features of applications interest in the disciplines of Agriculture and Forestry. The study areas included: six counties in five states in which were located examples of the most important crops and practices of American agriculture; and a portion of the Sam Houston National Forest, a typical Gulf coastal plain pine forest. The investigation utilized conventional image interpretation and computer-aided (spectral pattern recognition) analysis using both image products and computer compatible tapes. The emphasis was generally upon the computer-aided techniques. It was concluded that ERTS-1 data can be used to detect, identify, locate and measure a wide array of features of interest in agriculture and forestry.

Erb, R. B.↗

A new image enhancement algorithm with applications to forestry stand mapping

The theory and applications are presented of a new image enhancement algorithm which refines computer classification maps of multispectral data. The refinement eliminates connected sets smaller than a prespecified size and merges them to the surrounding area. Conventional practices in forestry timber stand mapping requires small geographic areas to be absorbed by surrounding large areas to form homogeneous stands. This homogeneity is often incompatible with the statistical formulation of homogeneity. Elements within a timber stand which should be labeled as one feature often correspond to more than one class mapped by existing computer classification techniques. The new algorithm is designed to postprocess classification maps to result in more usable timber stand maps. The new image enhancement technique is compared with an accepted neighbor-checking postprocessing technique, demonstrating the superiority of the new technique for forestry stand mapping.

Kan, E. P.↗

Agriculture, forestry, and other land-use emissions in Latin America

Nearly 40% of greenhouse gas (GHG) emissions in Latin America were from agriculture, forestry, and other land use (AFOLU) in 2008, more than double the global fraction of AFOLU emissions. In this paper, we investigate the future trajectory of AFOLU GHG emissions in Latin America, with and without efforts to mitigate, using a multi-model comparison approach. We find significant uncertainty in future emissions with and without climate policy. This uncertainty is due to differences in a variety of assumptions including (1) the role of bioenergy, (2) where and how bioenergy is produced, (3) the availability of afforestation options in climate mitigation policy, and (4) N 2 O and CH 4 emissions intensity. With climate policy, these differences in assumptions can lead to significant variance in mitigation potential, with three models indicating reductions in AFOLU GHG emissions and one model indicating modest increases in AFOLU GHG emissions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Global population structures and demographic history of Suillus luteus, a pine co‐introduced ectomycorrhizal fungus associated with exotic forestry and invasion

Human colonization since the 19th century has resulted in the global spread of pines beyond their original northern boreal distribution. Although the introduction history of pines is documented through historical records, little is known about the introduction history of their ectomycorrhizal (ECM) fungi, which are critical symbionts for the survival and invasion of pines. Using Suillus luteus as an example, whole genomes of 208 individuals collected across native and introduced ranges were sequenced to reveal the introduction history of pine co-introduced ECM fungi. Population genomics analyses showed that all introductions originated from Europe. With the exception of North America, introduced populations were genetically differentiated from the European population, with varying magnitudes of population expansion in different introduced regions. Genetic variation within the native European population followed isolation by distance, but not in the introduced range, highlighting the disparity in the spatial-genetic patterns of native vs exotic habitats. The spread of S. luteus is mediated by human activities accompanying pine introductions, with its demographic history linked to forestry practices. The spatial, temporal, and demographic patterns observed in S. luteus offer insight into the population genetics of a widely introduced ECM fungus and are likely applicable to other pine co-introduced ECM fungi.

Ke, Yi‐Hong↗

Dendrometer data at The Morton Arboretum Forestry Plots 2019-2023

We are collecting long-term dendrometer data at The Morton Arboretum to determine seasonal growth patterns in trees. This data on stem growth patterns will eventually be integrated with other ongoing data streams to paint a broader picture of plant phenology. This data package contains the outputs from three types of dendrometer devices: ICT band dendrometer data is in the "ICT_data2020_2023.csv" file, TreeHugger band dendrometer data is in the "TreeHugger_data2019_2020.csv" file, and TOMST point dendrometer data is in the "TOMST_data2021_2023.csv" file. The TreeHugger and TOMST files contain corrected and raw uncorrected values, whereas the ICT data file contains only raw data. Initial tree size data at device installation is located in the "Initial_Tree_Size.csv" file. Additional information on units are contained within each data file's respective data dictionary, and the location metadata file contains the geographic locations of the 23 forestry plots at The Morton Arboretum as well as the measured tree species at each location.

54 ENVIRONMENTAL SCIENCES↗