Heat of formation of boron trichloride /bcl3/ special report
Formation heat of boron trichloride
CHLORIDE↗
SEARCH · Search NASA
Results for “FORMATION HEAT”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Accurate Heats of Formation for PHn, PHn+, and PHn-
Accurate heats of formation are computed for PHn and PHn+, for n=1-3, and for PHn-, for n= 1-2. The geometries and vibrational frequencies are determined at the B3LYP level of theory. The energetics are determined at the CCSD(T) level of theory. Basis set limit values are obtained by extrapolation. Spin-orbit effects are taken from experiment. The temperature dependence of the heat of formation, heat capacity, and entropy are computed for the temperature range 300 to 4000 K and fit to a polynomial.
Ricca, Alessandra↗
Heat of Formation of CH2OH
The heat of formation of CH2OH at 298 K is determined to be -15.2 +/- 3.5 kJ/mol using high levels of theory. This is in good agreement with some recent experimental determinations. The assignment of the error bars is discussed in detail and compared with that assigned in previous theoretical calculations. The largest uncertainty arises from the calculation of the zero-point energy.
Bauschlicher, Charles W., Jr.↗
The Heats of Formation of SiCl+n, for n=1-4
The heats of formation of SiCl(sub n) and SiCl+(sub n), for n=1-4, have been determined using the G2(B3LYP/MP2/CC) approach. The results for the neutral systems are in very good agreement with previous work. High level calibration calculations show that ion results have about the same accuracy as the neutrals, and allow us to refine the G2(B3LYP/MP2/CC) values. The calculations show that the adiabatic IP of SiCl4 is about 7 kcal/mol smaller than the accepted value. Using a rigid rotor/harmonic oscillator approximation, the temperature dependence of the heat of formation, heat capacity, and entropy are computed for 300 to 4000 K and fit to a polynomial.
Bauschlicher, Charles W., Jr.↗
Accurate Heats of Formation for SFn, SFn+, and SFn- for n=1-6
Accurate heats of formation are computed for SFn, SFn+, and SFn-, for n=1-6. The geometries and vibrational frequencies are determined at the B3LY-P level of theory. The energetics are determined at the CCSD(T) level of theory. Extrapolation to the basis set limit is discussed. The temperature dependence of the heat of formation, heat capacity, and entropy are computed for the temperature range 300 to 4000 approx. K and fit to a polynomial.
Bauschlicher, Charles W., Jr.↗
Accurate Heats of Formation for SiF(n) and SiF(n+), for N=1-4
Accurate heats of formation are computed for SiFn and SiFn+, for n=1-4. The vibrational frequencies are determined at the B3LYP level of theory. The energetics are determined at the CCSD(T) level of theory. Basis set limit values are obtained by extrapolation. In those cases where the CCSD(T) calculations become prohibitively large, the basis set extrapolation is performed at the MP2 level. The temperature dependence of the heat of formation, heat capacity, and entropy are computed for the temperature range 300 to 4000 K and fit to a polynomial. The CCSD(T) bond energies are compared with those obtained at the B3LYP, MP2, G2, and G2MP2 levels of theory.
Bauschlicher, Charles W., Jr.↗
Heats of Formation and Bond Energies in Group III Compounds
We present heats of formation and bond energies for Group-III compounds obtained from calculations of molecular ground-state I electronic energies. Data for compounds of the form MXn are presented, where M = B, Al, Ga, and In, X = He H, Cl, and CH3, and n = 1-3. Energies for the B, Al, and Ga compounds are obtained from G2 predictions, while those for the In compounds are obtained from CCSD(T)/CBS calculations; these are the most accurate calculations for indium-containing compounds published to date. In most cases, the calculated thermochemistry is in good agreement with published values derived from experiments for those species that have well-established heats of formation. Bond energies obtained from the heats of formation follow the expected trend (Cl much greater than CH3 approx. H). However, the CH3M-(CH3)2 bond energies obtained for trimethylgallium and trimethylindium are considerably stronger (greater than 15 kcal/mol) than currently accepted values.
Bauschlicher, Charles W., Jr.↗
Determination of Highly Accurate Heats of Formation
Two approaches for directly computing a molecular heat of formation based on sophisticated ab initio electronic structure theory axe discussed and example calculations are presented for several molecules of interest in atmospheric chemistry including HNO and CICN. The accuracy of these approaches for a small subset of the molecules is demonstrated by comparison to very accurate experimental data. A third approach for evaluating accurate heats of formation consists of combining experimental and theoretical data. The potential for this method to provide reliable thermochemical data on many molecules using accurate experimental beats of formation for only a small number of species is demonstrated by giving accurate (Delta)H(sup 0, sub f) quantities for a host of fluorine, chlorine, and bromine oxide and nitrogen oxide compounds. Potential pitfalls in all three approaches are discussed.
Lee, Timothy J.↗
Heats of Formation for CF(sub n) (n = 1 - 4), CF(sup +, sub n) (n = 1 - 4), and CF(sup -, sub n) (n = 1 - 3)
Accurate heats of formation are computed for CF(sub n) (n = 1 - 4), CF(sup +, sub n) (n = 1 - 4), and CF(sup -, sub n) (n = 1 - 3). The geometries and vibrational frequencies are determined at the B3LYP level of theory. The energetics are determined at the CCSD(T) level of theory. Basis set limit values are obtained by extrapolation. In those cases where the CCSD(T) calculations become prohibitively large, the basis set extrapolation is performed at the MP2 level. The temperature dependence of the heat of formation, heat capacity, and entropy are computed for the temperature range 300 to 4000 K and fit to a polynomial.
Ricca, Alessandra↗
Heats of Formation for Cyclic C4Fn, n=4-8, and their Cations
Heats of formation for cyclic C4F8 and C4F8+ are determined at the G3MP2 level. The several decomposition pathways are investigated. The calculations confirm that C4F8+ rearranges and its decomposition is responsible for both the C2F4+ and C3F5+ species observed in experiment. The heats of formation are presented for C4Fn and C4Fn+, n = 4-8.
Bauschlicher, Charles W., Jr.↗
The Heats of Formation of GaCl3 and its Fragments
The heats of formation of GaC13 and its fragments are computed. The geometries and frequencies are obtained at the B3LYP level. The CCSD(T) approach is used to solve the correlation problem. The effect of Ga 3d correlation is studied, and found to affect the bond energies by up to 1 kcal/mol. Both basis set extrapolation and bond functions are considered as ways to approach the basis set limit. Spin-orbit and scalar relativistic effects are also considered.
Bauschlicher, Charles W., Jr.↗
Temperature-Dependent Kinetics Studies of the Reactions Br((sup 2)P3/2) + H2S yields SH + HBr and Br((sup 2)P3/2) + CH3SH yields CH3S + HBr. Heats of Formation of SH and CH3S Radicals
Time resolved resonance fluorescence detection of Br(sup 2)P3/2) atom disappearance or appearance following 266-nm laser flash photolysis of CF2Br2/H2S/H2/N2, CF2Br2/CH3SH/H2/N2, Cl2CO/H2S/HBr/N2, and CH3SSCH3/HBr/H2/N2 mixtures has been employed to study the kinetics of the reactions Br((sup 2)P3/2) + H2S = SH + HBr (1,-1) and Br((sup2)P3/2) + CH3SH = CH3S + HBr (2, -2) as a function of temperature over the range 273-431K. Arrhenius expressions in units of 10(exp -12) cu cm/molecule/s which describe the results are k1 = (14.2 +/- 3.4) exp[(-2752 +/- 90)/T],(k-1) = (4.40 +/- 0.92) exp[(-971 +/- 73)/T],k(2) = (9.24 +/- 1.15) exp[(-386 +/- 41)/T], and k(-2) = (1.46 +/-0.21) exp[(-399 +/-41)/T; errors are 2 sigma and represent precision only. By examining Br((sup 2)P3/2) equilibrium kinetics following 355nm laser flash photolysis of Br2/CH3SH/H2/N2 mixtures, a 298 K rate coefficient of (1.7 +/- 0.5) x 10(exp -10) cu cm/molecule/s has been obtained for the reaction CH3S + Br2 yields CH3SBr + Br. To our knowledge, these are the first kinetic data reported for each of the reactions studied. Measured rate coefficients, along with known rate coefficients for similar radical + H2S, CH3SH, HBr,Br2 reactions are considered in terms of possible correlations of reactivity with reaction thermochemistry and with IP - EA, the difference between the ionization potential of the electron donor and the electron affinity of the electron acceptor. Both thermochemical and charge-transfer effects appear to be important in controlling observed reactivities. Second and third law analyses of the equilibrium data for reactions 1 and 2 have been employed to obtain the following enthalpies of reaction in units of kcal/mol: for reaction 1, Delta-H(298) = 3.64 +/- 0.43 and Delta-H(0) = 3.26 +/-0.45; for reaction 2, Delta-H(298) = -0.14 +/- 0.28 and Delta-H(0) = -0.65 +/- 0.36. Combining the above enthalpies of reaction with the well-known heats of formation of Br, HBr, H2S, and CH3SH gives the following heats of formation for the RS radicals in units of kcal/mol: Delta-H(sub f)(sub 0)(SH) = 34.07 +/- 0.72, Delta-H(sub f)(sub 298)(SH) = 34.18 +/- 0.68, Delta-H(sub f)(sub 0)(CH3S) = 31.44 +/- 0.54, Delta-H(sub f)(sub 298)(CH3S) = 29.78 +/- 0.44; errors are 2 sigma and represent estimates of absolute accuracy. The SH heat of formation determined from our data agrees well with literature values but has reduced error limits compared to other available values. The CH3S heat of formation determined from our date is near the low end of the range of previous estimates and is 3-4 kcal/mol lower than values derived from recent molecular beam photofragmentation studies.
Nicovich, J. M.↗
Experimental and analytical investigation of energy transfer to gas bubbles during formation.
Heat transfer to nitrogen from baths of distilled water and ethyl alcohol during bubble formation from submerged orifice
GAS-LIQUID INTERACTION↗
Accurate ab Initio Quartic Force Fields, Vibrational Frequencies, and Heats of Formation for FCN, FNC, ClCN, and ClNC
The XCN and XNC (X = F, Cl) isomers have been investigated using the CCSD(T) method in conjunction with correlation consistent basis sets. Equilibrium geometries, harmonic frequencies, anharmonic constants, fundamental frequencies, and heats of formation have been evaluated. Agreement with experiment for the fundamental frequencies is very good, even for nu(sub 2), for CICN, which is subject to a strong Fermi resonance with 2nu(sub 3). It is also shown that a second-order perturbation theory approach to solving the nuclear Schroedinger equation gives results in excellent agreement with essentially exact variational calculations. This is true even for nu(sub 2) of ClCN, provided that near-singular terms are eliminated from the perturbation theory formulas and the appropriate Fermi interaction energy matrix is then diagonalized. A band at 615/cm, tentatively assigned as the Cl-N stretch in ClNC in matrix isolation experiments, is shown not to be due to ClNC. Accurate atomization energies are determined and are used to evaluate accurate heats of formation (3.1 +/- 1.5, 33.2 +/- 1.5, 72.6 +/- 1.5, and 75.9 +/- 1.5 kcal/mol for FCN, ClCN, FNC, and ClNC, respectively). It is expected that the theoretical heats of formation for FCN, FNC, and ClNC are the most accurate available.
Lee, Timothy J.↗
Twin solution calorimeter determines heats of formation of alloys at high temperatures
Calvert-type, twin liquid metal solution calorimeter determines the heats of formation of transition metal alloys at high temperatures. The twin differential calorimeter measures the small heat effects generated over extended periods of time, has maximum operating temperature of 1073 degrees K and an automatic data recording system.
Darby, J. B., Jr.↗
Heat of formation determination of the ground and excited state of cyanomethylene (HCCN) radical
Ab initio electronic structure theory has been used to characterize the structure of the ground triplet and lowest singlet excited states of cyanomethylene. The geometries, vibrational frequencies, and heats of formation have been determined using second-order Moller-Plesset perturbation, single and double excitation configuration interaction, and quadratic configuration interaction theory. The heat of formation is predicted with isodesmic reaction and Gaussian-2 theory (G2) for the ground triplet and first excited singlet states of cyanomethylene. For the ground state Delta-H(sub 0)(sup f,0) is 114.8+/-2 kcal/mol while for the excited single state it is 126.5+/-2 kcal/mol.
Francisco, Joseph S.↗
Temperature-Dependent Kinetics Studies of the Reactions Br((sup 2)P(sub 3/2)) + CH3SCH3 reversible reaction CH3SCH2 + HBr. Heat of Formation of the CH3SCH2 Radical
Time-resolved resonance fluorescence detection of Br((sup 2)P(sub 3/2)) atom disappearance or appearance 266 nm laser flash photolysis of CF2Br2/CH3SCH3/H2/N2 and Cl2CO/CH2SCH3/HBr/H2/N2 mixtures has been employed to study the kinetics of the reactions Br((sup 2)P(sub 3/2)) + CH3SCH3 reversible reaction HBr + CH3SCH2 (1,-1) as a function of temperature over the range 386-604 K. Arrhenius expressions in units of cu cm/molecule which describe the results are k3= (9.0 +/- 2.9) x 10 (exp -11) exp[(-2386 +/- 151)/T]; errors are 2 sigma and represent precision only. To our knowledge, these are the first kinetic data reported for each of the two reactions studied. Second and third law analyses of the equilibrium data for reactions 1 and -1 have been employed to obtain the following enthalpies of reaction in units of kcal/mol: Delta-H(298) = 6.11 +/- 1.37 and Delta-H(0) = 5.37 +/- 1.38. Combining the above enthalpies of reaction with the well-known heats of formation of Br, HBr, CH3SCH3 gives the following heats of formation of the CH3SCH2 radical in units of kcal/mol: Delta-H(sub(f,298)) = 32.7 +/- 1.4 and Delta-H(sub (f,0)) = 35.3 +/- 1.4; errors are 2 sigma and represent estimates of absolute accuracy. The C-H bond dissociation energy in CH3SCH3 obtained from our data, 93.7 +/- 1.4 kcal/mol at 298 K and 92.0 +/- 1.4 kcal at 0 k, agrees well with a recent molecular beam photofragmentaion study but is 3 kcal/mol lower than the value obtained from an iodination kinetics study.
Jefferson, A.↗
Heats of formation and thermodynamic functions for C2H, C3H, and C4H from 300 K to 6000 K
A review of the energy level and heat of formation data for the species C2H, C3H, and C4H is given. The procedure for computing thermochemical data from partition function is also reviewed. Working expressions for approximate partition functions, free-energy function, enthalpy function, and heat capacity for a linear polyatomic species are presented.
Saturno, A. F.↗