Search NASA⌕ Search

SEARCH · Search NASA

Results for “FR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Optical and X-ray studies of chromospherically active stars: FR Cancri, HD 95559 and LO Pegasi

We present a multiwavelength study of three chromospherically active stars, namely FR Cnc (= BD +16 degrees 1753), HD 95559 and LO Peg (=BD +22 degrees 4409), including newly obtained optical photometry, (for FR Cnc) low-resolution optical spectroscopy, as well as archival IR and X-ray observations. The BVR photometry carried out during the years 2001 - 2004 has found significant photometric variability to be present in all three stars. For FR Cnc, a photometric period 0.826685 +/- 0.000034 d has been established. The strong variation in the phase and amplitude of the FR Cnc light curves when folded on this period implies the presence of evolving and migrating spots or spot groups on its surface. Two independent spots with migration periods of 0.97 and 0.93 years respectively are inferred. The photometry of HD 95559 suggests the formation of a spot (group) during the interval of our observations. We infer the existence of two independent spots or groups in the photosphere of LO Peg, one of which has a migration period of 1.12 years. The optical spectroscopy of FR Cnc carried out during 2002-2003, reveals the presence of strong and variable Ca I1 H and K, H(sub beta) and H(sub alpha) emission features indicative of high level of chromospheric activity. The value of 5.3 for the ratio of the excess emission in H(sub alpha) to H(sub beta), EH(sub alpha)/EH(sub beta), suggests that the chromospheric emission may arise from an extended off-limb region. We have searched for the presence of color excesses in the near-IR JHK bands of these stars using 2MASS data, but none of them appear to have any significant color excess. We have also analyzed archival X-ray observations of HD 95559 and LO Peg carried out by with the ROSAT observatory. The best fit models to their X-ray spectra imply the presence of two coronal plasma components of differing temperatures and with sub-solar metal abundances. The inferred emission measures and temperatures of these systems are similar to those found for other active dwarf stars. The kinematics of FR Cnc suggest that it is a very young (35 - 55 Myrs) main-sequence star and a possible member of the IC 2391 supercluster. LO Peg also has young disk-type kinematics and has been previously suggested to be a member of the 100 Mys old Local Association (Pleiades Moving Group). The kinematics of HD 95559 indicate it is a possible member of the 600 Myrs old Hyades supercluster.

Pandey, J. C.↗
NASA NTRS2020

TURBOMAT-FR: Turbomachinery Aeroelastic Forced Response Analysis Automation Using MATLAB®: PART 1

The primary aim of this effort is to develop a software tool named “Turbomachinery Aeroelastic Analysis Tool for Forced Response (TURBOMAT-FR)” using MATLAB® (The MathWorks, Inc.) scripts. The tool will aid in performing routine forced response analysis of turbomachinery fan blades with the aid of the modal summation method (MSUM). The MSUM approach requires a modal solution consisting of modal displacements, modal frequencies, and modal stresses. The MATLAB® scripts facilitate easy extraction of the required quantities from the computational fluid dynamics (CFD) and MSC Nastran (Hexagon AB) solution files. These quantities are subsequently utilized by the MSUM approach to perform a complete forced response analysis.The MATLAB® scripts in TURBOMAT-FR are utilized in postprocessing of the MSC Nastran finite element analysis outputs in three types of solutions or steps, namely (1) stresses and displacements from static and steady response solution, (2) unsteady stresses and displacements from direct forced response solution, and (3) modal solution containing modal displacements and modal stresses. In step (4), separate MATLAB® scripts are also developed to read the processed outputs in step (3) and perform forced response analysis using MSUM. The TURBOMAT-FR MATLAB® scripts mentioned previously are presented in two reports designated “Part 1” and “Part 2”. The current report, Part 1, presents the scripts needed to accomplish steps (1) and (2), noted previously. This will be exclusively useful for performing only the static and steady response analysis and the forced response analysis using the direct forced response solution approach. Part 2 contains the TURBOMAT-FR MATLAB® scripts needed to accomplish steps (3) and (4). The MATLAB® scripts given in Part 2 facilitate the calculation of unsteady stresses using MSUM and provide an automated procedure associated with aeroelastic forced response analysis with different pressure files for the same structural model. The unsteady stresses calculated using MSUM in Part 2 can be compared with those presented in Part 1. A cantilevered blade-alone model subjected to a realistic pressure loading to a boundary was used for static and unsteady direct forced response analysis to demonstrate the effectiveness of the TURBOMATFR MATLAB® scripts.

MATLAB-Scripts↗
NASA NTRS2020

TURBOMAT-FR: Turbomachinery Aeroelastic Forced Response Analysis Automation Using MATLAB® Part 2

The primary aim of this effort is to develop a software tool named “Turbomachinery Aeroelastic Analysis Tool for Forced Response (TURBOMAT-FR)” using MATLAB® (The MathWorks, Inc.) scripts. The tool will aid in performing routine forced response analysis of turbomachinery fan blades with the aid of the modal summation method (MSUM). The MSUM approach requires a modal solution consisting of modal displacements, frequencies, and stresses. The MATLAB® scripts facilitate easy extraction of the required quantities from the computational fluid dynamics (CFD) and MSC Nastran (Hexagon AB) solution files. These quantities are subsequently utilized by the MSUM approach to perform a complete forced response analysis using the MATLAB® scripts. The MATLAB® scripts in TURBOMAT-FR are utilized in postprocessing of the MSC Nastran finite element analysis outputs in three types of solutions or steps, namely (1) stresses and displacements from static or steady response solution, (2) unsteady stresses and displacements from direct forced response solution, and (3) modal solution containing modal displacements and modal stresses. In step (4), separate MATLAB® scripts are also developed to read the processed outputs in step (3) and perform forced response analysis using MSUM. It should be noted that the direct forced response solution from step (2) will provide for a comparison with those obtained from the MSUM approach in steps (3) and (4). The TURBOMAT-FR MATLAB® scripts mentioned previously are presented in two reports designated Parts 1 and 2. Part 1 presents the scripts needed to accomplish steps (1) and (2). The current report, Part 2, presents the scripts needed to accomplish steps (3) and (4), noted previously. The TURBOMAT-FR MATLAB® scripts provided here in Part 2 facilitate the calculation of unsteady stresses using MSUM and provide an automated procedure associated with aeroelastic forced response analysis with different pressure files. The unsteady stresses calculated using MSUM can be compared with those presented in Part 1. A cantilevered blade-alone model subjected to a realistic pressure loading to a boundary was used for static and unsteady direct forced response analysis to demonstrate the effectiveness of the TURBOMATFR MATLAB® scripts.

T S R Reddy↗
NASA NTRS2005

Decelerating Flows in TeV Blazars: A Resolution to the BL Lac -- FR I Unification Problem

TeV emission from BL Lacertae (BL) objects i s commonly modeled as Synchrotron-Self Compton (SSC) radiation from relativistically moving homogeneous plasma blobs. In the context of these models, the blob Lorentz factors needed to reproduce the corrected for absorption by the diffuse IR background (DIRB) TeV emission are large ($\delta \gtrsim 50$). The main reason for this is that stronger beaming eases the problem of the lack of $\sim$ IR-UV synchrotron seed photons needed to produce the de-absorbed $\sim $ few TeV peak of the spectral energy distribution (SED). However, such high Doppler factors are in strong disagreement with the unified scheme, according to which BLs are FR I radio galaxies with their jets closely aligned to the line of sight. Here, motivated by the detection of sub-luminal velocities in the sub-pc scale jets of the best studied TeV blazars, MKN 421 and MKN 501, we examine the possibility that the relativistic flows in the TeV BLs decelerate. In this case, the problem of the missing seed photons is solved because of Upstream Compton (UC) scattering, a process in which the upstream energetic electrons from the fast base of the flow 'see' the synchrotron seed photons produced in the slow part of the flow relativistically beamed. Modest Lorentz factors ($\Gamma \sim 15$), decelerating down to values compatible with the recent radio interferometric observations, reproduce the $\sim $ few TeV peak energy of these sources. Furthermore, such decelerating flows are shown to be in agreement with the BL - FR I unification, naturally reproducing the observed BL/FR I broadband luminosity ratios.

Kazanas, Demosthenes↗
NASA NTRS1966

DSIF FR-900 video recorders

Deep Space Instrumentation Facility FR-900 ROTARY head magnetic tape recorders for acquiring video data from lunar orbiter

MAGNETIC TAPE RECORDER↗
NASA NTRS1947

Tests of Submerged Duct Installation on the Ryan FR-1 Airplane in the Ames 40- by 80-Foot Wind Tunnel

An investigation of an NACA submerged intake installation on the Ryan FR-1 was conducted to determine the full-scale aerodynamic characteristics of this installation. In addition, tests were conducted on the submerged inlet with revised entrance lips and deflectors to determine the configuration which would result in the best dynamic pressure recovery measured at the inlet for this installation without a major rework of the entrance. Stalling of the air flow over the inner lip surface created excessive dynamic pressure losses with the original entrance. The revised entrance produced a 12-percent increase in dynamic pressure recovery at the design high-speed inlet-velocity ratio and resulted in an improvement of thte critical-speed characteristics of the entrance lip. A complete redesign of the entrance including a decrease in ramp angle and adjustment of lip camber is necessary to secure optimum results from this submerged duct installation.

Martin, Norman J.↗
NASA NTRS2004

An Exploratory Study of Cost Engineering in Axiomatic Design: Creation of the Cost Model Based on an FR-DP Map

Large complex projects cost large sums of money throughout their life cycle for a variety of reasons and causes. For such large programs, the credible estimation of the project cost, a quick assessment of the cost of making changes, and the management of the project budget with effective cost reduction determine the viability of the project. Cost engineering that deals with these issues requires a rigorous method and systematic processes. This paper introduces a logical framework to a&e effective cost engineering. The framework is built upon Axiomatic Design process. The structure in the Axiomatic Design process provides a good foundation to closely tie engineering design and cost information together. The cost framework presented in this paper is a systematic link between the functional domain (FRs), physical domain (DPs), cost domain (CUs), and a task/process-based model. The FR-DP map relates a system s functional requirements to design solutions across all levels and branches of the decomposition hierarchy. DPs are mapped into CUs, which provides a means to estimate the cost of design solutions - DPs - from the cost of the physical entities in the system - CUs. The task/process model describes the iterative process ot-developing each of the CUs, and is used to estimate the cost of CUs. By linking the four domains, this framework provides a superior traceability from requirements to cost information.

Lee, Taesik↗
NASA NTRS2014

Geostationary Coastal and Air Pollution Events (GeoCAPE) Filter Radiometer (FR)

The GeoCAPE Filter Radiometer (FR) Study is a different instrument type than all of the previous IDL GeoCape studies. The customer primary goals are to keep mass, volume and cost to a minimum while meeting the science objectives and maximizing flight opportunities by fitting on the largest number of GEO accommodations possible. Minimize total mission costs by riding on a commercial GEO satellite. For this instrument type, the coverage rate, km 2 min, was significantly increased while reducing the nadir ground sample size to 250m. This was accomplished by analyzing a large 2d area for each integration period. The field of view will be imaged on a 4k x 4k detector array of 15 micrometer pixels. Each ground pixel is spread over 2 x 2 detector pixels so the instantaneous field of view (IFOV) is 2048 X 2048 ground pixels. The baseline is, for each field of view 50 sequential snapshot images are taken, each with a different filter, before indexing the scan mirror to the next IFOV. A delta would be to add additional filters.

Geo Cape↗
NASA NTRS1995

Faraday rotation fluctutation spectra observed during solar occultation of the Helios spacecraft

Faraday rotation (FR) measurements using linearly polarized radio signals from the two Helios spacecraft were carried out during the period from 1975 to 1984. This paper presents the results of a spectral analysis of the Helios S-band FR fluctuations observed at heliocentric distances from 2.6 to 15 solar radii during the superior conjunctions 1975-1983. The mean intensity of the FR fluctuations does not exceed the noise level for solar offsets greater than ca. 15 solar radii. The rms FR fluctuation amplitude increases rapidly as the radio ray path approaches the Sun, varying according to a power law (exponent: 2.85 +/- 0.15) at solar distances 4-12 solar radii. At distances inside 4 solar radii the increase is even steeper (exponent: 5.6 +/- 0.2). The equivalent two-dimensional FR fluctuation spectrum is well modeled by a single power-law over the frequency range from 5 to 50 mHz. For heliocentric distances larger than 4 solar radii the spectral index varies between 1.1 and 1.6 with a mean value of 1.4 +/- 0.2, corresponding to a 3-D spectral index p = 2.4. FR fluctuations thus display a somwhat lower spectral index compared with phase and amplitude fluctuations. Surprisingly high values of the spectral index were found for measurements inside 4 solar radii (p = 2.9 +/- 0.2). This may arise from the increasingly dominant effect of the magnetic field on radio wave propagation at small solar offsets. Finally, a quasiperiodic component, believed to be associated with Alfven waves, was discovered in some (but not all!) fluctuation spectra observed simultaneously at two ground stations. Characteristic periods and bulk velocities of this component were 240 +/- 30 sec and 300 +/- 60 km/s, respectively.

Andreev, V.↗
NASA NTRS2010

Use of Modal Acoustic Emission to Monitor Damage Progression in Carbon Fiber/Epoxy Tows and Implications for Composite Structures

ASTM-based ILH methods were found to give a reproducible, quantitative estimate of the stress threshold at which significant accumulated damage began to occur. a) FR events are low energy (<2 V(exp 20 microsec) b) FR events occur close to the observed failure locus. c) FR events consist of more than 30% fiber breakage (>300 kHz) d) FR events show a consistent hierarchy of cooperative damage for composite tow, and for the COPV tested, regardless of applied load. Application of ILH or related stress profiles could lead to robust pass/fail acceptance criteria based on the FR. Initial application of FR and FFT analysis of AE data acquired on COPVs is promising.

Waller, Jess M.↗
NASA NTRS2017

Prominence Eruption Initiated by Helical Kink Instability of an Embedded Flux Rope

We study the triggering mechanism of a limb-prominence eruption and the associated coronal mass ejection (CME) near AR 12342 using Solar Dynamics Observatory and Large Angle and Spectrometric Coronagraph/Solar Heliospheric Observatory observations. The prominence is seen with an embedded flux thread (FT) at one end and bifurcates from the middle to a different footpoint location. The morphological evolution of the FT is similar to that of an unstable flux rope (FR), which we regard as a prominence-embedded FR. The FR twist exceeds the critical value. In addition, the morphology of the prominence plasma in 304 Å images marks the helical nature of the magnetic skeleton, with a total of 2.96 turns along arc length. The potential field extrapolation model indicates that the critical height of the background magnetic field gradient falls within the inner corona (105 Mm), which is consistent with the extent of coronal plasma loops. These results suggest that the helical kink instability in the embedded FR caused the slow rise of the prominence to the height of the torus instability domain. Moreover, the differential emission measure analysis unveils heating of the prominence plasma to coronal temperatures during an eruption, suggesting reconnection-related heating underneath the upward rising embedded FR. The prominence starts with a slow rise motion of 10 km s(exp. -1), which is followed by fast and slow acceleration phases that have an average acceleration of 28.9 m s(exp. -2) and 2.4 m s(exp. -2) in C2 and C3 field of view, respectively. As predicted by previous numerical simulations, the observed synchronous kinematic profiles of the CME leading edge and the core support the involved FR instability in the prominence initiation.

Vemareddy, P.↗
NASA NTRS1987

Standards of conduct for NASA employees

'Standards of Conduct' for employees (14 CFR Part 1207) is set forth in this handbook and is hereby incorporated in the NASA Directives System. This handbook incorporates, for the convenience of NASA employees, the regulations now in effect prescribing standards of conduct for NASA employees. These regulations set forth the high ethical standards of conduct required of NASA employees in carrying out their duties and responsibilities. These regulations have been approved by the Office of Government Ethics, Office of Personnel Management. The regulations incorporated in this handbook were first published in the Federal Register on October 21, 1967 (32 FR 14648-14659); Part B concerning the acceptance of gifts, gratuities, or entertainment was extensively revised on January 19, 1976 (41 FR 2631-2633) to clarify and generally to restrict the exceptions to the general rule against the acceptance by a NASA employee from persons or firms doing or seeking business with NASA. Those regulations were updated on January 29, 1985 (50 FR 3887) to ensure conformity to the Ethics in Government Act of 1978 regarding the public financial disclosure statement. These regulations were published in the Federal Register on June 16, 1987 (52 FR 22755-764) and a correction was printed on Sept. 28, 1987 (52 FR 36234).

John E O'Brien↗