Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREE FLIGHT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

High pressure gas storage system consumable analyses for ALT flights free flight 1 and free flight 6

Consumables analyses are presented for the high pressure gas storage oxygen (O2), and hydrogen (H2) reactant systems for orbiter vehicle 101 approach and landing tests, for two flights, free flight 1 and free flight 6 are given. The consumables analyses are based on average power data. The required system and mission data updates were made in order to perform the analyses, notably the thermal environment profiles of the reactant storage cylinders and the power profile for the Electrical power subsystem. No mission-dependent environment profiles were provided; therefore, nominal free flight mission profile was used to generate environment profiles for free flights 1 and 6.

Hurst, J. E.↗
NASA NTRS1999

Performance Modeling of a Pilot in a Free Flight Mode: A Free Flight Self-Separation Cancellations Due to the Requirement for Procedural Intervention - 1

Developments are being made that allow pilots to have more flexibility over the control of their aircraft. This new concept is called Free Flight. Free Flight strives to move the current air traffic system into an age where space technology is used to its fullest potential. Self-separation is one part of the Free Flight system. Self-separation provides pilots the opportunity to choose their own route to reach a specified destination provided that they maintain the 'minimum required separation distance between airplanes. In the event that pilots are unable to maintain separation, controllers will need to have the aircraft separation authority passed back to them. This situation is known as a procedural intervention point. This project attempted to examine and diagnose those particular situations in an effort to avoid reaching a procedural intervention point in the near future. Crews that reached procedural intervention points were compared with crews that made similar maneuver types in the same scenario, but did not reach procedural intervention points. Results showed that there were no significant differences between crews in a high-density acute angle flight conditions. However, significant differences in maneuver times, following the detection of an intruder aircraft and following the time the intruder aircraft came into view, were found in a low-density, acute angle scenario.

Ntuen, Celestine A.↗
NASA NTRS2020

Experimental Investigation of Drag Modulation Aerocapture: Drag-Skirt Separation in Hypersonic Free Flight

Free flight tests were conducted in carbon dioxide at Mach 12 of notional drag modulation aerocapture configurations for a small satellite mission to Venus. The configurations were based on research conducted at the Georgia Institute of Technology, University of Colorado Boulder, Jet Propulsion Laboratory, and Ames Research Center. The drag modulation aerocapture approach being studied involves an atmospheric entry vehicle that employs an attached drag device, a drag skirt, that is jettisoned at the appropriate time to allow the payload-portion of the vehicle to exit the atmosphere, slowed enough to be captured into orbit. A total of eight tests were performed. Reynolds numbers, based on the pre-separation base diameter, ranged from 0.82 x 106 to 2.96 x 106. The tests demonstrated the feasibility of a clean drag skirt separation at hypersonic speeds and, for the conditions of the tests, the stability of the central flight system body during and after separation from the drag skirt. Two drag skirt geometries were tested: an axisymmetric conical frustum, and a faceted frustum representative of a mechanically-deployable device. Drag skirts of various masses were tested to examine the effect of pre- and post-separation ballistic coefficient ratio on the separation dynamics. A new test capability for multi-body interactions in hypersonic free flight was developed for these tests, and is described.

aerocapture↗
NASA NTRS2019

Free-Flight CFD Simulations of Ballistic Range and Flight Tests

Free-Flight CFD capability has been implemented into the finite-volume solver US3D under the Entry Systems Modeling project. Several simulations of ballistic range experiments have been performed in order to validate the simulation software and methodology. Extension of the software to flight scale trajectories with varying freestream conditions has been carried out. Results show promising ability to predict vehicle behavior as compared to flight. Finally, a multi-body free-flight capability has been developed to generalize the single-body free-flight solver to study multiple bodies in proximal flight.

Brock, Joseph M.↗
NASA NTRS2006

Aft-End Flow of a Large-Scale Lifting Body During Free-Flight Tests

Free-flight tests of a large-scale lifting-body configuration, the X-38 aircraft, were conducted using tufts to characterize the flow on the aft end, specifically in the inboard region of the vertical fins. Pressure data was collected on the fins and base. Flow direction and movement were correlated with surface pressure and flight condition. The X-38 was conceived to be a rescue vehicle for the International Space Station. The vehicle shape was derived from the U.S. Air Force X-24 lifting body. Free-flight tests of the X-38 configuration were conducted at the NASA Dryden Flight Research Center at Edwards Air Force Base, California from 1997 to 2001.

Banks, Daniel W.↗
NASA NTRS1993

Instrumentation and telemetry systems for free-flight drop model testing

This paper presents instrumentation and telemetry system techniques used in free-flight research drop model testing at the NASA Langley Research Center. The free-flight drop model test technique is used to conduct flight dynamics research of high performance aircraft using dynamically scaled models. The free-flight drop model flight testing supplements research using computer analysis and wind tunnel testing. The drop models are scaled to approximately 20 percent of the size of the actual aircraft. This paper presents an introduction to the Free-Flight Drop Model Program which is followed by a description of the current instrumentation and telemetry systems used at the NASA Langley Research Center, Plum Tree Test Site. The paper describes three telemetry downlinks used to acquire the data, video, and radar tracking information from the model. Also described are two telemetry uplinks, one used to fly the model employing a ground-based flight control computer and a second to activate commands for visual tracking and parachute recovery of the model. The paper concludes with a discussion of free-flight drop model instrumentation and telemetry system development currently in progress for future drop model projects at the NASA Langley Research Center.

Hyde, Charles R.↗
NASA NTRS1955

Development of a high-velocity free-flight launcher : the Ames light-gas gun

Recent interest in long-range missiles has stimulated a search for new experimental techniques which can reproduce in the laboratory the high temperatures and Mach numbers associated with the missiles' flight. One promising possibility lies in free-flight testing of laboratory models which are flown at the full velocity of the missile. In this type of test, temperatures are approximated and aerodynamic heating of the model is representative of that experienced by the missile in high-velocity flight. A prime requirement of the free-flight test technique is a device which had the capacity for launching models at the velocities desired. In response to thie need, a gun firing light models at velocities up to 15,000 feet per second has been developed at the Ames Aeronautical Laboratory. The design of this gun, the analysis of its performance, and the results of the initial firing trials are described in this paper. The firing trials showed that the measured velocities and pressures agreed well with the predicted values. Also, the erosion of the launch tube was very small for the eleven rounds fired. The performance of the gun suggests that it will prove to be a satisfactory launcher for high-velocity free-flight tests. However, it should be mentioned that only the gross performance has been evaluated so far, and, consequently, the operation of the gun must be investigated in further detail before its performance can be reliably predicted over its full operating range.

Charters, A C↗
NASA NTRS1971

Transonic free-flight model testing at large scale

The use of free flight models for transonic testing at high Reynolds numbers is discussed. Several specific examples of experimental investigations are briefly reviewed to illustrate the scope of research that can be conducted by utilizing the advantages of free flight models. These advantages are primarily the lack of interference or constraints imposed by test facilities and model support systems and the dynamic freedom possessed by free flight models. High Reynolds numbers are obtained by using large models flown at relatively low altitudes. It is shown that models 10 meters or more in length will be required for research at Reynolds numbers sufficiently high to provide representative simulation of flow conditions for large modern aircraft. Several methods for launching models of this size are discussed. These methods include free drops from airplanes or balloons and ground launches with the use of internal or external rocket motors. All the launching methods discussed have been successfully demonstrated on flight vehicles of the size and weight required to attain the necessary test conditions.

Gillis, C. L.↗
NASA NTRS1999

Transitioning from Free-Flight to TRACON Airspace: The Ground Perspective of User-Preferred Descents

Free-flight is considered to play a major role in the future air traffic environment. Studies are underway addressing different concepts for free-flight and self separation in enroute airspace. One common opinion throughout the different concepts is that the airspace surrounding major airports, the Terminal Radar Approach CONtrol (TRACON) will not be a free flight area. This means that aircraft in this area are completely controlled by air traffic controllers, who may be supported by decision support system like the Center TRACON Automation System (CTAS). How the transition from the free-flight area (enroute airspace) to the terminal area will take place is currently unclear, This paper describes a study at NASA Ames Research Center addressing the perspective of air traffic controllers handling user-preferred (FMS-optimized) descent trajectories during this transition phase. Two major issues in enabling user preferred descents from the controllers' point of view are predictability and controllability. In an environment in which the air traffic services are highly responsive to user preferences controllers need to know, where and when aircraft will change their trajectory and they need to have appropriate means and procedures at hand to control the aircraft according to the overall traffic situation. Predictability shall be enhanced by: 1) Indicating airspace corridors for descending aircraft; 2) Modify the controller interface; 3) Using a ground based conflict probe; 4) Making use of downlinked intent information from the aircraft FMS; and 5) Requiring to fly pilots on user preferred trajectories coupled to the FMS in the lateral and vertical axis. Additional controllability shall be achieved by supporting the controllers with CTAS center tools: 1) Traffic Management Advisor (TMA); 2) Conflict Probing and Trial Planning (CP/TP); and 3) Enroute Descent Advisor (E/DA). The paper describes the general concept and the modifications to current systems required to enable the concept. It explains the experiment design and discusses the results with regard to controller acceptability and usability. Potential benefits and drawbacks of the overall concept are indicated.

Prevot, Thomas↗
NASA NTRSDate not supplied

Free-Flight CFD Simulations and Dynamic StabilityAnalysis of the Orion Crew Module

Dynamic stability analysis of the Multi-Purpose Crew Vehicle (MPCV) is performed us-ing the US3D flow solver and a plugin library to solve rigid-body dynamics, Free-Flight CFD(FF-CFD). Previous efforts investigated the free-flight behavior of higher speed, open-backaeroshell shapes. Three primary experimental sources are used to evaluate the predictivecapability of the FF-CFD solver in the low supersonic range (Mach≈1). First, the ballisticrange results obtained at the HFFAF facility at NASA Ames is used to verify the six degree-of-freedom (6-DoF) dynamic capability of the FF-CFD solver. Next, FF-CFD simulationsare preformed using restricted motion and the resultant trajectories are post-processed toobtain pitch damping coefficient as a function of angle-of-attack. The comparison of thepitch damping results obtained with one degree-of-freedom (1-DoF) FF-CFD compare wellwith experimental fits derived from ballistic range data. Finally, the atmospheric flight ca-pability of FF-CFD is compared to data from the Ascent Abort-2 (AA-2) flight experiment.Two simulations were performed using forced and forced-free flight to investigate surfacepressure predictive capability and free-flight aerodynamic performance through a varyingatmosphere at low speed (Mach 0.6-0.2). Surface pressure predicted with FF-CFD agreeswell with experimental trends, with slight over-prediction near the end of the trajectory.The total angle-of-attack for the free-flight portion agrees well with experimental data.

FFCFD↗
NASA NTRS1957

Aerodynamic Heating and Boundary-Layer Transition on a 1/10-Power Nose Shape in Free Flight at Mach Numbers up to 6.7 and Free-Stream Reynolds Numbers up to 16 x 10(exp 6)

A modified 1/10-power nose shape has been tested in free flight at Mach numbers up to 6.7 and free - stream Reynolds numbers based on diameter up to 16 X 10(exp 6). Measured heating rates were presented and compared with calculated values. Agreement ranges from poor on the forward portion of the nose to good on the rearward portion. The local Reynolds numbers of transition based on calculated momentum thickness varied between 1, 600 and 350. Laminar flow was maintained at momentum thickness Reynolds numbers of about 1,000 until the free-stream Reynolds number based on a length of 1 foot reached about 27 X 10(exp 6). At slightly higher free-stream Reynolds numbers transition occurred at momentum thickness Reynolds numbers as low as 250.

Garland, Benjamine J↗
NASA NTRS1997

Advanced Free Flight Planner and Dispatcher's Workstation: Preliminary Design Specification

The National Aeronautics and Space Administration (NASA) has implemented the Advanced Air Transportation Technology (AATT) program to investigate future improvements to the national and international air traffic management systems. This research, as part of the AATT program, developed preliminary design requirements for an advanced Airline Operations Control (AOC) dispatcher's workstation, with emphasis on flight planning. This design will support the implementation of an experimental workstation in NASA laboratories that would emulate AOC dispatch operations. The work developed an airline flight plan data base and specified requirements for: a computer tool for generation and evaluation of free flight, user preferred trajectories (UPT); the kernel of an advanced flight planning system to be incorporated into the UPT-generation tool; and an AOC workstation to house the UPT-generation tool and to provide a real-time testing environment. A prototype for the advanced flight plan optimization kernel was developed and demonstrated. The flight planner uses dynamic programming to search a four-dimensional wind and temperature grid to identify the optimal route, altitude and speed for successive segments of a flight. An iterative process is employed in which a series of trajectories are successively refined until the LTPT is identified. The flight planner is designed to function in the current operational environment as well as in free flight. The free flight environment would enable greater flexibility in UPT selection based on alleviation of current procedural constraints. The prototype also takes advantage of advanced computer processing capabilities to implement more powerful optimization routines than would be possible with older computer systems.

Wilson, J.↗