Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREQUENCY DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Environmental Effects on the Stability of Optical Fibers Used for Reference Frequency Distribution

The frequency Standards Laboratory at the Jet Propulsion Laboratory (JPL) is responsible for the generation and distribution of ultra-stabel reference frequencies in NASA's Deep Space Network (DSN).Certain assemblies and components of the Radio Science and VLBI systems are located in the cones of tracking antennas hundreds of meters from the Frequency and Timing Subsystem's frequency standards.

Environmental Effects↗

Effect of photogrammetric reading error on slope-frequency distributions

The effect of reading error on two hypothetical slope frequency distributions and two slope frequency distributions from actual lunar data in order to ensure that these errors do not cause excessive overestimates of algebraic standard deviations for the slope frequency distributions. The errors introduced are insignificant when the reading error is small and the slope length is large. A method for correcting the errors in slope frequency distributions is presented and applied to 11 distributions obtained from Apollo 15, 16, and 17 panoramic camera photographs and Apollo 16 metric camera photographs.

Moore, H. J.↗

Coronal Heating as Determined by the Solar Flare Frequency Distribution Obtained by Aggregating Case Studies

Flare frequency distributions represent a key approach to addressing one of the largest problems in solar and stellar physics: determining the mechanism that counterintuitively heats coronae to temperatures that are orders of magnitude hotter than the corresponding photospheres. It is widely accepted that the magnetic field is responsible for the heating, but there are two competing mechanisms that could explain it: nanoflares or Alfvén waves. To date, neither can be directly observed. Nanoflares are, by definition, extremely small, but their aggregate energy release could represent a substantial heating mechanism, presuming they are sufficiently abundant. One way to test this presumption is via the flare frequency distribution, which describes how often flares of various energies occur. If the slope of the power law fitting the flare frequency distribution is above a critical threshold, α = 2 as established in prior literature, then there should be a sufficient abundance of nanoflares to explain coronal heating. We performed >600 case studies of solar flares, made possible by an unprecedented number of data analysts via three semesters of an undergraduate physics laboratory course. This allowed us to include two crucial, but nontrivial, analysis methods: preflare baseline subtraction and computation of the flare energy, which requires determining flare start and stop times. We aggregated the results of these analyses into a statistical study to determine that α = 1.63 ± 0.03. This is below the critical threshold, suggesting that Alfvén waves are an important driver of coronal heating.

Astrostatistics distributions↗

Frequency distributions and correlations of solar X-ray flare parameters

Frequency distributions of flare parameters are determined from over 12,000 solar flares. The flare duration, the peak counting rate, the peak hard X-ray flux, the total energy in electrons, and the peak energy flux in electrons are among the parameters studied. Linear regression fits, as well as the slopes of the frequency distributions, are used to determine the correlations between these parameters. The relationship between the variations of the frequency distributions and the solar activity cycle is also investigated. Theoretical models for the frequency distribution of flare parameters are dependent on the probability of flaring and the temporal evolution of the flare energy build-up. The results of this study are consistent with stochastic flaring and exponential energy build-up. The average build-up time constant is found to be 0.5 times the mean time between flares.

Crosby, Norma B.↗

Size-frequency distributions of EH3 chondrules

Size-frequency distributions of chondrules in three EH3 chondrites, namely Qingzhen, Kota-Kota and ALHA77156, are presently determined. Radial pyroxene chondrules are larger than cryptocrystalline chondrules, while nonporphyritic chondrules have a broader size-frequency distribution than the porphyritic, and porphyritic olivine-pyroxene chondrules are larger than porphyritic pyroxene chondrules. This last result is due to a reaction of fine-grained olivine with free silica to form pyroxene during mild thermal metamorphism of the whole-rocks.

Rubin, Alan E.↗

Model for radial dependence of frequency distributions for energy imparted in nanometer volumes from HZE particles

This paper develops a deterministic model of frequency distributions for energy imparted (total energy deposition) in small volumes similar to DNA molecules from high-energy ions of interest for space radiation protection and cancer therapy. Frequency distributions for energy imparted are useful for considering radiation quality and for modeling biological damage produced by ionizing radiation. For high-energy ions, secondary electron (delta-ray) tracks originating from a primary ion track make dominant contributions to energy deposition events in small volumes. Our method uses the distribution of electrons produced about an ion's path and incorporates results from Monte Carlo simulation of electron tracks to predict frequency distributions for ions, including their dependence on radial distance. The contribution from primary ion events is treated using an impact parameter formalism of spatially restricted linear energy transfer (LET) and energy-transfer straggling. We validate our model by comparing it directly to results from Monte Carlo simulations for proton and alpha-particle tracks. We show for the first time frequency distributions of energy imparted in DNA structures by several high-energy ions such as cosmic-ray iron ions. Our comparison with results from Monte Carlo simulations at low energies indicates the accuracy of the method.

Non-NASA Center↗

Distributed Frequency Divider for Power System Bus Frequency Online Estimation Considering Virtual Inertia From DFIGs

In this work, a distributed frequency divider is proposed to estimate power system bus frequency with a limited number of PMUs while considering the inertial contributions from double-fed induction generators (DFIGs). The key idea is to reformulate the original frequency divider by modeling the contributions of DFIGs with inertia emulation and external regional power system through Thevenin equivalents. The distributed frequency divider is general and able to estimate local bus frequencies in a distributed manner. Besides, only the knowledge of the rotor speeds of synchronous generator, boundary bus frequencies and terminal bus frequencies of DFIGs as well as the admittance matrix are required to estimate the frequencies at all buses. This is drastically different from existing approaches that require system observability by PMUs to monitor all bus frequencies. Numerical results carried out on the IEEE 39-bus and modified 118-bus power systems with DFIGs demonstrate and effectiveness and robustness of the proposed method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Stabilized fiber-optic frequency distribution system

A technique for stabilizing reference frequencies transmitted over fiber-optic cable in a frequency distribution system is discussed. The distribution system utilizes fiber-optic cable as the transmission medium to distribute precise reference signals from a frequency standard to remote users. The stability goal of the distribution system is to transmit a 100-MHz signal over a 22-km fiber-optic cable and maintain a stability of 1 part in 10(17) for 1000-second averaging times. Active stabilization of the link is required to reduce phase variations produced by environmental effects, and is achieved by transmitting the reference signal from the frequency standard to the remote unit and then reflecting back to the reference unit over the same optical fiber. By comparing the phase of the transmitted and reflected signals at the reference unit, phase variations of the remote signal can be measured. An error voltage derived from the phase difference between the two signals is used to add correction phase.

Primas, L. E.↗

Comparison between photogrammetric and bistatic-radar slope frequency distributions

A comparison was made of the results for lunar surface roughness estimates and slope frequency distributions obtained by using photogrammetric techniques with those obtained by using bistatic radar. Three topics were discussed: (1) the form of the slope frequency distributions, (2) the change of roughness estimates of the lunar surface with scale, and (3) the magnitude of surface roughness.

Moore, H. J.↗

Changes in the frequency distribution of energy deposited in short pathlengths as a function of energy degradation of the primary beam.

The frequency distributions of event size in the deposition of energy over small pathlengths have been measured after penetration of 44.3 MeV protons through various thicknesses of tissue-equivalent material. Results show that particle energy straggling of an initially monoenergetic proton beam after passage through an absorber causes the frequency distributions of energy deposited in short pathlengths of low atomic number materials to remain broad. In all cases investigated, the ratio of the most probable to the average energy losses has been significantly less than unity.

Baily, N. A.↗

Motional broadening in ensembles with heavy-tail frequency distribution

We show that the spectrum of an ensemble of two-level systems can be broadened through ''resetting'' discrete fluctuations, in contrast to the well-known motional-narrowing effect. The broadening occurs if the ensemble frequency distribution has heavy tails with a diverging first moment. The asymptotic motional broadened line shape is then a Lorentzian. In case there is a physical upper cutoff in the frequency distribution, the broadening effect may still be observed, though only up to a certain fluctuation rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Distributed Frequency Control of Prosumer-Based Electric Energy Systems

In this paper, we propose a distributed frequency regulation framework for prosumer-based electric energy systems, where a prosumer (producer-consumer) is defined as an intelligent agentwhich can produce, consume, and/or store electricity. Despite the frequency regulators being distributed, stability can be ensured while avoiding inter-area oscillations using a limited control effort. To achieve this, a fully distributed one-step model-predictive control protocol is proposed and analyzed, whereby each prosumer communicates solely with its neighbors in the network. The efficacy of the proposed frequency regulation framework is shown through simulations on two real-world electric energy systems of different scale and complexity. We show that prosumers can indeed bring frequency and power deviations to their desired values after small perturbations.

Nazari, MH↗

Radarclinometry - Bootstrapping the radar reflectance function from the image pixel-signal frequency distribution and an altimetry profile

A method for determining the dependence of radar backscatter on incidence angle that is applicable to the region corresponding to a particular radar image is derived. The method is based on enforcing mathematical consistency between the frequency distribution of the images' pixel signals and a one-dimensional frequency distribution of slope component, which is obtained from a radar or laser altimetry profile in or near the imaged area. To test the resulting algorithm, an arbitrarily selected reflectance function is used to generate an artificial radar image from a digitized topographic map of the Lake Champlain West quadrangle in the Adirondack Mountains, U.S. It is found that, for 99 percent of the data, the maximum error is 1 degree.

Wildey, Robert L.↗

Rock Size-Frequency Distributions at the Mars Exploration Rover Landing Sites: Impact Hazard and Accessibility

The Viking and Mars Pathfinder landing sites and a wide variety of rocky locations on the Earth show size-frequency distributions that follow an exponential when expressed in cumulative fractional area covered by rocks of a given diameter or larger versus diameter plots. Mars lander rock distributions have been fit by an equation of the form: Fk(D) = k exp [-q(k) D], where Fk(D) is the cumulative fractional area covered by rocks of diameter D or larger, k is the total area covered by all rocks, and an exponential q(k) = 1.79 + 0.152/k, which governs how abruptly the area covered by rocks decreases with increasing diameter. These distributions form a family of noncrossing curves that flatten out at small rock diameter at a total rock abundance of 5-40%. Model rock size-frequency distributions indicate a low probability of impacting hazardous rocks during MER landing. Rocks large enough to analyze and abrade by the rover should be plentiful within an easy Sol's drive.

Golombek, M. P.↗

Interpretation of Fracture Initiation Points by In-Well Low-Frequency Distributed Acoustic Sensing in Horizontal Wells

Summary Low-frequency distributed acoustic sensing (LF-DAS) exploits the optical phase shift of Rayleigh backscatter in fiber-optic cables to obtain distributed measurements of changes in strain and temperature. Fiber-optic cables are often installed for multistage hydraulic fracture diagnostics in horizontal wells. LF-DAS in an untreated well provides far-field strain measurements, while offset wells are hydraulically fractured. Such a configuration is called crosswell LF-DAS sensing. Crosswell LF-DAS measurements have proved useful in diagnosing fracture hits, fracture azimuth, planarity, cluster efficiency, fracture propagation rates, and the dynamic distance to the fracture front. In contrast, in-well LF-DAS is conducted on the actively fractured well. Due to cool fracture fluid being injected at high injection rates, the strain component of the LF-DAS response is largely obscured by temperature changes. In permanent fiber-optic cable installations, distributed temperature sensing (DTS) is often conducted simultaneously with LF-DAS. An opportunity exists to decouple the temperature and strain components of LF-DAS sensors to observe strain changes on in-well LF-DAS. The LF-DAS response is modeled as linearly dependent on strain and temperature changes. Theoretical LF-DAS temperature and strain sensitivity coefficients are derived based on the changes to the index of refraction and length of the fiber. Using the DTS measurements, temperature changes are computed, smoothed, filtered, and compared to the LF-DAS response. Crossplots of the in-well LF-DAS measurements and temperature changes from DTS measurements far from the actively fractured region are used to validate the theoretical sensitivity coefficients. Uncertainty in the temperature component of the LF-DAS response is quantified. The difficulty in corresponding the different spatial and temporal resolutions of the DTS and LF-DAS measurements is overcome by comparing the responses over a moving temporal and spatial window. If the LF-DAS response at the center of the window agrees with the DTS response within uncertainty, the measurement is filtered out. After filtering, the remaining nonzero in-well LF-DAS measurements are due to changes in strain. The data are then visualized in waterfall plots. The results indicate that the theoretical and observed strain and temperature coefficients agree within 10%. After the temperature component of the in-well LF-DAS response is extracted, the remaining nonzero measurements are located primarily within the actively treated region. Locations with peaks in the strain response are interpreted to indicate fracture initiation points. These fracture initiation points are compared with in-well DTS and high-frequency DAS noise measurements across multiple stages to better understand fracture initiation along the horizontal well.

Engineering↗

Size-frequency distributions of chondrules in CO3 chondrites

The size-frequency distributions of chondrules were determined for eleven CO3 chondrites (including ALHA77003, ALHA77307, ALH82101, ALH85003, Colony, Felix, Isna, Kainsaz, Lance, Ornans, and Warrenton), using the results of petrographic analyses of thin sections. The mean proportion of different chondrule types in CO3 chondrites were estimated to be 69 percent POP, 18 percent PP, 8 percent PO, 2 percent BO, 2 percent RP, 1 percent C, and less than 0.1 percent GOP. These proportions are very different from those in ordinary or EH and CV chondrites, with the smaller proportion of nonporphyritic chondrules than EH chondrites, but a larger proportion than CV chondrites. Relative proportions of chondrule types vary with size interval; thus, with decreasing chondrule size, PO chondrules decrease fairly regularly in abundance, while RP chondrules are most abundant in the smallest size intervals.

Rubin, Alan E.↗