Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREQUENCY RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Novel internal measurements of ion cyclotron frequency range fast-ion driven modes

Abstract Novel internal measurements and analysis of ion cyclotron frequency range fast-ion driven modes in DIII-D are presented. Observations, including internal density fluctuation ( n ~ ) measurements obtained via Doppler backscattering, are presented for modes at low harmonics of the ion cyclotron frequency localized in the edge. The measurements indicate that these waves, identified as coherent ion cyclotron emission (ICE), have high wave number, k ⊥ ρ fast ≳ 1, consistent with the cyclotron harmonic wave branch of the magnetoacoustic cyclotron instability, or electrostatic instability mechanisms. Measurements show extended spatial structure (at least ∼1/6 the minor radius). These edge ICE modes undergo amplitude modulation correlated with edge localized modes (ELM) that is qualitatively consistent with expectations for ELM-induced fast-ion transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Full wave modeling of radio-frequency beams in tokamaks in the electron cyclotron frequency range

Simulation of full wave, without paraxial approximation, high-resolution solution of wave equations in frequency domain in the electron cyclotron resonance (ECR) frequency range for realistic Tokamak plasma parameters became possible by using recently formulated hybrid iterative algorithm [Svidzinski et al., Phys. Plasmas 25, 082509 (2018)] for numerically solving discretized wave equations. This approach combines time evolution and iterative relaxation techniques into iteration cycles. This algorithm is implemented in 2D code FullWave, solving wave equations in Tokamaks in cold and hot plasma models, and it has been tested in 3D full wave iterative RF beams simulation tool, which is presently being developed to model 3D ECRH RF beams in fusion devices using dynamic grid adaptation. The results of 2D full wave modeling, assuming specified toroidal mode number, of ECRH RF beams in DIII-D plasma, performed in the cold and hot plasma models for outboard and top launch scenarios using FullWave are presented. Nonlocal hot plasma response model, based on accurate numerical solution of linearized Vlasov equation, is used to model beam propagation and absorption in the 2nd electron cyclotron harmonic region. Demonstration of capability of the hybrid iterative algorithm to model ECRH RF beams in 3D is made by simulating a substantial part of realistic beam in DIII-D, launched from outboard side of the machine. All relevant physics of RF beam propagation, most of which is not captured in paraxial approximation, such as beam's divergence, interference between the X and O modes in the beam, X-O mode conversion, beam splitting into the X and O mode beams, transformation of beam's cross section, and absorption at the 2nd electron cyclotron harmonic, is captured in the simulations. A numerical technique to find an optimal beam polarization at the launcher to launch a nearly pure X or O mode beam in plasma is developed and tested.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Interpretation of electromagnetic modes in the sub-TAE frequency range in JET plasmas with elevated monotonic q-profiles

Recent JET deuterium experiments with an advanced tokamak scenario using an internal transport barrier (ITB) have been performed to clearly observe destabilized toroidicity-induced Alfvén eigenmodes (TAEs) by fast ions; interestingly, these also exhibit unstable electromagnetic (EM) perturbations in the sub-TAE frequency range. We identify such EM perturbations to be beta-induced ion temperature gradient (BTG) eigenmodes and not beta-induced Alfvén eigenmodes nor beta-induced Alfvén acoustic eigenmodes, which are often unstable in such high-beta plasmas with high-power neutral beam injection (NBI). The BTG modes are the most unstable modes due to the high thermal ion temperature gradient related to the ITB, high thermal ion temperature compared to thermal electron temperature (high T i /T⁠ e ), and a high ion beta regime. BTG mode experimental characteristics match the analytical theory, i.e., location in the vicinity of a rational magnetic surface with a low magnetic shear, mode frequency scaling with the ion diamagnetic frequency (⁠ω$^*_i$⁠), and a coupling among Alfvén and drift waves. We also perform linear gyrokinetic simulations with validated plasma profiles and equilibrium, and find a mode kinetically driven by thermal ions with similar characteristics as the experimental BTG modes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Low spontaneous Brillouin scattering in anti-resonant hollow-core fibers in GHz frequency range

Brillouin light scattering (BLS) is a powerful experimental tool that can be used to gain insights into the fundamental and applied properties of matter, like dispersions of quasiparticles in a solid, as well as their spatiotemporal dynamics. Many applications of light scattering favor the use of optical fibers in place of free-space optics. In this study, we compare the performance of anti-resonant hollow core fibers to that of conventional solid core fused silica fibers for BLS experiments in the GHz frequency range. Conventional fibers are barely suitable for low-noise measurements because of the spontaneous scattering of photons on various phononic modes present in the core and cladding. In the case of the hollow-core fiber, we identify a range of discrete phononic modes and associate them with the various acoustic modes of the structure surrounding the hollow core using finite-element numerical simulations. The measured relative intensity of the spontaneous BLS signal from these modes is orders of magnitude smaller than that of a solid-core fiber, making anti-resonant hollow-core fibers one of the best solutions for the single-mode light guidance for BLS and potentially other low-noise photonic experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Investigation of magnetic noise from conductive shields in the 10–300 kHz frequency range

Here we present experimental and theoretical investigations of magnetic noise originating from radio-frequency (RF) conductive shields of flat geometry in the inductance-dominated impedance regime below 300 kHz. The measurement is based on a Q-factor determination of a coil that provides a sufficient sensitivity, placed at the position where the shield magnetic noise is measured. The theory is based on calculations of magnetic field and inductance of one or a few flat rings that emulate a conductive shield. The theoretical model is found to be in close agreement with experimental data. It can be used to predict the magnetic noise of a conductive shield with different thicknesses, conductivities, and temperatures at different distances for a wide range of frequencies. Although the model can be generalized for a more arbitrary shield geometry, in its presented form, it can be applied to the magnetic noise predictions when the shield surface curvature is not large. One important conclusion is that the RF conductive shield can generate the magnetic noise much lower than femtotesla, and, thus, it can be used in many precision experiments targeting minute high-frequency magnetic signals, such as detection of magnetic resonance imaging and nuclear quadrupole resonance signals and search for axion dark matter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Long range frequency chirping of Alfvén eigenmodes

In this work, a theoretical framework has been developed for an NBI scenario to model the hard non-linear evolution of global Alfvén eigenmodes (GAEs) where the adiabatic motion of phase-space structures (holes and clumps), associated with frequency chirping, occurs in generalized phase-space of slowing down energetic particles. The radial profile of the GAE is expanded using finite elements, which allows an update of the mode structure as the mode frequency chirps. Constants of motion are introduced to track the dynamics of energetic particles during frequency chirping by implementing proper action-angle variables and canonical transformations which reduce the dynamics essentially to 1D. Consequently, we specify whether the particles are drifting inward/outward as the frequency deviates from the initial MHD eigenfrequency. Using the principle of least action, we have derived the non-linear equation describing the evolution of the radial profile by varying the total Lagrangian of the system with respect to the weights of the finite elements. For the choice of parameters in this work, it is shown that the peak of the radial profile is shifted and also broadens due to frequency chirping. The time rate of frequency change is also calculated using the energy balance and we show that the adiabatic condition remains valid once it is satisfied. This model clearly illustrates the theoretical treatment to study the long-range adiabatic frequency sweeping events observed for Alfvén gap modes in real experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Ba ( Ti 1 - x , Zr x ) O 3 relaxors: Dynamic ferroelectrics in the gigahertz frequency range

Relaxor ferroelectrics are of great scientific and technological significance as they exhibit large and unusual responses to external stimuli. Their hallmark features are broadness and frequency dispersion of the peak in the temperature dependence of the dielectric constant. Both are believed to originate from the dynamics of polar nanoregions. Here, we apply first-principles-based molecular dynamics to resolve the gigahertz electric response of dynamically poled Ba (Ti 1 - x , Zr x ) O 3 ferroelectric relaxors that remained overlooked so far. We find that (i) the hallmark relaxor features continue to persist even in the dynamically poled structures, but do not necessarily originate from the polar nanoregions dynamics; (ii) dynamically poled samples exhibit polarization aging which leads to the frequency dependence of both remnant polarization and the Curie temperature; (iii) “dynamical” nature of the latter naturally explains the frequency dependence of the dielectric susceptibility maximum in dynamically poled Ba (Ti 1 - x , Zr x) O 3 ; and (iv) incorporation of the polarization aging into dielectric susceptibility expression explains its enhancing contribution in an intuitive way.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Ultrasonic microphone and ultrasonic acoustic radio

This disclosure provides systems, methods, and apparatus related to an ultrasonic microphone and an ultrasonic acoustic radio. In one aspect a system includes a transmitter and a receiver. The receiver comprises a membrane. The membrane comprises 5 a single layer or multiple layers of a two-dimensional material. The receiver is operable to receive sound waves in a frequency range, with the frequency range being the ultrasonic frequency range

42 ENGINEERING↗
DOE OSTI2021

Ultrasonic microphone and ultrasonic acoustic radio

This disclosure provides systems, methods, and apparatus related to an ultrasonic microphone and an ultrasonic acoustic radio. In one aspect a system includes a transmitter and a receiver. The receiver comprises a membrane. The membrane comprises a single layer or multiple layers of a two-dimensional material. The receiver is operable to receive sound waves in a frequency range, with the frequency range being the ultrasonic frequency range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Ultrasonic microphone and ultrasonic acoustic radio

This disclosure provides systems, methods, and apparatus related to an ultrasonic microphone and an ultrasonic acoustic radio. In one aspect a system includes a transmitter and a receiver. The receiver comprises a membrane. The membrane comprises a single layer or multiple layers of a two-dimensional material. The receiver is operable to receive sound waves in a frequency range, with the frequency range being the ultrasonic frequency range.

Zhou, Qin↗
DOE OSTI2024

Ultrasonic microphone and ultrasonic acoustic radio

This disclosure provides systems, methods, and apparatus related to an ultrasonic microphone and an ultrasonic acoustic radio. In one aspect a system includes a transmitter and a receiver. The receiver comprises a membrane. The membrane comprises a single layer or multiple layers of a two-dimensional material. The receiver is operable to receive sound waves in a frequency range, with the frequency range being the ultrasonic frequency range.

Zhou, Qin↗
DOE OSTI2020

Frequency threshold determination for frequency-responsive load controllers

Systems, methods, and computer media for managing frequency response in a power grid are provided herein. Individual grid-connected electrical devices can be turned on and/or off by corresponding frequency-responsive load controllers when frequency deviations beyond a threshold are detected. Each controller selects, for the corresponding electrical device, a frequency threshold from available frequencies in a frequency range. If the selected frequency falls within a deadband frequency range, then the controller sets the frequency threshold to a frequency outside of the deadband (e.g., to a closest available frequency outside of the deadband). On a system-wide level, this approximates a uniform distribution of frequency thresholds over the entire frequency range, including the deadband, and achieves the proper power-to-frequency relationship for grid stability. A supervisory coordinator can determine the frequency range from which a frequency threshold is selected based on aggregated power information for devices and controllers throughout the grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Techniques for charging and/or discharging a battery using frequency modulation

Described herein are techniques that increase the charging and/or discharging rate of a rechargeable battery, at least in part, by using frequency modulated (FM) signals having a frequency in the megahertz (MHz) frequency range. In some embodiments, the MHz frequency range may include any frequency between 0.1 MHz and 1 gigahertz (GHz). In some embodiments, a battery charger described herein may be configured to generate and transmit, to a battery, an FM signal modulated over a frequency range during a period of time, the FM signal having a frequency of at least 0.5 MHz during at least a first portion of the period of time. In some embodiments, a method described herein includes transmitting an FM signal modulated over a frequency range during a period of time and having a frequency of at least 0.5 MHz during at least a first portion of the period of time to a battery.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Axion dark matter experiment: Run 1B analysis details

Searching for axion dark matter, the ADMX Collaboration acquired data from January to October 2018, over the mass range 2.81–3.31 μeV, corresponding to the frequency range 680–790 MHz. Using an axion haloscope consisting of a microwave cavity in a strong magnetic field, the ADMX experiment excluded Dine-Fischler-Srednicki-Zhitnisky (DFSZ) axions at 90% confidence level and 100% dark matter density over this entire frequency range, except for a few gaps due to mode crossings. This paper explains the full ADMX analysis for run 1B, motivating analysis choices informed by details specific to this run.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Kinetic simulation of a 50 mTorr capacitively coupled argon discharge over a range of frequencies and comparison to experiments

The effect of driving frequency in the range of 13.56–73 MHz on electron energy distribution and electron heating modes in a 50 mTorr capacitively coupled argon plasma discharge is studied using 1D-3V particle-in-cell simulations. Calculated electron energy probability functions exhibit three distinct “temperatures” for low-, mid-, and high-energy electrons at all the studied driving frequencies. When compared to published experimental data, the calculated probability functions show a reasonable agreement for the energy range resolved in the measurements (about 2–10 eV). Discrepancies due to limitations in experimental energy resolution outside this range lead to differences between computational and experimental values of the electron number density determined from the distribution functions, and the predicted effective electron temperature is within 25% of experimental values. The impedance of the discharge is interpreted in terms of a homogeneous equivalent circuit model, and the driving frequency dependence of the inferred combined sheath thickness is found to obey a known, theoretically derived, power law. The average power transferred from the field to the electrons (electron heating) is computed, and a region of negative heating near the sheath edge, particularly at higher driving frequencies, is identified. Analysis of the electron momentum equation shows that electron inertia, which on temporal averaging would be zero in a linear regime, is responsible for negative values of power deposition near the sheath edge at high driving frequencies due to the highly nonlinear behavior of the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Asymmetrical cavity design that bypasses mode mixings in axion haloscope experiments

Microwave cavities used in axion haloscope experiments typically employ a tuning rod as a means to widen the range of resonance frequencies at which it is sensitive to axion-to-photon conversion. A realistic tuning mechanism requires a gap between the cavity end caps and the tuning rod to ensure movement, and causes some modes to hybridize with the resonant mode that is being tracked for the experiment. These so-called mode mixings lead to gaps in the frequency range that practically lose sensitivity to axions. Here, to solve this problem, we present a cavity design which, for two tuning rod configurations corresponding to a lower and higher frequency range, have a dielectric rod inserted at a specific location that makes the cavity asymmetrical. Moving the tuning rod closer to the dielectric insert changes the location and frequency of the mode mixing compared to when it is farther away from it. This design is easily realizable in practical experiments and makes possible an axion dark matter search with minimal loss in sensitivity due to mode mixings. We also show that the same design has the same desired effect when cavity dimensions are scaled down to be smaller and are at higher resonance frequencies.

Axion↗
DOE OSTI2025

Efficient Broadband Terahertz Generation by Above‐Band‐Gap Excitation of the Pyroelectric ZnSnN 2

Terahertz (THz) radiation is a powerful probe of low-energy excitations in all phases of matter. However, it remains a challenge to find materials that efficiently generate THz radiation in a broad range of frequencies following optical excitation. Here, we investigate a pyroelectric material, ZnSnN 2 , and find that its above-band-gap excitation results in the efficient formation of an ultrafast photocurrent generating THz radiation. The resulting THz electric field spans a frequency range from below 1 THz to above 30 THz. The results suggest that the photocurrent is primarily driven by an ultrafast pyroelectric effect where the photo-excited carriers screen the spontaneous electric polarization of ZnSnN 2 . Strong structural disorder reduces the photocarrier lifetime significantly and, thus, enables broadband operation. ZnSnN2 shows a similar THz-emitter performance as the best spintronic THz emitters regarding bandwidth and amplitude. The study unveils the large potential of pyroelectric materials as efficient and broadband THz emitters with built-in bias fields.

36 MATERIALS SCIENCE↗