Search NASA⌕ Search

SEARCH · Search NASA

Results for “FT TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Study of LHCD efficiency on the FT-2 tokamak

The paper pays the main attention to the LHCD efficiency in experiments on the FT-2 tokamak. LH wave spectra P(N{sub z}) excited by the grill computed by GRILL3D code are presented. Physical processes responsible for termination of the CD with density rise are discussed for lower and higher plasma currents that are for relatively cold and relatively hot plasmas. A role of parametric processes and additional impurity influx for CD switching-off in the plasma are considered for those conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parameters of turbulent structures at the periphery of the FT-2 tokamak

Results are presented from probe measurements carried out in the scrape-off layer of the FT-2 tokamak in the course of additional lower hybrid heating, during which an L-H transition was observed. The objective of this study was to obtain information on the parameters of blobs-turbulent structures with enhanced plasma density. The measurements were performed not only on the low-field side of the torus, but also on the high-field side, which is still poorly studied. Coherent structures with radial velocities directed both toward the vessel wall and into the plasma column were revealed at the tokamak periphery. Blobs propagating toward the vessel wall were found to prevail both before and after the L-H transition. The average radial velocity of blobs in the L- and H-modes was determined experimentally. The dependence of the radial blob velocity on the transverse size and density of the structure agrees with the ballooning mode model. It is found that the average value of the poloidal blob velocity is four to five times higher than the average radial velocity. The results of measurements carried out on both sides of the torus indicate the presence of internal poloidal polarization of blobs. The average drift velocity of such polarized structures is directed toward the vessel wall. The L-H transition is accompanied by a reduction in the radial velocity. At the same time, the average plasma density inside the structures observed on the low-field side increases appreciably during the transition. The obtained dependences of the radial blob velocity on the plasma density inside the structure generally agree with predictions of the ballooning mode model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transition into the improved core confinement mode as a possible mechanism for additional electron heating observed in the lower hybrid current drive experiments at the FT-2 tokamak

In experiments on lower hybrid current drive (LHCD) carried out at the FT-2 tokamak, a substantial increase in the central electron temperature T{sub e}(r = 0 cm) from 550 to 700 eV was observed. A complex simulation procedure is used to explain a fairly high LHCD efficiency and the observed additional heating, which can be attributed to a transition into the improved core confinement (ICC) mode. For numerical simulations, data obtained in experiments with deuterium plasma at 〈n{sub e}〉 = 1.6 × 10{sup 19} m{sup –3} were used. Simulations by the GRILL3D, FRTC, and ASTRA codes have shown that the increase in the density and central temperature is apparently caused by a significant suppression of heat transport in the electron component. The mechanism for transition into the improved confinement mode at r < 3 cm can be associated with the broadening of the plasma current channel due to the lower hybrid drive of the current carried by superthermal and runaway electrons. In this case, the magnetic shear s = (r/q)(dq/dr) in the axial region of the plasma column almost vanishes during the RF pulse. In this study, the effect of lower hybrid waves on the plasma parameters, resulting in a transition into the ICC mode, is considered. New experimental and calculated data are presented that evidence in favor of such a transition. Special attention is paid to the existence of a threshold for the transition into the ICC mode in deuterium plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotopic effect in experiments on lower hybrid current drive in the FT-2 tokamak

To analyze factors influencing the limiting value of the plasma density at which lower hybrid (LH) current drive terminates, the isotopic factor (the difference in the LH resonance densities in hydrogen and deuterium plasmas) was used for the first time in experiments carried out at the FT-2 tokamak. It is experimentally found that the efficiency of LH current drive in deuterium plasma is appreciably higher than that in hydrogen plasma. The significant role of the parametric decay of the LH pumping wave, which hampers the use of the LH range of RF waves for current drive at high plasma densities, is confirmed. It is demonstrated that the parameters characterizing LH current drive agree well with the earlier results obtained at large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of the electron thermal diffusivity at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak

The dynamics of electron heat transport at improved energy confinement during lower hybrid plasma heating in the FT-2 tokamak was studied experimentally. Evolution of the profiles of the electron temperature and density was thoroughly investigated under conditions of fast variation in the plasma parameters. The energy balance in the electron channel is calculated with the help of the ASTRA code by using the measured plasma parameters. Correlation is revealed between the dynamics of electron heat transport and the behavior of small-scale drift turbulence measured using the enhanced scattering correlation diagnostics. The suppression of heat transfer and turbulence agrees well with the increase in the shear of poloidal plasma rotation calculated from experimental data in the neoclassical approximation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of the efficiency of lower hybrid current drive in the FT-2 tokamak

Results are presented from experimental studies of the efficiency of lower hybrid current drive (LHCD) in the FT-2 tokamak. The dependence of the LHCD efficiency on the grill phasing {Delta}{phi} and RF oscillator power was determined experimentally in a wide range of plasma densities. It is shown that, at high plasma currents (i.e., at sufficiently high electron temperatures), current drive is suppressed when the plasma density reaches its resonance value n{sub LH} for the pumping wave frequency, rather than when parametric decay comes into play (as was observed in regimes with lower plasma currents and, accordingly, lower electron temperatures T{sub e}). In order to analyze the experimentally observed effect of LHCD and its dependence on the value and sign of the antenna phasing, the spectra of the excited LH waves, P(N{sub z}), were calculated. Simulations using the FRTC code with allowance for the P(N{sub z}) spectrum and the measured plasma parameters made it possible to calculate the value and direction of the LH-driven current, which are determined by the spectrum of the excited LH waves. It is shown that the synergetic effect caused by the interaction between different spectral components of the excited RF wave plays a decisive role in the bridging of the gap in the wave spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Isotopic effect study in the LHCD and LHH experiments in hydrogen/deuterium plasmas of the FT-2 tokamak

Results of comparative experimental studies of the efficiency of lower hybrid current drive (LHCD) and lower hybrid heating (LHH) in the FT-2 tokamak in hydrogen and deuterium plasmas are presented. In the new comparative experimental runs in deuterium/hydrogen plasmas suppression of the LHCD and beginning of the interaction of LH waves with ions is controlled by the plasma density rise. Role of parametric instabilities in CD switch-off is considered. In order to analyze the experimentally observed effect of LHCD the GRILL3D and FRTC codes has been used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Time evolution of the exponential wavenumber spectra of turbulence upon helium injection into a hydrogen discharge at the FT-2 tokamak

The effect of variations in the key parameter of short-wavelength turbulence-the ion-acoustic Larmor radius {rho}{sub s}, which determines the position of the maximum of the drift instability growth rate over poloidal wavenumbers-was studied experimentally at the FT-2 tokamak. For this purpose, helium was injected to hydrogen plasma, which resulted in a change in the electron temperature at the plasma edge. The universality of the exponential shape of the turbulence spectra over radial wavenumbers q and a substantial excess of the characteristic turbulence scale L over the ion-acoustic Larmor radius was confirmed with the help of correlative diagnostics of enhanced scattering. This excess at the discharge periphery reaches a value of 3-5 at a low electron temperature, apparently, due to an increase in the dissipation of drift waves upon their cascade transfer toward short scale-lengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron thermal transport analysis in Tokamak a Configuration Variable

A Tokamak a Configuration Variable (TCV) [G. Tonetti, A. Heym, F. Hofmann et al., in Proceedings of the 16th Symposium on Fusion Technology, London, U.K., edited by R. Hemsworth (North-Holland, Amsterdam, 1991), p. 587] plasma with high power density (up to 8 MW/m{sup 3}) core deposited electron cyclotron resonance heating at significant plasma densities ({<=}7x10{sup 19} m{sup -3}) is analyzed for the electron thermal transport. The discharge distinguishes itself as it has four distinct high confinement mode (H-mode) phases. An Ohmic H-mode with type III edge localized modes (ELMs), which turns into a type I ELMy H-mode when the ECRH is switched on. The ELMs then vanish, which gives rise to a quasistationary ELM-free H-mode. This ELM-free phase can be divided into two, one without magnetohydrodynamics (MHD) and one with. The MHD mode in the latter case causes the confinement to drop by {approx}15%. For all four phases both large-scale trapped electron (TEM) and ion temperature gradient (ITG) modes and small-scale electron temperature gradient (ETG) modes are analyzed. The analytical TEM formulas have difficulty in explaining both the magnitude and the radial profile of the electron thermal flux. Collisionality governs the drive of the TEM, which for the discharge in question implies it can be driven by either the temperature or density gradient. The TEM response function is derived and it is shown to be relatively small and to have sharp resonances in its energy dependence. The ETG turbulence, predicted by the Institute for Fusion Studies electron gyrofluid code, is on the other hand driven solely by the electron temperature gradient. Both trapped and passing electrons add to the ETG instability and turbulent thermal flux. For easy comparison of the results of the above approaches and also with the Weiland model, a dimensionless error measure, the so-called average relative variance is introduced. According to this method the ETG model explains 70% of the variation in the electron heat diffusivity whereas the predictive capabilities of the TEM-ITG models are poor. These results for TCV support the conclusion that the ETG model is able to explain a wide range of anomalous electron transport data, in addition to existing evidence from ASDEX [F. Ryter, F. Leuterer, G. Pereverzev, H.-U. Fahrbach, J. Stober, W. Suttrop, and the ASDEX Upgrade Team, Phys. Rev. Lett. 86, 2325 (2001)], Tore Supra [G. T. Hoang, W. Horton, C. Bourdelle, B. Hu, X. Garbet, and M. Ottaviani, Phys. Plasmas 10, 405 (2003)] and the Frascati Tokamak Upgrade [A. Jacchia, F. D. Luca, S. Cirant, C. Sozzi, G. Bracco, A. Brushi, P. Buratti, S. Podda, and O. Tudisco, Nucl. Fusion 42, 1116 (2002)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ECRH: A Tool To Control Disruptions In Tokamaks

ECRH is suited for MHD control in tokamaks and this is well known since the several pioneering experiments investigating MHD stabilization either for confinement increase or for avoidance of disruptions originated by such instabilities. The first of these objectives has been strongly pursued up to the design of a system for neoclassical tearing mode stabilization in ITER based on the use of ECRH/ECCD, whereas the second one has been mostly neglected, despite the initial good results obtained on small tokamaks (RTP, T-10 and JFT-2M) in which ECRH was used to avoid disruptions originated by MHD limits or strong gas puffing. In the last years ECRH has been used again for disruption control on the Frascati Tokamak Upgrade (FTU) and on ASDEX Upgrade (AUG). Disruptions have been obtained by density limit and by impurity injection and an accurate power deposition scan has been performed. Full avoidance has been demonstrated on both tokamaks, confirming the need of a precise power localization and of the existence of a power threshold. The results of past experiments will be reviewed on the basis of the results recently obtained in FTU and AUG, together with a preliminary analysis of the applicability of this disruption control technique to ITER, by extrapolation of the power thresholds found in AUG and FTU.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Cellular Neural Network for Real Time Image Processing

Since their introduction in 1988, Cellular Nonlinear Networks (CNNs) have found a key role as image processing instruments. Thanks to their structure they are able of processing individual pixels in a parallel way providing fast image processing capabilities that has been applied to a wide range of field among which nuclear fusion. In the last years, indeed, visible and infrared video cameras have become more and more important in tokamak fusion experiments for the twofold aim of understanding the physics and monitoring the safety of the operation. Examining the output of these cameras in real-time can provide significant information for plasma control and safety of the machines. The potentiality of CNNs can be exploited to this aim. To demonstrate the feasibility of the approach, CNN image processing has been applied to several tasks both at the Frascati Tokamak Upgrade (FTU) and the Joint European Torus (JET)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Disruption Avoidance in the Frascati Tokamak Upgrade by Means of Magnetohydrodynamic Mode Stabilization Using Electron-Cyclotron-Resonance Heating

Disruption avoidance by stabilization of MHD modes through injection of ECRH at different radial locations is reported. Disruptions have been induced in the FTU (Frascati Tokamak Upgrade) deuterium plasmas by Mo injection or by exceeding the density limit (D gas puffing). ECRH is triggered when the V{sub loop} exceeds a preset threshold value. Coupling between MHD modes (m/n=3/2, 2/1, 3/1) occurs before disruption. Direct heating of one coupled mode is sufficient to avoid disruptions, while heating close to the mode leads to disruption delay. These results could be relevant for the International Thermonuclear Experimental Reactor tokamak operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-Vessel Devices Based on Capillary-Porous Systems with Liquid Metal for a Stationary Tokamak

The experience gained in developing, creating, and testing prototypes of stationary in-vessel devices based on capillary-porous systems with liquid lithium for the T-11M, T-10, KTM, and FTU tokamaks is presented. A promising scheme is proposed for designing liquid-metal-based in-vessel components with heat removal for thermonuclear reactors of the DEMO type and thermonuclear neutron sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Diffusion and stochastic heating of a dust cloud in tokamak edge plasmas

The diffusion due to collisions with ions of a cloud of nano-meter dust particles in the region of the scrape-off-layer (SOL) of a tokamak is considered and it is shown that for the conditions in the Frascati tokamak upgrade, the cloud can expand to reach the SOL limit in very short times without ablating. The conditions for stochastic heating of the cloud and acceleration of a larger particle to hyper-velocities, taking into account the effect of decreasing dust density in the cloud, are established.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dust in FTU with the Thomson Scattering diagnostic

The Thomson scattering diagnostic has been used to measure the dust present in plasma discharges on FTU tokamak after disruption. The vaporization of the dust particles due to the high power of the laser used by the Thomson scattering diagnostic imply that only a rough estimate of the particle size could be derived from the elastic scattering of the laser light. A simple model for dust particle evaporation has been used to infer the size of the dust particle from the scattered light data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of the plasma density in the FTU tokamak by a pulsed time-of-flight X-wave refractometer

On-line control over the plasma density in tokamaks (especially, in long-term discharges) requires reliable measurements of the averaged plasma density. For this purpose, a new method of density measurements-a pulsed time-of-flight plasma refractometry-was developed and tested in the T-11M tokamak. This method allows one to determine the averaged density from the measured time delay of nanosecond microwave pulses propagating through the plasma. For an O-wave, the measured time delay is proportional to the line-averaged density and is independent of the density profile (f>>f{sub p}) {tau}{sub o} {approx} k{sub o} 1/f{sup 2} {integral}{sub l} N(x)dx. Here, f is the frequency of the probing wave, f{sub p} is the plasma frequency, l= 4 a is the path length for two-pass probing in the equatorial plane, a is the plasma minor radius, k{sub O} and k{sub X} are numerical factors, f{sub c} is the electron-cyclotron frequency at the axis of the plasma column, and f{sub p}>>f{sub c}, f. Measurements of the time delay provide the same information as plasma interferometry, though they do no employ the effect of interference. When the conditions f{sub p}>>f{sub c}, f are not satisfied, the measured time delay depends on the shape of the density profile. In this case, in order to determine the average density regardless of the density profile, it is necessary to perform simultaneous measurements at several probing frequencies in order to determine the average density. In ITER (Bt {approx} 5T), a spectral window between the lower and upper cutoff frequencies in the range of 50-100 GHz can be used for pulsed time-of-flight X-wave refractometry. This appreciably simplifies the diagnostics and eliminates the problem of the first mirror. In this paper, the first results obtained in the FTU tokamak with a prototype of the ITER pulsed time-of-flight refractometer are presented. The geometry and layout of experiments similar to the planned ITER experiments are described. The density measured by pulsed time-of-flight refractometry is shown to agree well with the results obtained in FTU with a two-frequency scanning IR interferometer. The results obtained are analyzed, and the future experiments are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗