Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUEL CHANNELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Thermal Analysis of a Fuel Channel

To better study and understand the efficiency of fuel channels in reactors, a thermal analysis method was developed to conduct a study on any fuel channel to gain a better understanding of the temperature, heat rate, heat flux, and power profiles of such fuel channels. This study is conducted on a typical PWR (Pressurized Water Reactor) fuel assembly. The justification for specifically choosing a PWR fuel channel is because PWRs are the most widely used type of reactors around the world. This study was performed using NEWT code in SCALE 6, ANSYS, and SolidWorks. MATLAB and Excel were also utilized for some of the calculations. The power and heat rate of the fuel rod were calculated, alongside a 2D mapping of temperature, heat flux, directional heat flux, and thermal error on a 3D model of the fuel channel by analyzing the fuel rod and the surrounding water moderator independently.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

3-D advanced gas-cooled nuclear reactor fuel channel reconstruction using structure-from-motion - 110

During planned, periodic outages, a selection of fuel channels within the UK fleet of Advanced Gas-cooled Reactor (AGR) cores are inspected using specialist tools which record video footage and other sensory data for each channel which undergoes inspection. Current visualization techniques comprise of manually produced montages by inspection engineers of points of interest (i.e. structural defects) and 2-D panoramic images of the fuel channels automatically produced using bespoke image stitching software. Both techniques however provide limited structural information due to the loss of depth data as a result of the image formation process. By recovering the depth information from the footage, a 3D model could be constructed and subsequently, allow for more accurate profiling of specific defects observed during inspection in addition to obtaining the fuel channels structure using existing footage. This work explores the preliminary application of a 3-D visualization technique known as Structure-from-Motion (SfM) which aims to obtain 3-D information by exploiting image correspondences across multiple viewpoints of the same scene in the RVI footage. This paper investigates the difficulties of applying state-of-the-art SfM to RVI footage and we present new techniques to improve feature correspondence searching in repetitive, nondescript environments. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Status of Multiple Channel Fuel Performance Capabilities Within the SAS4A/SASSYS-1 Safety Analysis Software

SAS4A/SASSYS-1 (SAS) is a fast-running simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced liquid-metal-cooled nuclear reactors. It is a critical element of safety analysis capabilities for the U.S. Department of Energy and is utilized within industry to perform the transient safety analyses required to support the licensing of Liquid Metal-cooled Fast Reactors (LMFRs). Although SAS is exceptionally fast for most transient scenarios, fuel performance calculations, along with the associated pre-transient characterization of the fuel pin, may be required for transient scenarios where fuel pin failure is hypothesized. Both the pre-transient characterization and the transient fuel performance calculation are necessary to properly quantify margins to potential fuel failure and assess the time spent potentially exceeding such margins during events. While safety analysis calculations with fuel performance models provide a more detailed characterization of the reactor during a transient, the pre-transient characterization can be time-consuming and computationally expensive. Often, large numbers of fuel pins have been exposed to similar pre-transient irradiation conditions. Similarly, the same pre-transient fuel characterization may be applicable to numerous transient conditions. This provides an opportunity to optimize the SAS computational framework such that pre-transient fuel characterization can be shared across multiple channels (fuel pins) and across multiple simulations, thus dramatically reducing overall computational costs. This report summarizes progress toward enhancing the SAS computational framework to support shared, multiple channel fuel performance characterizations intended to significantly reduce computational costs. Preliminary testing has shown that the computational time saved by using the pre-transient sharing capability is approximately equal to the time it takes to perform the pre-transient characterization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Numerical Study of the Dynamic Strength of RBMK-1000 Stack with Fuel Channel Rupture

The strength of the stack in a RBMK-1000 reactor facility with a rupture of a fuel channel is studied. Local models of unirradiated and irradiated stack, comprising an assembly consisting of 81 columns, and a complete model of the original stack are developed to calculate the parameters of RBMK-1000 core degradation. Numerical studies of the nonstationary stress-strain state of the initial unirradiated stack and the stack degraded by irradiation one year after the repair-restorative work, which confirm the core strength to be adequate, are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Influence of dissolved salts and impurities on seawater on heat transfer and fluid flow through fuel channels and debris bed

This project aims to better understand this mechanism and its effect on heat transfer. Specifically, experimental research was conducted to investigate the long term coolability issues in scaled test setups. Advanced diagnostic and measurement techniques were investigated and incorporated into an annular test facility and a debris bed test facility. The diagnostic techniques investigated included: radioactively tagged salt solution, Frisch collar radiation detector array, neutron and x-ray imaging systems, and a Rayleigh backscatter-based fiber-optic temperature system. Models were checked against the in-situ experimental data and recommendations were made for modeling purposes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Application of SPH Factors to PHWR Lattice Homogenization

Pressurized Heavy-Water Reactors (PHWRs) are heavy-water moderated and cooled. They consist of a horizontal, cylindrical, non-pressurized calandria vessel which contains the heavy-water moderator and is penetrated axially by fuel channels. Fuel channels consist of two concentric tubes separated by a gas gap: an inner tube called the pressure tube, and an outer tube called the calandria tube. The pressure tubes hold the fuel bundles, which are cooled by the flow of coolant at high temperature and pressure. The coolant flows in opposite directions in adjacent channels. The gap between the pressure and calandria tubes ensures that the temperature of the moderator remains relatively low, below 80 deg. C. For a CANDU 6 reactor, there are 380 fuel channels, each holding 12 37-element fuel bundles, approximately 10-cm in diameter and 50-cm long each. The fuel pins are arranged in three concentric rings (consisting of 6, 12 and 18 pins respectively), plus a central pin. The distance between channels (lattice pitch) is approximately 28.6 cm. Production core-level neutronics calculations are usually performed in a Cartesian geometry using few group diffusion and a simplified core model, whereby neutronics properties are homogenized over large regions called nodes. For Light Water reactors (LWRs), the two-dimensional axial (x-y) projection of a node corresponds to one fuel assembly. For PHWRs, a node usually consists of one fuel bundle and its associated moderator. For LWRs, advanced core-level calculations based on advanced node-level homogenization methods, such as Generalized Equivalence Theory (GET) or Super-homogenisation (SPH), improve the accuracy of full-core calculations compared to - standard homogenization. For rectangular fuel-pin arrangements, SPH can be used to perform pin-cell level homogenization which allows subsequent core-level diffusion calculations to be performed using fine Cartesian meshes. For PHWRs, the distribution of fuel pins in concentric rings makes the use of Cartesian mesh refinement impractical. However, SPH can still be applied, albeit using a coarser node subdivision, by dividing the heterogeneous node into 3x3 sub-regions in such a way that the central sub-region includes the entire fuel channel. This work investigates the use of SPH homogenization using a 3x3 subdivision of the PHWR node. Preliminary results show that the use of SPH factors does not yield more accurate results than standard homogenization when applied to PHWR nodes using a 3x3 subdivision. The explanation appears to lie in the fact that SPH factors are dependent on node-boundary leakage. Future investigations to confirm the leakage-dependence of SPH factors are recommended. Accuracy improvements may also be achievable by using smaller SPH regions at the periphery of the PHWR node, in an attempt to reduce the SPH factors' dependence on node-boundary leakage. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Z4B, AREVA NP's most recent material for structural fuel assembly components

Z4B is AREVA NP's advanced material for fuel channels and BWR fuel assembly structural components such as water channels, which are made of zirconium base material. As such, Z4B is envisaged to replace Zircaloy-2 and Zircaloy-4 as a fuel channel and water channel material. The chemical composition of Z4B is similar to that of Zircaloy-4 with the exception of an increased iron and chromium content slightly above the ASTM specification. The manufacturing processes applied to produce Z4B components are the same as those that have been applied for Zircaloy-2 and Zircaloy-4 materials. AREVA NP has irradiated a total of 74 lead fuel channels made of Z4B either in beta-quenched condition or in fully recrystallized condition in eight BWRs worldwide. Sixty-six of these are still in service with 26 of these lead fuel channels on fuel assemblies of various ATRIUM 10 designs and 40 on ATRIUM 11 lead fuel assemblies. In addition to Z4B fuel channels, the ATRIUM 11 design also features fully recrystallized water channels. The first ATRIUM 11 lead fuel assemblies were inserted in-core in 2012. The first Z4B beta-quenched lead fuel channels were inserted in 2009 and will reach an estimated burnup of 60 MWd/kgHM in 2016 after seven annual cycles of irradiation. The first Z4B fully recrystallized lead fuel channels were also inserted in 2009 and have been discharged with EOL burnups of about 47 MWd/kgHM after three biennial cycles of irradiation. Pool-side inspections of these leads have confirmed the superior uniform and shadow corrosion behavior of Z4B fuel channels relative to Zircaloy-4 fuel channels. This increased corrosion resistance combined with a similar hydrogen pickup fraction to Zircaloy-4 will lead to an overall decrease in total hydrogen content and minimize the potential of hydrogen assisted irradiation growth and abnormal bow of fuel channels in the recrystallized condition. The use of Z4B fuel channels in the beta-quenched condition decreases bow even further due to the resulting quasi-isotropic microstructure. Additionally, fuel channels made of Z4B tend to exhibit reduced bulge, which is valid in both conditions, beta-quenched and recrystallized.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Apparatus and method for mixing fuel in a gas turbine nozzle

A nozzle includes a fuel plenum and an air plenum downstream of the fuel plenum. A primary fuel channel includes an inlet in fluid communication with the fuel plenum and a primary air port in fluid communication with the air plenum. Secondary fuel channels radially outward of the primary fuel channel include a secondary fuel port in fluid communication with the fuel plenum. A shroud circumferentially surrounds the secondary fuel channels. A method for mixing fuel and air in a nozzle prior to combustion includes flowing fuel to a fuel plenum and flowing air to an air plenum downstream of the fuel plenum. The method further includes injecting fuel from the fuel plenum through a primary fuel passage, injecting fuel from the fuel plenum through secondary fuel passages, and injecting air from the air plenum through the primary fuel passage.

42 ENGINEERING↗

Successes and Lessons Learned in the Design, Construction and Use of a Tool for Sampling the WR-1 Reactor Core - 1900z

Whiteshell Laboratories, located in Manitoba, Canada, provided research facilities for the Canadian nuclear industry since the early 1960's. The facility was centered on an organically cooled, heavy water moderated nuclear reactor in the world, Whiteshell Reactor 1 (WR-1). WR-1 was safely shut down in 1985, de-fueled and drained, and has been in a safe Storage with Surveillance (Deferred Decommissioning) state until present day. In support of an Environmental Assessment for proposed In Situ Decommissioning of WR-1, detailed characterization information regarding the reactor core components (calandria, calandria tubes, pressure tubes) was necessary to verify inventory estimates and neutron activation models produced circa 1992. The Fuel Channels of WR-1 (pressure tubes) were expected to be the most activated components of the reactor core, and to account for about 60% of the reactor core inventory. The interior surface of the fuel channel is also the most readily accessible surface within the reactor core. As such the decision was made to collect a sample of one of each of 3 Fuel Channel material types (Stainless Steel, Zr-2.5Nb, Ozhenite) for comparison to modelled estimates of neutron activation of various core materials. The expected dose rates from the samples were between 5 and 100 mSv (500-10,000 mrem) on contact based on a 200 mg sample. Sampling the Fuel Channels required verification the Fuel Channel was drained of organic coolant, removal of residual organic coolant from the Fuel Channel wall, removal of material from the interior surface of the Fuel Channel at the centerline of flux (∼25' below the operator position), and extraction of that material from the core. Several options for existing tooling and technologies, including hydraulic scrapers, and horizontal drill technologies, were looked at for their applicability to WR-1. While suitable approaches to higher radiation field sample collection, they were overly complex, costly and time consuming for the configuration at WR-1. In an effort to reduce costs, and to simplify the sampling process, a specialized and simple tool was developed to mechanically scrape a small sample of the interior wall of the Fuel Channels, collect the sample into a vial, and remove the sample from the core for analysis. The tool was designed, constructed, tested and implemented in the field entirely by Canadian Nuclear Laboratories Staff. The tool required no powered components, or electronic guidance or measurements; and was designed and constructed for a fraction of the cost of other commercially available technologies for sample collection within reactor cores. The samples were successfully collected without any injuries, contamination events or equipment failures. The tool remains operational in the event additional sampling is required. This paper provides additional details of the design, construction, testing and use of the tool and the successes and lessons learned during the various stages of design and implementation. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Serviceability of Phase-1 RBMK-1000 FA After Service-Life Characteristics Restoration

The serviceability of fuel assemblies during operation in the reactor core after restoration of the service-life characteristics of the graphite stack of phase-1 power-generation units with RBMK-1000 is evaluated. The results of FA loading and unloading operations in bent fuel channels and evaluations of the interrelation of the degree and profile of the bending of the fuel channels with a gap between the fuel elements of the outer row and inner surface of the channel tube and the conditions of FA operation in the fuel channels of the modified as well as restored geometry of the actual state of the FA recorded during inspections are presented. It is concluded that the RBMK-1000 FA are serviceable during operation before restoration of the service-life characteristics of the graphite stack as well as after restorative repairs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Improved Understanding of Zircaloy Hydrogen Pickup Mechanisms in BWRs. NSUF Report (Final Report)

Using an instrumented autoclave operating at 288°C and 1100 psi, electrical impedance spectroscopy (EIS) measurements were taken from three neutron irradiated fuel channel samples (Zircaloy-2 and Zircaloy-4). The three high priority fuel channel samples were tested at 288°C using a simulated PWR water with the AC frequency range extending down through 10 -4 Hz, with corresponding DC measurements to validate the resistance measurements. EIS measurements were also taken at room temperature using a simulated PWR water from four neutron irradiated fuel channel samples (Zircaloy-2 and Zircaloy-4). and four water rod samples (Zircaloy-2). EIS measurements were also performed on unirradiated Zircaloy-2 tubes that were previously oxidized in autoclaves at various temperatures for different time durations to obtain oxide layers of different thicknesses. These experiments proved to be more challenging than anticipated because of the small size of the samples, which required development of fixtures to allow valid testing of the materials, some of which are radioactive, under pressure and temperature. Equivalent circuits were used to model the data. Some samples resulted in Nyquist plots where the arcs were too close to each other resulting in the inability to separate the different oxide morphological thicknesses. Microstructural characterization in the form of optical microscopy, scanning electron microscopy and (scanning) transmission electron microscopy was performed to document the microstructural features of the oxidized Zr-2 and Zr-4 samples (oxide and metal/oxide interface) and to interpret the EIS results. At the start of this work, it was assumed that despite the laminar cracks and porosity visible in both optical and SEM, the oxide scale is dense near the metal, effectively preventing the water from contacting the metal directly. While it is generally accepted that the large laminar cracks pores allow the water to percolate into the oxide film, it is unknown just how deep it can go, and how interconnected is the porosity, which will dictate how much the porosity is connected electrically to the water within the oxide scale. The EIS results demonstrated that there is in fact a distribution of oxide thicknesses over the various samples, and within each material condition, that are communicating to the liquid. This is derived from the fact that Nyquist plots have an arc radius whose center point is often below the Z’ axis, implying that instead of a single oxide thickness, these oxides have a distribution of thicknesses. This distribution of thicknesses produces arcs that are not clearly separable in most of the samples.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

GNF fuel technology update

In 2015, Global Nuclear Fuel (GNF) launched the GNF3 fuel design by inserting lead-use assemblies into two boiling water reactors (BWRs) in the U.S. A lead use assembly is a nuclear fuel assembly which is inserted in a reactor core to confirm its performance. A third set of GNF3 lead-use assemblies are scheduled to be inserted into another reactor in the spring of 2017. GNF3 is a robust next-generation 10*10 fuel design that will improve both fuel cycle and fuel reliability. In addition, GNF3 will be delivered in a fully assembled condition - forgoing the need to insert fuel channels over the bundles at the site. The process of shipping BWR fuel in a channeled configuration is complex and requires an understanding of the potential high-cycle and low-cycle fatigue conditions that can occur during shipping, as characterized by accelerometer data from ship tests. The key component in evaluating channeled fuel shipping is the spacer, and the GNF3 spacer fatigue performance was found to be approximately twice that of GNF2. While fuel reliability has traditionally been related to the avoidance of fuel leakers, for the past 15 years channel - control blade interference has been a close second for concern. To eliminate this problem, GNF3 will come standard with NSF (a zirconium alloy) channels that are effectively resistant to fluence gradient-induced bow and shadow corrosion-induced bow. In addition to the development of GNF3, GNF is evaluating the use of advancing 3D metal printing or additive manufacturing for manufacturing fuel bundle components. Additive manufacture offers the hope of more flexibility in design and shorter manufacturing development cycles. However, since there is little experience with this technology in the nuclear industry, GNF has been evaluating the use of additive manufacture to fabricate small scale components that are easily retrieved from the reactor for testing. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

GNF fuel and channel performance: 2016 update

GNF2 is an advanced 10*10 BWR fuel design that was initially introduced in reload quantities in 2008. It has now replaced GE14 as the fuel design with the largest number of bundles in the operating fleet. Utilities are reaping the benefits of improved nuclear and thermal performance as well as high reliability. Transition to GNF2 fuel in the fleet is nearly complete with only three plants continuing to receive GE14 fuel in 2016. GNF2 reload bundles are now being discharged, and inspections have been completed on GNF2 bundles operated to over 61 GWd/MT and over 7.5 years. For both GE14 and GNF2, 2015 was a challenging year in terms of fuel reliability, with an increase in debris-related failures. The failures are concentrated in pumped-forward drain plants (that have long showed increased susceptibility to debris issues), plants with histories of recurrent debris failures, and in some cases in plants that had component failures or unusual or extensive maintenance or modifications. There have been no failures from causes other than debris. In GNF2, there are no failures due to manufacturing, PCI-type, dryout, or any form related to crud or corrosion. Operating experience in 2015 (and over the past decade) is discussed in terms of Failed Fuel Management, or operation with fuel failures in the core, and channel - control blade interference. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The performance of NSF in BWR operating conditions - 2016-0062

NSF is a zirconium alloy in the zirconium-tin-niobium-iron family. The nominal alloy content is 1 % tin, 1 % niobium, and 0.4 % iron. The initial targeted component for NSF in boiling water reactors (BWRs) is the fuel assembly channel. A BWR fuel channel encases the fuel bundle such that boiling is confined within the channel while the water remains solid outside the channel. The BWR fuel channel also defines the gap between the bundles where the cruciform control blade inserts and withdraws to control the criticality of the core. The key performance requirements of the BWR fuel channel are dimensional stability (including both shape and thickness) and adequate mechanical properties to withstand the applied stresses. The distortion mechanisms that affect dimensional stability are fluence gradient-induced bow, shadow corrosion-induced bow, and elastic and creep bulge. Although NSF is known to have improved irradiation growth characteristics compared with both Zircaloy-2 and Zircaloy-4 that translates to increased dimensional stability in fuel channels, the BWR corrosion performance, tensile properties, and irradiation creep performance are less well known. This paper reports on the physical metallurgy of NSF, oxide thickness and hydrogen content after in-reactor operation, mechanical properties (both irradiated and unirradiated), in-reactor creep response, and irradiation growth and bow of NSF channels. (authors)

36 MATERIALS SCIENCE↗

Quasi-heterogeneous efficient 3-D discrete ordinates CANDU calculations using Attila

In this paper, 3-D quasi-heterogeneous large scale parallel Attila calculations of a generic CANDU test problem consisting of 42 complete fuel channels and a perpendicular to fuel reactivity device are presented. The solution method is that of discrete ordinates SN and the computational model is quasi-heterogeneous, i.e. fuel bundle is partially homogenized into five homogeneous rings consistently with the DRAGON code model used by the industry for the incremental cross-section generation. In calculations, the HELIOS-generated 45 macroscopic cross-sections library was used. This approach to CANDU calculations has the following advantages: 1) it allows detailed bundle (and eventually channel) power calculations for each fuel ring in a bundle, 2) it allows the exact reactivity device representation for its precise reactivity worth calculation, and 3) it eliminates the need for incremental cross-sections. Our results are compared to the reference Monte Carlo MCNP solution. In addition, the Attila SN method performance in CANDU calculations characterized by significant up scattering is discussed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Conceptual design of a pressure tube light water reactor with variable moderator control

This paper presents the development of innovative pressure tube light water reactor with variable moderator control. The core layout is derived from a CANDU line of reactors in general, and advanced ACR-1000 design in particular. It should be stressed however, that while some of the ACR-1000 mechanical design features are adopted, the core design basics of the reactor proposed here are completely different. First, the inter fuel channels spacing, surrounded by the calandria tank, contains a low pressure gas instead of heavy water moderator. Second, the fuel channel design features an additional/external tube (designated as moderator tube) connected to a separate moderator management system. The moderator management system is design to vary the moderator tube content from 'dry' (gas) to 'flooded' (light water filled). The dynamic variation of the moderator is a unique and very important feature of the proposed design. The moderator variation allows an implementation of the 'breed and burn' mode of operation. The 'breed and burn' mode of operation is implemented by keeping the moderator tube empty ('dry' filled with gas) during the breed part of the fuel depletion and subsequently introducing the moderator by 'flooding' the moderator tube for the 'burn' part. This paper assesses the conceptual feasibility of the proposed concept from a neutronics point of view. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

CHARACTERIZATION OF HYDROGEN CONTENT IN ZIRCALOY-4 NUCLEAR FUEL CLADDING

Assessment of hydrogen uptake of underwater nuclear fuel clad and component materials will enable improved monitoring of fuel health. Zirconium alloys are used in nuclear reactors as fuel cladding, fuel channels, guide tubes and spacer grids, and are available for inspection in spent fuel pools. With increasing reactor exposure zirconium alloys experience hydrogen ingress due to neutron interactions and water-side corrosion that is not easily quantified without destructive hot cell examination. Contact and non-contact nondestructive techniques, using Seebeck coefficient measurements and low frequency impedance spectroscopy, to assess the hydrogen content and hydride formation within zircaloy 4 material that are submerged to simulate spent fuel pools are presented.

36 MATERIALS SCIENCE↗

Apparatus for mixing fuel in a gas turbine

A combustor nozzle includes an inlet surface and an outlet surface downstream from the inlet surface, wherein the outlet surface has an indented central portion. A plurality of fuel channels are arranged radially outward of the indented central portion, wherein the plurality of fuel channels extend through the outlet surface.

33 ADVANCED PROPULSION SYSTEMS↗