Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUEL PLATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

MOOSE Optimization Module Overview: Application to Residual Stress Inversion in Nuclear Fuel Plates

Manufacturing methods, material selections and unique plate geometries used in low enriched uranium plate fuels for the High Performance Research Reactor (HPRR) have led to concerns about the residual stresses effect on bond strength of the fuel/cladding interfaces and overall fuel performance under irradiation. The current HPRR plate fuel test program performed residual stress calculations using the contour method with experimental displacement data obtained by incrementally cutting the plate fuel. In this work, we use a gradient based inverse optimization module developed within the MOOSE framework to estimate normal and shear residual stresses within the plate fuels using displacement data taken from a cut placed in the HPRR fuel plate. These results are verified against residual stress calculations obtained from the contour method. The inversion protocol used in this work utilizes two meshes to separately discretize the physics and parameter space. This allows a fine mesh to be used to fully resolve the physics and geometry of the forward problem. A coarser mesh is used to resolve the parameter space with spatially varying mesh density determined from a sensitivity analysis. The adaptive resolution of the parameter space essentially has the effect of regularization as it is designed to achieve the bias-variance tradeoff.

42 ENGINEERING↗
DOE OSTI2025

Evaluation of U10Mo Fuel Plate Performance Modeling Over Hot Isostatic Press and Hydraulic Bending for MURR DDE Plates

The United States High Performance Research Reactor Program’s objective is to reduce the amount of highly enriched uranium currently implemented in research reactors. The conversion of these research reactors requires designing a monolithic U10Mo plate fuel, with the fuel plate geometry being dependent on each research reactor. The process of forming the plates includes a hot isostatic pressing (HIP) to manufacture a prototypic plate. In the case of the Missouri University Research Reactor (MURR) design demonstration element (DDE) plate manufacture, plates that have been through HIP are then curved using dies and a hydraulic press to impart the desired curvature. Both fabrication processes impart residual stresses into each fuel plate region, with the curvature of the plates taking some regions of the fuel plate up to their material yield stresses, accompanied by plastic strain. The amount of plastic strain and stress imparted onto each MURR DDE plate is determined by the radius of curvature, thickness of each region, and overall width of the fuel plates. Furthermore, this work aims to predict the yield stresses and strain using ABAQUS to simulate the proposed fabrication process of the MURR DDE plates, accompanied by discussion over the stresses and strains as to their relation to nuclear fuel performance and the impact they will have during early irradiation.

ABAQUS↗
DOE OSTI2020

Design and Analysis of a 250 MW Plate-fuel Reactor for Nuclear Thermal Propulsion

Nuclear thermal propulsion (NTP) system is a viable option for deep space missions considering its high thrust and lightweight. Promising fuel options being considered for the high operating temperature of NTP include the graphite composite fuel and the tungsten cermet fuel. As there remains uncertainties in the fabrication and performance of these two fuel elements, alternative designs using fuel plates and more standard fuels that are based on proven and tested nuclear technologies are being considered. This paper provides a summary of thermal hydraulic and neutronic analyses of the straight fuel plate concept used for a 250 MW NTP core. The summary of technical findings from a series of scoping studies might be useful for the future NTP engine designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

The STAT7 Code for Statistical Propagation of Uncertainties in Steady State Thermal Hydraulics Analysis of Plate Fueled Reactors

The STAT7 software was developed to perform steady-state thermal hydraulic analyses. Application of the software is for non-power research and test reactors, including conversion to low-enriched uranium fuel of U.S. High-Performance Research Reactors such as MITR-II. Since it can be necessary to repeat analysis during fuel reloading, STAT7 accommodates flexibility in analyzing many realistic aspects of reactor fuel management. STAT7 uses a Monte Carlo approach to model common fabrication parameters and other key reactor analysis uncertainties required for research and test reactor thermal hydraulic analyses. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux or departure from nucleate boiling or onset of flow instability; but additional margin is obtained by basing the limiting safety settings on avoiding onset of nucleate boiling. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one lateral stripe of a fuel element. The stripes run the length of the fuel, from the bottom to the top. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis can be performed by analyzing the margin to onset of nucleate boiling and onset of flow instability for each axial node of each stripe of each plate of each element in the core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

The STAT7 Code for Statistical Propagation of Uncertainties In Steady-State Thermal Hydraulics Analysis of Plate-Fueled Reactors

STAT7 was written to automate many of the steady-state thermal hydraulic safety calculations for the MIT research reactor, both for conversion of the reactor from highly enriched uranium fuel to low-enriched uranium fuel and for future fuel re-loads after the conversion. A Monte-Carlo statistical propagation approach is used to treat uncertainties in important parameters in the analysis. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux or departure from nucleate boiling or onset of flow instability; but additional margin is obtained by basing the limiting safety settings on avoiding onset of nucleate boiling. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one stripe of a fuel element. The stripes run the length of the fuel, from the bottom to the top. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis can be performed by analyzing the margin to ONB for each axial node of each stripe of each plate of each element in the core.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Design and Analysis of a 250 MW Plate-Fuel Reactor for Nuclear Thermal Propulsion

Nuclear thermal propulsion (NTP) is a viable option for deep space missions due to its high thrust and lightweight system. Promising fuel options considered for the high operating temperature of NTP include graphite composite fuel and tungsten cermet fuel. As there remain uncertainties in the fabrication and performance of these two fuel elements, alternative designs using fuel plates and more typical fuels based on proven nuclear technologies are also being considered. This paper provides a summary of thermal hydraulic and neutronic analyses of the straight-plate fuel assembly design used for a 250 MW NTP core. The summary of technical findings from a series of scoping studies might be useful for future NTP engine designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Assessment of failure modes of monolithic fuel plates

Monolithic fuel is a fuel form that is considered for the conversion of high performance research reactors. In order to qualify this new fuel system, the fuel plates should meet the safety standards and perform well in reactor. The fuel system must maintain its mechanical integrity, sustain a geometric stability and should have stable and predictable irradiation behavior. The requirement to maintain mechanical integrity under normal operating conditions is primarily demonstrated by a successful testing of fuel plates up to the limiting conditions defined by the fuel performance envelope, including an adequate margin. Although large number of plates have been tested with satisfactory thermo-mechanical performance, post-irradiation examination of plates from previous RERTR-12 experiments have revealed that pillowing occurred in several plates, rendering performance of these plates unacceptable. To address such failures, efforts are underway to define the mechanisms responsible for the in-reactor pillowing, and suggest improvements to the fuel plate design and operational envelope. For this purpose, selected plates from previous experiments were simulated to understand the thermo-mechanical response of the plates to the fission density and thermally induced stresses. Simulation results were then comparatively evaluated with post-irradiation examinations of selected plates. The simulation results and experimental observations established a possible correlation between failure by plate pillowing, high porosity and a presence of tensile stress state. The study has implied that porosity leading to degradation of material properties, accompanied by a sufficiently large tensile stress state can lead to a pillowing-type failure at reactor shutdown. This paper presents these findings, discusses such failure modes, and the influence of fuel burn-up and power on the magnitude of the shutdown-induced tensile stresses.

42 ENGINEERING↗
DOE OSTI2023

Micro X-ray computed tomography examination of mini plate fuel with hot isostatic pressed aluminum cladding

In order to minimize proliferation risks and improve security of nuclear material, the United States high performance research and test reactors (USHPRR) program is tasked with converting nuclear reactors that are fueled with highly enriched uranium (HEU) fuels to operate with low-enriched uranium (LEU) nuclear fuels. One favorable LEU fuel configuration is plate fuel with a metallic uranium-molybdenum foil clad within an aluminum alloy (AA 6061). In this fuel, the aluminum cladding is bonded with a hot isostatic pressing (HIP) method to seal the cladding around the fuel meat. However, the HIP process parameters influence the cladding performance, as a defective or incomplete bond can cause a pathway for corrosion. Micro X-ray computed tomography (XCT), a nondestructive technique that provides volumetric imaging, can be applied to inspect fuel plate cladding at the engineering scale. In this work, XCT methodology was developed and successfully utilized to not only observe the bond line of unirradiated mini fuel plates, but to also identify subsurface abnormalities in the plates’ cladding. Importantly, in future work, this technique could be applied to fuel plates, pre- and post-irradiation, to quantify irradiation effects on cladding defects and bond line integrity.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Size effects on thermo-mechanical performance of U-10Mo monolithic fuel plates

Monolithic fuel is a fuel form that is considered for the conversion of high performance research reactors. This plate-type fuel consists of a high density U-Mo fuel in monolithic form that is sandwiched between zirconium diffusion barriers, and encapsulated in an aluminum cladding. To date, large number of plates have been irradiated with satisfactory perforamce. The program is now moving into the qualification phase, a predecessor to the timely conversion of the target reactors. It must be shown that the fuel system meets the safety standards and performs well in reactor. The requirement to satisfactory irradiation performance under normal operating conditions is primarily demonstrated by a successful testing. Since each reactor employs distinct fuel plate geometries for various consideration with unique plate design features and attributes, a single “generic” plate geometry capturing all of the extremities is not achievable. Furthermore, testing all these geometric and irradiation parameters on a large size plate is not practical. Therefore, a smaller, “down-scaled” versions of fuel plates, are often employed for experimental purposes. This limitation consequently requires much more cautious performance evaluations, as thermal and mechanical response of a plate with certain geometry may not be representative for a plate with a different geometry. To investigate if plate size has any effects on irradiation performance, the plates with various geometric dimensions were parametrically evaluated. In particular, length and width of the plates were varied between the bounding values. Temperature, deformation, stress values were comparatively evaluated. The results have indicated that effects of geometric ratios and plate size variations in length and width directions are insignificant. However, wider plates could become more prone to a warping-type deformation, if there are nonlinearities.

42 ENGINEERING↗
DOE OSTI2019

Size effects on thermo-mechanical performance of U-10Mo monolithic fuel plates

Monolithic fuel is a fuel form that is considered for the conversion of high performance research reactors. This plate-type fuel consists of a high density U-Mo fuel in monolithic form that is sandwiched between zirconium diffusion barriers, and encapsulated in an aluminum cladding. To date, large number of plates have been irradiated with satisfactory perforamce. The program is now moving into the qualification phase, a predecessor to the timely conversion of the target reactors. It must be shown that the fuel system meets the safety standards and performs well in reactor. The requirement to satisfactory irradiation performance under normal operating conditions is primarily demonstrated by a successful testing. Since each reactor employs distinct fuel plate geometries for various consideration with unique plate design features and attributes, a single “generic” plate geometry capturing all of the extremities is not achievable. Furthermore, testing all these geometric and irradiation parameters on a large size plate is not practical. Therefore, a smaller, “down-scaled” versions of fuel plates, are often employed for experimental purposes. This limitation consequently requires much more cautious performance evaluations, as thermal and mechanical response of a plate with certain geometry may not be representative for a plate with a different geometry. To investigate if plate size has any effects on irradiation performance, the plates with various geometric dimensions were parametrically evaluated. In particular, length and width of the plates were varied between the bounding values. Temperature, deformation, stress values were comparatively evaluated. The results have indicated that effects of geometric ratios and plate size variations in length and width directions are insignificant. However, wider plates could become more prone to a warping-type deformation, if there are nonlinearities.

42 ENGINEERING↗
DOE OSTI2025

Development of a thermal creep model for aluminum alloy 6061 cladding in U-10Mo monolithic fuel plates

Plate-type fuel elements consisting of a high-density, low-enriched uranium (LEU) U–10Mo-based fuel foil encapsulated in an aluminum alloy (AA) cladding are fabricated using the hot isostatic pressing (HIP) technique. During the HIP process, the fuel plate system is heated to 560 °C, then cooled to room temperature. This heat cycle significantly affects the mechanical properties of the aluminum cladding, and experimental investigations have shown that, post-HIP bonding, the mechanical properties of the aluminum cladding transition from those of AA 6061-T6 to something closer to the O temper. More specifically, the ultimate strength of the cladding decreases while its ductility increases, making it challenging to capture the changes in mechanical behavior and material properties. Understanding the residual stresses generated during the HIP process is critical for assessing the fuel plate’s integrity under various temperature, pressure, and irradiation. To simulate the HIP bonding process, the elastic, plastic, and thermal properties of the cladding are assumed to be similar to those of AA 6061-O temper. However, the primary challenge lies in the lack of available data for the creep model of the AA 6061 cladding during this transient process of HIP. The present study focuses on developing a computational model that predicts the creep behavior of the aluminum cladding in the fuel plates during the HIP process, as cladding creep significantly influences the residual stresses generated in U-10Mo fuel plates during HIP fabrication. Furthermore, as HIP bonding occurs at high temperatures that are nearing the melting point of aluminum, the present work considered a temperature-dependent Arrhenius-type creep model. In particular, a hyperbolic sine creep model is employed to estimate the creep properties of the as-fabricated aluminum cladding. In conclusion, the residual stresses predicted in the U-10Mo fuel when using the newly calibrated creep model closely align with the experimental measurements, validating the model’s accuracy.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Effects of fuel thickness on thermal and mechanical performance of U10-Mo monolithic fuel plates

Monolithic fuels are being considered for conversion of high performance research and test reactors. These plate-type fuels are comprised of a low enrichment, high density U-Mo alloy fuels within an aluminum cladding. Although the plates have demonstrated satisfactory performance; still, use of a high density fuel in a foil form retains technical challenges that could affect the overall performance. To understand performance of this new design during fabrication and irradiation, the plates have been evaluated for various geometrical and operational variables. As a part of these set of parametric sensitivity studies, effects of foil thickness on performance were studied. Because high performance research reactors will utilize different fuel thicknesses, it is necessary to evaluate possible effects for a range of thicknesses that are being considered for various designs. Based on the preliminary design specifications, the fuel thicknesses were varied between the limiting cases. The bounding fuel thicknesses were 0.203 mm as minimum that is projected for ATR, and 0.635 mm as maximum that is projected for MITR. To study possible effects, a behavioral model was developed for a selected plate from RERTR-12 experiments and the plate was simulated with as run irradiation history. The simulations were repeated for a range of fuel thicknesses, while keeping the cladding thickness and the operational parameters the same. The results have indicated that the plates with thicker fuels would have higher temperatures, deformations and shutdown stresses. To investigate the effects of fuel thickness exclusively, operational parameters were scaled. In particular, a second set of simulations with prorated volumetric heat generation rates were performed. The results indicated that the fabrication stresses in the fuel foil decrease with an increasing fuel thickness. On contrary, irradiation stresses of the fuel at shutdown are higher for the plates with thicker fuels. Greater peak deformations occurred in plates with thicker fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Assessment of Cladding-Cladding Delamination Failures in U-Mo Fuel Plates

Monolithic fuel is a candidate fuel form for the conversion of high-performance research reactors. This plate-type fuel consists of a high-density, U-Mo alloy-based fuel in a monolithic form that is sandwiched between zirconium diffusion barriers and encapsulated in an aluminum cladding. To qualify this fuel system, the program must demonstrate that the fuel meets the safety standards, has a predictable behavior, and performs well in a reactor. Although many plates have shown satisfactory thermo-mechanical performance in reactor, a small number of experimental plates exhibited failures, rendering performance of these plates unacceptable. Post-irradiation examinations of failed plates have revealed that various failures modes are present, including pillowing, blistering, buckling, warping, delamination, fracture, rupture, oxide spallation, etc. Previous studies have implied that such various operational and loading conditions could generate a complex stress-strain state, facilitating distinct failure modes that could impact the structural integrity. To understand such various failure modes, a comprehensive set of studies focusing on failure modes is being performed. As a part of these studies, this work studies the cladding-cladding separation failures that were observed in some of previous irradiation tests. To understand the root cause of cladding separation failures, selected plates from previous irradiation experiments were simulated under comparable operational conditions. Stress-strain state of the plates at the interface were examined. The results were comparatively evaluated to understand possible effects of stress state of the bond-line on delamination failures. This paper presents these findings, discusses such failure modes, and examines the influence of various factors on previously observed cladding delamination failures.

42 ENGINEERING↗
DOE OSTI2022

Thermal Model of Oxide Growth for Full Size Fuel Plate Experiments in the Advanced Test Reactor

The full-size plate number one (FSP-1) irradiation test designed for irradiation testing of plate type fuel is planned to be irradiated in the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL). This FSP-1 experiment is a non-instrumented drop-in test where aluminum-clad fuel plates are cooled directly by the ATR Primary Coolant System (PCS) water. This experiment is one of a series of experiments being irradiated at ATR for the United States High Performance Research Reactor (USHPRR) program. This fueled experiment contains aluminum-clad fuel full-size plates consisting of monolithic U-10Mo. Previous thermal analyses have been documented concerning oxide growth [1] and thermal safety margins [2] for similar U-10Mo mini plate experiments. This analysis is part of the thermal safety analysis of the experiment to be irradiated in ATR. Departure from nucleate boiling ratio (DNBR) and flow instability ratio (FIR) have been calculated for the flow coastdown condition 2 and the reactivity insertion accident condition-2 (RIA2) transient. The purpose of this paper is to investigate the thermal margin of the fuel meat during a RIA2 transient when oxide has accumulated on the plate surfaces acting as an insulator.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

STAT7 v1.2 User Guide: The STAT7 Code for Statistical Propagation of Uncertainties in Steady-State Thermal Hydraulics Analysis of Plate-Fueled Reactors

The STAT7 software was developed to perform steady-state, single-phase thermal hydraulics analysis of plate-fueled reactors based on statistical propagation of uncertainties. Application of the software is for non-power research and test reactors, including conversion to low-enriched uranium fuel of U.S. High-Performance Research Reactors such as Massachusetts Institute of Technology Research Reactor. Since it can be necessary to repeat analysis during fuel reloading, STAT7 accommodates flexibility in analyzing many realistic aspects of reactor fuel management. STAT7 uses a Monte Carlo approach to model uncertainty in common fuel fabrication parameters and other key reactor operating parameters required for thermal hydraulics analyses of research and test reactors. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux, or onset of flow instability. STAT7 supports water properties based on the IAPWS-IF97 functions (The International Association for the Properties of Water and Steam Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam) in addition to the fit functions. STAT7 predicts axial profiles of fuel, cladding, and coolant temperature along a lateral stripe that runs the full length of the fuel plate from the bottom to the top. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one latera stripe of a fuel element. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis can be performed by analyzing the margin to onset of nucleate boiling and onset of flow instability for each axial node of each stripe of each plate of each fuel element in the core.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

The porosity surrounding carbides and second phase stringers in monolithic U-10Mo fuel plate after irradiation

Post-irradiation microstructure characterization plays an important role in qualifying the low-enriched uranium (LEU) monolithic U-10 wt%Mo plate-type fuel for United States high-performance research reactors (USHPRRs) program. Inhomogeneous features resulting from manufacturing and irradiation processes, including carbides, second phase stringers, and extensive void spaces caused by the combining of small porosities, may increase the risk of heat concentration in local regions of the fuel plate over the operating conditions. In this study, characteristics of carbides, stringers, and porosity after multiple levels of irradiation at varying fission densities were studied by electron microscopes to decipher the morphology of pores and the porosity evolution in U-10 wt%Mo. For carbides, the result shows that porosities start forming on UMo grain boundaries, then on UMo/carbides interfaces as the burn-up going higher. However, the porosities surrounding carbides grow larger than the ones on UMo grain boundaries. The porosities around the uranium carbides could interconnect to form larger void space. The study revealed that the void spaces larger than 5 µm were found around uranium carbides after high burnup, while no evidence was observed to support the similar voids formed near second phase stringers even though the size of the stringers (> 50 µm) was much larger than uranium carbides (< 20 µm). The evolution of porosities suggests that the formation of second phase stringers may not create more significant porosities compared to regular uranium carbides regions during fuel operating conditions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗