Search NASA⌕ Search

SEARCH · Search NASA

Results for “FWHM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

The Effects of Experimentally Induced Zircon Annealing on Melt Inclusion-Zircon Geochemistry: A Case Study of Archean Zircon From the Barberton Complex

Crystalline melt inclusions (MIs) in Archean zircons can potentially constrain the evolution of magmatic processes. However, to obtain a homogeneous glassy MI representative of the parent melt, devitrified MIs must be heated at temperatures above the liquidus. Although, it is well known that radiation damaged domains in MI-host zircon undergo temperature-time dependent annealing, the effects of annealing on zircon stable isotope and trace element compositions has received less attention. In this study, we heated multiple aliquots of low-magnetism zircons with relatively low levels of radiation damage (Deff<9.6x1014 α-events/mg) from a 3.304 Ga tonalite gneiss xenolith from the Barberton greenstone belt (sample B87-18; Kamo and Davis, 1994) in an internally-heated pressure vessel at 0.4GPa and 1000–1200°C. Zircons were imaged by SEM (CL, BSE) to determine the zoning patterns around the MIs. The radiation damage preserved in the heated and unheated zircons was determined by measuring broadening of the 3(SiO4) Raman stretching band of zircon (FWHM). Oxygen isotope ratios (δ18O), OH/O ratios, and trace and rare earth element (TREE) concentrations were measured in the zircons and MIs using SIMS. The FWHM and Raman shift of the zircon 3(SiO4) band show a systematic increase of zircon crystallinity with increasing experimental temperature. Despite increasing crystallinity, the 3(SiO4) FWHM is not correlated with δ18O(Zrn) values in the heated or unheated zircons, suggesting that δ18O was not altered by laboratory heating in these low initial radiation damage zircons. FWHM and OH/O are positively correlated in both heated and unheated zircons. The unheated zircons have the largest FWHM and OH/O (OH/OMAX=3.5×10-4) suggesting that H2O was lost during experimental heating due to the progressive annealing of radiation-damaged domains in the zircons. Zircon TREE concentrations and FWHM values are not correlated despite the presence of TREE altered domains in both the heated and unheated zircons. Our results demonstrate that pre-experimental zircon TREE concentrations and δ18O(Zrn) remain intact during laboratory heating of crystalline MIs in zircon, while secondary H2O hosted in radiation damaged domains is partially lost. Thus, MIs in low initial radiation damage Archean zircon are a potentially viable tool for constraining melt compositions.

Joseph P. Gonzalez↗
NASA NTRS1994

The intermediate line region of QSOs

Our recent statistical investigations of broad UV lines of luminous quasars (QSOs) suggest that the traditional broadline region (BLR) consists of two components-one of width approximately 2000 km/s FWHM with the peak within a few hundred kilometers per second of the systemic redshift, and another very broad component of width greater than or equal to 7000 km/s FWHM and blueshifted by greater than or equal to 1000 km/s. Differences in the relative strengths of these components account for much of the diversity of broad-line profiles, as well as relations among line strength, line width, asymmetry, and peak blueshift. We have suggested that the narrower component arises in a distinct intermediate-line region (ILR) that is an inner extension of the narrow-line region (NLR). We form spectra of the ILR and very broad line region (VBLR) in two complementary ways. First, using a small sample of high-quality spectra, we difference two composite spectra, one with FWHM (sub C IV) approximately 3000 km/s, the other with FWHM (sub C IV) approximately 7000 km/s (essentially a VBLR spectrum)-revealing a narrower line spectrum with FWHM approximately 2000 km/s. Second, we use a principal component analysis of 200 low signal-to-noise ratio spectra from the Large Bright Quasar Survey. The ILR is identified with the first principal component-that component accounting for most of the spectrum-to-spectrum variation. The VBLR spectrum is derived by subtracting this ILR from the mean spectrum. The two methods yield similar results, and the spectra of the ILR and VBLR are very different. Additional support for the existence of two component is the lack of a correlation between the equivalent widths of the ILR and VBLR. We discuss the relationships between the VBLR, the ILR, and the traditional NLR. The ILR line intensity ratios are distinctly different from those of the VBLR, with (relative to C IV lambda 1549) stronger Lyman alpha and weaker N v lambda 1240, lambda 1400 feature, He II lambda 1640, O III lambda 1663, and Al III lambda 1860. Comparison with other active galactic nuclei (AGN) emission-line regions shows that the ILR spectrum tends to be intermediate between that of the VBLR and that of gas more distant from the ionizing continuum, such as the NLR and extended Lyman alpha nebulosity. Comparison of the spectra with results from photoionization models suggests that, compared with the VBLR, the ILR is about 10 times more distant from the ionizing continuum (approximately 1 pc), 100 to 1000 times less dense (10(exp 10)/cu cm), and has a smaller covering factor (less than or approximately 3%, compared with approximately 24% for the VBLR).

Brotherton, M. S.↗
NASA NTRS2019

Multiabsorber Transition-Edge Sensors for X-Ray Astronomy

We are developing arrays of position-sensitive microcalorimeters for future x-ray astronomy applications. These position-sensitive devices commonly referred to as hydras consist of multiple x-ray absorbers, each with a different thermal coupling to a single-transition-edge sensor microcalorimeter. Their development is motivated by a desire to achieve very large pixel arrays with some modest compromise in performance. We report on the design, optimization, and first results from devices with small pitch pixels (<75 μm) being developed for a high-angular and energy resolution imaging spectrometer for Lynx. The Lynx x-ray space telescope is a flagship mission concept under study for the National Academy of Science 2020 decadal survey. Broadband full-width-half-maximum (FWHM) resolution measurements on a 9-pixel hydra have demonstrated ΔE(FWHM) = 2.23 ± 0.14 eV at Al-Kα, ΔE(FWHM) = 2.44 ± 0.29 eV at Mn-Kα, and ΔE(FWHM) = 3.39 ± 0.23 eV at Cu-Kα. Position discrimination is demonstrated to energies below <1 keV and the device performance is well-described by a finite-element model. Results from a prototype 20-pixel hydra with absorbers on a 50-μm pitch have shown ΔE(FWHM) = 3.38 ± 0.20 eV at Cr-Kα1. We are now optimizing designs specifically for Lynx and extending the number of absorbers up to 25/hydra. Numerical simulation suggests optimized designs could achieve ∼3 eV while being compatible with the bandwidth requirements of the state-of-the art multiplexed readout schemes, thus making a 100,000 pixel microcalorimeter instrument a realistic goal.

Smith, Stephen J.↗
NASA NTRS1981

Properties of an imaging gas scintillation proportional counter

An instrument which combines the improved energy resolution offered by the gas scintillation proportional counter (GSPC) with the submillimeter imaging capabilities of the multiwire proportional counter (MWPC) is described. The imaging gas scintillation proportional counter detects the centroid of the UV light excited by X-ray photons interacting in the noble gas of the GSPC with a UV sensitive gas in the MWPC. The prototype counter yields a measured performance of 9% (FWHM) energy resolution and 0.9 mm (FWHM) spatial resolution at 6 keV. Further design refinements should achieve 18% (FWHM) energy resolution and 0.6 mm (FWHM) spatial resolution at 1 keV.

Ku, W. H.-M.↗
NASA NTRS1983

An imaging gas scintillation proportional counter for use in X-ray astronomy

An imaging gas scintillation proportional counter (GSPC) has been constructed for use in X-ray astronomy. The IGSPC consists of a gas scintillation proportional counter (GSPC) with a 1 micron polypropylene window coupled to a multiwire proportional counter (MWPC) via a calcium fluoride window. The MWPC, filled with a mixture of argon, methane, and tetrakis (dimethylamino) ethylene, detects the UV photons emitted by the xenon gas in the GSPC. The measured energy resolution is 17.0 percent (fwhm) and 8.0 percent (fwhm) at 1.5 keV and 5.9 keV, respectively. The measured position resolution is 1.9 mm (fwhm) and 0.9 mm (fwhm) at 1.5 and 5.9 keV, respectively. Possible astrophysical observations which can be performed with an IGSPC at the focal plane of a grazing incidence telescope are also discussed.

Hailey, C. J.↗
NASA NTRS1987

An imaging study of NGC 1275 and PKS 0745-191 - Vigorous star formation in cooling flow cluster dominant galaxies

Observations of NGC 1275 and PKS 0745-191, obtained at 8290 A (FWHM 1900 A) and 4506 A (FWHM 355 A) using a UV-flooded 800 x 800 CCD detector on the 2.3-m telescope at Steward Observatory on December 9, 1986, are reported along with additional observations of PKS 0745-191 at 7240 A (FWHM 78 A) and 6737 A (FWHM 86 A). The results are presented graphically and analyzed in detail. Both of these cluster-central galaxies are shown to have strong cooling flows, total H-alpha luminosities of 4.8 x 10 to the 42nd erg/s, large color gradients (bluer centers), and a blue excess relative to normal old elliptical galaxies (probably indicating star formation at a few times 10 solar mass/yr).

Romanishin, W.↗
NASA NTRS1994

Nondestructive evaluation of fatigue damage in aluminum 2024 by x-ray diffraction

Aluminum alloys are widely used in the automobile and aerospace industries. This is due to their attractive low density-high modulus and low density-high strength characteristics. Unfortunately, cyclic stress-strain deformations alter the microstructure of aluminum alloys when they are placed into service. These structural changes can lead to fatigue damage and ultimately service failure. Since x-ray diffraction analysis is known to be a sensitive nondestructive indicator of structural changes due to deformations, this technique is being used to evaluate changes in the microstructure of cycled aluminum 2024 commercial alloys. Line shapes, widths, and positions in an x-ray diffraction pattern depend on microstructural properties such as grain size, grain orientation, residual stress, microstrain, etc. Changes in the microstructure due to fatigue will appear as changes in the diffraction pattern. One parameter used to characterize a reflection in a diffraction pattern is the full width at half maximum (FWHM). Preliminary x-ray diffraction results on cycled Al 2024 indicate that the (111) and (222) reflections of the matrix phase do not show any variations in the FWHM due to an increase in the fatigue cycles. However, the FWHM of the (200) and (400) reflections of the same phase unexpectedly showed a dramatic decrease. These results can be interpreted as due to the relaxation of some initial nonuniform residual stresses in the matrix phase lattice. Further work is in progress to evaluate the FWHM of the second phase of the cycled alloys.

Ferguson, Milton W.↗
NASA NTRSDate not supplied

Determining True Sensor Spatial Resolution of Very High Resolution Optical Imagery

Some satellite data is delivered in images with gridded pixels. This gridded pixel size is often assumed to be the spatial resolution of the satellite sensor; however, this is not always the case. An image can be grided to any arbitrary pixel size, but the sensor resolution will remain constant. For example, an image with a pixel grid size much smaller than the sensor resolution will appear blurry along what should be sharp transitions. This discrepancy between an image’s pixel size and true sensor spatial resolution can be the source of much confusion and even misinformation among data users, which may lead them to waste time and resources on using images that do not suit their spatial resolution needs. This presentation will highlight our evaluation of the true spatial resolution of various government and commercial images in the pixel size range of 0.3 m to 60 m. Images evaluated include ESA’s Sentinel-2 (60 m, 20 m, 10 m pixels), USGS’s Landsat 8/9 (30 m & 15 m pixels), Planet’s SuperDoves (3 m pixels), BlackSky’s Globals (~1 m pixels), and the optical bands of Maxar’s WorldView-2 (2.4 m – 0.41 m pixels) and WorldView-3 (1.38 m – 0.31 m pixels). Our evaluation of true sensor spatial resolution, or ‘footprint size’ is based on the sensor’s line spread function (LSF). We calculate the width at half the height of the LSF to find the full width at half maximum (FWHM). The FWHM is how we report sensor spatial resolution. Different objects are examined for constructing the LSF depending on the sensor spatial resolution. Coarser resolution sensors in this evaluation such as Sentinel-2 and Landsat 8/9 are examined at bridges over a dark water background. The bright bridge acts as a line impulse, giving a sensor’s line spread function (LSF) in one direction. Additionally, we simulate the impacts of bridge width on the apparent LSF to obtain a true LSF without the effects of bridge width for these sensors. Finer resolution sensors will image the irregularities in bridges such as trusses, sidewalks, and in some cases painted lines, interfering with the LSF construction. Instead, these sensors are evaluated at large (60 m – 140 m) black and white checkerboards known as Cal/Val sites. At these locations, the image’s transition from black to white is extracted as an edge spread function (ESF). We calculate the derivative of this ESF to obtain the sensor’s LSF. From there, we find the FWHM as we do for the coarser resolution images. With the FWHM and pixel size, we determine how over- or under-sampled the images are. When the ratio of a sensor’s spatial resolution and the gridded image’s pixel size is less than 1, the image is considered under-sampled. In this case, each pixel’s information is unique but only a portion of that pixel’s ground area has been measured. On the other side, if the ratio is greater than 1, the image is considered over-sampled. That is, each pixel’s information is sourced from within the ground extent of the pixel and some extent outside additionally. We will show the true spatial resolution and the extent of over-/under-sampling in the imagery from ESA’s Sentinel-2 (60 m, 20 m, 10 m pixels), USGS’s Landsat 8/9 (30 m & 15 m pixels), Planet’s SuperDoves (3 m pixels), BlackSky’s Globals (~1 m pixels), and the optical bands of Maxar’s WorldView-2 (2.4 m – 0.41 m pixels) and WorldView-3 (1.38 m – 0.31 m pixels).

Alana Semple↗
NASA NTRS1985

A thick Anger camera for gamma-ray astronomy

The NaI(Tl) Anger camera is a natural candidate for a position sensitive detector in imaging of astrophysical gamma-ray sources. Here laboratory measurements are presented of the response of a relatively thick (5.1 cm) NaI(Tl) Anger camera designed for coded aperture imaging in the 50 keV to 2 MeV energy range. A position resolution of 10.5 mm FWHM at 122 keV and 6.3 mm FWHM at 662 keV. The energy resolution was 7 percent FWHM at 662 keV. The ability of the detector to resolve the depth of the gamma-ray interaction and the use of this depth resolution to reduce back-incident and internal background is discussed.

Cook, W. R.↗
NASA NTRS1984

A large area imaging gas scintillation proportional counter for use in X-ray astronomy

A large area (200 sq cm), broad bandwidth (0.1-70 keV), imaging gas scintillation proportional counter (IGSPC) has been constructed for use in X-ray astronomy. The IGSPC consists of a high pressure xenon gas scintillation proportional counter (GSPC) coupled to a multi-wire proportional counter (MWPC) via a calcium fluoride window. THe MWPC, filled with a mixture of argon, methane, and tetrakis (dimethylamino) ethylene, detects the UV photons emitted by the xenon gas in the GSPC. The detector has a measured energy resolution of 8.0 percent (FWHM) and 4.3 percent (FWHM) at 5.9 keV and 22.1 keV, respectively. The predicted spatial resolution of the detector is less than 1 mm (FWHM) between 3-22 keV and 37-60 keV. A method to determine the three-dimensional location of detected X-rays is described. In addition, a combination of discrimination schemes designed to reduce the non-X-ray background in the IGSPC by more than two orders of magnitude is discussed.

Ku, W. H.-M.↗
NASA NTRS1986

Low energy X-ray spectra measured with a mercuric iodide energy dispersive spectrometer in a scanning electron microscope

A mercuric iodide energy dispersive X-ray spectrometer, with Peltier cooling provided for the detector and input field effect transistor, has been developed and tested in a scanning electron microscope. X-ray spectra were obtained with the 15 keV electron beam. An energy resolution of 225 eV (FWHM) for Mn-K(alpha) at 5.9 keV and 195 eV (FWHM) for the Mg-K line at 1.25 keV has been measured. Overall system noise level was 175 eV (FWHM). The detector system characterization with a carbon target demonstrated good energy sensitivity at low energies and lack of significant spectral artifacts at higher energies.

Iwanczyk, J. S.↗
NASA NTRS1987

Delay line anodes for microchannel-plate spectrometers

A photon-counting readout system for microchannel-plate spectrometers is described that uses a delay line and timing circuit for the wavelength coordinate and a wedge-wedge charge division system for the orthogonal spatial coordinate. A novel zigzag layout allows these two anode patterns to coexist on a common planar substrate and share the charge from each photoevent, thereby simultaneously localizing the photon in each of its two dimensions. Unlike wedge-and-strip or resistive anode encoders, the delay line offers a spatial resolution that is relatively independent of the format length. Unlike discrete anode systems, the delay line readout system's complexity is also independent of the field of view size. These facts make the delay line readout system advantageous in large format detectors. A testbed detector having a delay line propagation speed of 2.2 mm/ns and a time resolution of 33 ps FWHM has been assembled. Ultraviolet testing shows a Gaussian event distribution having a 70-micron FWHM width; the readout system blur contribution is less than 50-micron FWHM.

Lampton, M.↗
NASA NTRS1988

Resonance scattering by sodium in Mercury's atmosphere. I - The effect of phase and atmospheric smearing

The dependence of the intensity in the sodium D1 and D2 lines on the planetary phase and position of the disk is presented. Theoretical intensities are convolved with an atmospheric point spread function with FWHM of 0.5 and 2.0 arcsec for planetary phases 60 and 90 deg. It is shown that although the absolute intensities are extremely dependent on seeing, the I(D2)/I(D1) ratio remains a reliable indicator of column abundance regardless of the seeing function. For a uniform distribution of sodium, limb brightening will be apparent for a seeing disk with FWHM of 0.5 arcsec but will not be apparent for a FWHM of 2.0 arcsec.

Killen, R. M.↗
NASA NTRS1992

Results from a Si(Li) gamma ray detector stack for future Mars missions

We present Monte Carlo analysis and experimental data from a novel lithium-drifted silicon detector stack for gamma ray spectroscopy instrumentation in future Mars surface landers and other planetary missions. The Monte Carlo analysis shows full energy photopeaks even in the range of about 100 keV to 2 MeV where, in Si, Compton scattering dominates the absorption processes. Laboratory data is shown for an experimental detector stack of four planar Si(Li) devices, each 5 mm thick with an active area 2 cm in diameter. All the experimental data were collected with maximum temperature of the stack at 175 K. Background reduction is achieved by using the detector of the stack closest to the source in anticoincidence. We present a comparison of experimental data from the stack with the Monte Carlo model for Cs-137 (662 keV). Agreement is shown to be good, with a full energy photopeak clearly seen (FWHM about 10 keV). Experimental stack data is also shown for multiple peaks at 511 keV (Na-22) and 662 keV (Cs-137). The peaks are clearly resolved (FWHM 10 keV), and are compared with the results obtained using a 8 percent resolution, 3 in. x 3 in. NaI(TI) device (FWHM about 50 keV).

Hubbard, G. S.↗
NASA NTRS1995

An improved spectral calibration requirement for AVIRIS

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) measures spectra from 400 to 2500 nm through 224 contiguous spectral channels. These spectra are used to identify and determine the abundances of constituents of the earth's surface and atmosphere through the analysis of spectral molecular absorptions and scattering properties of materials. Spectral calibration of the AVIRIS is required to pursue these determinations, which are based on these fundamental spectral characteristics. The spectral calibration of AVIRIS consists of a description of the spectral response function for each of the 224 spectral channels. The spectral response function of AVIRIS channels was measured in the laboratory and shown to be Gaussian in shape. A subset of nine AVIRIS spectral channels is shown with channel centers at 10 nm intervals and channel shapes of Gaussian form with 10 nm full width and half maximum (FWHM). For AVIRIS the spectral calibration is described by the spectral center and FWHM of a Gaussian function for each channel. Uncertainty in the determination of the spectral center and FWHM for each channel are also reported. This paper presents results from an investigation of the sensitivity of AVIRIS-measured upwelling radiance to errors in spectral calibration. Based on this sensitivity analysis in conjunction with earlier work, an improved spectral calibration requirement for AVIRIS is proposed.

Green, Robert O.↗
NASA NTRS1994

The peculiar type II supernova 1993J in M81: Transition to the nebular phase

We present optical spectra of the bright, peculiar Type II supernova 1993J in M81 spanning the first 14 months of its existence, revealing its transition to the nebular phase. Unlike the case in normal Type II supernovae, during the first 2-10 months the H-alpha emission line gradually becomes less prominent relative to other features such as (O I) lambda lambda 6300, 6364 and (Ca II) lambda lambda 7291, 7324, as we had predicted based on early-time (tau less than or approximately equal to 2 months) spectra. The nebular spectrum resembles those of the Type Ib/Ic supernovae 1985F and 1987M, although weak H-alpha emission is easily visible even at late times in SN 1993J. At tau = 8 months a close similarity is found with the spectrum of SN 1987K, the only other Type II supernova known to have undergone such a metamorphosis. The emission lines are considerably broader than those of normal Type II supernovae at comparable phases, consistent with the progenitor having lost a majority of its hydrogen envelope prior to exploding. Consequently, there is now little doubt that Type Ib, and probably Type Ic, supernovae result from core collapse in stripped, massive stars; models of the chemical evolution of galaxies in which these subtypes are ascribed to exploding white dwarfs must be appropriately modified. Although all of the emission lines in spectra of SN 1993J fade roughly exponentially for a considerable time, the fading of H-alpha begins to slow down at tau approximately = 8 months, and in the interval tau = 10-14 months its flux is constant, or even slightly rising in the wings of the line. This behavior, together with the box-like shape and great breadth (full width at half maximum (FWHM) approximately = 17 000 km/s) of the line profile, suggests that the H-alpha emission is being produced by the high-velocity outer layer of hydrogen ejecta interacting with circumstellar gas released by the progenitor prior to its explosion. A similar phenomenon has previously been seen at later phases in several Type II supernovae, most notably SN 1980K. Bumps (FWHM approximately = 1000 km/s, amplitude approximately = 20%) in the H-alpha profile are probably indicative of Rayleigh-Taylor instabilities in the cool gas behind the reverse shock. A very narrow component (unresolved, FWHM less than or approximately equal to 200 km/s) of H-alpha at the symmetric velocity of SN 1993J may instead be produced by a superposed H II region, or perhaps by recombination in a large circumstellar shell or ring that was ionized during the first few hours after outburst. In the near future the spectrum of SN 1993J should become increasingly dominated by broad H-alpha emission.

Filippenko, Alexei V.↗
NASA NTRS1994

The impact of SN 1987A with its circumstellar ring

The envleope of SN 1987A will strike its circumstellar ring in 12 +/- 3 yr after explosion (A.D. 1999+/-3), the exact time depending weakly on the uncertain density of diffuse gas between the supernova and the ring. The impact will drive a radiative shock into the ring with velocity approximatley 200-400 km s(exp -1). The shocked ring will become a bright optical and ultraviolet emsiison-line source. A bright arc will suddenly appear at the near side of the ring and grow into an entire ring about 11 months later. The luminosities of the brightest lines, H-alpha H-alpha, N v lambda lambda 1238, 1242, and O VI lambda lambda 1032, 1038 will rise rapidly to approxminately 10(exp 36)-10(exp 37) ergs s(exp -1) and remain bright for several years after impact. The emission lines from the shocked ring will have FWHM approximatley 300-600 km s(exp -1) and complex profiles that will depend on position and will be sensitive to the details of the density distribution of gas in the ring. Strong EUV radiation from the shock will photoionize the unshocked ring, causing emission of narrow FWHM equivalent to 15 km s(exp -1) H-alpha, H-beta and (O III) lambda lambda 4959, 5007 lines with luminosities approximatley 10(exp 35) ergs s(exp -1).The EUV radiation will probably cause the nebulosity beyond the ring to become visable again. The EUV radiation may also illuminate the unshocked outer supernova envelope, causing visible emission of broad FWHM equivalent to 10(exp 4) km s(exp -1) H-alpha and H-beta lines.

Luo, Ding↗
NASA NTRS1996

Spectra of High-Ionization Seyfert 1 Galaxies: Implications for the Narrow-Line Region

We present line profiles and profile parameters for the Narrow-Line Regions (NLRs) of six Seyfert 1 galaxies with high-ionization lines: MCG 8-11-11, Mrk 79, Mrk 704, Mrk 841, NGC 4151, and NGC 5548. The sample was chosen primarily with the goal of obtaining high-quality [Fe VII] lambda6087 and, when possible, [Fe X] lambda6374 profiles to determine if these lines are more likely formed in a physically distinct 'coronal line region' or are formed throughout the NLR along with lines of lower critical density (n(sub cr)) and/or Ionization Potential (IP). We discuss correlations of velocity shift and width with n(sub cr) and IP. In some objects, lines of high IP and/or n(sub cr) are systematically broader than those of low IP/n(sub cr). Of particular interest, however, are objects that show no correlations of line width with either IP or n(sub cr). In these objects, lines of high and low IP/n(sub cr), are remarkably similar, which is difficult to reconcile with the classical picture of the NLR, in which lines of high and low IP/n(sub cr) are formed in physically distinct regions. We argue for similar spatial extents for the flux in lines with similar profiles. Here, as well as in a modeling-oriented companion paper, we develop further an idea suggested by Moore & Cohen that objects that do and do not show line width correlations with IP/n(sub cr) can both be explained in terms of a single NLR model with only a small difference in the cloud column density distinguishing the two types of object. Overall, our objects do not show correlations between the Full Width at Half-Maximum (FWHM) and IP and/or n(sub cr). The width must be defined by a parameter that is sensitive to extended profile wings in order for the correlations to result. We present models in which FWHM correlations with IP and/or n(sub cr) result only after simulating the lower spectral resolution used in previous observational studies. The models that simulate the higher spectral resolution of our observational study produce line width correlations only if the width is defined by a parameter that is more sensitive to extended profile wings than is the FWHM. Our sample of six objects is in effect augmented by incorporating the larger sample (16 objects) of Veilleux into some of our discussion. This paper focuses on new interpretations of NLR emission-line spectra and line profiles that stem directly from the observations. Paper 2 focuses on modeling and complements this paper by illustrating explicitly the effects that spatial variations in electron density, ionization parameter, and column density have on model profiles. By comparing model profiles with the observed profiles presented here, as well as with those presented by Veilleux, Paper 2 yields insight into how the electron density, ionization parameter, and column density likely vary throughout the NLR.

Moore, David↗